Crystallinity and structuring role of water in native and recrystallized starches by C CP-MAS NMR spectroscopy: 1: Spectral decomposition

Amorphous, native, and recrystallized starches were studied by ¹³C CP-MAS NMR spectroscopy with respect to their behavior with hydration. The study of space groups, associated to crystalline polymorphs (B2 and P6₁ for A and B forms, respectively), provided decomposition rules for the spectral part due to crystalline phases. Moreover, the subtraction of a standard amorphous spectrum apparently showed the existence of three phases in native starches (amorphous, partially-ordered and crystalline) and only two in spherulitic crystals (partially-ordered and crystalline). The proportion of each phase was estimated at two different hydration levels. The amount of crystalline phase was compared to the degree of crystallinity as evaluated by wide angle X-ray scattering. The NMR spectral changes with hydration could be interpreted in terms of two complementary roles of water molecules, i.e. structuring and plasticizing.     

Monitoring the crystallization of amylose–lipid complexes during maize starch melting by synchrotron x‐ray diffraction

Most starch granules exhibit a natural crystallinity, with different diffraction patterns according to their botanical origin: A‐type from cereals and B‐type from tubers. The V polymorph results essentially from the complexing of amylose with compounds such as iodine, alcohols, or lipids. The intensity and nature of phase transitions (annealing, melting, polymorphic transitions, recrystallization, etc.) induced by hydrothermal treatments in crystalline structures are related to temperature and water content. Despite its small concentration, the lipid phase present mainly in cereal starches has a large influence on starch properties, particularly in complexing amylose. The formation of Vh crystalline structures was observed by synchrotron x‐ray diffraction in native maize starch heated at intermediate and high moisture contents (between 19 and 80%). For the first time, the crystallization of amylose–lipid complexes was evidenced in situ by x‐ray diffraction without any preliminary cooling, at heating rates corresponding to the usual conditions for differential scanning calorimetry experiments. For higher water contents, the crystallization of Vh complexes clearly occurred at 110–115°C. For intermediate water contents, mixed A + Vh (or B + Vh for high amylose starch) diffraction diagrams were recorded. Two mechanisms can be involved in amylose complexing: the first relating to crystallization of the amylose and lipid released during starch gelatinization, and the second to crystalline packing of separate complexed amylose chains (amorphous complexes) present in native cereal starches. © 1999 John Wiley & Sons, Inc. Biopoly 50: 99–110, 1999     

Structure of lintnerized starch is related to X-ray diffraction pattern and susceptibility to acid and enzyme hydrolysis of starch granules

Acid-resistant residues (lintnerized starches, Ls) were prepared from starches showing A-, B- and C- X-ray diffraction patterns. Ls retained the same X-ray crystalline type as their native counterparts with an improvement in diffraction intensity. Fluorophore-assisted capillary electrophoresis (FACE) study indicated that structural characteristics of Ls were associated with X-ray diffraction patterns. Double helices originated from linear chains with an approximate average degree of polymerisation (DP) 14, 16, and 15 would span the entire length of crystalline lamellae of A-, B-, and C-type starches, respectively. The proportion of singly branched materials (SB) with DP 25 protected in Ls was higher for A-type Ls (10-17%) than for B-type Ls (4-6%) and C-type Ls (8%). The structures of SB were similar in which branched chain (DP 13-15) was longer than main chain (DP 10-12). The structural characteristics of Ls are discussed in relation to acid and enzymatic degradations of starch granules.     

Amylopectin molecular structure reflected in macromolecular organization of granular starch

For lintners with negligible amylose retrogradation, crystallinity related inversely to starch amylose content and, irrespective of starch source, incomplete removal of amorphous material was shown. The latter was more pronounced for B-type than for A-type starches. The two predominant lintner populations, with modal degrees of polymerization (DP) of 13-15 and 23-27, were best resolved for amylose-deficient and A-type starches. Results indicate a more specific hydrolysis of amorphous lamellae in such starches. Small-angle X-ray scattering showed a more intense 9-nm scattering peak for native amylose-deficient A-type starches than for their regular or B-type analogues. The experimental evidence indicates a lower contrasting density within the "crystalline" shells of the latter starches. A higher density in the amorphous lamellae, envisaged by the lamellar helical model, explains the relative acid resistance of linear amylopectin chains with DP > 20, observed in lintners of B-type starches. Because amylopectin chain length distributions were similar for regular and amylose-deficient starches of the same crystal type, we deduce that the more dense (and ordered) packing of double helices into lamellar structures in amylose-deficient starches is due to a different amylopectin branching pattern.     

Susceptibility of annealed starches to hydrolysis by α-amylase and glucoamylase

The objective of this work was to determine if annealing altered the susceptibility of different starches to enzyme hydrolysis. Five commercial starches, including waxy corn, common corn, Hylon V, Hylon VII, and potato, were annealed by a multiple-step process, and their susceptibility to α-amylase and glucoamylase and the physicochemical properties of the hydrolyzed native and annealed starches were determined. During 36 h of enzyme hydrolysis, significant differences were noted between annealed starch and its native counterpart in the extent of α-amylolysis for Hylon V, Hylon VII, and potato, and in the extent of glucoamylolysis for potato. Waxy and common corn starches were hydrolyzed to a greater degree by both enzymes when compared with the other starches. The apparent amylose content of both native and annealed starches decreased during α-amylolysis for all starches, but increased for Hylon V, VII, and potato starches during glucoamylolysis. Most native and annealed starches exhibited comparable or increased peak gelatinization temperatures and comparable or decreased gelatinization enthalpy on hydrolysis with the exception of annealed potato starch, which showed a significant decrease in peak gelatinization temperature on hydrolysis. Annealed starches displayed significant higher peak gelatinization temperatures than their native counterparts. The intensity of main X-ray diffraction peaks of all starches decreased upon hydrolysis, and the changes were more evident for glucoamylase-hydrolyzed starches. The annealing process allowed for a greater accessibility of both enzymes to the amorphous as well as the crystalline regions to effect significant changes in gelatinization properties during enzyme hydrolysis.     

Annealing of normal and mutant wheat starches. LM, SEM, DSC, and SAXS studies

Structure and thermodynamic properties of native and annealed wheat starches with different amylose content (from 1.5% to 39.5%) have been studied by high-sensitivity differential scanning microcalorimetry (HSDSC), small-angle X-ray diffraction (SAXS), light (LM), and scanning electron microscopy (SEM). Starch morphology, the values of the melting cooperative unit, the thickness of crystalline lamellae and the size of amylopectin clusters as well as thermodynamic parameters characterizing surface of the face side in starch crystals were determined. Some suppositions based on different physical approaches are used for a discussion of the results concerning structural reorganization of starches on different levels of macromolecular organization.     

Preparation and characterization of new and improved soluble-starches, -amylose, and -amylopectin by reaction with benzaldehyde/zinc chloride

Seven different starches from potato, rice, maize, waxymaize, amylomaize-VII, shoti, and tapioca, and potato amylose and potato amylopectin have been reacted with benzaldehyde, catalyzed by ZnCl₂, to give new water-soluble starches and water soluble-amylose and soluble-amylopectin. In contrast to the native starches, aqueous solutions of the modified starches could not be precipitated with 2-, 3-, or 4-volumes of ethanol. β-Amylase gave no reaction with the modified starches, in contrast to the native starches, indicating that the modification occurred exclusively at the nonreducing-ends, giving 4,6-benzylidene-d-glucopyranose at the nonreducing-ends. Reactions of α-amylase with native and modified potato and rice starches gave a decrease in the triiodide blue color and an increase in the reducing-value that were similar for the native- and modified-starches, indicating the modified starches had not been significantly altered by the modification. The benzaldehyde-modified starches and benzaldehyde-modified potato amylose and potato amylopectin components, therefore, have a starch structure very much like their native counterparts, in contrast to the Lintner, Small, and the alcohol/acid-hydrolyzed soluble-starches that have undergone acid hydrolysis. The benzaldehyde-modified starches and starch components have significantly higher water solubility than their native counterparts even though the structures of the modified starches had only been slightly altered from the structures of their native counterparts. They all gave crystal-clear solutions that did not retrograde.     

Acid hydrolysis of native and annealed starches and branch-structure of their Naegeli dextrins

Eight commercial starches, including common corn, waxy corn, wheat, tapioca, potato, Hylon V, Hylon VII, and mung bean starch, were annealed by a multiple-step process, and their gelatinization characteristics were determined. Annealed starches had higher gelatinization temperatures, reduced gelatinization ranges, and increased gelatinization enthalpies than their native starches. The annealed starches with the highest gelatinization enthalpies were subjected to acid hydrolysis with 15.3% H2SO4, and Naegeli dextrins were prepared after 10 days' hydrolysis. Annealing increased the acid susceptibility of native starches in the first (rapid) and the second (slow) phases with potato starch showing the greatest and high amylose starches showing the least changes. Starches with a larger shift in onset gelatinization temperature also displayed a greater percent hydrolysis. The increase in susceptibility to acid hydrolysis was proposed to result from defective and porous structures that resulted after annealing. Although annealing perfected the crystalline structure, it also produced void space, which led to porous structures and possible starch granule defects. The molecular size distribution and chain length distribution of Naegeli dextrins of annealed and native starches were analyzed. The reorganization of the starch molecule during annealing occurred mainly within the crystalline lamellae. Imperfect double helices in the crystalline lamellae improved after annealing, and the branch linkages at the imperfect double helices became protected by the improved crystalline structure. Therefore, more long chains were observed in the Naegeli dextrins of annealed starches than in native starches.     

Preparation and characterization of gelatinized granular starches from aqueous ethanol treatments

In order to modify the properties of native starch granules, the formation of gelatinized granular forms (GGS) from normal, waxy, and high amylose maize, as well as potato and tapioca starches was investigated by treating granules with aqueous ethanol at varying starch:water:ethanol ratios and then heating in a rotary evaporator to remove ethanol. The modified starches were characterized using bright field, polarized and electron microscopy. Short/long range molecular order and enthalpic transitions on heating were also studied using infrared spectroscopy, X-ray diffractometry and differential scanning calorimetry respectively. A diffuse birefringence pattern without Maltese cross was observed for most GGS samples. Treatment with aqueous ethanol resulted in starch-specific changes in the surface of granules, most noticeably swelling and disintegration in waxy maize, surface wrinkling in normal maize and tapioca, swelling and opening-up in potato starches, and swelling and bursting in high amylose maize. The ratio of ethanol to water at which original granular order was disrupted also varied with starch type. GGS had less short range molecular order than native granules as inferred by comparing 1047/1022 wave number ratio from infrared spectroscopy. Similarly, A- and B-type diffraction reflections were either reduced or completely lost with evolution of V-type patterns in GGS.     

Influence of growth temperature on the structure and thermodynamic parameters of barley starches

Barley starches grown at different temperatures were investigated using high sensitivity differential scanning microcalorimetry and X-ray diffraction. By applying physico-chemical approaches, thickness of crystalline lamellae, thermodynamic and structural characteristics (such as gelatinisation) of cooperative units and parameters characterising thermodynamic properties of crystal surfaces were determined. It was established that a difference of growth temperature experienced by plants during development does not lead to changes in the thickness of amylopectin crystalline lamellae and hence constituent double helix length. The role of defects in structural organisation of native barley starches is discussed. It is suggested that not all fatty acids necessarily form crystalline inclusion complexes.     

Structural basis for the slow digestion property of native cereal starches

Native cereal starches are ideal slowly digestible starches (SDS), and the structural basis for their slow digestion property was investigated. The shape, size, surface pores and channels, and degree of crystallinity of starch granules were not related to the proportion of SDS, while semicrystalline structure was critical to the slow digestion property as evidenced by loss of SDS after cooking. The high proportion of SDS in cereal starches, as compared to potato starch, was related to their A-type crystalline structure with a lower degree of perfection as indicated by a higher amount of shortest A chains with a degree of polymerization (DP) of 5-10. The A-type amorphous lamellae, an important component of crystalline regions of native cereal starches, also affect the amount of SDS as shown by a reduction of SDS in lintnerized maize starches. These observations demonstrate that the supramolecular A-type crystalline structure, including the distribution and perfection of crystalline regions (both crystalline and amorphous lamellae), determines the slow digestion property of native cereal starches.     

Structural and thermodynamic properties of rice starches with different genetic background Part 2. Defectiveness of different supramolecular structures in starch granules

High-sensitivity differential scanning microcalorimetry (HSDSC), small-angle X-ray scattering (SAXS), light (LM) and scanning electronic (SEM) microscopy techniques were used to study the defectiveness of different supramolecular structures in starches extracted from 11 Thai cultivars of rice differing in level of amylose and amylopectin defects in starch crystalline lamellae. Despite differences in chain-length distribution of amylopectin macromolecules and amylose level in starches, the invariance in the sizes of crystalline lamellae, amylopectin clusters and granules was established. The combined analysis of DSC, SAXS, LM and SEM data for native starches, as well as the comparison of the thermodynamic data for native and annealed starches, allowed to determine the structure of defects and the localization of amylose chains in crystalline and amorphous lamellae, defectiveness of lamellae, clusters and granules. It was shown that amylose “tie chains”, amylose–lipid complexes located in crystalline lamellae, defective ends of double helical chains dangling from crystallites inside amorphous lamellae (“dangling” chains), as well as amylopectin chains with DP 6–12 and 25–36 could be considered as defects. Their accumulation can lead to a formation of remnant granules. The changes observed in the structure of amylopectin chains and amylose content in starches are reflected in the interconnected alterations of structural organization on the lamellar, cluster and granule levels.     

Effect of amylose content on physical and mechanical properties of potato-starch-based edible films

The present study investigated the amylose content and the gelatinization properties of various potato starches extracted from different potato cultivars. These potato starches were used to prepare edible films. Physical and mechanical properties of the films were investigated. The crystallinity of selected native starches and edible films made of the same starches were determined by X-ray diffraction. The amylose content of potato starches varied between 11.9 and 20.1%. Gelatinization of potato starches in excess water occurred at temperatures ranging from 58 to 69 degrees C independently of the amylose content. The relative crystallinity was found to be around 10-13% in selected native potato starches with low, medium, and high amylose content. Instead, films prepared from the same potato starches were found to be practically amorphous having the relative crystallinity of 0-4%. The mechanical properties and the water vapor permeability of the films were found to be independent of the amylose content.     

Determination of the polymorphic composition of smooth pea starch

A method for estimating the proportions of ‘A’ and ‘B’ polymorphs comprising a sample of ‘C’ type starch is proposed which uses established experimental techniques with commercially available spreadsheet and X-ray analysis software. Waxy maize, potato and smooth pea starches were used to provide X-ray diffraction patterns characteristic of the ‘A’, ‘B’ and ‘C’ starch polymorphs. Samples of amorphous starches were also prepared. The method initially involved subtraction of the amorphous phase and instrumental background from the X-ray diffraction patterns of each starch sample using the spreadsheet program, Lotus 1-2-3. The remainder of the pattern, representing the crystalline portion of the starch sample, was then analysed by profile fitting to elucidate the positions and areas of individual diffraction peaks. The ratio of the total peak area to the areas under peaks characteristic of ‘A’ and ‘B’ type starches, respectively, were used to calculate the relative proportions of these polymorphs in smooth pea starch. These proportions were found to be 56±3% ‘A’ polymorph to 44±3% ‘B’ polymorph. A ‘C’ type pattern was constructed by using Lotus 1-2-3 to combine diffraction patterns from the crystalline portions of ‘A’ and ‘B’ type starches in the proportions given above. Polymorph patterns were obtained by manipulation of the diffraction patterns from the crystalline portions of starches using Lotus 1-2-3. An ‘A’ type pattern was obtained by subtraction of a ‘B’ type pattern from that of a ‘C’ type. Similarly, a ‘B’ type pattern was obtained by subtraction of an ‘A’ type pattern from that of a ‘C’ type.     

Extruding foams from corn starch acetate and native corn starch

Because of the hydrophilic characteristics of native starch foams and the cost of modifying starch, the uses of starch and modified starch foams are hindered. To decrease hydrophilicity and cost of starch foams, native corn starch was blended with starch acetate and extruded. A twin-screw mixing extruder was used to produce the foams. Native starch content, screw speed, and barrel temperature had significant effects on molecular degradation of starches during extrusion. The melting temperature of extruded starch acetate/native starch foam was higher (216 degrees C) than that for starch acetate (193.4 degrees C). Strong peaks in the X-ray diffractograms of extruded starch acetate/native starch foam suggested new crystalline regions were formed. Optimum conditions for high radial expansion ratio, high compressibility, low specific mechanical energy requirement, and low water absorption index were 46.0% native starch content, 163 rpm screw speed, and 148 degrees C barrel temperature.     

Variation in crystalline type with amylose content in maize starch granules: an X-ray powder diffraction study

Comparative studies of native maize starches with different amylose contents were carried out using X-ray powder diffraction. The results show a transition of crystalline type from A through C to B, accompanying a decrease in degree of crystallinity from 41.8% to 17.2% across a range of apparent amylose content from 0% to 84%. Hydration induces an increase in degree of granule crystallinity, but does not change the transition of crystal type. Progressively from A-type to C-type, crystallinity decreases rapidly with an increase in amylose content. From C-type to B-type, overall crystallinity decreases more slowly. The crystal type is strongly dependent on amylose content and on average chain length of the respective amylopectin. Waxy A-types have an average chain length of about 20, while in high amylose B-types this rises to ≈35. The proportion of short chains (10–13 glucose units) appears to affect crystal type significantly. Some V-type material was detected at high amylose levels. The proportion of this increased after prolonged exposure of the granules to iodine vapour. Implications for the arrangement of starch components in the granule are discussed.     

Effect of microwave radiation on physico-chemical properties and structure of potato and tapioca starches

The time-temperature profiles of selected starch-water systems subjected to microwave processing were established and the effect of microwave radiation on the physico-chemical properties and structure of potato and tapioca starches was studied. The experimental starch samples were examined by the Brabender rheological method, light microscopy, scanning electron microscopy and X-ray diffractometry. Microwave radiation was evidenced to affect the temperature and moisture contents of the experimental starches, with a strong correlation between the moisture content and the rate of temperature rise. An isothermal transformation was revealed with the samples of moisture contents over 20%, causing a rise in the gelatinisation temperature of the starch and a drop in its solubility in water. The most pronounced change was observed in the case of potato starch: its crystal structure changed from type B to type A. The tapioca starch underwent similar but less marked changes.     

Effect of heat–moisture treatment on the structure and physicochemical properties of tuber and root starches

Starch from tubers potato (Solanum tuberosum), taro (Alocassia indica), new cocoyam (Xanthosoma sagitifolium), true yam (Dioscorea alata), and root cassava, (Manihot esculenta) crops was isolated and its morphology, composition and physicochemical properties were investigated before and after heat–moisture treatment (HMT) (100 °C, for 10 h at a moisture content of 30%). Native starch granules were round to oval to polygonal with smooth surfaces. The granule size (diameter) ranged from 3.0 to 110 μm.The total amylose content ranged from 22.4 to 29.3%, of which 10.1–15.5% was complexed by native lipid. The phosphorus content ranged from 0.01 to 0.1%. The X-ray pattern of potato and true yam was of the ‘B’-type. Whereas, that of new cocoyam and taro was of the ‘A’-type. Cassava exhibited a mixed ‘A+B’-type X-ray pattern. The relative crystallinity, swelling factor (SF), amylose leaching (AML), gelatinization temperature range and the enthalpy of gelatinization of the native starches ranged from 30 to 46, 22 to 54, 5 to 23%, 13 to 19 °C and 12 to 18 J/g, respectively. Susceptibility of native starches towards hydrolysis by 2.2N HCl and porcine pancreatic -amylase were 60–86% (after 12 days), and 4–62% (after 72 h), respectively. Retrogradation was most pronounced in the B-type starches. Granule morphology remained unchanged after HMT. The X-ray pattern of the B-type starches was altered (B→A+B) on HMT. However, that of the other starches remained unchanged. HMT decreased SF, AML, gelatinization enthalpy and susceptibility towards acid hydrolysis, but increased gelatinization temperatures and enzyme susceptibility. Extent of retrogradation and relative crystallinity decreased on HMT of true yam and potato starches, but remained unchanged in the other starches. The foregoing data showed that changes in physicochemical properties on HMT are influenced by the interplay of crystallite disruption, starch chain associations and disruption of double helices in the amorphous regions.     

Structural and thermodynamic properties of starches extracted from GBSS and GWD suppressed potato lines

A combined DSC–SAXS approach was employed to study the effects of amylose and phosphate esters on the assembly structures of amylopectin in B-type polymorphic potato tuber starches. Amylose and phosphate levels in the starches were specifically engineered by antisense suppression of the granule bound starch synthase (GBSS) and the glucan water dikinase (GWD), respectively. Joint analysis of the SAXS and DSC data for the engineered starches revealed that the sizes of amylopectin clusters, thickness of crystalline lamellae and the polymorphous structure type remained unchanged. However, differences were found in the structural organization of amylopectin clusters reflected in localization of amylose within these supramolecular structures. Additionally, data for annealed starches shows that investigated potato starches possess different types of amylopectin defects. The relationship between structure of investigated potato starches and their thermodynamic properties was recognized.