Effect of the alkaline cations on the stability of the model polynucleotide poly(dG-dC)·poly(dG-dC)

When the model polynucleotide poly(dG-dC)?poly(dG-dC) [polyGC] is titrated with a strong acid (HCl) in unbuffered aqueous solutions containing the chlorides of the alkali metals in the concentration range 0.010?M-0.600?M, two transitions in the absorbance vs. pH plots are evidenced, characterized by the constants pK(a(?)) and pK(a(?)). The limiting values at infinite saline concentrations of these two constants, namely pK(∞)(a(?)) and pK(∞)(a(?)) obtained making use of the "one site saturation constant" equation or, in turn, of the double logarithmic plot: pK(a) vs. log([salt]?1), exhibit a clear dependence on the nature of the cations. The effects of the different alkali cations on the pK(∞)(a) values follow the Hofmeister series. In fact, the pK(∞)(a(?)) and the pK(∞)(a(?)) values are smaller for Li+ and Na+ than for Rb+ and Cs+, with K+ at the border between the two, showing that the transitions require higher concentrations of protons to occur in the presence of high concentrations of the cosmotropic ions.     

Studies on synthetic chromatins containing poly(dA-dT)·poly(dA-dT) and poly(dG-dC)·poly(dG-dC)

Core histones, (H2A,H2B,H3,H4)₂, were reconstituted with the synthethic polynucleotides poly(dA-dT)·poly(dA-dT) and poly(dG-dC)·poly(dG-dC) to yield synthetic chromatins containing 200 basepairs per octamer. These synthetic chromatins displayed a 36% decrease in the circular dichroism (CD) peak ellipticity from the value of the polynucleotide free in solution; the poly(dA-dT)·poly(dA-dT)/chromatin showed an increase in the complexity of the thermal denaturation profile compared to that of the polynucleotide. Both the temperature of maximum $\text{d}\text{h}\text{d}\text{T}$ for each transition (T_m) and the relative amount of poly(dA-dT)·poly(dA-dT) in the synthetic chromatin melting in each of the four thermal transitions is a function of the ionic strength over the 0–5 mM sodium phosphate range (0.25 mM EDTA, pH 7.0); a shift of material toward higher melting transitions was observed with increasing ionic strength. The CD peak ellipticity value for both synthetic chromatins was ionic strength-independent over the 0–5 mM sodium phosphate range. These results are in contrast to those observed with $\text{H}\text{1}\text{H}\text{5}$ stripped chicken erythrocyte chromatin (Fulmer, A. and Fasman, G.D. (1979) Biopolymers 18, 2875–2891), where an ionic strength dependence was found. Differences in the CD spectra between poly(dA-dT)·poly(dA-dT)/chromatin, poly(dG-dC)·poly(dG-dC)/chromatin and $\text{H}\text{1}\text{H}\text{5}$ stripped chicken erythrocyte chromatin suggest subtle differences in assembly. Finally, the temperature dependence of the CD spectra of poly(dA-dT)·poly(dA-dT)-containing synthetic chromatin, which is similar to that for the polynucleotide, suggests the core histone bound polynucleotide has a large degree of conformational flexibility allowing it to undergo the premelt transition.     

Comparison Between poly(dG-dC)·poly(dG-dC) and DNA Modified by cis-diamminedichloroplatinum (II): Immunological and Spectroscopic Studies

Abstract

The importance of the base composition and of the conformation of nucleic acids in the reaction with the drug cis-diamminedichloroplatinum(II) has been studied by competition experiments between the drug and several double-stranded polydeoxyribonucleotides. Binding to poly(dG)·poly(dC) is larger than to poly (dG-dC)·poly(dG-dC). There is no preferential binding in the competition between poly(dG-dC) ·poly(dG-dC), poly(dA-dC) ·poly(dG-dT) and poly(dA-dG)·poly(dC-dT). In the competition between poly(dG-dC) ·poly (dG-dC) (B conformation) and poly(dG-br⁵dC) ·poly(dG-br⁵dC) (Z conformation), the drug binds equally well to both polynucleotides. In natural DNA, modification of guanine residues in (GC)_n·(GC)_nsequences by the drug has been revealed by the inhibition of cleavage of these sequences by the restriction enzyme BssHII. By means of antibodies to platinated poly(dG-dC), it is shown that some of the adducts formed in platinated poly(dG-dC) are also formed in platinated pBR322 DNA. The type of adducts recognized by the antibodies is not known. Thin layer chromatography of the products after chemical and enzymatic hydrolysis of platinated poly(dG-dC) suggests that interstrand cross-links are formed. Finally, the conformations of poly(dG-m⁵dC) modified either by cis-diamminedichloroplatinum(II) or by trans-diammine- dichloroplatinum(II) have been compared by circular dichroism. Both the cis-isomer and the trans-isomer stabilize the Z conformation when they bind to poly(dG-m⁵dC) in the Z conformation. When they bind to poly(dG-m⁵dC) in the B conformation, the conformations of poly(dG-m⁵dC) modified by the cis or the trans-isomer are different. Moreover, the cis-isomer facilitates the B form-Z form transition of the unplatinated regions while the trans-isomer makes it more difficult.     

Interpretation of DNA vibration modes: I-The guanosine and cytidine residues involved in poly(dG-dC)·poly(dG-dC) and d(CG)3·d(CG)3

Abstract

A normal coordinate analysis has been carried out on guanosine and cytidine residues appearing in oligo and polynucleotides by using a simplified valence force field that allows the vibrational spectra of 5′-dGMP and 2′-deoxycytidine molecules to be reproduced. The role of both C2′-endo and C3′-endo conformations on sugar pucker, as well as that of glycosidic torsion angle (χ), on several characteristic vibration modes of these residues have been studied. The present calculations based on a non-redundant set of internal coordinates preserving the harmonic approximation of the potential field, allows us to explain quite satisfactorily the modifications of the vibrational spectra in the 1550-1250 cm^?1 and 785-500 cm^?1 regions, when the right → left-handed conformational transition occurs.     

Raman Spectroscopy Study of the B-Z Transition in (dG-dC)n · (dG-dC)n and a DNA Restriction Fragment

Abstract

The B to Z conformational transition of (dG-dC)_n·(dG-dC)_n and a 157 bp DNA restriction fragment were followed using Raman spectroscopy. The 157 bp DNA has a 95 bp segment from the E. coli lactose operon sandwiched between 26 and 32 bp of (dC-dG) sequences. Raman spectra of the DNAs were obtained at varying sodium chloride concentrations through the region of the transition. A data analysis procedure was developed to subtract the background curves and quantify Raman vibrational bands. Profiles of relative intensity vs. sodium chloride concentration are shown for bands at 626, 682, 831–833 and 1093 cm^?1. Both (dG-dC)_n·(dG-dC)_n and the 157 bp DNA show changes in the guanine vibration at 682 cm^?1 and backbone band at 831–3 cm^?1 preceeding a highly cooperative change in the 1093 cm^?1 PO 7 vibration. This result indicates that there are at least two conformational steps in the B to Z conformational pathway.

We review the effect of the (dC-dG) portion of the 157 bp DNA on the 95 bp segment. Comparison of Raman spectra of the 157 bp DNA, the 95 bp fragment and (dG-dC)_n·(dG- dC)_n indicate that in 4.5 M NaC/the (dC-dG) segments are in a Z-conformation. Base stacking in the 95 bp portion of the 157 bp DNA appears to maintain a B-type conformation. However, a substantial portion of this region no longer has a B-type backbone vibration.     

Structures for the polynucleotide complexes poly(dA) · poly(dT) and poly(dT) · poly(dA) · poly(dT)

X-ray diffraction analyses of fibers of polydeoxyadenylic acid · polydeoxythymidylic acid show that this molecule exists as a 10-fold double-helix with axial rise per nucleotide $\text{h = 3.24}\text{to}\text{3.29}\text{A}\text{?}$. The structure is very similar to B-DNA ($\text{h = 3.37}\text{A}\text{?}$) in having C3-exo furanose rings and base-pairs positioned centrally on the helix axis, but distinctive enough to have two packing modes, neither of which has been observed for B-DNA. Although the triple-stranded poly(dT) · poly(dA) · poly(dT) also has a large value of h(3.26 Å), each of the chains is a 12-fold helix of the A-genus with C3-endo furanose rings and bases displaced several Angstrom units from the helix axis.     

Interaction of 9-O-(ω-amino) alkyl ether berberine analogs with poly(dT)·poly(dA)*poly(dT) triplex and poly(dA)·poly(dT) duplex: a comparative study

Isoquinoline alkaloids and their analogs represent an important class of molecules for their broad range of clinical and pharmacological utility. These compounds are of current interest owing to their low toxicity and excellent chemo preventive properties. These alkaloids can play important role in stabilising the nucleic acid triple helices. The present study has focused on the interaction of five 9-O-(ω-amino) alkyl ether berberine analogs with the DNA triplex poly(dT)·poly(dA)*poly(dT) and the parent duplex poly(dA)·poly(dT) studied using various biophysical techniques. Scatchard analysis of the spectral data indicated that the analogs bind both to the duplex and triplex in a non-cooperative manner in contrast to the cooperative binding of berberine to the DNA triplex. Strong intercalative binding to the DNA triplex structure was revealed from ferrocyanide quenching, fluorescence polarization and viscosity results. Thermal melting studies demonstrated higher stabilization of the Hoogsteen base paired third strand of the DNA triplex compared to the Watson–Crick strand. Circular dichroism studies suggested a stronger perturbation of the DNA triplex conformation by the alkaloid analogs compared to the duplex. The binding was entropy-driven in each case and the entropy contribution to free energy increased as the length of the alkyl side chain increased. The analogs exhibited stronger binding affinity to the triple helical structure compared to the parent double helical structure.     

The regulatory effect of citric acid on the co-production of poly(ε-lysine) and poly(l-diaminopropionic acid) in Streptomyces albulus PD-1

Streptomyces albulus PD-1 can co-produce antimicrobial homo-polymers poly(ε-lysine) (ε-PL) and poly(l-diaminopropionic acid) (PDAP). In this study, a novel feeding strategy of citric acid coupled with glucose-(NH₄)₂SO₄ feeding was employed to S. albulus PD-1. When the pH of the culture broth dropped to 4.0, the feeding solution was added continuously to maintain the concentrations of glucose and citric acid at 10 and 4 g L^?1, respectively. As a result, the final concentration of ε-PL increased from 21.7 to 29.7 g L^?1 and the final concentration of PDAP decreased from 4.8 to 3.2 g L^?1. Assays on intracellular nucleotide levels and key enzyme activities were performed to elucidate the underlying regulation mechanism. The addition of citric acid increased NADH/NAD⁺ ratio and decreased intracellular ATP level; meanwhile, the activities of pyruvate kinase, citrate synthase and isocitrate dehydrogenase decreased while aspartate aminotransferase activity increased. Therefore, we deduced that citric acid feeding resulted in metabolic flux redistribution at the node of phosphoenolpyruvate; the metabolic pathway from phosphoenolpyruvate directed into tricarboxylic acid cycle was weakened and thus PDAP production was inhibited. On the other hand, the metabolic pathway from phosphoenolpyruvate directed into oxaloacetate and l-aspartate was enhanced, thereby improving ε-PL production. This fermentation strategy may be potentially useful in ε-PL production because it can effectively inhibit the formation of by-products, such as PDAP.     

Aliphatic substituents in place of thymine methyl promote zig-zag character of the poly(dA-dT)·poly(dA-dT) backbone

This work compared circular dichroism and phosphorus n.m.r. of poly(dA-dU)·poly(dA-dU), poly(dA-dT)·poly(dA-dT), poly(dA-ethyl⁵dU)·poly(dA-ethyl⁵dU), and poly(dA-butyl⁵dU)·poly(dA-butyl⁵dU) at low-salt and in concentrated caesium chloride and caesium fluoride solutions. It is demonstrated that growing bulk of the substituent increases the conformationl anomaly residing in the purine(3′–5′)pyrimidine steps while the backbone is less affected in the pyrimidine (3′–5′)purine steps. As the length of the substituent increases, conformation of the polynucleotides alters more dramatically at increasing concentrations of caesium cations. At high CsF concentrations, all the polynucleotides adopt a novel conformer which we call X-DNA and its formation is promoted by larger substituents. The X-DNA conformation of poly(dA-butyl⁵dU)·poly(dA-butyl⁵dU) gives two phosphorus n.m.r. resonances separated as much as in the case of the left-handed zig-zag Z-DNA double helix of poly(dG-dC)·poly(dG-dC) but X-DNA and Z-DNA differ qualitatively by an opposite dinucleotide repeat. Phosphorus n.m.r. spectra of poly(dA-dT)·poly(dA-dT) and poly(dA-butyl⁵dU)-poly(dA-butyl⁵dU) differ quantitatively at high CsF concentrations, which may reflect conformational variability of the X-DNA backbone. Poly(dA-butyl⁵dU)·poly(dA-butyl⁵dU), but not poly(dA-ethyl⁵dU)·poly(dA-ethyl⁵dU) and the related polynucleotides with shorter substituents in position 5 of uracil, exhibits one more reversible transition at very high caesium fluoride concentrations. It is accompanied by polynucleotide associations and has a slow kinetics. This transition may involve one more radical change in the double helix architecture from X-DNA into another conformation.     

The nature of different influence of Cd<Superscript>2+</Superscript> ions on the conformational equilibrium of triple-stranded polyribonucleotides poly(U)•poly(A)•poly(U) and poly(I)•poly(A)•poly(I) in aqueous solutions

The influence of Cd²⁺ ions on the conformational equilibrium of single-stranded (poly(U), poly(A), poly(I)) and triple-stranded polyribonucleotides (A2I, A2U) in aqueous solutions (0.1 M Na⁺ pH 7) has been investigated using difference UV spectroscopy and thermal denaturation. Analysis of the shape and intensity of the DUV spectra of poly(A), poly(I), and A2I has revealed the presence of two types of complex formed as a result of (i) interaction between Cd²⁺ and the N7 atoms of purines, producing macrochelates; and (ii) binding of Cd²⁺ to the N1 atoms of poly(A) and poly(I). Since Cd²⁺ ions are not bound to heteroatoms of the bases in A2U, the conformation of the structure remains stable up to 0.02 M Cd²⁺. There is a critical Cd²⁺ concentration (～1.5?10^?4 M) above which A2I assumes a new helical conformation with lower thermal stability. It is supposed that, upon the formation of the “metallized” A2I triplex, the Cd²⁺ ions are located inside the triple helix and form bridges between the hypoxanthine and adenine of the homopolynucleotide strands.     

Binding properties of Ru(II) polypyridyl complexes with poly(U)·poly(A)*poly(U) triplex: the ancillary ligand effect on third-strand stabilization

The binding properties of [RuL₂(mip)]²⁺ {where L is 1,10-phenanthroline (phen) or 4,7-dimethyl-1,10-phenanthrollne (4,7-dmp) and mip is 2′-(3″,4″-methylenedioxyphenyl)imidazo[4′,5′-f][1,10]phenanthroline} with regard to the triplex RNA poly(U)·poly(A)*poly(U) were investigated using various biophysical techniques and quantum chemistry calculations. In comparison with [Ru(4,7-dmp)₂(mip)]²⁺, remarkably higher binding affinity of [Ru(phen)₂(mip)]²⁺ for the triplex RNA poly(U)·poly(A)*poly(U) was achieved by changing the ancillary ligands. The stabilization of the Hoogsteen-base-paired third strand was improved by about 10.9 °C by [Ru(phen)₂(mip)]²⁺ against 6.6 °C by [Ru(4,7-dmp)₂(mip)]²⁺. To the best of our knowledge, [Ru(phen)₂(mip)]²⁺ is the first metal complex able to raise the third-strand stabilization of poly(U)·poly(A)*poly(U) from 37.5 to 48.4 °C. The results reveal that the ancillary ligands have an important effect on third-strand stabilization of the triplex RNA poly(U)·poly(A)*poly(U) when metal complexes contain the same intercalative ligands.     

Interaction between double stranded poly(dA-dT)·poly (dA-dT) and lucanthone

270 MHz ¹H NMR and theoretical studies indicate that the drug lucanthone forms intercalated complexes with the synthetic DNA poly(dA-dT)·poly(dA-dT). In the intercalated complex the long axis of the drug is perpendicular to the helix axis and parallel to the base pair axis, i.e., the long axis is perpendicular to the dyad axis.     

Interaction of poly(ADP-ribose)polymerase with DNA polymerase α

Homogeneously purified poly(ADP-ribose) polymerase (PARP) specifically stimulated the activity of immunoaffinity-purified calf or human DNA polymerase by about 6 to 60-fold. Apparently, poly(ADP-ribosyl)ation of DNA polymerase was not necessary for the stimulation. The effects of PARP on DNA polymerase were biphasic: at very low concentrations of DNA, it rather inhibited its activity, whereas, at higher DNA concentrations, PARP greatly stimulated it. The autopoly(ADP-ribosyl)ation of PARP suppressed both its stimulatory and inhibitory effects. By immunoprecipitation with an anti-DNA polymerase antibody, it was clearly shown that PARP may be physically associated with DNA polymerase . Stimulation of DNA polymerase may be attributed to the physical association between the two, rather than to the DNA-binding capacity of PARP, since the PARP fragment containing only the DNA binding domain showed little stimulatory activity. The existence of PARP-DNA polymerase complexes were also detected in crude extracts of calf thymus.     

Biodegradation of poly(ε-caprolactone) (PCL) by a new Penicillium oxalicum strain DSYD05-1

In this study, fungi isolated from soil were screened for their ability to form clear zones on agar plates with emulsified poly(ε-caprolactone) (PCL). The most active strain, designated as DSYD05, was identified as Penicillium oxalicum on the basis of morphological characteristics and phylogenetic analysis. Mutant DSYD05-1, obtained by ultraviolet-light mutagenesis from strain DSYD05, was more effective in PCL degradation. In liquid cultures of the mutant strain with PCL emulsion, DSYD05-1 showed the highest PCL-degrading activity after 4?days of cultivation. The products of PCL degradation were analysed by mass spectrometry; the results indicated that 6-hydroxyhexanoic acid was produced and assimilated during cultivation. The degradation of PCL film by DSYD05-1 was observed by scanning electron microscopy, and was indicative of a three-stage degradation process. The degradation of amorphous parts of the film preceded that of the crystalline center and then the peripheral crystalline regions. In addition, DSYD05-1 showed a wide range of substrate specificity, with capability to degrade PCL, poly(β-hydroxybutyrate), and poly(butylene succinate), but not poly(lactic acid), indicating that the strain could have potential for application in the treatment or recycling of bio-plastic wastes.     

Bioreducible block copolymers based on poly(ethylene glycol) and poly(γ-benzyl L-glutamate) for intracellular delivery of camptothecin

Poly(ethylene glycol)-b-poly(γ-benzyl L-glutamate)s bearing the disulfide bond (PEG-SS-PBLGs), which is specifically cleavable in intracellular compartments, were prepared via a facile synthetic route as a potential carrier of camptothecin (CPT). Diblock copolymers with different lengths of PBLG were synthesized by ring-opening polymerization of benzyl glutamate N-carboxy anhydride in the presence of a PEG macroinitiator (PEG-SS-NH(2)). Owing to their amphiphilic nature, the copolymers formed spherical micelles in an aqueous condition, and their particle sizes (20-125 nm in diameter) were dependent on the block length of PBLG. Critical micelle concentrations of the copolymers were in the range 0.005-0.065 mg/mL, which decreased as the block length of PBLG increased. CPT, chosen as a model anticancer drug, was effectively encapsulated up to 12 wt % into the hydrophobic core of the micelles by the solvent casting method. It was demonstrated by the in vitro optical imaging technique that the fluorescence signal of doxorubicin, quenched in the PEG-SS-PBLG micelles, was highly recovered in the presence of glutathione (GSH), a tripeptide reducing disulfide bonds in the cytoplasm. The micelles released CPT completely within 20 h under 10 mM GSH, whereas only 40% of CPT was released from the micelles in the absence of GSH. From the in vitro cytotoxicity test, it was found that CPT-loaded PEG-SS-PBLG micelles showed higher toxicity to SCC7 cancer cells than CPT-loaded PEG-b-PBLG micelles without the disulfide bond. Microscopic observation demonstrated that the disulfide-containing micelle could effectively deliver the drug into nuclei of SCC7 cells. These results suggest that PEG-SS-PBLG diblock copolymer is a promising carrier for intracellular delivery of CPT.     

Synthesis of poly(lactide-co-glycolide-co-ε-caprolactone)-graft-mannosylated poly(ethylene oxide) copolymers by combination of "clip" and "click" chemistries

Poly(lactide-co-glycolide) (PLGA) is extensively used in pharmaceutical applications, for example, in targeted drug delivery, because of biocompatibility and degradation rate, which is easily tuned by the copolymer composition. Nevertheless, synthesis of sugar-labeled amphiphilic copolymers with a PLGA backbone is quite a challenge because of high sensitivity to hydrolytic degradation. This Article reports on the synthesis of a new amphiphilic copolymer of PLGA grafted by mannosylated poly(ethylene oxide) (PEO). A novel building block, that is, α-methoxy-ω-alkyne PEO-clip-N-hydroxysuccinimide (NHS) ester, was prepared on purpose by photoreaction of a diazirine containing molecular clip. This PEO block was mannosylated by reaction of the NHS ester groups with an aminated sugar, that is, 2-aminoethyl-α-d-mannopyroside. Then, the alkyne ω-end-group of PEO was involved in a copper alkyne- azide coupling (CuAAC) with the pendent azides of the aliphatic copolyester. The targeted mannose-labeled poly(lactide-co-glycolide-co-ε-caprolactone)-graft-poly(ethylene oxide) copolymer was accordingly formed. Copolymerization of d,l-lactide and glycolide with α-chloro-ε-caprolactone, followed by substitution of chlorides by azides provided the azido-functional PLGA backbone. Finally, micelles of the amphiphilic mannosylated graft copolymer were prepared in water, and their interaction with Concanavalin A (ConA), a glyco-receptor protein, was studied by quartz crystal microbalance. This study concluded to the prospect of using this novel bioconjugate in targeted drug delivery.     

一种制备poly(Ⅰ)·poly(C)-滤纸的新方法

poly(1)·poly(C)-滤纸是一种亲和材料,可以用来吸附与双链核酸有亲和力的酶或蛋白。本文介绍用对-β硫酸酯乙砜基苯胺为活化剂制备poly(I)·poly(C)-滤纸的方法。poly(I)·poly(C)的结合容量为10—35μg/cm~2,用来吸附兔网织红细胞裂解液中2’-5’A合成酶效果良好。在一定范围内,酶活与被吸附裂解液量呈线性关系,说明可以用来定量检测未知样品中与poly(I)·poly(C)有亲和力的酶。poly(I)·poly(C)-滤纸在-20℃保存四个月亲和能力不变。本方法与文献报道的方法相比,操作简便试剂易得。     

Improved production of poly(3-hydroxybutyrate-co-4-hydroxbutyrate) copolymer using a combination of 1,4-butanediol and γ-butyrolactone

A locally isolated Gram-negative bacterium, Cupriavidus sp. USMAA2-4 was able to synthesize poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] when fed with the precursor carbon 1,4-butanediol using a two-stage cultivation process. When 1% (w/v) of 1,4-butanediol was used, 31 wt.% of P(3HB-co-4HB) copolymer with 41 mol.% of 4HB molar fraction was produced. Both the PHA content and 4HB composition of the copolymer increased as the concentration of 1,4-butanediol increased but the cell biomass did not show any significant changes. However, the 4HB fraction could be further increased using a combination of γ-butyrolactone and 1,4-butanediol. As high as 84 mol.% of 4HB composition was achieved with a combination of 0.35% (w/v) 1,4-butanediol and 1.4% (w/v) γ-butyrolactone. Nevertheless, it was found that Cupriavidus sp. USMAA2-4 cells were inhibited by high concentration of γ-butyrolactone. P(3HB-co-4HB) copolymer was also successfully synthesized using a simplified aerated tank.