Inhibition of PCR amplification by phytic acid, and treatment of bovine fecal specimens with phytase to reduce inhibition

Development of effective polymerase chain reaction (PCR)-based diagnostic tests using ruminant fecal specimens has been thwarted by excessive inhibition. A PCR system based on amplification of 1000 copies of bacteriophage lambda-DNA was used as a model to evaluate inhibition levels in bovine feces. Dilution experiments using a bovine fecal specimen suggested that as little as 40 microg of feces (in a 100-microl PCR) affected the efficiency of amplification. It was discovered that phytic acid (the hexaphosphoric ester of inositol) is a powerful inhibitor of PCR. Above 0.3 mM phytate, the PCR is completely inhibited. In a very narrow range around 0.2 mM target-specific amplification proceeds efficiently. At concentrations between 10 and 100 microM, phytate nonspecific amplification (e.g., primer-dimer formation) is dominant. Below 10 microM, phytate target-specific amplification proceeds efficiently. A simple processing procedure using 50 units/ml of Aspergillus niger 3-phytase [E.C. 3.1.3.8] was developed that reduced PCR inhibition levels in bovine fecal specimens by approximately 500-fold.     

applications of electroporation of adherent cellsIn Situ,on a partly conductive slide

One of the most important factors affecting the quality of PCR is the choice of primers. In general, the longer the PCR product the more difficult it is to select efficient primers and set appropriate designing primers, and in general, the more DNA sequence information is available, the better the ch0ance of finding an optimal primer pair. Efficient primers can be designed by avoiding the following flaws: primer-dimer formation, self-complementarity, too lowT _m of the primers, and/or their incorrect internal stability profile. Tips on subcloning PCR products, calculating duplex stability (predicting dimer formation strength), and designing degenerate primers are given.     

Properties of sequence-tagged-site primer sets influencing repeatability.

The polymerase chain reaction (PCR) has become a standard procedure in plant genetics, and is the basis for many emerging genomics approaches to mapping and gene identification. One advantage of PCR is that sequence information for primer sets can be exchanged between laboratories, obviating the need for exchange and maintenance of biological materials. Repeatability of primer sets, whereby the same products are amplified in different laboratories using the same primer set, is important to successful exchange and utilization. We have developed several hundred sequence-tagged site (STS) primer sets for wheat and barley. The ability of the primer sets to generate reproducible amplifications in other laboratories has been variable. We wished to empirically determine the properties of the primer sets that most influenced repeatability. A total of 96 primer sets were tested with four genomic DNA samples on each of four thermocyclers. All major bands were repeatable across all four thermocylers for approximately 50% of the primer sets. Characteristics most often associated with differences in repeatability included primer GC content and 3'-end stability of the primers. The propensity for primer-dimer formation was not a factor in repeatability. Our results provide empirical direction for the development of repeatable primer sets.     

Combining sequence-specific probes and DNA binding dyes in real-time PCR for specific nucleic acid quantification and melting curve analysis

Currently, in real-time PCR, one often has to choose between using a sequence-specific probe and a nonspecific double-stranded DNA (dsDNA) binding dye for the detection of amplified DNA products. The sequence-specific probe has the advantage that it only detects the targeted product, while the nonspecific dye has the advantage that melting curve analysis can be performed after completed amplification, which reveals what kind of products have been formed. Here we present a new strategy based on combining a sequence-specific probe and a nonspecific dye, BOXTO, in the same reaction, to take the advantage of both chemistries. We show that BOXTO can be used together with both TaqMan probes and locked nucleic acid (LNA) probes without interfering with the PCR. The probe signal reflect formation of target product, while melting curve analysis of the BOXTO signal reveals primer-dimer formation and the presence of any other anomalous products.     

PerlPrimer: cross-platform, graphical primer design for standard, bisulphite and real-time PCR

PerlPrimer is a cross-platform graphical user interface application for the design of primers for standard, bisulphite and real-time PCR, and sequencing. The program incorporates highly accurate melting-temperature and primer-dimer prediction algorithms with powerful tools such as sequence retrieval from Ensembl and the ability to BLAST search primer pairs. It aims to automate and simplify the process of primer design. AVAILABILITY: Open-source and freely available from http://perlprimer.sourceforge.net.     

Micro- and nanoparticles of condensed DNA Formed in PCR with <Emphasis Type="Italic">Taq</Emphasis> polymerase and plasmid DNA as a template

Formation of micro- and nanoparticles of condensed DNA during PCR with microbial genomic DNA or plasmid DNA as templates was reported previously. Initially, the microparticles were formed using a thermostable KlenTaq polymerase, which is a deletion variant of Taq polymerase. The present work shows that Taq polymerase is also capable of efficient formation of micro- and nanoparticles of condensed DNA in PCR. Electron microscopy revealed a number of morphological types (more than four) of microparticles produced in PCR with different reaction buffers in the presence of Taq polymerase and different plasmid DNAs as a template. In the case of some kinds of amplicons, an increase in the number of thermal cycles was shown to result in production of numerous nanowires and electron-dense spherical nanoparticles. The PCR conditions for preferential formation of discs (or ellipsoids) a few micrometers in diameter and several dozens of nanometers in thickness were determined. The structure of microparticles formed in the presence of Taq polymerase was found to depend on the level of synthesis of single-stranded DNA fragments in PCR. Experiments with nuclease S1 revealed that, along with double-stranded DNAs of the amplicon, micro- and nano-particles contained single-stranded DNA fragments, which were absolutely necessary for their formation. In light of these data, the molecular mechanism of micro- and nanoparticle formation in the course of PCR is discussed.     

Initiation of the microgene polymerization reaction with non-repetitive homo-duplexes

Microgene Polymerization Reaction (MPR) is used as an experimental system to artificially simulate evolution of short, non-repetitive homo-duplex DNA into multiply-repetitive products that can code for functional proteins. Blunt-end ligation by DNA polymerase is crucial in expansion of homo-duplexes (HDs) into head-to-tail multiple repeats in MPR. The propagation mechanism is known, but formation of the initial doublet (ID) by juxtaposing two HDs and polymerization through the gap has been ambiguous. Initiation events with pairs of HDs using Real-Time PCR were more frequent at higher HD concentrations and slightly below the melting temperature. A process molecularity of about 3.1, calculated from the amplification efficiency and the difference in PCR cycles at which propagation was detected at varying HD concentrations, led to a simple mechanism for ID formation: the gap between two HDs is bridged by a third. Considering thermodynamic aspects of the presumed intermediate “nucleation complex” can predict relative propensity for the process with other HDs.     

Characterization of family IV UDG from Aeropyrum pernix and its application in hot-start PCR by family B DNA polymerase

Recombinant uracil-DNA glycosylase (UDG) from Aeropyrum pernix (A. pernix) was expressed in E. coli. The biochemical characteristics of A. pernix UDG (ApeUDG) were studied using oligonucleotides carrying a deoxyuracil (dU) base. The optimal temperature range and pH value for dU removal by ApeUDG were 55-65°C and pH 9.0, respectively. The removal of dU was inhibited by the divalent ions of Zn, Cu, Co, Ni, and Mn, as well as a high concentration of NaCl. The opposite base in the complementary strand affected the dU removal by ApeUDG as follows: U/C≈U/G>U/T≈U/AP≈U/->U/U≈U/I>U/A. The phosphorothioate around dU strongly inhibited dU removal by ApeUDG. Based on the above biochemical characteristics and the conservation of amino acid residues, ApeUDG was determined to belong to the IV UDG family. ApeUDG increased the yield of PCR by Pfu DNA polymerase via the removal of dU in amplified DNA. Using the dU-carrying oligonucleotide as an inhibitor and ApeUDG as an activator of Pfu DNA polymerase, the yield of undesired DNA fragments, such as primer-dimer, was significantly decreased, and the yield of the PCR target fragment was increased. This strategy, which aims to amplify the target gene with high specificity and yield, can be applied to all family B DNA polymerases.     

硅对PCR过程的抑制作用研究

探讨不同氧化程度的硅材料对PCR扩增的抑制作用及其机理。将不同氧化程度的硅纳米颗粒加入PCR反应液中,使其与Taq酶、模板等充分接触,通过离心将硅纳米颗粒沉降在管壁上,取出上清或保留硅纳米颗粒上机扩增,扩增产物采用凝胶电泳法检测。结果表明,随着硅材料表面面积与PCR反应液体积之比的增大,核酸扩增效率将明显下降,并且在所研究的范围内,氧化程度高的硅材料对PCR过程抑制作用更强;通过对抑制作用机理进行初步的实验研究,表明硅材料对PCR反应液中的Taq酶的吸附是导致抑制现象产生的主要原因,而对模板的吸附影响较小;并且,反应管内是否保留硅材料对核酸扩增影响较小,硅材料没有明显的直接化学抑制作用。     

New morphotypes of condensed DNA microparticles formed in PCR with <Emphasis Type="Italic">KlenTaq</Emphasis> and <Emphasis Type="Italic">Taq</Emphasis> polymerases and plasmid DNA as a template

The specimens of DNA microparticles formed during PCR amplification of IS-elements ISAfe1 and IST2 by KlenTaq or Taq polymerases and plasmid DNA as a template under varying conditions were investigated by electron microscopy. Microparticle yield and morphology were found to depend on the level of synthesis of single-stranded DNA fragments during PCR. The conditions were studied for formation of discs (ellipsoids) several micrometers in diameter and several dozens of nanometers thick, as well as of microparticles of other morphologies, in the course of PCR with Taq polymerase. The structure of the microparticles produced during an asymmetric PCR, i.e., under conditions of low concentration of one of the two primers, was investigated. Morphology of the DNA micro- and nanoparticles was found to depend mainly on the DNA polymerase used in asymmetric PCR. In particular, in the presence of the KlenTaq polymerase, discs or ellipsoids a few dozen nanometers thick were formed, while in the presence of the Taq polymerase, micro- and nanospheres, heterogeneous in size with rugged surfaces, were produced. The effect of Mn²⁺ cations on DNA microparticle morphology was studied. In the presence of Mn²⁺, microparticle morphology changed dramatically; in PCR mixtures containing KlenTaq polymerase supplemented with Mn²⁺, DNA microspheres with fringed surfaces were formed; in the presence of Taq polymerase, microparticles in the form of short, rounded rods were produced. In light of these data, the molecular mechanism of micro- and nanoparticle formation in the course of PCR is discussed.     

Factors affecting PCR-mediated recombination

In the past decade, polymerase chain reaction (PCR) has become an important tool for the identification of previously unknown microorganisms and the analysis of environmental microbial diversity. Several studies published during recent years, however, have demonstrated that products obtained after PCR using Taq or Vent DNA polymerases will contain hybrid molecules when several homologous target sequences such as multigene families, alleles, or RNA viruses are co-amplified. In this report, we examined the recombination frequency and the extent of template switching during PCR using Taq, Pfu and RTth/Vent DNA polymerases. As a test system we constructed a series of plasmids carrying between one and three frame shift mutations in the gene coding for the protease subtilisin or deletions of approximately 100 bp in the lacZ alpha. Highest recombination frequencies were observed when these mutants were co-amplified with Taq followed by RTth/Vent DNA polymerases. Pfu DNA polymerase displayed no discernable recombination activity under normal PCR conditions. Data also suggest that in vivo repair of heteroduplex DNA molecules in Escherichia coli by a RecA-independent mechanism, perhaps the mismatch repair, results in the formation of chimeric molecules. Using Bacillus subtilis as the host, however, can significantly diminish non-PCR RecA-independent in vivo recombination, owing to the fact that transforming DNA molecules enter B. subtilis as single strands. Combined, these results suggest that using Pfu DNA polymerase for amplification and B. subtilis as the host for transformation may significantly reduce chimera formation.     

Analysis of the 3(')-hydroxyl group in Drosophila siRNA function

Members of the RNA-dependent RNA polymerase (RdRP) gene family have been shown to be essential for dsRNA-mediated gene silencing based on genetic screens in a variety of organisms, including Caenorhabditis elegans, Arabidopsis, Neurospora, and Dictyostelium. A hallmark of this process is the formation of small 21- to 25-bp dsRNAs, termed siRNAs for small interfering RNAs, which are derived from the dsRNA that initiates gene silencing. We have developed methods to demonstrate that these siRNAs produced in Drosophila embryo extract can be uniformly incorporated into dsRNA in a template-specific manner that is subsequently degraded by RNase III-related enzyme activity to create a second generation of siRNAs. SiRNA function in dsRNA synthesis and mRNA degradation depends upon the integrity of the 3'-hydroxyl of the siRNA, consistent with the interpretation that siRNAs serve as primers for RdRP activity in the formation of dsRNA. This process of siRNA incorporation into dsRNA followed by degradation and the formation of new siRNAs has been termed "degradative PCR" and the proposed mechanism is consistent with the genetic and biochemical data derived from studies in C. elegans, Arabidopsis, Drosophila, and Dictyostelium. The methods used to study the function of both natural and synthetic siRNAs in RNA interference in Drosophila embryo extracts are detailed. The importance of the 3'-hydroxyl group for siRNA function and its incorporation into dsRNA is emphasized and the results support a model that places RNA-dependent RNA polymerase as a key mediator in the RNA interference mechanism in Drosophila.     

纳米金对PCR扩增效率影响的机制探讨

近年来,纳米金粒子对聚合酶链式反应（polymerasechainreaction,PCR）的增效作用倍受关注,但是其具体的机制仍未明确提出。研究发现在PCR反应中,纳米粒子的增效作用是存在最佳浓度的,增加DNA聚合酶或者小牛血清蛋白（BSA）可以消除纳米金粒子导致的抑制。我们认为,纳米金粒子可能起到了类似于聚合酶B亚基的作用,提高了DNA聚合酶的延伸能力;而过量纳米金对PCR的抑制作用可能与纳米金结合单链DNA产生的位阻效应有关。     

Reduction of heteroduplex formation in PCR amplification

Heteroduplex formation is known to occur during mixed-template polymerase chain reaction (PCR) using universal primers, and may represent a serious problem in several PCR-based analyses. A common way to eliminate heteroduplex formation is to use reconditioning PCR. Because we detected that reconditioning PCR was not always sufficient to prevent heteroduplex formation, we focused on developing methods for the elimination of heteroduplexes during PCR. We detected that the heteroduplex to homoduplex ratio can be decreased by the addition of Taq polymerase and by a decrease in the number of PCR cycles. An appropriate combination of both of these approaches can be a method generally applicable to decrease the formation of heteroduplexes.     

Emulsion PCR: a high efficient way of PCR amplification of random DNA libraries in aptamer selection

Aptamers are short RNA or DNA oligonucleotides which can bind with different targets. Typically, they are selected from a large number of random DNA sequence libraries. The main strategy to obtain aptamers is systematic evolution of ligands by exponential enrichment (SELEX). Low efficiency is one of the limitations for conventional PCR amplification of random DNA sequence library in aptamer selection because of relative low products and high by-products formation efficiency. Here, we developed emulsion PCR for aptamer selection. With this method, the by-products formation decreased tremendously to an undetectable level, while the products formation increased significantly. Our results indicated that by-products in conventional PCR amplification were from primer-product and product-product hybridization. In emulsion PCR, we can completely avoid the product-product hybridization and avoid the most of primer-product hybridization if the conditions were optimized. In addition, it also showed that the molecule ratio of template to compartment was crucial to by-product formation efficiency in emulsion PCR amplification. Furthermore, the concentration of the Taq DNA polymerase in the emulsion PCR mixture had a significant impact on product formation efficiency. So, the results of our study indicated that emulsion PCR could improve the efficiency of SELEX.     

Experimental analysis of gene assembly with TopDown one-step real-time gene synthesis

Herein we present a simple, cost-effective TopDown (TD) gene synthesis method that eliminates the interference between the polymerase chain reactions (PCR) assembly and amplification in one-step gene synthesis. The method involves two key steps: (i) design of outer primers and assembly oligonucleotide set with a melting temperature difference of >10°C and (ii) utilization of annealing temperatures to selectively control the efficiencies of oligonucleotide assembly and full-length template amplification. In addition, we have combined the proposed method with real-time PCR to analyze the step-wise efficiency and the kinetics of the gene synthesis process. Gel electrophoresis results are compared with real-time fluorescence signals to investigate the effects of oligonucleotide concentration, outer primer concentration, stringency of annealing temperature, and number of PCR cycles. Analysis of the experimental results has led to insights into the gene synthesis process. We further discuss the conditions for preventing the formation of spurious DNA products. The TD real-time gene synthesis method provides a simple and efficient method for assembling fairly long DNA sequence, and aids in optimizing gene synthesis conditions. To our knowledge, this is the first report that utilizes real-time PCR for gene synthesis.     

Adaptation to DNA damage and stimulation of genetic instability: the double-edged sword mammalian DNA polymerase kappa

A major tolerance mechanism that functions to replicate damaged genomic DNA across lesions that have escaped elimination by repair mechanism is translesion DNA synthesis (TLS). DNA polymerase kappa (Pol kappa), a specialised low-fidelity DNA polymerase which is able to perform DNA synthesis across several damaged bases, is one of the enzymes involved in the process. The mutagenic nature of Pol kappa implies that its expression must be tightly regulated to prevent the formation of excessive genetic disorders along undamaged parts of the genome. Indeed, Pol kappa overexpression, which is notably observed in lung cancer, results not only in increased spontaneous mutagenesis, but also in pleiotropic alterations such as DNA breaks, genetic exchanges and aneuploidy. This review will discuss both aspects of DNA polymerase kappa, which can be considered as a genomic supervisor participating in genome maintenance and when misregulated as a genetic instability enhancer as well.     

Elucidation of an archaeal replication protein network to generate enhanced PCR enzymes.

Thermostable DNA polymerases are an important tool in molecular biology. To exploit the archaeal repertoire of proteins involved in DNA replication for use in PCR, we elucidated the network of proteins implicated in this process in Archaeoglobus fulgidus. To this end, we performed extensive yeast two-hybrid screens using putative archaeal replication factors as starting points. This approach yielded a protein network involving 30 proteins potentially implicated in archaeal DNA replication including several novel factors. Based on these results, we were able to improve PCR reactions catalyzed by archaeal DNA polymerases by supplementing the reaction with predicted polymerase co-factors. In this approach we concentrated on the archaeal proliferating cell nuclear antigen (PCNA) homologue. This protein is known to encircle DNA as a ring in eukaryotes, tethering other proteins to DNA. Indeed, addition of A. fulgidus PCNA resulted in marked stimulation of PCR product generation. The PCNA-binding domain was determined, and a hybrid DNA polymerase was constructed by grafting this domain onto the classical PCR enzyme from Thermus aquaticus, Taq DNA polymerase. Addition of PCNA to PCR reactions catalyzed by the fusion protein greatly stimulated product generation, most likely by tethering the enzyme to DNA. This sliding clamp-induced increase of PCR performance implies a promising novel micromechanical principle for the development of PCR enzymes with enhanced processivity.     

AutoDimer: a screening tool for primer-dimer and hairpin structures

The ability to select short DNA oligonucleotide sequences capable of binding solely to their intended target is of great importance in developing nucleic acid based detection technologies. Applications such as multiplex PCR rely on primers binding to unique regions in a genome. Competing side reactions with other primer pairs or template DNA decrease PCR efficiency: Freely available primer design software such as Primer3 screens for potential hairpin and primer-dimer interactions while selecting a single primer pair. The development of multiplex PCR assays (in the range of 5 to 20 loci) requires the screening of all primer pairs for potential cross-reactivity. However, a logistical problem results due to the number of total number of comparisons required. Comparing the primer set for a 10-plex assay (20 total primer sequences) results in 210 primer-primer combinations that must be screened. The ability to screen sets of candidate oligomers rapidly for potential cross-reactivity reduces overall assay devlelopment time. Here we report the application of a familiar sliding algorithm for comparing two strands of DNA in an overlapping fashion. The algorithm has been employed in a software package wherein the user can compare multiple sequences in a single computational run. After the screening is completed, a score is assigned to potential duplex interactions exceeding a user-defined threshold. Additional criteria of predicted melting temperature (Tm) and free energy of melting (deltaG) are included for further ranking. Sodium counterion and total stand concentrations can be adjusted for the Tm and deltaG calculations. The predicted interactions are saved in a text file for further evaluation.