Micropropagation of Hedychium coronarium J. Koenig through rhizome bud

An optimized protocol was developed for in vitro plant regeneration of a medicinally important herb Hedychium coronarium J. Koenig using sprouted buds of rhizomes. The rhizomes with sprouted bud were inoculated on Murashige and Skoog (Physiol Plant 15:473–497, 1962) medium (MS) supplemented with either N⁶-benzyladenine (BA) alone (1.0–4.0 mg L⁻¹) or in combination with 0.5 mg L⁻¹ naphthalene acetic acid (NAA). Of these combinations, MS supplemented with a combination of 2.0 mg L⁻¹ BA and 0.5 mg L⁻¹ NAA was most effective. In this medium, best shoots (3.6) and roots (4.0) regeneration was observed simultaneously with an average shoot and root length of 4.7 cm and 4.2 cm respectively. Regeneration of shoots and roots in the same medium at the same time (One step shoot and root regeneration) reduced the time for production of in vitro plantlets and eliminates the media cost of rooting. Cent-percent (100 %) success in plant establishment was observed in both gradual acclimatization process as well as when plants were directly transferred to outdoor in clay pots containing a mixture of garden soil and sand (2:1) without any sequential acclimatization stage.     

Zinc deficiency or excess within the physiological range increases genome instability and cytotoxicity, respectively, in human oral keratinocyte cells

Zinc (Zn) is an essential component of Zn-finger proteins and acts as a cofactor for enzymes required for cellular metabolism and in the maintenance of DNA integrity. The study investigated the genotoxic and cytotoxic effects of Zn deficiency or excess in a primary human oral keratinocyte cell line and determined the optimal concentration of two Zn compounds (Zn Sulphate (ZnSO₄) and Zn Carnosine (ZnC)) to minimise DNA damage. Zn-deficient medium (0 μM) was produced using Chelex treatment, and the two Zn compounds ZnSO₄ and ZnC were tested at concentrations of 0.0, 0.4, 4.0, 16.0, 32.0 and 100.0 μM. Cell viability was decreased in Zn-depleted cells (0 μM) as well as at 32 μM and 100 μM for both Zn compounds (P < 0.0001) as measured via the MTT assay. DNA strand breaks, as measured by the comet assay, were found to be increased in Zn-depleted cells compared with the other treatment groups (P < 0.05). The Cytokinesis Block Micronucleus Cytome assay showed a significant increase in the frequency of both apoptotic and necrotic cells under Zn-deficient conditions (P < 0.05). Furthermore, elevated frequencies of micronuclei (MNi), nucleoplasmic bridges (NPBs) and nuclear buds (NBuds) were observed at 0 and 0.4 μM Zn, whereas these biomarkers were minimised for both Zn compounds at 4 and 16 μM Zn (P < 0.05), suggesting these concentrations are optimal to maintain genome stability. Expression of PARP, p53 and OGG1 measured by western blotting was increased in Zn-depleted cells indicating that DNA repair mechanisms are activated. These results suggest that maintaining Zn concentrations within the range of 4–16 μM is essential for DNA damage prevention in cultured human oral keratinocytes.     

Analysis of Different Prognostic Indicators for Malnutrition and Shigella flexneri Infection Among the Children in Bangladesh

The present study investigates into some socio-economic, demographic, and nutritional features that can predispose Bangladeshi children to malnutrition and Shigella flexneri infection. Significant prognostic indicators associated with malnutrition were mother’s illiteracy (unadjusted odds ratio, OR = 2.580; 95% confidence interval, CI = 1.134–5.867 and adjusted odds ratio, ORa, 3.814; 95% CI = 1.124–12.943), low birth weight (OR = 3.143; 95% CI = 1.2–8.232 and ORa = 2.404; 95% CI = 0.870–6.644) and poor socioeconomic status (OR = 2.549; 95% CI = 1.382–4.701 and ORa = 1.808; 95% CI = 0.852–3.838). Age was the strongest predictor for the acquisition of S. flexneri infection in the studied population (OR = 5.472; 95% CI = 2.583–11.592 and ORa = 5.808; 95% CI = 2.420–13.942). The severity of malnutrition was significantly (P = 0.033) related to seroprevalence of S. flexneri infection. To reduce malnutrition emphasis should be given on controlling the incidence of low birth weight, improving the literacy status especially of mothers and narrowing the gap between different socio-economic levels. Malnourished children should be examined for severity and direct intervention therapy should be given when necessary.     

Microbial Dynamics and Diversity of Bacillus thuringiensis in Textile Effluent Polluted and Non-polluted Rice Field Soils of Orissa, India

Microbial diversity was assessed in the soils of non-polluted rice fields of Central Rice Research Institute and Choudwar, and textile effluent contaminated (about 30 years) rice fields of Choudwar about 4 years after cessation of pollution. The soils contained 0.62–1.01 % organic C and 0.07–0.12 % total N, and measured 6.18–8.24 pH and 0.6–2.68 mS/cm Eh which were more in the polluted Choudwar soil. The microbial populations (×10⁶ cfu/g soil) in the soils were: heterotrophs 1.21–10.9, spore formers 0.9–2.43, Gram (−)ve bacteria 4.11–8.0, nitrifiers 0.72–1.5, denitrifiers 0.72–2.43, phosphate solubilizers 0.14–0.9, asymbiotic nitrogen fixers 0.34–0.59, actinomycetes 0.07–0.11, fungi 0–0.5 and Bacillus thuringiensis (Bt) 0.4–0.61 which predominated in the polluted soil of Choudwar. The fungi were scarce in the polluted rice fields. The Bt isolates belonged to three motile and one non-motile group. Two motile Bt isolates were phenotyped as Bt subsp. sotto and israelensis, whereas, the non-motile isolate was Bt subsp. wahuensis. All Bt isolates produced extracellular protease, lipase and amylase enzymes. The microbial guilds had positive correlation among themselves, as well as, with soil physico-chemical characters but the fungi had negative relation and the nitrogen fixers were unrelated with the biotic and abiotic components.     

Membrane Damage Induced by Supercritical Carbon Dioxide in Rhodotorula mucilaginosa

To clarify the mechanism of microbial inactivation by supercritical carbon dioxide (SCCO₂), membrane damage of Rhodotorula mucilaginosa was investigated within specific pressure (10 Mpa), temperature (37 °C), and treatment time (10–70 min) ranges, including cell morphological structure, membrane permeability and fluidity. SEM and TEM observations showed morphological changes in the cell envelope and intracellular organization after SCCO₂ treatment. Increase of membrane permeability was measured as increased uptake of the trypan blue dye with microscopy, and leakage of intracellular substances such as UV-absorbing materials and ions by determining the change of protein and electrical conductivity. The SCCO₂ mediated reduction in CFU ml⁻¹ was 0.5–1 log higher at 37 °C and 10 MPa for 60 min in Rose Bengal Medium containing 4 % sodium than a similar treatment in Rose Bengal Medium. Membrane fluidity analyzed by fluorescence polarization method using 1,6-diphenyl-1,3,5-hexatriene showed that the florescence polarization and florescence anisotropy of the SCCO₂-treated cells were increased slightly and gently compared with the untreated cells. The correlation between membrane damage and death of cells under SCCO₂ was clear, and the membrane damage was a key factor induced the inactivation of cells.     

Rapid in vitro propagation,conservation and analysis of genetic stability of Viola pilosa

A protocol for in vitro propagation was developed for Viola pilosa, a plant of immense medicinal value. To start with in vitro propagation, the sterilized explants (buds) were cultured on MS basal medium supplemented with various concentrations of growth regulators. One of the medium compositions MS basal + 0.5 mg/l BA + 0.5 mg/l TDZ + 0.5 mg/l GA₃ gave best results for in vitro shoot bud establishment. Although the problem of shoot vitrification occurred on this medium but this was overcome by transferring the vitrified shoots on MS medium supplemented with 1 mg/l BA and 0.25 mg/l Kn. The same medium was found to be the best medium for further in vitro shoot multiplication. 100 % root induction from in vitro grown shoots was obtained on half strength MS medium supplemented with 1 mg/l IBA. In vitro formed plantlets were hardened and transferred to soil with 83 % survival. Additionally, conservation of in vitro multiplying shoots was also attempted using two different approaches namely slowing down the growth at low temperature and cryopreservation following vitrification. At low temperature retrieval rate was better at 10 °C than at 4 °C after conservation of in vitro multiplying shoots. In cryopreservation–vitrification studies, the vitrified shoot buds gave maximum retrieval of 41.66 % when they were precooled at 4 °C, while only 16.66 % vitrified shoots were retrieved from those precooled at 10 °C. Genetic stability of the in vitro grown plants was analysed by RAPD and ISSR markers which indicated no somaclonal variation among in vitro grown plants demonstrating the feasibility of using the protocol without any adverse genetical effects.     

Carbon storage in China's forest ecosystems: estimation by different integrative methods

Carbon (C) storage for all the components, especially dead mass and soil organic carbon, was rarely reported and remained uncertainty in China''s forest ecosystems. This study used field‐measured data published between 2004 and 2014 to estimate C storage by three forest type classifications and three spatial interpolations and assessed the uncertainty in C storage resulting from different integrative methods in China''s forest ecosystems. The results showed that C storage in China''s forest ecosystems ranged from 30.99 to 34.96 Pg C by the six integrative methods. We detected 5.0% variation (coefficient of variation, CV, %) among the six methods, which was influenced mainly by soil C estimates. Soil C density and storage in the 0–100 cm soil layer were estimated to be 136.11–153.16 Mg C·ha⁻¹ and 20.63–23.21 Pg C, respectively. Dead mass C density and storage were estimated to be 3.66–5.41 Mg C·ha⁻¹ and 0.68–0.82 Pg C, respectively. Mean C storage in China''s forest ecosystems estimated by the six integrative methods was 8.557 Pg C (25.8%) for aboveground biomass, 1.950 Pg C (5.9%) for belowground biomass, 0.697 Pg C (2.1%) for dead mass, and 21.958 Pg C (66.2%) for soil organic C in the 0–100 cm soil layer. The R:S ratio was 0.23, and C storage in the soil was 2.1 times greater than in the vegetation. Carbon storage estimates with respect to forest type classification (38 forest subtypes) were closer to the average value than those calculated using the spatial interpolation methods. Variance among different methods and data sources may partially explain the high uncertainty of C storage detected by different studies. This study demonstrates the importance of using multimethodological approaches to estimate C storage accurately in the large‐scale forest ecosystems.     

Optimising Drug Solubilisation in Amorphous Polymer Dispersions: Rational Selection of Hot-melt Extrusion Processing Parameters

The aim of this article was to construct a T–ϕ phase diagram for a model drug (FD) and amorphous polymer (Eudragit® EPO) and to use this information to understand the impact of how temperature–composition coordinates influenced the final properties of the extrudate. Defining process boundaries and understanding drug solubility in polymeric carriers is of utmost importance and will help in the successful manufacture of new delivery platforms for BCS class II drugs. Physically mixed felodipine (FD)–Eudragit^® EPO (EPO) binary mixtures with pre-determined weight fractions were analysed using DSC to measure the endset of melting and glass transition temperature. Extrudates of 10 wt% FD–EPO were processed using temperatures (110°C, 126°C, 140°C and 150°C) selected from the temperature–composition (T–ϕ) phase diagrams and processing screw speed of 20, 100 and 200rpm. Extrudates were characterised using powder X-ray diffraction (PXRD), optical, polarised light and Raman microscopy. To ensure formation of a binary amorphous drug dispersion (ADD) at a specific composition, HME processing temperatures should at least be equal to, or exceed, the corresponding temperature value on the liquid–solid curve in a F–H T–ϕ phase diagram. If extruded between the spinodal and liquid–solid curve, the lack of thermodynamic forces to attain complete drug amorphisation may be compensated for through the use of an increased screw speed. Constructing F–H T–ϕ phase diagrams are valuable not only in the understanding drug–polymer miscibility behaviour but also in rationalising the selection of important processing parameters for HME to ensure miscibility of drug and polymer.KEY WORDS: DSC, Flory–Huggins theory, hot-melt extrusion, thermal processing     

Development and Clinical Evaluation of Clotrimazole–β-Cyclodextrin Eyedrops for the Treatment of Fungal Keratitis

Fungal keratitis is a serious corneal disease that may result in loss of vision. There are limited treatment options available in Iraqi eye hospitals which might be the main reason behind the poor prognosis of many cases. The purpose of this study was to prepare and pharmaceutically evaluate clotrimazole–β-cyclodextrin (CTZ–β-CD) eyedrops then clinically assess its therapeutic efficacy on fungal keratitis compared with extemporaneous amphotericin B eyedrops (0.5% w/v). A CTZ–β-CD ophthalmic solution was prepared and evaluated by various physicochemical, microbiological, and biological tests. The prepared formula was stable in 0.05 M phosphate buffer pH 7.0 at 40 ± 2°C and 75 ± 5% RH for a period of 6 months. Light has no significant effect on the formula’s stability. The CTZ–β-CD eyedrops efficiently complied with the isotonicity, sterility, and antimicrobiological preservative effectiveness tests. Results of the clinical study revealed that 20 (80%) patients showed a favorable response to the CTZ–β-CD eyedrops, while 16 patients (64%) exhibited a favorable response to amphotericin B (P > 0.05). The mean course of treatment was significantly (P < 0.05) less in the CTZ treatment group than in the amphotericin group (21.5 ± 5.2 vs. 28.3 ± 6.4 days, respectively). The CTZ formulation was significantly (P < 0.05) more effective in the management of severe cases and also against Candida sp. than amphotericin B. There was no significant difference (P < 0.05) between both therapies against filamentous fungi. The CTZ–β-CD formulation can be used alternatively to other ophthalmic antimycotic treatment options in developing countries where stability, cost, or efficacy is a limiting factor.Key words: clotrimazole, β-cyclodextrin, eyedrops, fungal keratitis, Iraq     

Pushed to the limit: consequences of climate change for the Araucariaceae: a relictual rain forest family

Background and Aims

Under predicted climate change scenarios, increased temperatures are likely to predispose trees to leaf and other tissue damage, resulting in plant death and contraction of already narrow distribution ranges in many relictual species. The effects of predicted upward temperatures may be further exacerbated by changes in rainfall patterns and damage caused by frosts on trees that have been insufficiently cold-hardened. The Araucariaceae is a relictual family and the seven species found in Australia have limited natural distributions characterized by low frost intensity and frequency, and warm summer temperatures. The temperature limits for these species were determined in order to help understand how such species will fare in a changing climate.

Methods

Experiments were conducted using samples from representative trees of the Araucariaceae species occurring in Australia, Agathis (A. atropurpurea, A. microstachya and A. robusta), Arauacaria (A. bidwilli, A. cunninghamii and A. heterophylla) and Wollemia nobilis. Samples were collected from plants grown in a common garden environment. Lower and higher temperature limits were determined by subjecting detached winter-hardened leaves to temperatures from 0 to –17 °C and summer-exposed leaves to 25 to 63 °C, then measuring the efficiency of photosystem II (F_v/F_m) and visually rating leaf damage. The exotherm, a sharp rise in temperature indicating the point of ice nucleation within the cells of the leaf, was measured on detached leaves of winter-hardened and summer temperature-exposed leaves.

Key Results

Lower temperature limits (indicated by FT₅₀, the temperature at which PSII efficiency is 50 %, and LT₅₀ the temperature at which 50 % visual leaf damage occurred) were approx. –5·5 to –7·5 °C for A. atropurpurea, A. microstachya and A. heterophylla, approx. –7 to –9 °C for A. robusta, A. bidwillii and A. cunninghamii, and –10·5 to –11 °C for W. nobilis. High temperature damage began at 47·5 °C for W. nobilis, and occurred in the range 48·5–52 °C for A. bidwillii and A. cunninghamii, and in the range 50·5–53·5 °C for A. robusta, A. microstachya and A. heterophylla. Winter-hardened leaves had ice nucleation temperatures of –5·5 °C or lower, with W. nobilis the lowest at –6·8 °C. All species had significantly higher ice nucleation temperatures in summer, with A. atropurpurea and A. heterophylla forming ice in the leaf at temperatures >3 °C higher in summer than in winter. Wollemia nobilis had lower FT₅₀ and LT₅₀ values than its ice nucleation temperature, indicating that the species has a degree of ice tolerance.

Conclusions

While lower temperature limits in the Australian Araucariaceae are generally unlikely to affect their survival in wild populations during normal winters, unseasonal frosts may have devastating effects on tree survival. Extreme high temperatures are not common in the areas of natural occurrence, but upward temperature shifts, in combination with localized radiant heating, may increase the heat experienced within a canopy by at least 10 °C and impact on tree survival, and may contribute to range contraction. Heat stress may explain why many landscape plantings of W. nobilis have failed in hotter areas of Australia.     

Long-term performance of the St Jude Riata 1580–1582 ICD lead family

Objective

Safety concerns about the Riata ICD shock lead were recently raised, with insulation failure due to conductor externalisation. Its incidence and presentation were assessed, and predictors of insulation failure and lead survival of the Riata 1580–1582 were studied, retrospectively, before the official recall.

Methods

All 374 patients at the Erasmus Medical Center between July 2003 and December 2007 with a 1580, 1581 or 1582 shock lead.

Results

The majority of the patients were male (78 %), with a median age of 60 years (IQR 52–70); primary prevention in 61 %. Median follow-up was 60.3 months (IQR 35.5–73.2), with 117 (31 %) patients dying. Electrical abnormalities (mainly noise, 65 %) were observed in 20/257 patients (7.8 %). Definite conductor externalisation was confirmed with fluoroscopy or chest X-ray in 16 patients, and in one after extraction. One patient presented with a drop in the high-voltage impedance trend with a short circuit of the ICD system during defibrillation testing, and needed to be shocked externally. In 8 more patients, conductor externalisation was found during an elective procedure. No predictors of externalisation could be found, except for the use of single coil (p = 0.02). Median time to conductor externalisation was 5 years (IQR 3.1–6.2). Lead externalisation was observed in 5.4 % (95 % CI 3.1–9.3) at 5 years and 22.7 % (95 % CI 13.6–36.6) at 8 years.

Conclusion

A high incidence of insulation defects associated with conductor externalisation in the Riata ICD lead family is observed. The mode of presentation is diverse. This type of insulation failure can lead to failure of therapy delivery.     

High rates of growth recorded for hawksbill sea turtles in Anegada,British Virgin Islands

Management of species of conservation concern requires knowledge of demographic parameters, such as rates of recruitment, survival, and growth. In the Caribbean, hawksbill turtles (Eretmochelys imbricata) have been historically exploited in huge numbers to satisfy trade in their shells and meat. In the present study, we estimated growth rate of juvenile hawksbill turtles around Anegada, British Virgin Islands, using capture–mark–recapture of 59 turtles over periods of up to 649 days. Turtles were recaptured up to six times, having moved up to 5.9 km from the release location. Across all sizes, turtles grew at an average rate of 9.3 cm year⁻¹ (range 2.3–20.3 cm year⁻¹), and gained mass at an average of 3.9 kg year⁻¹ (range 850 g–16.1 kg year⁻¹). Carapace length was a significant predictor of growth rate and mass gain, but there was no relationship between either variable and sea surface temperature. These are among the fastest rates of growth reported for this species, with seven turtles growing at a rate that would increase their body size by more than half per year (51–69% increase in body length). This study also demonstrates the importance of shallow water reef systems for the developmental habitat for juvenile hawksbill turtles. Although growth rates for posthatching turtles in the pelagic, and turtles larger than 61 cm, are not known for this population, the implications of this study are that Caribbean hawksbill turtles in some areas may reach body sizes suggesting sexual maturity in less time than previously considered.     

Highly Sensitive Spectrofluorimetric Method for Determination of Certain Aminoglycosides in Pharmaceutical Formulations and Human Plasma

A simple, reliable, highly sensitive and selective spectrofluorimetric method has been developed for determination of certain aminoglycosides namely amikacin sulfate, tobramycin, neomycin sulfate, gentamicin sulfate, kanamycin sulfate and streptomycin sulfate. The method is based on the formation of a charge transfer complexes between these drugs and safranin in buffer solution of pH 8. The formed complexes were quantitatively extracted with chloroform under the optimized experimental conditions. These complexes showed an excitation maxima at 519–524 nm and emission maxima at 545–570 nm. The calibration plots were constructed over the range of 4–60 pg mL⁻¹ for amikacin, 4–50 pg mL⁻¹ for gentamicin, neomycin and kanamycin, 4–40 pg mL⁻¹ for streptomycin and 5–50 pg mL⁻¹ for tobramycin. The proposed method was successfully applied to the analysis of the cited drugs in dosage forms. The proposed method was validated according to ICH and USP guidelines with respect to specificity, linearity, accuracy, precision and robustness. The high sensitivity of the proposed method allowed determination of amikacin and gentamicin in spiked and real human plasma.Key words: aminoglycosides, dosage forms, human plasma, safranin, spectrofluorimetry     

Cold-Induced Vasodilation during Single Digit Immersion in 0°C and 8°C Water in Men and Women

The present study compared the thermal responses of the finger to 0 and 8°C water immersion, two commonly used temperatures for cold-induced vasodilation (CIVD) research. On two separate and counterbalanced occasions 15 male and 15 female participants immersed their index finger in 20°C water for 5 min followed by either 0 or 8°C water for 30 min. Skin temperature, cardiovascular and perceptual data were recorded. Secondary analyses were performed between sexes and comparing 0.5, 1 and 4°C CIVD amplitude thresholds. With a 0.5°C threshold, CIVD waves were more prevalent in 8°C (2 (1 – 3) than in 0°C (1.5 (0 – 3)), but the amplitude was lower (4.0 ± 2.3 v 9.2 ± 4.0°C). Mean, minimum and maximum finger temperatures were lower in 0°C during the 30 min immersion, and CIVD onset and peak time occurred later in 0°C. Thermal sensation was lower and pain sensation was higher in 0°C. There were no differences between males and females in any of the physiological or CIVD data with the exception of SBP, which was higher in males. Females reported feeling higher thermal sensations in 8°C and lower pain sensations in 0°C and 8°C compared to males. Fewer CIVD responses were observed when using a 4°C (1 (0 – 3)) threshold to quantify a CIVD wave compared to using a 1°C (2 (0 – 3)) or 0.5°C (2 (0 – 3)) amplitude. In conclusion, both 0 and 8 °C can elicit CIVD but 8°C may be more suitable when looking to optimise the number of CIVD waves while minimising participant discomfort. The CIVD response to water immersion does not appear to be influenced by sex. Researchers should consider the amplitude threshold that was used to determine a CIVD wave when interpreting previous data.     

Clinical course of patients diagnosed with severe aortic stenosis in the Rotterdam area: insights from the AVARIJN study

Objective

To prospectively evaluate the clinical course of patients with severe aortic stenosis (AS) and identify factors associated with treatment selection and patient outcome.

Methods

Patients diagnosed with severe AS in the Rotterdam area were included between June 2006 and May 2009. Patient characteristics, echocardiogram, brain natriuretic peptide (NT-proBNP), and treatment strategy were assessed at baseline, and after 6, 12, and 24 months. Endpoints were aortic valve replacement (AVR) / transcatheter aortic valve implantation (TAVI) and death.

Results

The study population comprised 191 patients, 132 were symptomatic and 59 asymptomatic at study entry. Two-year cumulative survival of symptomatic patients was 89.8 % (95 % CI 79.8–95.0 %) after AVR/TAVI and 72.6 % (95 % CI 59.7–82.0 %) with conservative treatment. Two-year cumulative survival of asymptomatic patients was 91.5 % (95 % CI 80.8–96.4 %). Two-year cumulative incidence of AVR/TAVI was 55.9 % (95 % CI 47.5–63.5 %) in symptomatic patients. Sixty-eight percent of asymptomatic patients developed symptoms, median time to symptoms was 13 months; AVR/TAVI cumulative incidence was 38.3 % (95 % CI 23.1–53.3 %). Elderly symptomatic patients with multiple comorbidities were more likely to receive conservative treatment.

Conclusions

In contemporary Dutch practice many symptomatic patients do not receive invasive treatment of severe AS. Two-thirds of asymptomatic patients develop symptoms within 2 years, illustrating the progressive nature of severe AS. Treatment optimisation may be achieved through careful individualised assessment in a multidisciplinary setting.     

Hospitalized dogs recovery from naturally occurring heatstroke; does serum heat shock protein 72 can provide prognostic biomarker?

Heatstroke is a serious illness in dogs characterized by core temperatures above 41 °C with central nervous system dysfunction. Experimental heatstroke models have tried to correlate biomarker levels with the severity of the syndrome. Serum heat shock protein (eHSP70) levels were recently evaluated as a biomarker of heat tolerance and acclimation, their role as a marker of heatstroke is inconclusive. Here, we monitored eHSP70 levels in correlation with systemic biomarkers in 30 naturally occurring canine heatstroke cases. Thirty dogs diagnosed with environmental (33 %) or exertional (66 %) heatstroke admitted to hospital (0–14 h post-injury) were tested for biomarkers of organ damage and coagulation parameters. eHSP70 levels were measured upon admission and 4, 12, and 24 h later (T1, T2, and T3, respectively). No differences were found between exertional and environmental heatstroke cases. The eHSP profile demonstrated an inverted bell shape, with the lowest levels at the 12 h time point. A positive correlation between eHSP70, lactate, and aPPT was also noted at T2 in all the dogs in the study. Twenty-four h after presentation, eHSP70 levels returned to those measured upon admission, this change was only significant in the survivors. The obtained results suggest that eHSP72 level profile may be predictive of survival.     

Establishment of callus and cell suspension culture of Scrophularia striata Boiss.: an in vitro approach for acteoside production

In the present study, a protocol was optimized for establishment of callus and cell suspension culture of Scrophularia striata Boiss. as a strategy to obtain an in vitro acteoside producing cell line for the first time. The effects of growth regulators were analyzed to optimize the biomass growth and acteoside production. The stem explant of S. striata was optimum for callus induction. Modified Murashige and Skoog medium supplemented with 0.5 mg/l naphthalene acetic acid + 2.0 mg/l benzyl adenine was the most favorable medium for callus formation with the highest induction rate (100 %), the best callus growth and the highest acteoside content (1.6 μg/g fresh weight). Incompact and rapid growing suspension cells were established in the liquid medium supplemented with 0.5 mg/l naphthalene acetic acid + 2.0 mg/l benzyl adenine. The optimum time of subculture was found to 17–20 days. Acteoside content in the cell suspension was high during exponential growth phase and decreased subsequently at the stationary phase. The maximum content of acteoside (about 14.25 μg/g cell fresh weight) was observed on the 17th day of the cultivation cycle. This study provided an efficient way to further regulation of phenylethanoid glycoside biosynthesis and production of valuable acteoside, a phenylethanoid glycoside, on scale-up in S. striata cell suspension culture.     

Long-term occupational exposure to organic solvents affects color vision, contrast sensitivity and visual fields

The purpose of this study was to evaluate the visual outcome of chronic occupational exposure to a mixture of organic solvents by measuring color discrimination, achromatic contrast sensitivity and visual fields in a group of gas station workers. We tested 25 workers (20 males) and 25 controls with no history of chronic exposure to solvents (10 males). All participants had normal ophthalmologic exams. Subjects had worked in gas stations on an average of 9.6±6.2 years. Color vision was evaluated with the Lanthony D15d and Cambridge Colour Test (CCT). Visual field assessment consisted of white-on-white 24–2 automatic perimetry (Humphrey II-750i). Contrast sensitivity was measured for sinusoidal gratings of 0.2, 0.5, 1.0, 2.0, 5.0, 10.0 and 20.0 cycles per degree (cpd). Results from both groups were compared using the Mann–Whitney U test. The number of errors in the D15d was higher for workers relative to controls (p<0.01). Their CCT color discrimination thresholds were elevated compared to the control group along the protan, deutan and tritan confusion axes (p<0.01), and their ellipse area and ellipticity were higher (p<0.01). Genetic analysis of subjects with very elevated color discrimination thresholds excluded congenital causes for the visual losses. Automated perimetry thresholds showed elevation in the 9°, 15° and 21° of eccentricity (p<0.01) and in MD and PSD indexes (p<0.01). Contrast sensitivity losses were found for all spatial frequencies measured (p<0.01) except for 0.5 cpd. Significant correlation was found between previous working years and deutan axis thresholds (rho = 0.59; p<0.05), indexes of the Lanthony D15d (rho = 0.52; p<0.05), perimetry results in the fovea (rho = −0.51; p<0.05) and at 3, 9 and 15 degrees of eccentricity (rho = −0.46; p<0.05). Extensive and diffuse visual changes were found, suggesting that specific occupational limits should be created.     

Physicochemical Performances of Indomethacin in Cholesteryl Cetyl Carbonate Liquid Crystal as a Transdermal Dosage

A transdermal formulation of indomethacin (IMC) was developed by incorporation into cholesteryl cetyl carbonate (CCC). The liquid crystalline phase properties of the IMC–CCC mixture were detected by polarized light microscopy and differential scanning calorimetry. A low drug loading was obtained (1–5 %) similar to that used in conventional topical IMC in a clinical setting. A controlled release of IMC was found over 12 h. A low amount of IMC in 1 % IMC–CCC permeated the stratum corneum. Further formulation development has been carried out by the addition of lauryl alcohol into 5 % IMC–CCC mixture it was found that the permeation of IMC was significantly improved to 45 % within 24 h.KEY WORDS: permeation, skin, transdermal     

Salt ions and related parameters affect PEI–DNA particle size and transfection efficiency in Chinese hamster ovary cells

Transfection efficiency is directly associated with the expression level and quantity of recombinant protein after the transient transfection of animal cells. The transfection process can be influenced by many still-unknown factors, so it is valuable to study the precise mechanism and explore these factors in gene delivery. Polyethylenimine (PEI) is considered to have high transfection efficiency and endosome-disrupting capacity. Here we aimed to investigate optimal conditions for transfection efficiency by setting different parameters, including salt ion concentration, DNA/PEI ratio, and incubation time. We examined the PEI–DNA particle size using a Malvern particle size analyzer and assessed the transfection efficiency using flow cytometry in Chinese hamster ovary-S cells. Salt ions, higher amounts of PEI tended to improve the aggregation of PEI–DNA particles and the particle size of PEI–DNA complexes and the transfection efficiency were increased. Besides, the particle size was also found to benefit from longer incubation time. However, the transfection efficiency increased to maximum of 68.92 % at an incubation time of 10 min, but decreased significantly thereafter to 23.71 %, when incubating for 120 min (P < 0.05). Besides, PEI–DNA complexes formed in salt-free condition were unstable. Our results suggest DNA and PEI incubated in 300 mM NaCl at a ratio of 1:4 for 10 min could achieve the optimal transfection efficiency. Our results might provide guidance for the optimization of transfection efficiency and the industrial production of recombinant proteins.