Fluorescent colloidal gold: a cytochemical marker for fluorescent and electron microscopy.

The gold method was further developed for fluorescent microscopy. Gold granules (12 nm in size) were labelled with rhodamine conjugates of Concanavalin A and avidin. The fluorescent markers were used to mark cell wall mannan on the yeast Saccharomyces cerevisiae either by the one-step, or by the two-step method via a biotinyl derivative of ConA. By fluorescence or transmission electron microscopy, the two-step method was found to achieve a higher density of marking.     

Localization of α-galactomannan and of wheat germ agglutinin receptors inSchizosaccharomyces pombe

The location of galactomannan on the surface ofSchizosaccharomyces pombe cells was reexamined by scanning electron microscopy by an indirect but specific method using gold markers. The polysaccharide was found on the cell surface and at the end beginning to grow but not on the wall established by division. Galactomannan was also localized onS. pombe thin sections by transmission electron microscopy using the same method. The polysaccharide was found deposited in two layers in the cell wall, i.e. at the periphery of the wall and near the plasmalemma. The septum was also marked but mainly near the plasmalemma. These results indicated that the polysaccharide is elaborated onto the outside of the wall during extension but not during septum formation. When thin sections ofS. pombe were marked with gold granules labeled with wheat germ agglutinin, marking was found in vacuoles but not in the cell wall. This confirmed thatS. pombe cell wall is devoid of chitin.Non-Standard Abbreviations Au gold colloid - RCA_I Ricinus communis lectin - SEM scanning electron microscopy - TEM transmission electron microscopy - WGA wheat germ agglutinin     

Fluorescent colloidal gold: A cytochemical marker for fluorescent and electron microscopy

Summary The gold method was further developed for fluorescent microscopy. Gold granules (12 nm in size) were labelled with rhodamine conjugates of Concanavalin A and avidin. The fluorescent markers were used to mark cell wall mannan on the yeast Saccharomyces cerevisiae either by the one-step, or by the two-step method via a biotinyl derivative of ConA. By fluorescence or transmission electron microscopy, the two-step method was found to achieve a higher density of marking.     

Ultrastructural localization of beta-D-galactan in the nuclei of the myxomycete Physarum polycephalum.

The acellular slime mold Physarum polycephalum produces an extracellular sulfated and phosphorylated beta-D-galactan which was recently isolated from the nuclei of this organism. This polysaccharide has now been localized in the nuclei of P. polycephalum by electron microscopy using a specific "sandwich" technique: thin sections of P. polycephalum microplasmodia were incubated with the Ricinus communis lectin specific for D-galactose residues. The bound lectin was then localized with gold granules labeled with a galactose-terminated glycoprotein (desialylated ceruloplasmin). The galactan was found in the nuclei mainly associated with chromatin and, also, but to a smaller extent, in the cytoplasm and in some vacuoles. The specificity of the method was assessed by marking under the same condition the galactomannan present in the cell wall of the yeast Schizosaccharomyces pombe.     

Location of glycoproteins on milk fat globule membrane by scanning and transmission electron microscopy, using lectin-labelled gold granules

Membrane glycoproteins of bovine and human milk fat globules (MFG) were located by scanning electron microscopy using lectin-labelled gold granules (50 nm diameter) as specific markers. Receptors for wheat germ agglutinin (WGA) and soybean lectin (SBA) were localized in clusters over the whole MFG surface. When MFG were treated with neuraminidase, the density of marking with SBA increased. Marking of MFG with Concanavalin A (ConA) was weak. No marking was obtained with lectins specific for -fucose, -galactose and α- -galactose. When thin sections of MFG marked with WGA (18 nm diameter gold granules) were examined by transmission electron microscopy, the membrane was uniformly marked. Using markers of different sizes (5 and 18 nm diam.) prefixed milk fat globule membranes (MFGM) were simultaneously marked with WGA and SBA. The lectin receptors appeared to belong to different glycoproteins which were clustered. Thin sections of this material showed that the receptors were located on one side of the membrane. No difference was observed between bovine MFG and human MFG from donors having blood group O and A. All results indicated that MFGM is a true biological membrane.     

Localization of α-galactomannan on the surface of Schizosaccharomyces pombe cells by scanning electron microscopy

Galactomannan was localized by scanning and transmission electron microscopy on the cells and cell walls of Schizosaccharomyces pombe. The markers were prepared from colloidal gold granules labelled with an -galactopyranosyl-binding lectin isolated from the seeds of Bandeiraea simplicifolia. Part or all of this -galactomannan was present in the outer layer of the cell wall and was uniformly distributed even on the fission scars.Non-Standard Abbreviations Au lectin-labelled colloid - SEM scanning electron microscopy - TEM transmission electron microscopy     

Ultrastructural localization of β-galactan in the nuclei of the myxomycete Physarum polycephalum

The acellular slime mold Physarum polycephalum produces an extracellular sulfated and phosphorylated β-D-galactan which was recently isolated from the nuclei of this organism. This polysaccharide has now been localized in the nuclei ofP. polycephalum by electron microscopy using a specific “sandwich” technique: thin sections of P. polycephalum microplasmodia were incubated with the Ricinus communis lectin specific for D-galactose residues. The bound lectin was then localized with gold granules labeled with a galactose-terminated glycoprotein (desialylated ceruloplasmin). The galactin was found in the nuclei mainly associated with chromatin and, also, but to a smaller extent, in the cytoplasma and in some vacuoles. The specificity of the method was assessed by marking under the same condition the galactomannan present in the cell wall of the yeast Schizosaccharomyces pombe.     

Ultrastructural localization of soybean agglutinin on thin sections of Glycine max (soybean) var. Altona by the gold method

Summary Soybean agglutinin (SBA) has been localized in Glycine max (soybean) var. Altona at the ultrastructural level by the gold method. SBA was detected by marking thin sections of different part of the seed with gold granules (12 nm in size) labelled with anti-SBA antiserum. Upon examination by transmission electron microscopy, the lectin was found uniformly distributed in most of the protein bodies of the cotyledon. SBA was also present in the embryo axis.     

Chitosan-colloidal gold complexes as polycationic probes for the detection of anionic sites by transmission and scanning electron microscopy

A new cationic colloidal gold complex has been developed for ultrastructural localization of cell surface anionic sites by transmission and scanning electron microscopy. The marker is prepared by labelling gold particles of suitable sizes (6 to 70 nm in diameter) with chitosan, a polymer of beta (1----4)-linked D-glucosamine. Using human red blood cells as a model, chitosan-gold complexes were shown to be specific for anionic sites and at pH 2 for sialic acid residues. The binding capacity of complexes of different sizes with carboxymethyl and phosphorylated celluloses was examined as a function of pH and ionic strength. The results indicated that these complexes can be used under acidic conditions as well as in physiological buffers. The complexes were further tested by transmission and scanning electron microscopy in detecting anionic sites on cells of various origins such as Escherichia coli, Lactobacillus maltaromicus, Lactobacillus reuteri, Saccharomyces cerevisiae, Saccharomyces rouxii, Schizosaccharomyces pombe, Fusarium oxysporum, Catharantus roseus.     

Synthesis of polysaccharide-stabilized gold and silver nanoparticles: a green method

A simple, green method was developed for the synthesis of gold and silver nanoparticles by using polysaccharides as reducing/stabilizing agents. The obtained positively charged chitosan-stabilized gold nanoparticles and negatively charged heparin-stabilized silver nanoparticles were characterized with UV-vis spectroscopy and transmission electron microscopy. The results illustrated the formation of gold and silver nanoparticles inside the nanoscopic polysaccharide templates. Moreover, the morphology and size distribution of prepared gold and silver nanoparticles varied with the concentration of both the polysaccharides and the precursor metal salts.     

Transmission and scanning electron microscopy of changes associated with microcyst formation in the myxamoebae of Physarum polycephalum.

Surface and internal changes associated with transition from myxamoebal to microcyst stages in Physarum polycephalum have been observed with transmission and scanning electron microscopy. Nuclear morphology, granules studded with ribosomal-like particles, synthesis of polysaccharides which are deposited exterior to the cell, and origin of material for the cell wall appear to be similar in the amoeba and in the plasmodium. In addition, the viability of the strain used in this research after being allowed to remain in a quiescent or encysted stage was observed to be approximately six months.     

Three-dimensional locations of gold-labeled proteins in a whole mount eukaryotic cell obtained with 3nm precision using aberration-corrected scanning transmission electron microscopy

Three-dimensional (3D) maps of proteins within the context of whole cells are important for investigating cellular function. However, 3D reconstructions of whole cells are challenging to obtain using conventional transmission electron microscopy (TEM). We describe a methodology to determine the 3D locations of proteins labeled with gold nanoparticles on whole eukaryotic cells. The epidermal growth factor receptors on COS7 cells were labeled with gold nanoparticles, and critical-point dried whole-mount cell samples were prepared. 3D focal series were obtained with aberration-corrected scanning transmission electron microscopy (STEM), without tilting the specimen. The axial resolution was improved with deconvolution. The vertical locations of the nanoparticles in a whole-mount cell were determined with a precision of 3nm. From the analysis of the variation of the axial positions of the labels we concluded that the cellular surface was ruffled. To achieve sufficient stability of the sample under electron beam irradiation during the recording of the focal series, the sample was carbon coated. A quantitative method was developed to analyze the stability of the ultrastructure after electron beam irradiation using TEM. The results of this study demonstrate the feasibility of using aberration-corrected STEM to study the 3D nanoparticle distribution in whole cells.     

Ultrastructure of cells cultured on polycarbonate membranes.

A method is described for preparing undisturbed cell cultures for both scanning and transmission electron microscopy. Cells were propagated on polycarbonate membranes with pores of 0.2 micrometer or less. Cultured cells together with their supports were prepared for both scanning electron microscopy and transmission electron microscopy using routine methods. For transmission electron microscopy a rapid schedule of infiltration and polymerization was used. The method described in this report yielded good results and it allowed the fine structure of cultured cells to be viewed in situ by both scanning electron microscopy and transmission electron microscopy.     

Ultrastructure of Cells Cultured on Polycarbonate Membranes

A method is described for preparing undisturbed cell cultures for both scanning and transmission electron microscopy. Cells were propagated on polycarbonate membranes with pores of 0.2 pm or less. Cultured cells together with their supports were prepared for both scanning electron microscopy and transmission electron microscopy using routine methods. For transmission electron microscopy a rapid schedule of infiltration and polymerization was used. The method described in this report yielded good results and it allowed the fine structure of cultured cells to be viewed in situ by both scanning electron microscopy and transmission electron microscopy.     

Enhancement of Antigenic Site Detection with Gold Labeled Secondary and Tertiary Antibodies Using the Immunogold-Silver Staining Method

We report a modification of the immunogold-silver staining method (IGSS) for localizing hepatic phosphoenolpyruvate carboxykinase (PEPCK) in tissue sections, and we compare the efficacy of localizing the primary antibody with either a 5 nm gold labeled secondary antibody or 5 nm gold labeled secondary and tertiary antibodies. Light microscope examination of 10 μm frozen sections demonstrated that the use of combined secondary and tertiary gold labeled antibodies was superior to using a secondary gold labeled antibody alone. The increased labeling density (number of colloidal gold particles/antigenic site/cell) achieved by combined gold labeled antibodies was confirmed by electron microscopy. The increased labeling density resulted in a two-thirds reduction in the time needed for the IGSS physical development of the silver shells and less background. We achieved intense specific staining of hepatocytes expressing PEPCK while minimizing background staining. The use of combined secondary and tertiary gold labeled antibodies enhances the signal-to-noise ratio, achieves high resolution and is a suitable method for use in both light and electron microscopy.     

Direct labeling of polyphosphate at the ultrastructural level in Saccharomyces cerevisiae by using the affinity of the polyphosphate binding domain of Escherichia coli exopolyphosphatase

Inorganic polyphosphate (polyP) is a linear polymer of orthophosphate and has many biological functions in prokaryotic and eukaryotic organisms. To investigate polyP localization, we developed a novel technique using the affinity of the recombinant polyphosphate binding domain (PPBD) of Escherichia coli exopolyphosphatase to polyP. An epitope-tagged PPBD was expressed and purified from E. coli. Equilibrium binding assay of PPBD revealed its high affinity for long-chain polyP and its weak affinity for short-chain polyP and nucleic acids. To directly demonstrate polyP localization in Saccharomyces cerevisiae on resin sections prepared by rapid freezing and freeze-substitution, specimens were labeled with PPBD containing an epitope tag and then the epitope tag was detected by an indirect immunocytochemical method. A goat anti-mouse immunoglobulin G antibody conjugated with Alexa 488 for laser confocal microscopy or with colloidal gold for transmission electron microscopy was used. When the S. cerevisiae was cultured in yeast extract-peptone-dextrose medium (10 mM phosphate) for 10 h, polyP was distributed in a dispersed fashion in vacuoles in successfully cryofixed cells. A few polyP signals of the labeling were sometimes observed in cytosol around vacuoles with electron microscopy. Under our experimental conditions, polyP granules were not observed. Therefore, it remains unclear whether the method can detect the granule form. The method directly demonstrated the localization of polyP at the electron microscopic level for the first time and enabled the visualization of polyP localization with much higher specificity and resolution than with other conventional methods.     

Preparation of chromosome spreads for electron (TEM,SEM, STEM), light and confocal microscopy

In the past, ultrastructural studies on chromosome morphology have been carried out using light microscopy, scanning electron microscopy and transmission electron microscopy of whole mounted or sectioned samples. Until now, however, it has not been possible to use all of these techniques on the same specimen. In this paper we describe a specimen preparation method that allows one to study the same chromosomes by transmission, scanning-transmission and scanning electron microscopy, as well as by standard light microscopy and confocal microscopy. Chromosome plates are obtained on a carbon coated glass slide. The carbon film carrying the chromosomes is then transferred to electron microscopy grids, subjected to various treatments and observed. The results show a consistent morphological correspondence between the different methods. This method could be very useful and important because it makes possible a direct comparison between the various techniques used in chromosome studies such as banding, in situ hybridization, fluorescent probe localization, ultrastructural analysis, and colloidal gold cytochemical reactionsAbbreviations CLSM confocal laser scanning microscope - EM electron microscopy - kV kilovolt(s) - LM light microscope - SEM scanning electron microscope - STEM scanning-transmission electron microscope - TEM transmission electron microscope     

Conditions critical for optimal visualization of bacteriophage adsorbed to bacterial surfaces by scanning electron microscopy.

The potential of scanning electron microscopy as a tool for the detection of viruses on cell surfaces has been studied using bacteriophage P1 adsorbed to Shigella dysenteriae as a model system. Viral particles were readily detectable by scanning electron microscopy on the surface of infected cells which were fixed with glutaraldehyde followed by postfixation in OsO4 and prepared by critical point drying. The virus-studded surface of the infected cells differed markedly from the relatively smooth surfaces of uninfected control cells. Examination of the same preparations with transmission electron microscopy revealed numerous viral particles adsorbed to the surfaces of infected cells, whereas the control cells were free of viruses as expected. Glutaraldehyde fixation alone did not preserve the surface detail of infected cells: cells adsorbed with viruses were not distinguishable from control cells by scanning electron microscopy although by transmission electron microscopy viruses could be visualized. Air drying from water or absolute alcohol resulted in unsatisfactory preservation as compared to the appearance of infected cells prepared by the critical point method. Thus, scanning electron microscopy is capable of resolving viral particles on cell surfaces, but detection of these particles is completely dependent both on the method of fixation and on the technique of drying used.     

Preparation techniques for the electron microscopy of granular sludge from an anaerobic digester

Several fixation and dehydration techniques for scanning and transmission electron microscopy of glycocalyx and microbial populations within granules from an upflow anaerobic sludge blanket digester purifying a brewery wastewater were compared. Sputter-cryo and freeze-drying techniques prior to scanning electron microscopy (SEM) allowed viewing of the glycocalyx. In contrast standard fixation and dehydration techniques were suitable for examination of underlying microbial populations by both SEM and transmission electron microscopy.     

Direct Labeling of Polyphosphate at the Ultrastructural Level in Saccharomyces cerevisiae by Using the Affinity of the Polyphosphate Binding Domain of Escherichia coli Exopolyphosphatase

Inorganic polyphosphate (polyP) is a linear polymer of orthophosphate and has many biological functions in prokaryotic and eukaryotic organisms. To investigate polyP localization, we developed a novel technique using the affinity of the recombinant polyphosphate binding domain (PPBD) of Escherichia coli exopolyphosphatase to polyP. An epitope-tagged PPBD was expressed and purified from E. coli. Equilibrium binding assay of PPBD revealed its high affinity for long-chain polyP and its weak affinity for short-chain polyP and nucleic acids. To directly demonstrate polyP localization in Saccharomyces cerevisiae on resin sections prepared by rapid freezing and freeze-substitution, specimens were labeled with PPBD containing an epitope tag and then the epitope tag was detected by an indirect immunocytochemical method. A goat anti-mouse immunoglobulin G antibody conjugated with Alexa 488 for laser confocal microscopy or with colloidal gold for transmission electron microscopy was used. When the S. cerevisiae was cultured in yeast extract-peptone-dextrose medium (10 mM phosphate) for 10 h, polyP was distributed in a dispersed fashion in vacuoles in successfully cryofixed cells. A few polyP signals of the labeling were sometimes observed in cytosol around vacuoles with electron microscopy. Under our experimental conditions, polyP granules were not observed. Therefore, it remains unclear whether the method can detect the granule form. The method directly demonstrated the localization of polyP at the electron microscopic level for the first time and enabled the visualization of polyP localization with much higher specificity and resolution than with other conventional methods.