Mechanism of Tet repressor induction by tetracyclines: length compensates for sequence in the alpha8-alpha9 loop

Natural Tet repressor (TetR) variants are alpha-helical proteins bearing a large loop between helices 8 and 9, which is variable in sequence and length. We have deleted this loop consisting of 14 amino acid residues in TetR(D) and rebuilt it stepwise with up to 42 alanine residues. All except the mutant with the longest alanine loop show wild-type repression, but none is inducible with tetracycline. This demonstrates the importance of the alpha8-alpha9 loop and its amino acid sequence for induction. The induction efficiencies increase with loop length, when the more tightly binding inducer anhydrotetracycline is used. The largest increase of inducibility was observed for TetR mutants with loop lengths between eight and 17 alanine residues. Since loop residues Asp/Glu157 and Arg158 are conserved in the natural TetR sequence variants, we constructed a mutant in which all other residues of the loop were replaced by alanine. This mutant exhibits increased anhydrotetracycline induction compared to the corresponding alanine variant. Thus, these residues are important for induction. Binding constants for the anhydrotetracycline-TetR interaction are below the detection level of 10(5) M(-1) for the mutant with a loop of two alanine residues and increase sharply until a loop size of ten residues is reached. TetR variants with longer loops have similar anhydrotetracycline-binding constants, ranging between 2.6 x 10(9) M(-1) and 8.0 x 10(9) M(-1), about 500-fold lower than wild-type TetR. The increase of the affinity occurs at shorter loop lengths than that of inducibility. We conclude that the induction defect of the polyalanine variants arises from two increments: (i) the loop must have a minimal length-to allow efficient inducer binding; (ii) the loop must structurally participate in the conformational change associated with induction.     

NMR structure of a variant human prion protein with two disulfide bridges

The nuclear magnetic resonance structure of the globular domain with residues 121-230 of a variant human prion protein with two disulfide bonds, hPrP(M166C/E221C), shows the same global fold as wild-type hPrP(121-230). It contains three alpha-helices of residues 144-154, 173-194 and 200-228, an anti-parallel beta-sheet of residues 128-131 and 161-164, and the disulfides Cys166-Cys221 and Cys179-Cys214. The engineered extra disulfide bond in the presumed "protein X"-binding site is accommodated with slight, strictly localized conformational changes. High compatibility of hPrP with insertion of a second disulfide bridge in the protein X epitope was further substantiated by model calculations with additional variant structures. The ease with which the hPrP structure can accommodate a variety of locations for a second disulfide bond within the presumed protein X-binding epitope suggests a functional role for the extensive perturbation by a natural second disulfide bond of the corresponding region in the human doppel protein.     

Trp scanning analysis of Tet repressor reveals conformational changes associated with operator and anhydrotetracycline binding.

We analysed the conformational states of free, tet operator-bound and anhydrotetracycline-bound Tet repressor employing a Trp-scanning approach. The two wild-type Trp residues in Tet repressor were replaced by Tyr or Phe and single Trp residues were introduced at each of the positions 162-173, representing part of an unstructured loop and the N-terminal six residues of alpha-helix 9. All mutants retained in vivo inducibility, but anhydrotetracycline-binding constants were decreased up to 7.5-fold when Trp was in positions 169, 170 and 173. Helical positions (168-173) differed from those in the loop (162-167) in terms of their fluorescence emission maxima, quenching rate constants with acrylamide and anisotropies in the free and tet operator-complexed proteins. Trp fluorescence emission decreased drastically upon atc binding, mainly due to energy transfer. For all proteins, either free, tet operator bound or anhydrtetracycline-bound, mean fluorescence lifetimes were determined to derive quenching rate constants. Solvent-accessible surfaces of the respective Trp side chains were calculated and compared with the quenching rate constants in the anhydrotetracycline-bound complexes. The results support a model, in which residues in the loop become more exposed, whereas residues in alpha-helix 9 become more buried upon the induction of TetR by anhydrotetracycline.     

Contribution of individual disulfide bonds to the oxidative folding of ribonuclease A

The eight cysteine residues of ribonuclease A form four disulfide bonds in the native protein. We have analyzed the folding of three double RNase A mutants (C65A/C72A, C58A/C110A, and C26A/C84A, lacking the C65-C72, C58-C110, and C26-C84 disulfide bonds, respectively) and two single mutants (C110A and C26A), in which a single cysteine is replaced with an alanine and the paired cysteine is present in the reduced form. The folding of these mutants was carried out in the presence of oxidized and reduced glutathione, which constitute the main redox agents present within the ER. The use of mass spectrometry in the analysis of the folding processes allowed us (i) to follow the formation of intermediates and thus the pathway of folding of the RNase A mutants, (ii) to quantitate the intermediates that formed, and (iii) to compare the rates of formation of intermediates. By comparison of the folding kinetics of the mutants with that of wild-type RNase A, the contribution of each disulfide bond to the folding process has been evaluated. In particular, we have found that the folding of the C65A/C72A mutant occurs on the same time scale as that of the wild-type protein, thus suggesting that the removal of the C65-C72 disulfide bond has no effect on the kinetics of RNase A folding. Conversely, the C58A/C110A and C26A/C84A mutants fold much more slowly than the wild-type protein. The removal of the C58-C110 and C26-C84 disulfide bonds has a dramatic effect on the kinetics of RNase A folding. Results described in this paper provide specific information about conformational folding events in the regions involving the mutated cysteine residues, thus contributing to a better understanding of the complex mechanism of oxidative folding.     

Protein engineering of a disulfide bond in a beta/alpha-barrel protein.

A disulfide bond has been introduced in the beta/alpha-barrel enzyme N-(5'-phosphoribosyl)anthranilate isomerase from Saccharomyces cerevisiae. The design of this disulfide bond was based on a model structure of this enzyme, built from the high-resolution crystal structure of the N-(5'-phosphoribosyl)anthranilate isomerase domain from Escherichia coli. The disulfide cross-link is spontaneously formed in vitro between residues 27 and 212, located in the structurally adjacent alpha-helices 1 and 8 of the outer helical ring of the beta/alpha-barrel. It creates a loop of 184 residues that account for 83% of the sequence of this enzyme, thus forming a quasi circular protein. The cross-linked mutant enzyme displays wild-type steady-state kinetic parameters. Measurements of the equilibrium constant for the reduction of this disulfide bond by 1,4-dithiothreitol show that its bond strength is comparable to that of other engineered protein disulfide bonds. The oxidized, cross-linked N-(5'-phosphoribosyl)anthranilate isomerase mutant is about 1.0 kcal/mol more stable than the wild-type enzyme, as estimated from its equilibrium unfolding transitions by guanidine hydrochloride.     

Structural and thermodynamic consequences of removal of a conserved disulfide bond from equine beta-lactoglobulin

A disulfide bond between cysteine 66 and cysteine 160 of equine beta-lactoglobulin was removed by substituting cysteine residues with alanine. This disulfide bond is conserved across the lipocalin family. The conformation and stability of the disulfide-deleted mutant protein was investigated by circular dichroism. The mutant protein assumes a native-like structure under physiological conditions and assumes a helix-rich molten globule structure at acid pH or at moderate concentrations of urea as the wild-type protein does. The urea-induced unfolding experiment shows that the stability of the native conformation was reduced but that of the molten globule intermediate is not significantly changed at pH 4 by removal of the disulfide bond. On the other hand, the molten globule at acid pH was destabilized by removal of the disulfide bond. This difference in the stabilizing effect of the disulfide bond was interpreted by the effect of the disulfide in keeping the molecule compact against the electrostatic repulsion at acid pH. In contrast to the wild-type protein, the circular dichroism spectrum in the molten globule state at acid pH depends on anion concentration, suggesting that the expansion of the molecule through electrostatic repulsion induces alpha-helices as observed in the cold denatured state of the wild-type protein.     

蛋白质中二硫键附近肽段识别规律研究

本文对蛋白质中二硫键附近的残基进行了计算机统计分析,结果发现平行和反平行残基间存在着特异的配对规律。这种残基间的相互作用或识别,可能与蛋白质折叠过程中正确地形成二硫键有关。该结果有助于蛋白质工程设计。     

Structure-expression relationship of tumor necrosis factor receptor mutants that increase expression

The extracellular domain of the p55 TNF receptor (TNFrED) is an important therapeutic protein for targeting tumor necrosis factor-alpha (TNF-alpha). The expression level of the TNFrED is low for bioproduction, which is presumably associated with the complication of pairing 24 cysteine residues to form correct disulfide bonds. Here we report the application of the yeast display method to study expression of TNFrED, a multimeric receptor. Randomly mutated libraries of TNFrED were screened, and two mutants were identified that express several-fold higher protein levels compared with the wild type while still retaining normal binding affinity for TNF-alpha. The substituted residues responsible for the higher protein expression in both mutants were identified as proline, and both proline residues are adjacent to cysteine residues involved in disulfide bonds. Analysis of the mutant residues revealed that the improved level of expression is due to conformational restriction of the substituted residues to that of the folded state seen in the crystal structures of TNFrED thereby forcing the neighboring cysteine residues into the correct orientation for proper disulfide bond formation.     

Immobilization of the distal hinge in the labile serpin plasminogen activator inhibitor 1: identification of a transition state with distinct conformational and functional properties

The serpin plasminogen activator inhibitor-1 (PAI-1) plays an important role in the regulation of the fibrinolytic activity in blood. In plasma, PAI-1 circulates mainly in the active conformation. However, PAI-1 spontaneously converts to a latent conformation. This conversion comprises drastic conformational changes in both the distal and the proximal hinge region of the reactive center loop. To study the functional and conformational rearrangements associated solely with the mobility of the proximal hinge, disulfide bonds were introduced to immobilize the distal hinge region. These mutants exhibited specific activities comparable with that of PAI-1-wt. However, the engineered disulfide bond had a major effect on the conformational and associated functional transitions. Strikingly, in contrast to PAI-1-wt, inactivation of these mutants yielded a virtually complete conversion to a substrate-like conformation. Comparison of the digestion pattern (with trypsin and elastase) of the mutants and PAI-1-wt revealed that the inactivated mutants have a conformation differing from that of latent and active PAI-1-wt. Unique trypsin-susceptible cleavage sites arose upon inactivation of these mutants. The localization of these exposed residues provides evidence that a displacement of alphahF has occurred, indicating that the proximal hinge is partly inserted between s3A and s5A. In conclusion, immobilization of the distal hinge region in PAI-1 allowed the identification of an "intermediate" conformation characterized by a partial insertion of the proximal hinge region. We hypothesize that locking PAI-1 in this transition state between active and latent conformations is associated with a displacement of alphahF, subsequently resulting in substrate behavior.     

Conformational changes in the parathyroid hormone receptor associated with activation by agonist

Binding of hormones to their cognate G protein-coupled receptors (GPCRs) induces conformational shifts within the receptor based on evidence from a few hormone-receptor systems. Employing an engineered disulfide bond formation strategy and guided by a previously established model of the PTH-PTH receptor (PTHR)1 bimolecular complex, we set out to document and characterize the nature of agonist-induced changes in this family B GPCR. A mutant PTHR1 was generated which incorporates a Factor Xa cleavage site in the third intracellular loop. Treatment with Factor Xa fragments the receptor. However, if a new disulfide bond was formed before exposure to the enzyme, the fragments remain held together. A set of double cysteine-containing mutants were designed to probe the internal relative movements of transmembrane (TM) helices 2 and TM7. PTH enhanced formation of disulfide bonds in the K240C/F447C and A242C/F447C mutants. For the F238C/F447C mutant, a disulfide bond is formed in the basal state, but is disrupted by interaction with PTH. For the D241C/F447C PTHR1 construct, no disulfide bond formation was observed in either the basal or hormone-bound state. These findings demonstrate that the conformation of PTHR1 is altered from the basal state when PTH is bound. Novel information regarding spatial proximities between TM2 and TM7 of PTHR1 and the nature of relative movements between the two transmembrane regions was revealed. The data confirm and extend the experimentally derived model of the PTH-PTHR1 complex and provide insights at a new level of detail into the early events in PTHR1 activation by PTH.     

Structural basis of gene regulation by the tetracycline inducible Tet repressor-operator system

The tetracycline repressor (TetR) regulates the most abundant resistance mechanism against the antibiotic tetracycline in grain-negative bacteria. The TetR protein and its mutants are commonly used as control elements to regulate gene expression in higher eukaryotes. We present the crystal structure of the TetR homodimer in complex with its palindromic DNA operator at 2.5 A resolution. Comparison to the structure of TetR in complex with the inducer tetracycline-Mg2+ allows the mechanism of induction to be deduced. Inducer binding in the repressor core initiates conformational changes starting with C-terminal unwinding and shifting of the short helix a6 in each monomer. This forces a pendulum-like motion of helix a4, which increases the separation of the attached DNA binding domains by 3 A, abolishing the affinity of TetR for its operator DNA.     

Identification of nonessential disulfide bonds and altered conformations in the v-sis protein, a homolog of the B chain of platelet-derived growth factor.

The protein encoded by v-sis, the oncogene of simian sarcoma virus, is homologous to the B chain of platelet-derived growth factor (PDGF). There are eight conserved Cys residues between PDGF-B and the v-sis protein. Both native PDGF and the v-sis protein occur as disulfide-bonded dimers, probably containing both intramolecular and intermolecular disulfide bonds. Oligonucleotide-directed mutagenesis was used to change the Cys codons to Ser codons in the v-sis gene. Four single mutants lacked detectable biological activity, indicating that Cys-127, Cys-160, Cys-171, and Cys-208 are required for formation of a biologically active v-sis protein. The other four single mutants retained biological activity as determined in transformation assays, indicating that Cys-154, Cys-163, Cys-164, and Cys-210 are dispensable for biological activity. Double and triple mutants containing three of these altered sites were constructed, some of which were transforming as well. The v-sis proteins encoded by biologically active mutants displayed significantly reduced levels of dimeric protein compared with the wild-type v-sis protein, which dimerized very efficiently. Furthermore, a mutant with a termination codon at residue 209 exhibited partial transforming activity. This study thus suggests that the minimal region required for transformation consists of residues 127 to 208. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis indicated that the v-sis proteins encoded by some of the biologically active mutants exhibited an altered conformation when compared with the wild-type v-sis protein, and suggested that Cys-154 and Cys-163 participate in a nonessential disulfide bond.     

Cis proline mutants of ribonuclease A. I. Thermal stability.

A chemically synthesized gene for ribonuclease A has been expressed in Escherichia coli using a T7 expression system (Studier, F.W., Rosenberg, A.H., Dunn, J.J., & Dubendorff, J.W., 1990, Methods Enzymol. 185, 60-89). The expressed protein, which contains an additional N-terminal methionine residue, has physical and catalytic properties close to those of bovine ribonuclease A. The expressed protein accumulates in inclusion bodies and has scrambled disulfide bonds; the native disulfide bonds are regenerated during purification. Site-directed mutations have been made at each of the two cis proline residues, 93 and 114, and a double mutant has been made. In contrast to results reported for replacement of trans proline residues, replacement of either cis proline is strongly destabilizing. Thermal unfolding experiments on four single mutants give delta Tm approximately equal to 10 degrees C and delta delta G0 (apparent) = 2-3 kcal/mol. The reason is that either the substituted amino acid goes in cis, and cis<==>trans isomerization after unfolding pulls the unfolding equilibrium toward the unfolded state, or else there is a conformational change, which by itself is destabilizing relative to the wild-type conformation, that allows the substituted amino acid to form a trans peptide bond.     

On the role of the cis-proline residue in the active site of DsbA

In addition to the Cys-Xaa-Xaa-Cys motif at position 30-33, DsbA, the essential catalyst for disulfide bond formation in the bacterial periplasm shares with other oxidoreductases of the thioredoxin family a cis-proline in proximity of the active site residues. In the variant DsbA(P151A), this residue has been changed to an alanine, an almost isosteric residue which is not disposed to adopt the cis conformation. The substitution strongly destabilized the structure of DsbA, as determined by the decrease in the free energy of folding. The pKa of the thiol of Cys30 was only marginally decreased. Although in vivo the variant appeared to be correctly oxidized, it exhibited an activity less than half that of the wild-type enzyme with respect to the folding of alkaline phosphatase, used as a reporter of the disulfide bond formation in the periplasm. DsbA(P151A) crystallized in a different crystal form from the wild-type protein, in space group P2(1) with six molecules in the asymmetric unit. Its X-ray structure was determined to 2.8 A resolution. The most significant conformational changes occurred at the active site. The loop 149-152 adopted a new backbone conformation with Ala151 in a trans conformation. This rearrangement resulted in the loss of van der Waals interactions between this loop and the disulfide bond. His32 from the Cys-Xaa-Xaa-Cys sequence presented in four out of six molecules in the asymmetric unit a gauche conformation not observed in the wild-type protein. The X-ray structure and folding studies on DsbA(P151A) were consistent with the cis-proline playing a major role in the stabilization of the protein. A role for the positioning of the substrate is discussed. These important properties for the enzyme function might explain the conservation of this residue in DsbA and related proteins possessing the thioredoxin fold.     

Role of individual cysteine residues and disulfide bonds in the structure and function of Aspergillus ribonucleolytic toxin restrictocin.

Restrictocin, produced by the fungus Aspergillus restrictus, belongs to the group of ribonucleolytic toxins called ribotoxins. It specifically cleaves a single phosphodiester bond in a conserved stem and loop structure in the 28S rRNA of large ribosomal subunit and potently inhibits eukaryotic protein synthesis. Restrictocin contains 149 amino acid residues and includes four cysteines at positions 5, 75, 131, and 147. These cysteine residues are involved in the formation of two disulfide bonds, one between Cys 5 and Cys 147 and another between Cys 75 and Cys 131. In the current study, all four cysteine residues were changed to alanine individually and in different combinations by site-directed mutagenesis so as to remove one or both the disulfides. The mutants were expressed and purified from Escherichia coli. Removal of any cysteine or any one of the disulfide bonds individually did not affect the ability of the toxin to specifically cleave the 28S rRNA or to inhibit protein synthesis in vitro. However, the toxin without both disulfide bonds completely lost both ribonucleolytic and protein synthesis inhibition activities. The active mutants, containing only one disulfide bond, exhibited relatively high susceptibility to trypsin digestion. Thus, none of the four cysteine residues is directly involved in restrictocin catalysis; however, the presence of any one of the two disulfide bonds is absolutely essential and sufficient to maintain the enzymatically active conformation of restrictocin. For maintenance of the unique stability displayed by the native toxin, both disulfide bonds are required.     

Binding of phlorizin to the C-terminal loop 13 of the Na(+)/glucose cotransporter does not depend on the [560-608] disulfide bond

The disulfide bonds of the Na(+)/glucose cotransporter (SGLT1) are believed to participate in the binding of the transport inhibitor phlorizin. Here, we investigated the role of the [560-608] disulfide bond on the phlorizin-binding function of the C-terminal loop 13 of SGLT1 using 3-iodoacetamidophlorizin (3-IAP) as a probe. The reactivity of 3-IAP to the fully reduced loop 13 was competitively inhibited by phlorizin, as evident from the MALDI mass spectra. It indicates that the disulfide bond is not mandatory for phlorizin binding. CD and equilibrium unfolding studies showed that the secondary structure and conformation stability of loop 13 were not affected by removing the disulfide bond. Furthermore, we generated a series of loop 13 mutants to assess the contribution of the disulfide bond to phlorizin binding. A positive correlation between the stability and phlorizin affinity of the mutant proteins was observed, implying that the protein stability, rather than the disulfide bond, is relevant to the phlorizin-binding function of loop 13.     

Role of amino acid residues at turns in the conformational stability and folding of human lysozyme

To clarify the role of amino acid residues at turns in the conformational stability and folding of a globular protein, six mutant human lysozymes deleted or substituted at turn structures were investigated by calorimetry, GuHCl denaturation experiments, and X-ray crystal analysis. The thermodynamic properties of the mutant and wild-type human lysozymes were compared and discussed on the basis of their three-dimensional structures. For the deletion mutants, Delta47-48 and Delta101, the deleted residues are in turns on the surface and are absent in human alpha-lactalbumin, which is homologous to human lysozyme in amino acid sequence and tertiary structure. The stability of both mutants would be expected to increase due to a decrease in conformational entropy in the denatured state; however, both proteins were destabilized. The destabilizations were mainly caused by the disappearance of intramolecular hydrogen bonds. Each part deleted was recovered by the turn region like the alpha-lactalbumin structure, but there were differences in the main-chain conformation of the turn between each deletion mutant and alpha-lactalbumin even if the loop length was the same. For the point mutants, R50G, Q58G, H78G, and G37Q, the main-chain conformations of these substitution residues located in turns adopt a left-handed helical region in the wild-type structure. It is thought that the left-handed non-Gly residue has unfavorable conformational energy compared to the left-handed Gly residue. Q58G was stabilized, but the others had little effect on the stability. The structural analysis revealed that the turns could rearrange the main-chain conformation to accommodate the left-handed non-Gly residues. The present results indicate that turn structures are able to change their main-chain conformations, depending upon the side-chain features of amino acid residues on the turns. Furthermore, stopped-flow GuHCl denaturation experiments on the six mutants were performed. The effects of mutations on unfolding-refolding kinetics were significantly different among the mutant proteins. The deletion/substitutions in turns located in the alpha-domain of human lysozyme affected the refolding rate, indicating the contribution of turn structures to the folding of a globular protein.     

Backbone dynamics of Tet repressor alpha8intersectionalpha9 loop

A set of single Trp mutants of class B Tet repressor (TetR), in which Trp residues are located from positions 159 to 167, has been engineered to investigate the dynamics of the loop joining the alpha-helices 8 and 9. The fluorescence anisotropy decay of most mutants can be described by the sum of three exponential components. The longest rotational correlation time, 30 ns at 10 degrees C, corresponds to the overall rotation of the protein. The shortest two components, on the subnanosecond and nanosecond time scale, are related to internal motions of the protein. The initial anisotropy, in the 0.16-0.22 range, indicates the existence of an additional ultrafast motion on the picosecond time scale. Examination of physical models for underlying motions indicates that librational motions of the Trp side chain within the rotameric chi(1) x chi(2) potential wells contribute to the picosecond depolarization process, whereas the subnanosecond and nanosecond depolarization processes are related to backbone dynamics. In the absence of inducer, the order parameters of these motions, about 0.90 and 0.80 for most positions, indicate limited flexibility of the loop backbone. Anhydrotetracycline binding to TetR induces an increased mobility of the loop on the nanosecond time scale. This suggests that entropic factors might play a role in the mechanism of allosteric transition.     

Disulfide bond tethering of extracellular loops does not affect the closure of OmpF porin at acidic pH

The permeability of the outer membrane of gram‐negative bacteria is essentially controlled by pore‐forming proteins of the porin family. The trimeric E. coli porin OmpF is assembled as a triple β‐barrel, where each monomer contains a central pore and extracellular loops. Electrophysiological analysis of the behavior of OmpF at acidic pH reveals that the protein undergoes a conformational change leading to the sequential step‐wise closure of the three monomers. A previous atomic force microscopy study suggested that the conformational change might be due to a bending of extracellular loops over the pore opening, and loop deletion experiments suggested that loops L1, L7, and L8 are involved. In order to test the hypothesis for loop movement, we engineered a series of double cysteine mutants in loops L1, L6, L7 and L8 in order to create disulfide bonds linking two loops to each other, or the two branches of a loop, or a loop to the β‐barrel. Five out of the six mutants showed the formation of the disulfide bond. However, none of these had an altered response to acidic pH relative to the wildtype channel. Although we cannot dismiss the possibility that the mobility restriction introduced by each disulfide bond was too localized to impact a more global conformational change of the three loops, the fact that all of the different types of disulfide bond tethering were similarly ineffective suggests that the extracellular loops L1, L7, and L8 may not undergo a major acidic‐pH induced conformational change leading to channel closure. Proteins 2010. © 2010 Wiley‐Liss, Inc.     

The fourth extracellular loop of the alpha subunit of Na,K-ATPase. Functional evidence for close proximity with the second extracellular loop

Na,K-ATPase is the main active transport system that maintains the large gradients of Na(+) and K(+) across the plasma membrane of animal cells. The crystal structure of a K(+)-occluding conformation of this protein has been recently published, but the movements of its different domains allowing for the cation pumping mechanism are not yet known. The structure of many more conformations is known for the related calcium ATPase SERCA, but the reliability of homology modeling is poor for several domains with low sequence identity, in particular the extracellular loops. To better define the structure of the large fourth extracellular loop between the seventh and eighth transmembrane segments of the alpha subunit, we have studied the formation of a disulfide bond between pairs of cysteine residues introduced by site-directed mutagenesis in the second and the fourth extracellular loop. We found a specific pair of cysteine positions (Y308C and D884C) for which extracellular treatment with an oxidizing agent inhibited the Na,K pump function, which could be rapidly restored by a reducing agent. The formation of the disulfide bond occurred preferentially under the E2-P conformation of Na,K-ATPase, in the absence of extracellular cations. Using recently published crystal structure and a distance constraint reproducing the existence of disulfide bond, we performed an extensive conformational space search using simulated annealing and showed that the Tyr(308) and Asp(884) residues can be in close proximity, and simultaneously, the SYGQ motif of the fourth extracellular loop, known to interact with the extracellular domain of the beta subunit, can be exposed to the exterior of the protein and can easily interact with the beta subunit.