Complete maps of IS1, IS2, IS3, IS4, IS5, IS30 and IS150 locations in Escherichia coli K12

Summary In this paper complete distribution maps are presented of the seven IS elements 1, 2, 3, 4, 5, 30 and 150. These maps were obtained during the construction of an almost complete restriction map of the Escherichia coli genome of K12 strain BHB2600. The positions of IS elements were correlated to this map. The distribution of integration sites of all IS types is nonrandom. Besides a large gap from 79 min to 96 min, there is a pronounced IS cluster at 6 min and another at 97 min, map locations that have low gene incidences on the classical map. One cluster coincides with a region of IS induced rearrangements. The IS distribution pattern was compared to patterns of strains W3110 and HB101.     

IS200/IS605 family single-strand transposition: mechanism of IS608 strand transfer

Transposase, TnpA, of the IS200/IS605 family member IS608, catalyses single-strand DNA transposition and is dimeric with hybrid catalytic sites composed of an HUH motif from one monomer and a catalytic Y127 present in an α-helix (αD) from the other (trans configuration). αD is attached to the main body by a flexible loop. Although the reactions leading to excision of a transposition intermediate are well characterized, little is known about the dynamic behaviour of the transpososome that drives this process. We provide evidence strongly supporting a strand transfer model involving rotation of both αD helices from the trans to the cis configuration (HUH and Y residues from the same monomer). Studies with TnpA heterodimers suggest that TnpA cleaves DNA in the trans configuration, and that the catalytic tyrosines linked to the 5′-phosphates exchange positions to allow rejoining of the cleaved strands (strand transfer) in the cis configuration. They further imply that, after excision of the transposon junction, TnpA should be reset to a trans configuration before the cleavage required for integration. Analysis also suggests that this mechanism is conserved among members of the IS200/IS605 family.     

The isolation of IS1 and IS2 DNA

Summary DNA of the IS-elements IS1 and IS2 was prepared by digestion of appropriate heteroduplex molecules with endonuclease S1, followed by sucrose gradient centrifugation or gel electrophoresis. The material obtained is homogeneous with regard to size. The length of IS1 DNA is 820±65 nucleotides, the length of IS2 DNA is 1.350±70 nucleotides. IS1 DNA is not cleaved by the restriction endonucleases Eco R1, Hind II or Hind III. IS2 DNA is cleaved once by each of the two latter enzymes. The buoyant density determined by equilibrium centrifugation of Hg-complexes in Cs₂SO₄ corresponds to a GC content of approximately 50%. Labelling with polynucleotide kinase indicates that both IS DNA's have a guanosyl residue at both of their 5-termini.     

The role of tandem IS dimers in IS911 transposition

Using a combined in vivo and in vitro approach, we demonstrated that the transposition products generated by IS911 from a dimeric donor plasmid are different from those generated from a plasmid monomer. When carried by a monomeric plasmid donor, free IS911 transposon circles are generated by intra-IS recombination in which one IS end undergoes attack by the other. These represent transposition intermediates that undergo integration using the abutted left (IRL) and right (IRR) ends of the element, the active IRR-IRL junction, to generate simple insertions. In contrast, the two IS911 copies carried by a dimeric donor plasmid not only underwent intra-IS recombination to generate transposon circles but additionally participated in inter-IS recombination. This also creates an active IRR-IRL junction by generating a head-to-tail IS tandem dimer ([IS]2) in which one of the original plasmid backbone copies is eliminated in the formation of the junction. Both transposon circles and IS tandem dimers are generated from an intermediate in which two transposon ends are retained by a single strand joint to generate a figure 8 molecule. Inter-IS figure 8 molecules generated in vitro could be resolved into the [IS]2 form following introduction into a host strain by transformation. Resolution did not require IS911 transposase. The [IS]2 structure was stable in the absence of transposase but was highly unstable in its presence both in vivo and in vitro. Previous studies had demonstrated that the IRR-IRL junction promotes efficient intermolecular integration and intramolecular deletions both in vivo and in vitro. Integration of the [IS]2 derivative would result in a product that resembles a co-integrate structure. It is also shown here that the IRR-IRL junction of the [IS]2 form and derivative structures can specifically target one of the other ends in an intramolecular transposition reaction to generate transposon circles in vitro. These results not only demonstrate that IS911 (and presumably other members of the IS3 family) is capable of generating a range of transposition products, it also provides a mechanistic framework which explains the formation and activity of such structures previously observed for several other unrelated IS elements. This behaviour is probably characteristic of a large number of IS elements.     

Metapopulation(复合种群)究竟是什么?

Ｍｅｔａｐｏｐｕｌａｔｉｏｎ是种群生态学、景观生态学和保护生物学诸领域中的一个重要概念,近年来,有关ｍｅｔａｐｕｌａｔｉｏｎ的中文文章频率地出现在生态学杂志和书籍中。这一现象很好地反映了国内外华人生态学者对有关ｍｅｔａｐｏｐｕｌａｔｉｏｎ的问题愈来愈感兴趣,但对同一英文词出现的多种中文译法不免给诸造成了一些概念上的混乱,同时似乎也反映了作者们对ｍｅｔａｐｏｐｕｌａｔｉｏｎ这一概念在理解上的差异,因     

IS2-61 and IS2-611 arise by illegitimate recombination from IS2-6

Summary A more stable derivative of IS2-6 has been isolated, which had lost 54 bp of the 108 bp long insert characteristic of IS2-6. This new allele of IS2, IS2-61, segregates the remaining 54 bp to yield allele IS2-611. DNA sequence analysis shows that the segregation products of IS2-6 arise by recA-independent, illegitimate recombination at 9 bp long direct sequence repetitions.     

Orientation of IS50 transposase gene and IS50 transposition.

Reversal of transposase gene orientation with respect to the nonidentical ends of IS50 strongly decreased IS50 transposition in both Dam- and Dam+ hosts. In either orientation, IS50 transposase expression was unaffected. These effects were independent of the surrounding DNA context. This shows that the efficiency of IS50 transposition is dependent on transposase gene orientation. The transposition frequencies of transposons utilizing inverted IS50 inside ends (IE), IE-IE transposons, were lower than either outside end (OE)-IE or OE-OE transposons.     

IS861, a group B streptococcal insertion sequence related to IS150 and IS3 of Escherichia coli.

A 1,442-base-pair (bp) insertion sequence (IS861) was identified in the type III group B streptococcal (GBS) strain COH-1. It is flanked by 26-bp imperfect inverted repeats and contains two open reading frames, 1 and 2, encoding 141- and 277-amino-acid proteins, respectively. A 3-bp target sequence, ACA, is duplicated and flanks each inverted repeat. IS861 shares greater than 30% homology with IS3 and IS150 of Escherichia coli, primarily in the region of their putative transposases. Northern (RNA) analysis revealed that RNA is actively transcribed in vivo by IS861 and 17- and 36-kilodalton proteins were synthesized in E. coli maxicell assays. Multiple copies of IS861 were observed throughout the chromosome of COH-1, and one of the copies is located near genes involved in GBS capsule synthesis. IS861 is the first insertion sequence identified in GBS. Its role in GBS and the significance of its relationship to the phylogenetically similar insertion sequences typified by IS150 and IS3 of E. coli are unknown.     

The novel insertion sequences IS1417, IS1418, and IS1419 from Burkholderia glumae and their strain distribution

Three insertion sequences, IS1417, IS1418, and IS1419, were isolated from Burkholderia glumae (formerly Pseudomonas glumae), a gram-negative rice pathogenic bacterium, on the basis of their abilities to activate the expression of the neo gene of the entrap vector pSHI1063. The 1335-bp IS1417 element with 17-bp imperfect terminal inverted repeats was found to be flanked by 5-bp direct repeats of the vector sequence. IS1418 is 865 bp in length and carries 15-bp inverted repeats with a target duplication of 3 bp. The 1215-bp IS1419 sequence is bounded by the 36-bp terminal inverted repeats of the element and 7-bp direct repeats of the vector sequence. IS1417 and IS1418 belong to the IS2 subgroup of the IS3 family and the IS427 subgroup of the IS5 family, respectively, whereas IS1419 does not appear to be a member of any known IS family. Southern blot analysis of DNAs from B. glumae field isolates indicated that those IS elements are widely distributed, but the host range of the three IS elements appears to be limited to B. glumae and some other related species such as B. plantarii. The polymorphisms exhibited in B. glumae isolates suggest that those elements are useful for molecular epidemiological studies of B. glumae infections.     

Cloning and sequencing of IS1086, an Alcaligenes eutrophus insertion element related to IS30 and IS4351.

A new insertion sequence (IS), designated IS1086, was isolated from Alcaligenes eutrophus CH34 by being trapped in plasmid pJV240, which contains the Bacillus subtilis sacB and sacR genes. The 1,106-bp IS1086 element contains partially matched (22 of 28 bp) terminal-inverted repeats and a long open reading frame. Hybridization data suggest the presence of one copy of IS1086 in the strain CH34 heavy-metal resistance plasmid pMOL28 and at least two copies in its chromosome. Analysis of the IS1086 nucleotide sequence revealed striking homology with two other IS elements, IS30 and IS4351, suggesting that they are three close members in a family of phylogenetically related insertion sequences. One open reading frame of the Spiroplasma citri phage SpV1-R8A2 B was also found to be related to this IS family but to a lesser extent. Comparison of the G+C contents of IS30 and IS1086 revealed that they conform to their respective hosts (46 versus 50% for IS30 and Escherichia coli and 64.5% for IS1086 and A. eutrophus). The pressure on the AT/GC ratio led to a very different codon usage in these two closely related IS elements. Results suggesting that IS1086 transposition might be activated by some forms of stress are discussed.     

Structural and Functional Characterization of IS679 and IS66-Family Elements

A new insertion sequence (IS) element, IS679 (2,704 bp in length), has been identified in plasmid pB171 of enteropathogenic Escherichia coli B171. IS679 has imperfect 25-bp terminal inverted repeats (IRs) and three open reading frames (ORFs) (here called tnpA, tnpB, and tnpC). A plasmid carrying a composite transposon (Tn679) with the kanamycin resistance gene flanked by an intact IS679 sequence and an IS679 fragment with only IRR (IR on the right) was constructed to clarify the transposition activity of IS679. A transposition assay done with a mating system showed that Tn679 could transpose at a high frequency to the F plasmid derivative used as the target. On transposition, Tn679 duplicated an 8-bp sequence at the target site. Tn679 derivatives with a deletion in each ORF of IS679 did not transpose, finding indicative that all three IS679 ORFs are essential for transposition. The tnpA and tnpC products appear to have the amino acid sequence motif characteristic of most transposases. A homology search of the databases found that a total of 25 elements homologous to IS679 are present in Agrobacterium, Escherichia, Rhizobium, Pseudomonas, and Vibrio spp., providing evidence that the elements are widespread in gram-negative bacteria. We found that these elements belong to the IS66 family, as do other elements, including nine not previously reported. Almost all of the elements have IRs similar to those in IS679 and, like IS679, most appear to have duplicated an 8-bp sequence at the target site on transposition. These elements have three ORFs corresponding to those in IS679, but many have a mutation(s) in an ORF(s). In almost all of the elements, tnpB is located in the -1 frame relative to tnpA, such that the initiation codon of tnpB overlaps the TGA termination codon of tnpA. In contrast, tnpC, separated from tnpB by a space of ca. 20 bp, is located in any one of three frames relative to tnpB. No common structural features were found around the intergenic regions, indicating that the three ORFs are expressed by translational coupling but not by translational frameshifting.     

Distribution of the IS elements ISS1 and IS904 in lactococci

A broad distribution of the lactococcal IS elements ISS1 [1] and IS904 [2] in several lactococcal plasmids and chromosomal DNA was observed. Hybridization of the ISS1 and IS904 oligonucleotide gene probes with DNA of lactococcal phages showed that none of these tested bacteriophages contained one of the IS elements. On the transductionally shortened lactose plasmid pTD1 an insertion sequence homologous to ISS1 was identified closely downstream to the P-beta-galactosidase gene. Sequence analysis of ISS1/pTD1 showed 82% homology in the deduced amino acid sequence to the putative transposase of ISS1, ISS1W, ISS1N, and IS946.