The Kil Peptide of Bacteriophage λ Blocks Escherichia coli Cytokinesis via ZipA-Dependent Inhibition of FtsZ Assembly

Assembly of the essential, tubulin-like FtsZ protein into a ring-shaped structure at the nascent division site determines the timing and position of cytokinesis in most bacteria and serves as a scaffold for recruitment of the cell division machinery. Here we report that expression of bacteriophage λ kil, either from a resident phage or from a plasmid, induces filamentation of Escherichia coli cells by rapid inhibition of FtsZ ring formation. Mutant alleles of ftsZ resistant to the Kil protein map to the FtsZ polymer subunit interface, stabilize FtsZ ring assembly, and confer increased resistance to endogenous FtsZ inhibitors, consistent with Kil inhibiting FtsZ assembly. Cells with the normally essential cell division gene zipA deleted (in a modified background) display normal FtsZ rings after kil expression, suggesting that ZipA is required for Kil-mediated inhibition of FtsZ rings in vivo. In support of this model, point mutations in the C-terminal FtsZ-interaction domain of ZipA abrogate Kil activity without discernibly altering FtsZ-ZipA interactions. An affinity-tagged-Kil derivative interacts with both FtsZ and ZipA, and inhibits sedimentation of FtsZ filament bundles in vitro. Together, these data inspire a model in which Kil interacts with FtsZ and ZipA in the cell to prevent FtsZ assembly into a coherent, division-competent ring structure. Phage growth assays show that kil⁺ phage lyse ∼30% later than kil mutant phage, suggesting that Kil delays lysis, perhaps via its interaction with FtsZ and ZipA.     

The division inhibitor EzrA contains a seven-residue patch required for maintaining the dynamic nature of the medial FtsZ ring

The essential cytoskeletal protein FtsZ assembles into a ring-like structure at the nascent division site and serves as a scaffold for the assembly of the prokaryotic division machinery. We previously characterized EzrA as an inhibitor of FtsZ assembly in Bacillus subtilis. EzrA interacts directly with FtsZ to prevent aberrant FtsZ assembly and cytokinesis at cell poles. EzrA also concentrates at the cytokinetic ring in an FtsZ-dependent manner, although its precise role at this position is not known. Here, we identified a conserved patch of amino acids in the EzrA C terminus that is essential for localization to the FtsZ ring. Mutations in this patch (designated the “QNR patch”) abolish EzrA localization to midcell but do not significantly affect EzrA's ability to inhibit FtsZ assembly at cell poles. ezrA QNR patch mutant cells exhibit stabilized FtsZ assembly at midcell and are significantly longer than wild-type cells, despite lacking extra FtsZ rings. These results indicate that EzrA has two distinct activities in vivo: (i) preventing aberrant FtsZ ring formation at cell poles through inhibition of de novo FtsZ assembly and (ii) maintaining proper FtsZ assembly dynamics within the medial FtsZ ring, thereby rendering it sensitive to the factors responsible for coordinating cell growth and cell division.     

3D-SIM Super-resolution of FtsZ and Its Membrane Tethers in Escherichia coli Cells

FtsZ, a bacterial homolog of eukaryotic tubulin, assembles into the Z ring required for cytokinesis. In Escherichia coli, FtsZ interacts directly with FtsA and ZipA, which tether the Z ring to the membrane. We used three-dimensional structured illumination microscopy to compare the localization patterns of FtsZ, FtsA, and ZipA at high resolution in Escherichia coli cells. We found that FtsZ localizes in patches within a ring structure, similar to the pattern observed in other species, and discovered that FtsA and ZipA mostly colocalize in similar patches. Finally, we observed similar punctate and short polymeric structures of FtsZ distributed throughout the cell after Z rings were disassembled, either as a consequence of normal cytokinesis or upon induction of an endogenous cell division inhibitor.The assembly of the bacterial tubulin FtsZ has been well studied in vitro, but the fine structure of the cytokinetic Z ring it forms in vivo is not well defined. Super-resolution microscopy methods including photoactivated localization microscopy (PALM) and three-dimensional-structured illumination microscopy (3D-SIM) have recently provided a more detailed view of Z-ring structures. Two-dimensional PALM showed that Z rings in Escherichia coli are likely composed of loosely-bundled dynamic protofilaments (1,2). Three-dimensional PALM studies of Caulobacter crescentus initially showed that Z rings were comprised of loosely bundled protofilaments forming a continuous but dynamic ring (1–3). However, a more recent high-throughput study showed that the Z rings of this bacterium are patchy or discontinuous (4), similar to Z rings of Bacillus subtilis and Staphylococcus aureus using 3D-SIM (5). Strauss et al. (5) also demonstrated that the patches in B. subtilis Z rings are highly dynamic.Assembly of the Z ring is modulated by several proteins that interact directly with FtsZ and enhance assembly or disassembly (6). For example, FtsA and ZipA promote ring assembly in E. coli by tethering it to the cytoplasmic membrane (7,8). SulA is an inhibitor of FtsZ assembly, induced only after DNA damage, which sequesters monomers of FtsZ to prevent its assembly into a Z ring (9). Our initial goals were to visualize Z rings in E. coli using 3D-SIM, and then examine whether any FtsZ polymeric structures remain after SulA induction. We also asked whether FtsA and ZipA localized in patchy patterns similar to those of FtsZ.We used a DeltaVision OMX V4 Blaze microscope (Applied Precision, GE Healthcare, Issaquah, WA) to view the high-resolution localization patterns of FtsZ in E. coli cells producing FtsZ-GFP (Fig. 1). Three-dimensional views were reconstructed using softWoRx software (Applied Precision). To rule out GFP artifacts, we also visualized native FtsZ from a wild-type strain (WM1074) by immunofluorescence (IF).Open in a separate windowFigure 1Localization of FtsZ in E. coli. (A) Cell with a Z ring labeled with FtsZ-GFP. (B) Rotated view of Z ring in panel A. (C) Cell with a Z ring labeled with DyLight 550 (Thermo Fisher Scientific, Waltham, MA). (D) Rotated view of Z ring in panel C. (B1 and D1) Three-dimensional surface intensity plots of Z rings in panels B and D, respectively. (E) A dividing cell producing FtsZ-GFP. The cell outline is shown in the schematic. (Asterisk) Focus of FtsZ localization; (open dashed ovals) filamentous structures of FtsZ. Three-dimensional surface intensity plots were created using the software ImageJ (19). Scale bars, 1 μm.Both FtsZ-GFP (Fig. 1, A, B, and B1) and IF staining for FtsZ (Fig. 1, C, D, and D1) consistently localized to patches around the ring circumference, similar to the B. subtilis and C. crescentus FtsZ patterns (4,5). Analysis of fluorescence intensities (see Fig. S1, A and B, in the Supporting Material) revealed that the majority of Z rings contain one or more gaps in which intensity decreases to background levels (82% for FtsZ-GFP and 69% for IF). Most rings had 3–5 areas of lower intensity, but only a small percentage of these areas had fluorescence below background intensity (34% for FtsZ-GFP and 21% for IF), indicating that the majority of areas with lower intensity contain at least some FtsZ.To elucidate how FtsZ transitions from a disassembled ring to a new ring, we imaged a few dividing daughter cells before they were able to form new Z rings (Fig. 1 E). Previous conventional microscopy had revealed dynamic FtsZ helical structures (10), but the resolution had been insufficient to see further details. Here, FtsZ visualized in dividing cells by 3D-SIM localized throughout as a mixture of patches and randomly-oriented short filaments (asterisk and dashed oval in Fig. 1, respectively). These structures may represent oligomeric precursors of Z ring assembly.To visualize FtsZ after Z-ring disassembly another way, we overproduced SulA, a protein that blocks FtsZ assembly. We examined E. coli cells producing FtsZ-GFP after induction of sulA expression from a pBAD33-sulA plasmid (pWM1736) with 0.2% arabinose. After 30 min of sulA induction, Z rings remained intact in most cells (Fig. 2 A and data not shown). The proportion of cellular FtsZ-GFP in the ring before and after induction of sulA was consistent with previous data (data not shown) (1,11).Open in a separate windowFigure 2Localization of FtsZ after overproduction of SulA. (A) Cell producing FtsZ-GFP after 0.2% arabinose induction of SulA for 30 min. (B) After 45 min. (B1) Magnified cell shown in panel B. (C) Cell producing native FtsZ labeled with AlexaFluor 488 (Life Technologies, Carlsbad, CA) 30 min after induction; (D) 45 min after induction. (D1) Magnified cell shown in panel D. Scale bars, 1 μm. (Asterisk) Focus of FtsZ localization; (open dashed ovals) filamentous structures of FtsZ.Notably, after 45 min of sulA induction, Z rings were gone (Fig. 2, B and B1), replaced by numerous patches and randomly-oriented short filaments (asterisk and dashed ovals in Fig. 2), similar to those observed in a dividing cell. FtsZ normally rapidly recycles from free monomers to ring-bound polymers (11), but a critical concentration of SulA reduces the pool of available FtsZ monomers, resulting in breakdown of the Z ring (9). The observed FtsZ-GFP patches and filaments are likely FtsZ polymers that disassemble before they can organize into a ring.We confirmed this result by overproducing SulA in wild-type cells and detecting FtsZ localization by IF (Fig. 2, C, D, and D1). The overall fluorescence patterns in cells producing FtsZ-GFP versus cells producing only native FtsZ were similar (Fig. 2, B1 and D1), although we observed fewer filaments with IF, perhaps because FtsZ-GFP confers slight resistance to SulA, or because the increased amount of FtsZ in FtsZ-GFP producing cells might titrate the SulA more effectively.Additionally, we wanted to observe the localization patterns of the membrane tethers FtsA and ZipA. Inasmuch as both proteins bind to the same C-terminal conserved tail of FtsZ (12–14), they would be expected to colocalize with the circumferential FtsZ patches in the Z ring. We visualized FtsA using protein fusions to mCherry and GFP (data not shown) as well as IF using a wild-type strain (WM1074) (Fig. 3 A). We found that the patchy ring pattern of FtsA localization was similar to the FtsZ pattern. ZipA also displayed a similar patchy localization in WM1074 by IF (Fig. 3 B).Open in a separate windowFigure 3Localization of FtsA (A) and ZipA (B) by IF using AlexaFluor 488. (C) FtsA-GFP ring. (D) Same cell shown in panel C with ZipA labeled with DyLight 550. (C1 and D1) Three-dimensional surface intensity plots of FtsA ring from panel C or ZipA ring from panel D, respectively. (E) Merged image of FtsA (green) and ZipA (red) from the ring shown in panels C and D. (F) Intensity plot of FtsA (green) and ZipA (red) of ring shown in panel E. The plot represents intensity across a line drawn counterclockwise from the top of the ring around the circumference, then into its lumen. Red/green intensity plot and three-dimensional surface intensity plots were created using the software ImageJ (19). Scale bar, 1 μm.To determine whether FtsA and ZipA colocalized to these patches, we used a strain producing FtsA-GFP (WM4679) for IF staining of ZipA using a red secondary antibody. FtsA-GFP (Fig. 3 C) and ZipA (Fig. 3 D) had similar patterns of fluorescence, although the three-dimensional intensity profiles (Fig. 3, C1 and D1) reveal slight differences in intensity that are also visible in a merged image (Fig. 3 E). Quantitation of fluorescence intensities around the circumference of the rings revealed that FtsA and ZipA colocalized almost completely in approximately half of the rings analyzed (Fig. 3 F, and see Fig. S2 A), whereas in the other rings there were significant differences in localization in one or more areas (see Fig. S2 B). FtsA and ZipA bind to the same C-terminal peptide of FtsZ and may compete for binding. Cooperative self-assembly of FtsA or ZipA might result in large-scale differential localization visible by 3D-SIM.In conclusion, our 3D-SIM analysis shows that the patchy localization of FtsZ is conserved in E. coli and suggests that it may be widespread among bacteria. After disassembly of the Z ring either in dividing cells or by excess levels of the cell division inhibitor SulA, FtsZ persisted as patches and short filamentous structures. This is consistent with a highly dynamic population of FtsZ monomers and oligomers outside the ring, originally observed as mobile helices in E. coli by conventional fluorescence microscopy (10) and by photoactivation single-molecule tracking (15). FtsA and ZipA, which bind to the same segment of FtsZ and tether it to the cytoplasmic membrane, usually display a similar localization pattern to FtsZ and each other, although in addition to the differences we detect by 3D-SIM, there are also likely differences that are beyond its ∼100-nm resolution limit in the X,Y plane.As proposed previously (16), gaps between FtsZ patches may be needed to accommodate a switch from a sparse Z ring to a more condensed ring, which would provide force to drive ring constriction (17). If this model is correct, the gaps should close upon ring constriction, although this may be beyond the resolution of 3D-SIM in constricted rings. Another role for patches could be to force molecular crowding of low-abundance septum synthesis proteins such as FtsI, which depend on FtsZ/FtsA/ZipA for their recruitment, into a few mobile supercomplexes.How are FtsZ polymers organized within the Z-ring patches? Recent polarized fluorescence data suggest that FtsZ polymers are oriented both axially and circumferentially within the Z ring in E. coli (18). The seemingly random orientation of the non-ring FtsZ polymeric structures we observe here supports the idea that there is no strong constraint requiring FtsZ oligomers to follow a circumferential path around the cell cylinder. The patches of FtsZ in the unperturbed E. coli Z ring likely represent randomly oriented clusters of FtsZ filaments that are associated with ZipA, FtsA, and essential septum synthesis proteins. New super-resolution microscopy methods should continue to shed light on the in vivo organization of these protein assemblies.     

MULTIPLE FtsZ RING FORMATION AND REDUPLICATED CHLOROPLAST DNA IN NANNOCHLORIS BACILLARIS (CHLOROPHYTA,TREBOUXIOPHYCEAE) UNDER PHOSPHATE‐ENRICHED CULTURE1

We examined the effects of phosphate enrichment on chloroplasts of the unicellular green alga Nannochloris bacillaris Naumann. The doubling time of cells was similar in phosphate‐limited (no β‐glycerophosphate) and phosphate‐enriched (2 mM β‐glycerophosphate) media. The lengths of cells and chloroplasts were similar, regardless of phosphate concentration. The relationship between the ring formation of the prokaryote‐derived chloroplast division protein FtsZ and phosphate concentration was examined using indirect fluorescent antibody staining. The number of FtsZ rings increased as the phosphate concentration of the medium increased. Multiple FtsZ rings were formed in cells in phosphate‐enriched medium; up to six FtsZ rings per chloroplast were observed. The number of FtsZ rings increased as the chloroplast grew. The FtsZ ring located near the center of the chloroplast had the strongest fluorescence. The FtsZ ring at the relative center of all FtsZ rings was used for division. Plastid division rings did not multiply in phosphate‐enriched culture. The chloroplast DNA content was 2.3 times greater in phosphate‐enriched than in phosphate‐limited culture and decreased in cells cultured in phosphate‐enriched medium containing 5‐fluorodeoxyuridine (FdUr). In the presence of FdUr, only one FtsZ ring formed, even under phosphate enrichment. This finding suggests that excessive chloroplast DNA replication induces multiple FtsZ ring formation in phosphate‐enriched culture. We propose a multiple FtsZ ring formation model under phosphate enrichment.     

ROLE OF MULTIPLE FTSZ RINGS IN CHLOROPLAST DIVISION UNDER OLIGOTROPHIC AND EUTROPHIC CONDITIONS IN THE UNICELLULAR GREEN ALGA NANNOCHLORIS BACILLARIS (CHLOROPHYTA,TREBOUXIOPHYCEAE)1

Chloroplasts of the unicellular green alga Nannochloris bacillaris Naumann cultured under nutrient‐enriched conditions have multiple rings of FtsZ, a prokaryote‐derived chloroplast division protein. We previously reported that synthesis of excess chloroplast DNA and formation of multiple FtsZ rings occur simultaneously. To clarify the role of multiple FtsZ rings in chloroplast division, we investigated chloroplast DNA synthesis and ring formation in cells cultured under various culture conditions. Cells transferred from a nutrient‐enriched medium to an inorganic medium in the light showed a drop in cell division rate, a reduction in chloroplast DNA content, and changes in the shape of chloroplast nucleoids as cells divided. We then examined DNA synthesis by immunodetecting BrdU incorporated into DNA strands using the anti‐BrdU antibody. BrdU‐labeled nuclei were clearly observed in cells 48 h after transfer into the inorganic medium, while only weak punctate signals were visible in the chloroplasts. In parallel, the number of FtsZ rings decreased from 6 to only 1. When the cells were transferred from an inorganic medium to a nutrient‐enriched medium, the number of cells increased only slightly in the first 12 h after transfer; after this time, however, they started to divide more quickly and increased exponentially. Chloroplast nucleoids changed from punctate to rod‐like structures, and active chloroplast DNA synthesis and FtsZ ring formation were observed. On the basis of our results, we conclude that multiple FtsZ ring assembly and chloroplast DNA duplication under nutrient‐rich conditions facilitate chloroplast division after transfer to oligotrophic conditions without further duplication of chloroplast DNA and formation of new FtsZ rings.     

Isolation of Candida glabrata Homologs of the Saccharomyces cerevisiae KRE9 and KNH1 Genes and Their Involvement in Cell Wall β-1,6-Glucan Synthesis

The Candida glabrata KRE9 (CgKRE9) and KNH1 (CgKNH1) genes have been isolated as multicopy suppressors of the tetracycline-sensitive growth of a Saccharomyces cerevisiae mutant with the disrupted KNH1 locus and the KRE9 gene placed under the control of a tetracycline-responsive promoter. Although a cgknh1Δ mutant showed no phenotype beyond slightly increased sensitivity to the K1 killer toxin, disruption of CgKRE9 resulted in several phenotypes similar to those of the S. cerevisiae kre9Δ null mutant: a severe growth defect on glucose medium, resistance to the K1 killer toxin, a 50% reduction of β-1,6-glucan, and the presence of aggregates of cells with abnormal morphology on glucose medium. Replacement in C. glabrata of the cognate CgKRE9 promoter with the tetracycline-responsive promoter in a cgknh1Δ background rendered cell growth tetracycline sensitive on media containing glucose or galactose. cgkre9Δ cells were shown to be sensitive to calcofluor white specifically on glucose medium. In cgkre9 mutants grown on glucose medium, cellular chitin levels were massively increased.     

Recruitment of ZipA to the Septal Ring of Escherichia coli Is Dependent on FtsZ and Independent of FtsA

Cell division in prokaryotes is mediated by the septal ring. In Escherichia coli, this organelle consists of several essential division proteins, including FtsZ, FtsA, and ZipA. To gain more insight into how the structure is assembled, we studied the interdependence of FtsZ, FtsA, and ZipA localization using both immunofluorescence and Gfp tagging techniques. To this end, we constructed a set of strains allowing us to determine the cellular location of each of these three proteins in cells from which one of the other two had been specifically depleted. Our results show that ZipA fails to accumulate in a ring shape in the absence of FtsZ. Conversely, depletion of ZipA does not abolish formation of FtsZ rings but leads to a significant reduction in the number of rings per unit of cell mass. In addition, ZipA does not appear to require FtsA for assembly into the septal ring and vice versa. It is suggested that septal ring formation starts by assembly of the FtsZ ring, after which ZipA and FtsA join this structure in a mutually independent fashion through direct interactions with the FtsZ protein.     

Biosurfactant Production and Surface Translocation Are Regulated by PlcR in Bacillus cereus ATCC 14579 under Low-Nutrient Conditions

Bacillus cereus ATCC 14579 can respond to nutrient changes by adopting different forms of surface translocation. The B. cereus ATCC 14579 ΔplcR mutant, but not the wild type, formed dendritic (branched) patterns on EPS [a low-nutrient medium that contains 7.0 g K₂HPO₄, 3.0 g KH₂PO₄, 0.1 g MgSO₄·7H₂O, 0.1 g (NH₄)₂SO₄, 0.01 g CaCl₂, 0.001 g FeSO₄, 0.1 g NaCl, 1.0 g glucose, and 125 mg yeast extract per liter] containing 0.7% agar. The dendritic patterns formed by sliding translocation of nonflagellated cells are enhanced under low-nutrient conditions and require sufficient production of a biosurfactant, which appears to be repressed by PlcR. The wild-type and complemented strains failed to slide on the surface of EPS agar because of the production of low levels of biosurfactant. Precoating EPS agar surfaces with surfactin (a biosurfactant produced by Bacillus subtilis) or biosurfactant purified from the ΔplcR mutant rescued the ability of the wild-type and complemented strains to slide. When grown on a nutrient-rich medium like Luria-Bertani agar, both the wild-type and ΔplcR mutant strains produced flagella. The wild type was hyperflagellated and elongated and exhibited swarming behavior, while the ΔplcR mutant was multiflagellated and the cells often formed long chains but did not swarm. Thin-layer chromatography and mass spectrometry analyses suggested that the biosurfactant purified from the ΔplcR mutant was a lipopeptide and had a mass of 1,278.1722 (m/z). This biosurfactant has hemolytic activity and inhibited the growth of several gram-positive bacteria.     

Isolation and Characterization of Toluene-Sensitive Mutants from the Toluene-Resistant Bacterium Pseudomonas putida GM73

To understand the mechanism underlying toluene resistance of a toluene-tolerant bacterium, Pseudomonas putida GM73, we carried out Tn5 mutagenesis and isolated eight toluene-sensitive mutants. None of the mutants grew in the presence of 20% (vol/vol) toluene in growth medium but exhibited differential sensitivity to toluene. When wild-type cells were treated with toluene (1% [vol/vol]) for 5 min, about 2% of the cells could form colonies. In the mutants Ttg1, Ttg2, Ttg3, and Ttg8, the same treatment killed more than 99.9999% of cells (survival rate, <10⁻⁶). In Ttg4, Ttg5, Ttg6, and Ttg7, about 0.02% of cells formed colonies. We cloned the Tn5-inserted genes, and the DNA sequence flanking Tn5 was determined. From comparison with a sequence database, putative protein products encoded by ttg genes were identified as follows. Ttg1 and Ttg2 are ATP binding cassette (ABC) transporter homologs; Ttg3 is a periplasmic linker protein of a toluene efflux pump; both Ttg4 and Ttg7 are pyruvate dehydrogenase; Ttg5 is a dihydrolipoamide acetyltransferase; and Ttg7 is the negative regulator of the phosphate regulon. The sequences deduced from ttg8 did not show a significant similarity to any DNA or proteins in sequence databases. Characterization of these mutants and identification of mutant genes suggested that active efflux mechanism and efficient repair of damaged membranes were important in toluene resistance.     

Counting actin in contractile rings reveals novel contributions of cofilin and type II myosins to fission yeast cytokinesis

Cytokinesis by animals, fungi, and amoebas depends on actomyosin contractile rings, which are stabilized by continuous turnover of actin filaments. Remarkably little is known about the amount of polymerized actin in contractile rings, so we used low concentrations of GFP-Lifeact to count total polymerized actin molecules in the contractile rings of live fission yeast cells. Contractile rings of wild-type cells accumulated polymerized actin molecules at 4900/min to a peak number of ∼198,000 followed by a loss of actin at 5400/min throughout ring constriction. In adf1-M3 mutant cells with cofilin that severs actin filaments poorly, contractile rings accumulated polymerized actin at twice the normal rate and eventually had almost twofold more actin along with a proportional increase in type II myosins Myo2, Myp2, and formin Cdc12. Although 30% of adf1-M3 mutant cells failed to constrict their rings fully, the rest lost actin from the rings at the wild-type rates. Mutations of type II myosins Myo2 and Myp2 reduced contractile ring actin filaments by half and slowed the rate of actin loss from the rings.     

Heterologous Production of Dihomo-γ-Linolenic Acid in Saccharomyces cerevisiae

To make dihomo-γ-linolenic acid (DGLA) (20:3n-6) in Saccharomyces cerevisiae, we introduced Kluyveromyces lactis Δ12 fatty acid desaturase, rat Δ6 fatty acid desaturase, and rat elongase genes. Because Fad2p is able to convert the endogenous oleic acid to linoleic acid, this allowed DGLA biosynthesis without the need to supply exogenous fatty acids on the media. Medium composition, cultivation temperature, and incubation time were examined to improve the yield of DGLA. Fatty acid content was increased by changing the medium from a standard synthetic dropout medium to a nitrogen-limited minimal medium (NSD). Production of DGLA was higher in the cells grown at 15°C than in those grown at 20°C, and no DGLA production was observed in the cells grown at 30°C. In NSD at 15°C, fatty acid content increased up until day 7 and decreased after day 10. When the cells were grown in NSD for 7 days at 15°C, the yield of DGLA reached 2.19 μg/mg of cells (dry weight) and the composition of DGLA to total fatty acids was 2.74%. To our knowledge, this is the first report describing the production of polyunsaturated fatty acids in S. cerevisiae without supplying the exogenous fatty acids.     

Negative-stain electron microscopy of inside-out FtsZ rings reconstituted on artificial membrane tubules show ribbons of protofilaments

FtsZ, the primary cytoskeletal element of the Z ring, which constricts to divide bacteria, assembles into short, one-stranded filaments in vitro. These must be further assembled to make the Z ring in bacteria. Conventional electron microscopy (EM) has failed to image the Z ring or resolve its substructure. Here we describe a procedure that enabled us to image reconstructed, inside-out FtsZ rings by negative-stain EM, revealing the arrangement of filaments. We took advantage of a unique lipid that spontaneously forms 500 nm diameter tubules in solution. We optimized conditions for Z-ring assembly with fluorescence light microscopy and then prepared specimens for negative-stain EM. Reconstituted FtsZ rings, encircling the tubules, were clearly resolved. The rings appeared as ribbons of filaments packed side by side with virtually no space between neighboring filaments. The rings were separated by variable expanses of empty tubule as seen by light microscopy or EM. The width varied considerably from one ring to another, but each ring maintained a constant width around its circumference. The inside-out FtsZ rings moved back and forth along the tubules and exchanged subunits with solution, similarly to Z rings reconstituted outside or inside tubular liposomes. FtsZ from Escherichia coli and Mycobacterium tuberculosis assembled rings of similar structure, suggesting a universal structure across bacterial species. Previous models for the Z ring in bacteria have favored a structure of widely scattered filaments that are not in contact. The ribbon structure that we discovered here for reconstituted inside-out FtsZ rings provides what to our knowledge is new evidence that the Z ring in bacteria may involve lateral association of protofilaments.     

3D-SIM Super-resolution of FtsZ and Its Membrane Tethers in Escherichia coli Cells

FtsZ, a bacterial homolog of eukaryotic tubulin, assembles into the Z ring required for cytokinesis. In Escherichia coli, FtsZ interacts directly with FtsA and ZipA, which tether the Z ring to the membrane. We used three-dimensional structured illumination microscopy to compare the localization patterns of FtsZ, FtsA, and ZipA at high resolution in Escherichia coli cells. We found that FtsZ localizes in patches within a ring structure, similar to the pattern observed in other species, and discovered that FtsA and ZipA mostly colocalize in similar patches. Finally, we observed similar punctate and short polymeric structures of FtsZ distributed throughout the cell after Z rings were disassembled, either as a consequence of normal cytokinesis or upon induction of an endogenous cell division inhibitor.     

FtsZ ring clusters in min and partition mutants: role of both the Min system and the nucleoid in regulating FtsZ ring localization

To understand further the role of the nucleoid and the min system in selection of the cell division site, we examined FtsZ localization in Escherichia coli cells lacking MinCDE and in parC mutants defective in chromosome segregation. More than one FtsZ ring was sometimes found in the gaps between nucleoids in min mutant filaments. These multiple FtsZ rings were more apparent in longer cells; double or triple rings were often found in the nucleoid-free gaps in ftsI min and ftsA min double mutant filaments. Introducing a parC mutation into the ftsA min double mutant allowed the nucleoid-free gaps to become significantly longer. These gaps often contained dramatic clusters of FtsZ rings. In contrast, filaments of the ftsA parC double mutant, which contained active MinCDE, assembled only one or two rings in most of the large nucleoid-free gaps. These results suggest that all positions along the cell length are competent for FtsZ ring assembly, not just sites at mid-cell or at the poles. Consistent with previous results, unsegregated nucleoids also correlated with a lack of FtsZ localization. A model is proposed in which both the inhibitory effect of the nucleoid and the regulation by MinCDE ensure that cells divide precisely at the midpoint.     

Mathematical model for positioning the FtsZ contractile ring in Escherichia coli

During bacterial cytokinesis, a proteinaceous contractile ring assembles in the cell middle. The Z ring tethers to the membrane and contracts, when triggered, to form two identical daughter cells. One mechanism for positioning the ring involves the MinC, MinD and MinE proteins, which oscillate between cell poles to inhibit ring assembly. Averaged over time, the concentration of the inhibitor MinC is lowest at midcell, restricting ring assembly to this region. A second positioning mechanism, called Nucleoid Occlusion, acts through protein SlmA to inhibit ring polymerization in the location of the nucleoid. Here, a mathematical model was developed to explore the interactions between Min oscillations, nucleoid occlusion, Z ring assembly and positioning. One-dimensional advection-reaction-diffusion equations were built to simulate the spatio-temporal concentrations of Min proteins and their effect on various forms of FtsZ. The resulting partial differential equations were numerically solved using a finite volume method. The reduced chemical model assumed that the ring is composed of overlapping FtsZ filaments and that MinC disrupts lateral interactions between filaments. SlmA was presumed to break long FtsZ filaments into shorter units. A term was developed to account for the movement of FtsZ subunits in membrane-bound filaments as they touch and align with other filaments. This alignment was critical in forming sharp stable rings. Simulations qualitatively reproduced experimental results showing the incorrect positioning of rings when Min proteins were not expressed, and the formation of multiple rings when FtsZ was overexpressed.     

Chloroplast Division Protein ARC3 Regulates Chloroplast FtsZ-Ring Assembly and Positioning in Arabidopsis through Interaction with FtsZ2

Chloroplast division is initiated by assembly of a mid-chloroplast FtsZ (Z) ring comprising two cytoskeletal proteins, FtsZ1 and FtsZ2. The division-site regulators ACCUMULATION AND REPLICATION OF CHLOROPLASTS3 (ARC3), MinD1, and MinE1 restrict division to the mid-plastid, but their roles are poorly understood. Using genetic analyses in Arabidopsis thaliana, we show that ARC3 mediates division-site placement by inhibiting Z-ring assembly, and MinD1 and MinE1 function through ARC3. ftsZ1 null mutants exhibited some mid-plastid FtsZ2 rings and constrictions, whereas neither constrictions nor FtsZ1 rings were observed in mutants lacking FtsZ2, suggesting FtsZ2 is the primary determinant of Z-ring assembly in vivo. arc3 ftsZ1 double mutants exhibited multiple parallel but no mid-plastid FtsZ2 rings, resembling the Z-ring phenotype in arc3 single mutants and showing that ARC3 affects positioning of FtsZ2 rings as well as Z rings. ARC3 overexpression in the wild type and ftsZ1 inhibited Z-ring and FtsZ2-ring assembly, respectively. Consistent with its effects in vivo, ARC3 interacted with FtsZ2 in two-hybrid assays and inhibited FtsZ2 assembly in a heterologous system. Our studies are consistent with a model wherein ARC3 directly inhibits Z-ring assembly in vivo primarily through interaction with FtsZ2 in heteropolymers and suggest that ARC3 activity is spatially regulated by MinD1 and MinE1 to permit Z-ring assembly at the mid-plastid.     

Physiological Role of β-Phosphoglucomutase in Lactococcus lactis

A β-phosphoglucomutase (β-PGM) mutant of Lactococcus lactis subsp. lactis ATCC 19435 was constructed using a minimal integration vector and double-crossover recombination. The mutant and the wild-type strain were grown under controlled conditions with different sugars to elucidate the role of β-PGM in carbohydrate catabolism and anabolism. The mutation did not significantly affect growth, product formation, or cell composition when glucose or lactose was used as the carbon source. With maltose or trehalose as the carbon source the wild-type strain had a maximum specific growth rate of 0.5 h⁻¹, while the deletion of β-PGM resulted in a maximum specific growth rate of 0.05 h⁻¹ on maltose and no growth at all on trehalose. Growth of the mutant strain on maltose resulted in smaller amounts of lactate but more formate, acetate, and ethanol, and approximately 1/10 of the maltose was found as β-glucose 1-phosphate in the medium. Furthermore, the β-PGM mutant cells grown on maltose were considerably larger and accumulated polysaccharides which consisted of α-1,4-bound glucose units. When the cells were grown at a low dilution rate in a glucose and maltose mixture, the wild-type strain exhibited a higher carbohydrate content than when grown at higher growth rates, but still this content was lower than that in the β-PGM mutant. In addition, significant differences in the initial metabolism of maltose and trehalose were found, and cell extracts did not digest free trehalose but only trehalose 6-phosphate, which yielded β-glucose 1-phosphate and glucose 6-phosphate. This demonstrates the presence of a novel enzymatic pathway for trehalose different from that of maltose metabolism in L. lactis.     

FtsZ in Bacterial Cytokinesis: Cytoskeleton and Force Generator All in One

Summary: FtsZ, a bacterial homolog of tubulin, is well established as forming the cytoskeletal framework for the cytokinetic ring. Recent work has shown that purified FtsZ, in the absence of any other division proteins, can assemble Z rings when incorporated inside tubular liposomes. Moreover, these artificial Z rings can generate a constriction force, demonstrating that FtsZ is its own force generator. Here we review light microscope observations of how Z rings assemble in bacteria. Assembly begins with long-pitch helices that condense into the Z ring. Once formed, the Z ring can transition to short-pitch helices that are suggestive of its structure. FtsZ assembles in vitro into short protofilaments that are ∼30 subunits long. We present models for how these protofilaments might be further assembled into the Z ring. We discuss recent experiments on assembly dynamics of FtsZ in vitro, with particular attention to how two regulatory proteins, SulA and MinC, inhibit assembly. Recent efforts to develop antibacterial drugs that target FtsZ are reviewed. Finally, we discuss evidence of how FtsZ generates a constriction force: by protofilament bending into a curved conformation.     

Mycobacterium tuberculosis cells growing in macrophages are filamentous and deficient in FtsZ rings

FtsZ, a bacterial homolog of tubulin, forms a structural element called the FtsZ ring (Z ring) at the predivisional midcell site and sets up a scaffold for the assembly of other cell division proteins. The genetic aspects of FtsZ-catalyzed cell division and its assembly dynamics in Mycobacterium tuberculosis are unknown. Here, with an M. tuberculosis strain containing FtsZ(TB) tagged with green fluorescent protein as the sole source of FtsZ, we examined FtsZ structures under various growth conditions. We found that midcell Z rings are present in approximately 11% of actively growing cells, suggesting that the low frequency of Z rings is reflective of their slow growth rate. Next, we showed that SRI-3072, a reported FtsZ(TB) inhibitor, disrupted Z-ring assembly and inhibited cell division and growth of M. tuberculosis. We also showed that M. tuberculosis cells grown in macrophages are filamentous and that only a small fraction had midcell Z rings. The majority of filamentous cells contained nonring, spiral-like FtsZ structures along their entire length. The levels of FtsZ in bacteria grown in macrophages or in broth were comparable, suggesting that Z-ring formation at midcell sites was compromised during intracellular growth. Our results suggest that the intraphagosomal milieu alters the expression of M. tuberculosis genes affecting Z-ring formation and thereby cell division.     

Medium-dependent phenotypes of Streptomyces coelicolor with mutations in ftsI or ftsW

Streptomyces coelicolor A3(2) ftsI- and ftsW-null mutants produced aerial hyphae with no evidence of septation when grown on a traditional osmotically enhanced medium. This phenotype was partially suppressed when cultures were grown on media prepared without sucrose. We infer that functional FtsZ rings can form in ftsI- and ftsW-null mutants under certain growth conditions.