Structural changes in cartilage and collagen studied by high temperature Raman spectroscopy

Understanding the high temperature behavior of collagen and collagenous tissue is important for surgical procedures and biomaterials processing for the food, pharmaceutical, and cosmetics industries. One primary event for proteins is thermal denaturation that involves unfolding the polypeptide chains while maintaining the primary structure intact. Collagen in the extracellular matrix of cartilage and other connective tissue is a hierarchical material containing bundles of triple‐helical fibers associated with water and proteoglycan components. Thermal analysis of dehydrated collagen indicates irreversible denaturation at high temperature between 135°C and 200°C, with another reversible event at ～60‐80°C for hydrated samples. We report high temperature Raman spectra for freeze‐dried cartilage samples that show an increase in laser‐excited fluorescence interpreted as conformational changes associated with denaturation above 140°C. Spectra for separated collagen and proteoglycan fractions extracted from cartilage indicate the changes are associated with collagen. The Raman data also show appearance of new features indicating peptide bond hydrolysis at high temperature implying that molecular H₂O is retained within the freeze‐dried tissue. This is confirmed by thermogravimetric analysis that show 5‐7 wt% H₂O remaining within freeze‐dried cartilage that is released progressively upon heating up to 200°C. Spectra obtained after exposure to high temperature and re‐hydration following recovery indicate that the capacity of the denatured collagen to re‐absorb water is reduced. Our results are important for revealing the presence of bound H₂O within the collagen component of connective tissue even after freeze‐drying and its role in denaturation that is accompanied by or perhaps preceded by breakdown of the primary polypeptide structure.     

高效液相色谱法制备Ⅰ型胶原蛋白及其性质研究

从猪皮中分离纯化I型胶原蛋白,并对其部分性质进行研究。采用粗提法,高效液相色谱半制备法进行分离纯化,用分析型高效液相色谱检测纯度,同时对其理化性质进行鉴定,并对所提取的胶原进行全身急性毒性试验及皮肤致敏试验。高效液相色谱测定结果显示所得样品为一单峰,理化性质测定结果符合I型胶原蛋白特征;通过整体水平的安全性评价,表明该方法提取的I型胶原蛋白具有较大的安全性和可靠性。因此,用高效液相色谱可制得高纯度且具有良好生物安全性的I型胶原蛋白。     

UV damage of collagen: insights from model collagen peptides

Fibrils of Type I collagen in the skin are exposed to ultraviolet (UV) light and there have been claims that collagen photo-degradation leads to wrinkles and may contribute to skin cancers. To understand the effects of UV radiation on collagen, Type I collagen solutions were exposed to the UV-C wavelength of 254 nm for defined lengths of time at 4°C. Circular dichroism (CD) experiments show that irradiation of collagen leads to high loss of triple helical content with a new lower thermal stability peak and SDS-gel electrophoresis indicates breakdown of collagen chains. To better define the effects of UV radiation on the collagen triple-helix, the studies were extended to peptides which model the collagen sequence and conformation. CD studies showed irradiation for days led to lower magnitudes of the triple-helix maximum at 225 nm and lower thermal stabilities for two peptides containing multiple Gly-Pro-Hyp triplets. In contrast, the highest radiation exposure led to little change in the T(m) values of (Gly-Pro-Pro)(10) and (Ala-Hyp-Gly)(10) , although (Gly-Pro-Pro)(10) did show a significant decrease in triple helix intensity. Mass spectroscopy indicated preferential cleavage sites within the peptides, and identification of some of the most susceptible sites of cleavage. The effect of radiation on these well defined peptides gives insight into the sequence and conformational specificity of photo-degradation of collagen.     

A peptide study of the relationship between the collagen triple-helix and amyloid

Type XXV collagen, or collagen‐like amyloidogenic component, is a component of amyloid plaques, and recent studies suggest this collagen affects amyloid fibril elongation and has a genetic association with Alzheimer's disease. The relationship between the collagen triple helix and amyloid fibrils was investigated by studying peptide models, including a very stable triple helical peptide (Pro‐Hyp‐Gly)₁₀, an amyloidogenic peptide GNNQQNY, and a hybrid peptide where the GNNQQNY sequence was incorporated between (GPO)_n domains. Circular dichroism and nuclear magnetic resonance (NMR) spectroscopy showed the GNNQQNY peptide formed a random coil structure, whereas the hybrid peptide contained a central disordered GNNQQNY region transitioning to triple‐helical ends. Light scattering confirmed the GNNQQNY peptide had a high propensity to form amyloid fibrils, whereas amyloidogenesis was delayed in the hybrid peptide. NMR data suggested the triple‐helix constraints on the GNNQQNY sequence within the hybrid peptide may disfavor the conformational change necessary for aggregation. Independent addition of a triple‐helical peptide to the GNNQQNY peptide under aggregating conditions delayed nucleation and amyloid fibril growth. The inhibition of amyloid nucleation depended on the Gly‐Xaa‐Yaa sequence and required the triple‐helix conformation. The inhibitory effect of the collagen triple‐helix on an amyloidogenic sequence, when in the same molecule or when added separately, suggests Type XXV collagen, and possibly other collagens, may play a role in regulating amyloid fibril formation. © 2012 Wiley Periodicals, Inc. Biopolymers 97: 795–806, 2012.     

Effects of water gradients and use of urea on skin ultrastructure evaluated by confocal Raman microspectroscopy

The rather thin outermost layer of the mammalian skin, stratum corneum (SC), is a complex biomembrane which separates the water rich inside of the body from the dry outside. The skin surface can be exposed to rather extreme variations in ambient conditions (e.g. water activity, temperature and pH), with potential effects on the barrier function. Increased understanding of how the barrier is affected by such changes is highly relevant for regulation of transdermal uptake of exogenous chemicals. In the present study we investigate the effect of hydration and the use of a well-known humectant, urea, on skin barrier ultrastructure by means of confocal Raman microspectroscopy. We also perform dynamic vapor sorption (DVS) microbalance measurements to examine the water uptake capacity of SC pretreated with urea. Based on novel Raman images, constructed from 2D spectral maps, we can distinguish large water inclusions within the skin membrane exceeding the size of fully hydrated corneocytes. We show that these inclusions contain water with spectral properties similar to that of bulk water. The results furthermore show that the ambient water activity has an important impact on the formation of these water inclusions as well as on the hydration profile across the membrane. Urea significantly increases the water uptake when present in skin, as compared to skin without urea, and it promotes formation of larger water inclusions in the tissue. The results confirm that urea can be used as a humectant to increase skin hydration.     

Probing non-enzymatic glycation of type I collagen: A novel approach using Raman and infrared biophotonic methods

Background

Non-enzymatic glycation is the main post-translational modification of long-life proteins observed during aging and physiopathological processes such as diabetes and atherosclerosis. Type I collagen, the major component in matrices and tissues, represents a key target of this spontaneous reaction which leads to changes in collagen biomechanical properties and by this way to tissue damages.

Methods

The current study was performed on in vitro glycated type I collagens using vibrational microspectroscopies, FT-IR and Raman, to highlight spectral features related to glycation effect.

Results and conclusions

We report a conservation of the triple-helical structure of type I collagen and noticeable variations in the exposure of proline upon glycation. Our data also show that the carbohydrate band can be a good spectroscopic marker of the glycation level, correlating well with the fluorescent AGEs formation with sugar addition.

General significance

These non-invasive and label-free methods can shed new light on the spectral features of glycated collagens and represent an effective tool to study changes in the extracellular matrix observed in vivo during aging or on the advent of a pathological situation.     

Physical properties of type I collagen extracted from fish scales of Pagrus major and Oreochromis niloticas

Type I collagens were extracted from fish scales of Pagrus major and Oreochromis niloticas as a possible underutilized resource for medical materials. The fish scales were demineralized with EDTA and digested by pepsin. The resultant type I collagens contained more than 33.6% of glycine as the most abundant amino acid. The denaturation temperatures of the collagens from P. major and O. niloticas were 303 and 308 K, respectively, both of which were relatively lower than that of porcine dermis collagen (314 K). CD spectra indicated that the denaturation temperatures were dependent on the amount of hydroxyproline, rather than proline residues. Raman spectra also indicated that the relative intensities of Raman lines at 879 and 855 cm⁻¹ assigned to Hyp and Pro rings were changed due to the contents of the imino acids. Significantly, the content of sulphur-containing methionine was higher in the fish scales than in porcine dermis. The enthalpy and entropy estimated from thermal analyses could be correlated to amino acid sequences (Gly-Pro-Hyp) of type I collagens and the number of methionine amino acid residues.     

Characterization of the mechanisms by which gelatinase A, neutrophil collagenase, and membrane-type metalloproteinase MMP-14 recognize collagen I and enzymatically process the two alpha-chains

The turnover of native collagen has been ascribed to different members of the matrix metalloproteinase (MMP) family. Here, the mechanisms by which neutrophil collagenase (MMP-8), gelatinase A (MMP-2), and the ectodomain of MT1-MMP (ectMMP-14) degrade fibrillar collagen were examined. In particular, the hydrolysis of type I collagen at 37 degrees C was investigated to identify functional differences in the processing of the two alpha-chain types of fibrillar collagen. Thermodynamic and kinetic parameters were used for a quantitative comparison of the binding, unwinding, and hydrolysis of triple helical collagen. We demonstrate that the MMP family has developed at least two distinct mechanisms for collagen unwinding and cleavage. MMP-8 and ectMMP-14 display a similar mechanism (although with different catalytic parameters), which is characterized by binding (likely through the hemopexin-like domain) and cleavage of alpha-1 and/or alpha-2 chains without distinguishing between them and keeping the gross conformation of the triple helix (at least during the first cleavage step). On the other hand, MMP-2 binds preferentially the alpha-1 chains (likely through the fibronectin-like domain, which is not present in MMP-8 and ectMMP-14), grossly altering the whole triple helical arrangement of the collagen molecule and cleaving preferentially the alpha-2 chain. These distinctive mechanisms underly a drastically different mode of interaction with triple helical fibrillar collagen I, according to which the MMP domain is involved in binding. These findings can be related to the different role exerted by these MMPs on collagen homeostasis in the extracellular matrix.     

Template‐tethered collagen mimetic peptides for studying heterotrimeric triple‐helical interactions

Collagen mimetic peptides (CMPs) have been used to elucidate the structure and stability of the triple helical conformation of collagen molecules. Although CMP homotrimers have been widely studied, very little work has been reported regarding CMP heterotrimers because of synthetic difficulties. Here, we present the synthesis and characterization of homotrimers and ABB type heterotrimers comprising natural and synthetic CMP sequences that are covalently tethered to a template, a tris(2‐aminoethyl) amine (TREN) succinic acid derivative. Various tethered heterotrimers comprising synthetic CMPs [(ProHypGly)₆, (ProProGly)₆] and CMPs representing specific domains of type I collagen were synthesized and characterized in terms of triple helical structure, thermal melting behavior, and refolding kinetics. The results indicated that CMPs derived from natural type I collagen sequence can form stable heterotrimeric helical complexes with artificial CMPs and that the thermal stability and the folding rate increase with the increasing number of helical stabilizing amino acids (e.g. Hyp) in the peptide chains. Covalent tethering enhanced the thermal stability and refolding kinetics of all CMPs; however, their relative values were not affected suggesting that the tethered system can be used for comparative study of heterotrimeric CMP's folding behavior in regards to chain composition and for characterization of thermally unstable CMPs. © 2010 Wiley Periodicals, Inc. Biopolymers 95: 94–104, 2011.     

The effect of deuterium oxide on the stability of the collagen model peptides H‐(Pro‐Pro‐Gly)10‐OH,H‐(Gly‐Pro‐4(R)Hyp)9‐OH,and Type I collagen

The collagen triple helix has a larger accessible surface area per molecular mass than globular proteins, and therefore potentially more water interaction sites. The effect of deuterium oxide on the stability of collagen model peptides and Type I collagen molecules was analyzed by circular dichroism and differential scanning calorimetry. The transition temperatures (T_m) of the protonated peptide (Pro‐Pro‐Gly)₁₀ were 25.4 and 28.7°C in H₂O and D₂O, respectively. The increase of the T_m of (Pro‐Pro‐Gly)₁₀ measured calorimetrically at 1.0°C min^?1 in a low pH solution from the protonated to the deuterated solvent was 5.1°C. The increases of the T_m for (Gly‐Pro‐4(R)Hyp)₉ and pepsin‐extracted Type I collagen were measured as 4.2 and 2.2°C, respectively. These results indicated that the increase in the T_m in the presence of D₂O is comparable to that of globular proteins, and much less than reported previously for collagen model peptides [Gough and Bhatnagar, J Biomol Struct Dyn 1999, 17, 481–491]. These experimental results suggest that the interaction of water molecules with collagen is similar to the interaction of water with globular proteins, when the ratio of collagen to water is very small and collagen is monomerically dispersed in the solvent. © 2009 Wiley Periodicals, Inc. Biopolymers 93: 93–101, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Partial COL1A2 gene duplication produces features of osteogenesis imperfecta and Ehlers-Danlos syndrome type VII

Type I collagen is the most abundant structural protein in the mammalian body. It exists as a heterotrimer of two subunits in the form [alpha1(I)]2alpha2(I). Pathogenic mutations in COL1A1 and COL1A2, the genes that encode the two subunits, cause a range of phenotypes including mild to lethal forms of osteogenesis imperfecta and a restricted set of Ehlers-Danlos syndrome phenotypes. Lethal mutations usually result from missense mutations that disrupt the normal triple helical structure of the molecule. Multi-exon duplication or deletion in type I collagen genes has rarely been observed and has generally resulted in a lethal or severe phenotype. We report a partial duplication in the COLIA2 gene that causes a relatively mild phenotype, despite the addition of 477 amino acids to the triple helical domain of the proalpha2(I) chain. The abnormal molecule is synthesized and secreted by cultured dermal fibroblasts in a normal fashion. Electron microscopy of dermal tissue reveals small but otherwise near normal collagen fibrils. The gene duplication occurred by mitotic sister chromatid exchange in the mother who is mosaic for the duplication allele. Examination of the abnormal sequence suggests a means by which the duplicated molecule could be processed and properly incorporated into mature collagen fibrils.     

Roles of collagen fibers and its specific molecular chaperone: analysis using HSP47-knockout mice.

Collagen is the most abundant protein of mammals and produces highly organized ultrastructures in the extracellular matrix. There are at least 27 types of collagen in mammalian tissues. While fibrillar collagen (eg. types I, II, III, V and XI) assembles into large fibril structures in the extracellular matrix, type IV collagen produces meshwork-like structures in the basement membranes. As collagen has a distinct triple helix structure composed of Gly-X-Y repeats whose Y position is often hydroxyproline, its folding and maturation process differs considerably from globular proteins. Type I collagen is an assembly of two alpha-1 chains and one alpha-2 chain, and each of the alpha chains contain the N-terminal propeptide, C-terminal propeptide and central triple helical region. The 47-kDa heat shock protein (HSP47) is an endoplasmic reticulum (ER)-resident molecular chaperone that specifically recognizes the triple helical region of collagen and is required for productive folding and maturation of collagen molecules. Only in the presence of HSP47, collagen type I molecules can be assembled into the correctly folded triple helices in the ER of mouse embryos without producing misfolded or non-functionally aggregated molecules. HSP47-knockout embryos die just after 10.5 day due to the absence of functional collagen. Recent our data demonstrated that the non-fibrillar network-forming collagen type IV also requires HSP47 for productive folding and maturation. Here, we discuss the role of HSP47 in the folding and maturation of collagen type IV as well as type I.     

NaCl盐析提取酶解液中Ⅱ型胶原的工艺

采用响应面分析法对酶解液中Ⅱ型胶原的盐析条件进行优化,并通过SDS-PAGE电泳及圆二色谱对其纯度和结构进行鉴定。结果表明:酶解液中Ⅱ型胶原的最佳盐析条件为NaCl浓度3.5mol/L、22.3℃、31.08h,在此条件下Ⅱ型胶原回收率为90.88%;采用盐析法从酶解液中制备的Ⅱ型胶原,具有较高纯度并保持着完整的3股螺旋结构。     

Isolation and characterization of pepsin-treated type III collagen from calf skin.

Calf skin collagen was solubilized by incubating acid-extracted calf skin with pepsin at pH 2.0 and 25 degrees C, conditions that did not cause degradation of the triple helical region of collagen. Type III collagen was separated from type I collagen by differential salt precipitation at pH 7.5. The isolated type III collagen contained mainly gamma and higher molecular weight components cross-linked by reducible and/or non-reducible bonds. The isolated alpha1 (III) chains had an amino acid composition characteristic of type III collagen. Denatured but unreduced type III collagen, chromatographed on carboxymethyl-cellulose, eluted in the alpha 2 region, while after reduction and alkylation the alpha1 (III) chains eluted between the positions of alpha1 (I) and alpha2. The mid-point melting temperature temperature (tm) of type III collagen (35.1 degrees C) in a citrate buffer at pH 3.7 was somewhat lower than that of type I collagen (35.9 degrees C). Renaturation experiments at 25 degrees C showed that denatured type III collagen molecules with intact intramolecular disulfide bridges (gamma components) reform the triple helical structure of collagen much faster than reduced and carboxymethylated alpha1 (III) chains.     

Intrinsic local destabilization of the C‐terminus predisposes integrin α1 I domain to a conformational switch induced by collagen binding

Integrin–collagen interactions play a critical role in a myriad of cellular functions that include immune response, and cell development and differentiation, yet their mechanism of binding is poorly understood. There is increasing evidence that conformational flexibility assumes a central role in the molecular mechanisms of protein–protein interactions and here we employ NMR hydrogen–deuterium exchange (HDX) experiments to explore the impact of slower timescale dynamic events. To gain insight into the mechanisms underlying collagen‐induced conformational switches, we have undertaken a comparative study between the wild type integrin α1 I and a gain‐of‐function E317A mutant. NMR HDX results suggest a relationship between regions exhibiting a reduced local stability in the unbound I domain and those that undergo significant conformational changes upon binding. Specifically, the αC and α7 helices within the C‐terminus are at the center of such major perturbations and present reduced local stabilities in the unbound state relative to other structural elements. Complementary isothermal titration calorimetry experiments have been performed to derive complete thermodynamic binding profiles for association of the collagen‐like triple‐helical peptide with wild type α1 I and E317A mutant. The differential energetics observed for E317A are consistent with the HDX experiments and support a model in which intrinsically destabilized regions predispose conformational rearrangement in the integrin I domain. This study highlights the importance of exploring different timescales to delineate allosteric and binding events.     

过氧化氢对Ⅱ型胶原损伤的拉曼光谱研究

拉曼光谱技术是研究生物分子结构的重要工具,其具有快速、无损、实时检测等优点。在本文中,我们运用拉曼光谱技术研究过氧化氢对关节软骨Ⅱ型胶原的损伤,检测关节软骨Ⅱ型胶原氧化损伤前后的拉曼光谱,以期探讨关节软骨Ⅱ型胶原氧化损伤分子改变机制。我们发现,过氧化氢可导致II型胶原分子内氢键体系发生改变,脯氨酸及羟基氨酸的羟基化程度降低,从而引起主链及侧链构象改变,导致三螺旋结构遭到破坏。总之,本文借助于拉曼光谱技术发现了过氧化氢对Ⅱ型胶原的损伤机制。     

Heterozygosity for a large deletion in the alpha 2(I) collagen gene has a dramatic effect on type I collagen secretion and produces perinatal lethal osteogenesis imperfecta

We characterized a de novo 4.5 kilobase pair deletion in the paternally derived alpha 2(I) collagen allele (COL1A2) from a patient with perinatal lethal osteogenesis imperfecta. The intron-to-intron deletion removed the seven exons which encode residues 586-765 of the triple helical domain of the chain. Type I procollagen molecules that contain the mutant pro-alpha 2(I) chain have a lower than normal thermal stability, undergo increased post-translational modification amino-terminal to the deletion junction, and are retained within the rough endoplasmic reticulum. The block to secretion appears to result from improper assembly of the triple helix, apparently a consequence of a disruption of charge-charge interactions between the shortened pro-alpha 2(I) chain and normal pro-alpha 1(I) chains. The lethal effect may be due to decreased secretion of normal collagen and secretion of a small amount of abnormal collagen that disrupts matrix formation.     

Region-specific role of water in collagen unwinding and assembly

Conformational stability of the collagen triple helix affects its turnover and determines tissue homeostasis. Although it is known that the presence of imino acids (prolines or hydroxyprolines) confer stability to the molecule, little is known regarding the stability of the imino-poor region lacking imino acids, which plays a key role in collagen cleavage. In particular, there have been continuing debates about the role of water in collagen stability. We addressed these issues using molecular dynamics simulations on 30-residue long collagen triple helices, including a structure that has a biologically relevant 9-residue imino-poor region from type III collagen (PDB ID: 1BKV). A torsional map approach was used to characterize the conformational motion of the molecule that differ between imino-rich and imino-poor regions. At temperatures 300 K and above, unwinding initiates at a common cleavage site, the glycine-isoleucine bond in the imino-poor region. This provides a linkage between previous observations that unwinding of the imino-poor region is a requirement for collagenase cleavage, and that isolated collagen molecules are unstable at body temperature. We found that unwinding of the imino-poor region is controlled by dynamic water bridges between backbone atoms with average lifetimes on the order of a few picoseconds, as the degree of unwinding strongly correlated with the loss of water bridges, and unwinding could be either prevented or enhanced, respectively by enforcing or forbidding water bridge formation. While individual water bridges were short-lived in the imino-poor region, the hydration shell surrounding the entire molecule was stable even at 330 K. The diameter of the hydrated collagen including the first hydration shell was about 14 A, in good agreement with the experimentally measured inter-collagen distances. These results elucidate the general role of water in collagen turnover: water not only affects collagen cleavage by controlling its torsional motion, but it also forms a larger-scale lubrication layer mediating collagen self-assembly.     

Quantitation of type I and III collagens using electrophoresis of alpha chains and cyanogen bromide peptides

The methods of quantitating the relative amounts of type I and III collagens in samples containing crosslinked collagen chains were evaluated using electrophoresis of alpha chains and cyanogen bromide peptides. The densitometry areas of the alpha I(I) chains from type I collagen and the alpha I(III) chains from type III collagen were reduced because of the failure of the crosslinked chains to dissociate. However, the ratios of the unit densitometry areas of these chains (area of chain/micrograms type I or III collagen loaded) were constant for type I and III collagens prepared from the same samples of tissue. A calibration factor, which was the same for dermis and mitral valve, was derived to convert the densitometry area ratios to the weight ratios of type I to III collagens. In contrast, the densitometry areas of the alpha I(I) CB8 (type I collagen marker) and the alpha I(III) CB5 (type III collagen marker) were not reduced by crosslinked collagen chains. A calibration factor was also derived to convert the ratios of the densitometry areas of the marker peptides to weight ratios of type I to type III collagens. Almost identical results were obtained when electrophoresis of alpha chains and of cyanogen bromide peptides was used with these calibration factors to quantitate the relative amounts of type I and III collagens in tissue extracts which contained different amounts of crosslinked chains.     

In-situ confocal Raman observation of structural changes of insulin crystals in sequential dehydration process

In-situ confocal Raman spectroscopy combined with relative humidity (RH) control technique was used to study the sequential dehydration process of insulin crystals. By gradually decreasing the ambient RH of the insulin crystal, the content of the hydration water in the crystal was quantitatively controlled. Tyrosine (Tyr) residues were very sensitive to the micro-environmental changes, and four Raman features 828cm(-1), 852cm(-1), 1174cm(-1) and 1206cm(-1) of Tyr were employed to monitor the dehydration process. Taking advantage of the ratios I(852)/I(828) at different RH values, the mole fractions of the 'exposed' and 'buried' Tyr residues were estimated. Moreover, using the ratio I(1174)/I(1206) as an indicator of the dehydration process, three RH regions were discriminated. This is believed to imply that different types of the hydration water were lost step by step, i.e. firstly the 'second-layer' and 'first-layer' classes, then the 'contact' class, and finally, the 'inside' class. In addition, the profile of the amide I band was observed to gradually change with RH. By band fitting of the amide I region, changes in secondary structure were quantitatively determined. And the results showed that nearly 17% of α-helix converted into β-sheet with RH decreasing from 92% to 2%.