Yeast-based recombineering of DNA fragments into plant transformation vectors by one-step transformation

T-DNA binary vectors are often used in plant transformation experiments. Because they are usually very large and have few restriction sites suitable for DNA ligation reactions, cloning DNA fragments into these vectors is difficult. We provide herein an alternative to cloning DNA fragments into very large vectors. Our yeast-based recombineering method enables DNA fragments to be cloned into certain types of T-DNA binary vectors by one-step transformation without the requirement of specific recombination sites or precisely positioned restriction ends, thus making the cloning process more flexible. Moreover, this method is inexpensive and is applicable to multifragment cloning.     

SstI: a restriction endonuclease from Streptomyces sp. stanford.

A strain of Streptomyces has been isolated which is a convenient source of a new restriction endonuclease. The enzyme has been prepared from extracts of these cells and its cleavage sites localized on phage lambda DNA. The enzyme, termed SstI, produces cohesive ends and should be useful for molecular cloning experiments.     

Functional cloning vectors for use in directional cDNA cloning using cohesive ends produced with T4 DNA polymerase.

This paper describes the construction of 'Prime' cloning vectors, which include phage lambda and plasmid vectors useful for functional cloning in oocytes, yeast, and mammalian cells, and their use in a 'Prime' cloning system. The system takes advantage of the very active and precise 3' exonuclease activity of T4 DNA polymerase to produce single-stranded (ss) ends (cut-back) of vector and insert DNA. This results in the highly efficient directional cloning of cDNA and PCR-amplified DNA. The system obviates the need to digest insert DNA with a restriction endonuclease to unveil cloning sites, and thus eliminates the chance of internal digestion of the insert DNA. The cloning of PCR-amplified DNA, which is sometimes difficult, is made routine with this system. The 'Prime' sequence is included in vector cloning sites and cDNA and PCR primers. The 'Prime' sequence was chosen so that the ss sticky ends are nonpalindromic and will hybridize only to the appropriate partners. This makes cloning with the 'Prime' system very efficient, because neither the vector nor insert DNA is lost to unproductive self-hybridization.     

外切核酸酶Ⅲ介导的DNA分子克隆

DNA克隆技术,作为最基本的现代分子生物学实验技术之一, 已经成为生物医学研究领域的重要研究手段。传统的分子克隆方法需要经过限制性内切酶酶切和DNA连接酶连接的步骤,是否存在合适的酶切位点和DNA连接酶的效率成为影响克隆的重要限制因素。本文描述了一种由外切核酸酶Ⅲ介导的,以3′-5′外切核酸酶活性和细菌细胞内DNA修复机制为理论基础的DNA分子克隆方法,称为不依赖连接酶的分子克隆（ligation-independent cloning, LIC）|证明了该方法的高效性和可靠性,并进一步对酶的用量、反应温度、反应时间、片段载体比例和量等多个参数进行了优化,建立了一种快速、简便和高效的DNA克隆方法。     

Phasmids as effective and simple tools for construction and analysis of gene libraries

Phasmid lambda pMYF131, a hybrid of phage lambda vectors and plasmid pUC19, was constructed. The phasmid and its derivatives were shown to be efficient vectors for construction and analysis of gene libraries in Escherichia coli cells. The lambda pMYF131 DNA molecule contains all the genes and regions essential for phage lytic development. The plasmid cannot be packaged either in the monomeric or the oligomeric form due to its specific length. Elongation of the DNA molecule by ligation with fragments of foreign DNA can make it packageable and this is easily detected by plaque formation. Hence, the procedures used to construct genomic libraries can be simplified by selection of only recombinant DNA molecules just at the time and on the basis of their packaging in vitro. The output of recombinant clones per vector molecule was several times higher for vector lambda pMYF131, compared to phage vector lambda L47.1AB, and attained 3 x 10(6) clones per micrograms DNA. Vector and recombinant phasmids can be obtained in large quantities in plasmid form. lambda pMYF131 contains nine unique restriction sites which allow the cloning of DNA fragments with blunt ends and of fragments with various types of cohesive ends, obtained by digestion with 14 prototype restriction enzymes. The maximal size of the cloned DNA fragments is approx. 20 kb for lambda pMYF131. Phasmid vectors were used to construct libraries of bovine, pig and quail genomes, and genomic libraries of 17 species of bacteria. Application of suitable methods allowed the identification 13 individual genes within these libraries.     

Physical characterization of SCP1, a giant linear plasmid from Streptomyces coelicolor.

SCP1, coding for the methylenomycin biosynthesis genes in Streptomyces coelicolor, was shown to be a giant linear plasmid of 350 kb with a copy number of about four by analysis with pulsed-field gel electrophoresis. A detailed physical map of SCP1 was constructed by extensive digestion with six restriction endonucleases, by DNA hybridization experiments, and finally by cloning experiments. SCP1 has unusually long terminal inverted repeats of 80 kb on both ends and an insertion sequence at the end of the right terminal inverted repeat. Analysis by pulsed-field gel electrophoresis in agarose containing sodium dodecyl sulfate revealed that a protein is bound to the terminal 4.1-kb SpeI fragments derived from both ends of SCP1. Treatment with lambda exonuclease or exonuclease III and SpeI digestion also indicated that the 5' ends of SCP1 are attached to a protein.     

A general method for inserting specific DNA sequences into cloning vehicles

A general method has been developed to introduce any double-stranded DNA molecule into cloning vehicles at different restriction endonuclease sites. In this method a chemically synthesized decadeoxyribonucleotide duplex, containing a specific restriction endonuclease sequence, is joinlex DNA is cut by the same restriction endonuclease to generate the cohesive ends. It is then inserted into the restriction endonuclease cleavage site of the cloning vehicle. To demonstrate the feasibility of this new method, we have inserted separately the synthetic lac operator DNA at the Bam I and HindIII cleavage sites of the plasmid pMB9 DNA.     

Enhanced recovery and restriction mapping of DNA fragments cloned in a new lambda vector.

In this paper we describe a modification to the lambda vector EMBL3 which greatly expedites the construction of restriction maps of cloned DNA sequences. In the modified vector, EMBL3cos, all the phage coding sequences are placed to the right of the cloning sites so that the left cohesive end is separated by only 200bp, rather than 20kb (as in conventional lambda vectors), from the inserted DNA fragment. We show that reliable restriction maps can be rapidly constructed from partial digests of clones made in this vector by labelling the left cohesive end with a complementary 32P-labelled oligonucleotide. In addition, we quantify the restriction of clones containing human DNA by the McrA and McrB systems of E. coli and show that the use of Mcr- plating strains can increase the yield of recombinant phage up to tenfold, to give cloning efficiencies of greater than or equal to 10(7) pfu/microgram of human DNA.     

Physical map of the bacteriophage T5 genome based on the cleavage products of the restriction endonucleases SalI, SmaI, BamI, and HpaI.

A physical map of the bacteriophage T5 genome was constructed by ordering the fragments produced by cleavage of T5 DNA with the restriction endonucleases SalI (4 fragments), SmaI (4 fragments), BamI (5 fragments), and HpaI (28 fragments). The following techniques were used to order the fragments. (i) Digestion of DNA from T5 heat-stable deletion mutants was used to identify fragments located in the deletable region. (ii) Fragments near the ends of the T5 DNA molecule were located by treating T5 DNA with lambda exonuclease before restriction endonuclease cleavage. (iii) Fragments spanning other restriction endonuclease cleavage sites were identified by combined digestion of T5 DNA with two restriction endonucleases. (iv) The general location of some fragments was determined by isolating individual restriction fragments from agarose gels and redigesting the isolated fragments with a second restriction enzyme. (v) Treatment of restriction digests with lambda exonuclease before digestion with a second restriction enzyme was used to identify fragments near, but not spanning, restriction cleavage sites. (vi) Exonucleases III treatment of T5 DNA before restriction endonuclease cleavage was used to locate fragments spanning or near the natural T5 single-chain interruptions. (vii) Analysis of the products of incomplete restriction endonuclease cleavage was used to identify adjacent fragments.     

A physical map of the genome of temperate phage phi 3T.

A physical map of the genome of Bacillus subtilis bacteriophage phi 3T was constructed by ordering the fragments produced by cleavage of phi 3T DNA with restriction endonucleases AvaII (2 fragments), BglI (2 fragments), SmaI (3 fragments), BamHI (6 fragments), SalI (7 fragments), AvaI (7 fragments), SacI (12 fragments), PstI (14 fragments), and BglII (26 fragments). Two techniques were used to order the fragments: (1) Sets of previously ordered restriction fragments were isolated and redigested with the endonuclease whose cleavage sites were to be mapped. (2) Fragments located near the ends of the genome or near the ends of other restriction fragments were ordered by treating the DNA with lambda exonuclease prior to restriction endonuclease cleavage. The susceptibility of phi 3T DNA to 15 other restriction endonucleases is also reported.     

Insertion of the cos-site into DNA of phage M13 and its packing in proteins of phage lambda

The cos-site of lambda phage from pHC79 cosmide is transferred to DNA from M13 mp18 phage. The recombinant DNA thus obtained (MC18) is efficiently packaged into lambda proteins in vitro. The BamHI-HindIII fragment of pGP588 (a pBR322 derivatives containing fragment of human DNA) is subcloned into MC18. Although this pGP588 fragment contains numerous Alu repeats, no essential rearrangements of the insert were revealed. The efficiency infection by recombinant DNA packaged with lambda proteins is about 1 X 10(5) pfu/microgram DNA, whereas in the similar conditions the efficiency of lambda EMBL3A was 1 X 10(6) pfu/microgram. It is assumed that the MC vectors might be suitable for cloning and sequencing large fragments either with cohesive or blunt ends. It opens also the way to construct genomic libraries in single-stranded phages.     

Temperate Bacillus bacteriophage SP16 genome is circularly permuted and terminally redundant.

The physical nature of temperate Bacillus bacteriophage SP16 DNA was analyzed by electron microscopy, exonuclease digestion, denaturation-renaturation experiments, and restriction enzyme analysis. The SP16 genome is a linear molecule 60.0 +/- 2.0 kilobases in length without cohesive ends. Electron micrographs of denatured and renatured SP16 DNA showed that the DNA is circularly permuted. The genome possesses terminal redundancy, as demonstrated by electron microscopy of exonuclease III-digested DNA.     

New cloning vectors and techniques for easy and rapid restriction mapping

We have modified plasmid, phage lambda and cosmid cloning vectors to be of general use for easily and unambiguously determining restriction maps of recombinant DNA molecules. Each vector is constructed so that it contains the rarely found NotI restriction site joined to a short synthetic linker sequence that is followed by a multiple cloning site. DNA cloned into these vectors may be restriction-mapped by either of two methods. In one technique, the cloned DNA is completely digested with NotI, followed by partial digestion with any other restriction enzyme. After electrophoresis and transfer to a nylon membrane, the fragments are hybridized to a labeled probe complementary to the NotI linker. In the second technique, referred to as recession hybridization detection, cloned DNA is digested with NotI and then briefly treated with exonuclease III to recess the 3' ends. After hybridizing a labeled complementary oligodeoxynucleotide to the single-stranded 5' end containing the linker sequence, the DNA is partially digested with another restriction enzyme, electrophoresed and the gel is exposed to x-ray film. With either method the size of each labeled fragment corresponds directly to the distance that a restriction site is located from the NotI linker terminus. Methods for obtaining partial restriction enzyme digests have been devised so that as many as 20 different enzymes may be conveniently mapped on a single gel in little more than a day. The vectors and techniques described may also be adapted to automated or semi-automated devices that read fragment lengths and calculate the resulting restriction map.(ABSTRACT TRUNCATED AT 250 WORDS)     

A bacteriophage lambda vector for cloning with BamHI and Sau3A

A phage lambda cloning vector has been constructed which contains a single site for the restriction endonuclease BamHI. Since Sau3A and BglII produce the same cohesive ends as BamHI, this vector can also be used to clone DNA fragments generated with either of these enzymes. We have used this vector to construct an Escherichia coli library using partial digestion with Sau3A. This vector will be most useful for applications requiring genetic analysis of cloned E. coli genes.     

Sticky PCR: A PCR-based protocol for targeted protein engineering

This article describes a simple but powerful PCR-based protocol for the generation of cohesive ends on linear DNA fragments, permitting the precise engineering of DNA constructs for a variety of applications. These include the introduction of deletion mutations, domain swapping, creating hybrid DNA fusions, or targeted protein engineering. This novel method can also facilitate the cloning of large or complex DNA fragments into a relevant cloning vector independent of the use of internal restriction endonuclease sites. The protocol involves the amplification of the required fragments by polymerase chain reaction through the use of two sets of overlapping desalted oligonucleotide primers. The subsequent mixing, denaturation and re-annealing of these products present correct cohesive terminal ends for ligation. There is no requirement for special vectors, enzymes or bases, suggesting that this protocol provides a unique way of engineering constructs in a rapid and cost-effective way for specific applications, such as precise deletion or swapping of various domains of the epidermal growth factor receptor to determine their role in membrane localization.     

A simplified procedure for cDNA and genomic library construction using nonpalindromic oligonucleotide adaptors

The properties and characteristics of oligonucleotide adaptors for use in a simplified procedure for the construction of cDNA and genomic DNA libraries are described. The adaptors are suitable for joining to blunt ended cDNA or sheared genomic DNA, and then to the cohesive ends of restriction sites in vectors. Each adaptor consists of two oligonucleotides with complementary but nonpalindromic sequences that include an internal restriction site, a 5' phosphorylated blunt end, and an overlapping or staggered 5' hydroxylated end corresponding to a restriction endonuclease site in a vector of choice. Ligation of the blunt end to high molecular weight target DNA proceeds efficiently and there is no tandem concatenation of the adaptor. Insertion into the appropriate vector only requires ligation of the cohesive ends. There is no requirement for methylation, restriction enzyme cleavage, G-C tailing, or denaturation after ligation of the adaptor to the target DNA, all characteristics of other procedures.     

Rapid and reliable universal cloning of influenza A virus genes by target-primed plasmid amplification

Reverse genetics has become pivotal in influenza virus research relying on rapid generation of tailored recombinant influenza viruses. They are rescued from transfected plasmids encoding the eight influenza virus gene segments, which have been cloned using restriction endonucleases and DNA ligation. However, suitable restriction cleavage sites often are not available. Here, we describe a cloning method universal for any influenza A virus strain which is independent of restriction sites. It is based on target-primed plasmid amplification in which the insert provides two megaprimers and contains termini homologous to plasmid regions adjacent to the insertion site. For improved efficiency, a cloning vector was designed containing the negative selection marker ccdB flanked by the highly conserved influenza A virus gene termini. Using this method, we generated complete sets of functional gene segments from seven influenza A strains and three haemagglutinin genes from different serotypes amounting to 59 cloned influenza genes. These results demonstrate that this approach allows rapid and reliable cloning of any segment from any influenza A strain without any information about restriction sites. In case the PCR amplicon ends are homologous to the plasmid annealing sites only, this method is suitable for cloning of any insert with conserved termini.     

Use of conversion adaptors to clone antigen genes in lambda gt11

A strategy has been devised and tested to employ EcoRI conversion adaptors for cloning 5' cohesive-ended restriction fragments into the unique EcoRI site of the lambda gt11 expression vector. Five lambda gt11 chromosomal libraries were constructed with Rickettsia tsutsugamushi genomic DNA digested with restriction enzymes generating five different 5' cohesive ends. Recombinant phage yields as high as 10(7) plaque forming units were achieved without amplification of the five libraries. Sequences encoding epitopes of all eight R. tsutsugamushi polypeptide antigens, previously identified by Western blot analysis, were obtained in the five lambda gt11 expression libraries. Recombinant antigen expression was dependent on lambda gt11 lac promoter induction in 39% of the recombinants assayed. This method significantly improves the efficiency of genomic lambda gt11 library construction by eliminating blunt-ended ligation and simplifying the removal of unligated EcoRI-ended oligonucleotides.     

Modification of DNA ends and detection of restriction enzyme recognition sequences in their ligated junctions

A program has been developed for the modelling of modificationsin DNA ends, for the construction of ligated junctions, andfor the analysis in these junctions of new restriction enzymerecognition sequences. This program allows the analysis of restrictionenzyme specifities in ligated junctions of cohesive or bluntDNA ends. Cohesive ends are considered in their natural configurationor after modification by possible blunt-ending procedures. Theprogram also allows the modelling of partial filling-in for5'-single-stranded ends. This program has proven useful forthe design of sequences with new restriction sites or to predictor confirm the sequence of junctions created by the ligationof modified ends. Received on October 28, 1987; accepted on November 23, 1987     

Restriction endonuclease mapping of bacteriophage phi105 and closely related temperate Bacillus subtilis bacteriophages rho10 and rho14.

Cleavage maps of the three similar Bacillus subtilis temperate bacteriophages, phi105, rho10, and rho14, were constructed by partial digestion analysis utilizing the restriction endonuclease EcoRI. Comparison of the topography of these maps indicates that all phage DNAs posses cohesive ends and a number of EcoRI restriction sites; the fragments are conserved, and the estimated base substitution/nucleotide divergence between these phages is 0.03 to 0.07 based on conserved fragments or between 0.03 and 0.11 based on conserved cleavage sites. These lines of evidence indicate that phi105, rho10, and rho14 are closely related. Double-enzyme digestion analysis reveals that rho14 DNA has unique SalGI and BglII restriction sites and phi105 DNA has a unique SalGI restriction site, making these phages possible cloning vectors for B. subtilis.