Codon optimization of the BirA enzyme gene leads to higher expression and an improved efficiency of biotinylation of target proteins in mammalian cells

Biotinylation of proteins is an attractive alternative to 'epitope-tagging', due to the strong biotin-(strept)avidin interaction and to the wide commercial availability of reagents for detection and purification of biotinylated macromolecules. Enzymatic biotinylation of target proteins in vivo using short biotin acceptor domains was described previously. Their use in mammalian cell requires expression of the bacterial biotinylation enzyme BirA. Here we describe the construction of a humanized version of BirA, with most of the rare codons replaced by codons that are more frequently used in human cells. The humanized BirA is expressed better in mammalian cells, resulting in improved efficiency of biotinylation in vivo. We anticipate that the humanized BirA gene will find use in many applications that involve in vivo biotinylation.     

Amine coupling versus biotin capture for the assessment of sulfonamide as ligands of hCA isoforms

This work was dedicated to the development of a reliable SPR method allowing the simultaneous and quick determination of the affinity and selectivity of designed sulfonamide derivatives for hCAIX and hCAXII versus hCAII, in order to provide an efficient tool to discover drugs for anticancer therapy of solid tumors. We performed for the first time a comparison of two immobilization approaches of hCA isoforms. First one relies on the use of an amine coupling strategy, using a CM7 chip to obtain higher immobilization levels than with a CM5 chip and consequently the affinity with an higher precision (CV% < 10%). The second corresponds to a capture of proteins on a streptavidin chip, named CAP chip, after optimization of biotinylation conditions (amine versus carboxyl coupling, biotin to protein ratio). Thanks to the amine coupling approach, only hCAII and hCAXII isoforms were efficiently biotinylated to reach relevant immobilization (3000 RU and 2700 RU, respectively) to perform affinity studies. For hCAIX, despite a successful biotinylation, capture on the CAP chip was a failure. Finally, concordance between affinities obtained for the three derivatives to CAs isozymes on both chips has allowed to valid the approaches for a further screening of new derivatives.     

Antibodies Biotinylated Using a Synthetic Z-domain from Protein A Provide Stringent In Situ Protein Detection

Antibody-based protein profiling on a global scale using immunohistochemistry constitutes an emerging strategy for mapping of the human proteome, which is crucial for an increased understanding of biological processes in the cell. Immunohistochemistry is often performed indirectly using secondary antibodies for detection, with the benefit of signal amplification. Direct immunohistochemistry instead brings the advantage of multiplexing; however, it requires labeling of the primary antibody. Many antibody-labeling kits do not specifically target IgG and may therefore cause labeling of stabilizing proteins present in the antibody solution. A new conjugation method has been developed that utilizes a modified Z-domain of protein A (ZBPA) to specifically target the Fc part of antibodies. The aim of the present study was to compare the ZBPA conjugation method and a commercially available labeling kit, Lightning-Link, for in situ protein detection. Fourteen antibodies were biotinylated with each method and stained using immunohistochemistry. For all antibodies tested, ZBPA biotinylation resulted in distinct immunoreactivity without off-target staining, regardless of the presence of stabilizing proteins in the buffer, whereas the majority of the Lightning-Link biotinylated antibodies displayed a characteristic pattern of nonspecific staining. We conclude that biotinylated ZBPA domain provides a stringent method for antibody biotinylation, advantageous for in situ protein detection in tissues.     

Intracellular production of a soluble and functional monomeric streptavidin in Escherichia coli and its application for affinity purification of biotinylated proteins

Monomeric forms of avidin and streptavidin [(strept)avidin] have many potential applications. However, generation of monomeric (strept)avidin in sufficient quantity is a major limiting factor. We report the successful intracellular production of an improved version of monomeric streptavidin (M4) in a soluble and functional state at a level of approximately 70 mg/L of an Escherichia coli shake flask culture. It could be affinity purified in one step using biotin agarose with 70% recovery. BIAcore biosensor analysis using biotinylated bovine serum albumin confirmed its desirable kinetic properties. Two biotinylated proteins with different degrees of biotinylation (5.5 and 1 biotin per protein) pre-mixed with cellular extracts from Bacillus subtilis were used to examine the use of M4-agarose in affinity purification of protein. Both biotinylated proteins could be purified in high purity with 75-80% recovery. With the mild elution and matrix regeneration conditions, the M4-agarose had been reused four times without any detectable loss of binding capability. The relatively high-level overproduction and easy purification of M4, excellent kinetic properties with biotinylated proteins and mild procedure for protein purification make vital advancements in cost-effective preparation of monomeric streptavidin affinity matrix with desirable properties for purification of biotinylated molecules.     

Design, production, and characterization of an engineered biotin ligase (BirA) and its application for affinity purification of staphylokinase produced from Bacillus subtilis via secretion

A major attraction in using Bacillus subtilis as an expression host for heterologous protein production is its ability to secrete extracellular proteins into the culture medium. To take full advantage of this system, an efficient method for recovering the target protein is crucial. For secretory proteins which cannot be purified by a simple scheme, in vitro biotinylation using biotin ligase (BirA) offers an effective alternative for their purification. The availability of large amounts of quality BirA can be critical for in vitro biotinylation. We report here the engineering and production of an Escherichia coli BirA and its application in the purification of staphylokinase, a fibrin-specific plasminogen activator, from the culture supernatant of Bacillus subtilis via in vitro biotinylation. BirA was tagged with both a chitin-binding domain and a hexahistidine tail to facilitate both its purification and its removal from the biotinylated sample. We show in this paper how, in a unique way, we solved the problem of protein aggregation in the E. coli BirA production system to achieve a yield of soluble functional BirA hitherto unreported in the literature. Application of this novel BirA to protein purification via in vitro biotinylation in general will also be discussed. Biotinylated staphylokinase produced in the study not only can act as an intermediate for easy purification, it can also serve as an important element in the creation of a blood clot targeting and dissolving agent.     

Solid-phase biotinylation of antibodies

Biotinylation is an established method of labeling antibody molecules for several applications in life science research. Antibody functional groups such as amines, cis hydroxyls in carbohydrates or sulfhydryls may be modified with a variety of biotinylation reagents. Solution-based biotinylation is accomplished by incubating antibody in an appropriate buffered solution with biotinylation reagent. Unreacted biotinylation reagent must be removed via dialysis, diafiltration or desalting. Disadvantages of the solution-based approach include dilution and loss of antibody during post-reaction purification steps, and difficulty in biotinylation and recovery of small amounts of antibody. Solid-phase antibody biotinylation exploits the affinity of mammalian IgG-class antibodies for nickel IMAC (immobilized metal affinity chromatography) supports. In this method, antibody is immobilized on a nickel-chelated chromatography support and derivitized on-column. Excess reagents are easily washed away following reaction, and biotinylated IgG molecule is recovered under mild elution conditions. Successful solid phase labeling of antibodies through both amine and sulfhydryl groups is reported, in both column and mini-spin column formats. Human or goat IgG was bound to a Ni-IDA support. For sulfhydryl labeling, native disulfide bonds were reduced with TCEP, and reduced IgG was biotinylated with maleimide-PEO(2) biotin. For amine labeling, immobilized human IgG was incubated with a solution of NHS-PEO(4) biotin. Biotinylated IgG was eluted from the columns using a buffered 0.2 M imidazole solution and characterized by ELISA, HABA/avidin assay, probing with a streptavidin-alkaline phosphatase conjugate, and binding to a monomeric avidin column. The solid phase protocol for sulfhydryl labeling is significantly shorter than the corresponding solution phase method. Biotinylation in solid phase is convenient, efficient and easily applicable to small amounts of antibody (e.g. 100 microg). Antibody biotinylated on-column was found to be equivalent in stability and antigen-recognition ability to antibody biotinylated in solution. Solid-phase methods utilizing Ni-IDA resin have potential for labeling nucleic acids, histidine-rich proteins and recombinant proteins containing polyhistidine purification tags, and may also be applicable for other affinity systems and labels.     

A novel multi-affinity tag system to produce high levels of soluble and biotinylated proteins in Escherichia coli

We describe here a novel multi-affinity tag vector that can be used to produce high levels of soluble, in vivo biotinylated proteins in Escherichia coli. This system combines the solubility-enhancing ability of maltose-binding protein (MBP), the versatility of the hexahistidine tag (His(6)), and the site-specific in vivo biotinylation of a 15-amino acid tag (AviTag). We used this multi-tag system in an attempt to improve expression levels of two prokaryotic proteins-elongation factor Tu (TufB) and DNA gyrase subunit A (GyrA)-as well as two eukaryotic nuclear receptors-glucocorticoid receptor (GR) and small heterodimer partner (SHP). The multi-tag system not only vastly improved the expression of the two prokaryotic proteins tested, but also yielded complete, site-specific, in vivo biotinylation of these proteins. The results obtained from the TufB expression and purification are presented and discussed in detail. The nuclear receptors, though soluble as fusion partners, failed to remain soluble once the MBP tag was cleaved. Despite this limitation of the system, the multi-affinity tag approach is a useful system that can improve expression of some otherwise insoluble or poorly expressing proteins, to obtain homogeneous, purified, fully biotinylated protein for downstream applications.     

Artifactual detection of biotin on histones by streptavidin

Biotinylation is a recent addition to the list of reported posttranslational modifications made to histones. Holocarboxylase synthetase (HCS) and biotinidase have been implicated as biotinylating enzymes. However, the details of the mechanism and the regulation of biotin transfer on and off histones remains unclear. Here we report that in a cell culture system low biotin availability reduces biotinylation of carboxylases, yet apparent biotinylation of histones is unaffected. This is despite biotin depletion having detrimental effects on cell viability and proliferation. Further analysis of the widely used method for detecting biotin on histones, streptavidin blotting, revealed that streptavidin interacts with histones independently of biotin binding. Preincubation of streptavidin with free biotin reduced binding to biotinylated carboxylases but did not block binding to histones. To investigate biotinylation of histones using an alternative detection method independent of streptavidin, incorporation of 14C biotin into biotinylated proteins was analyzed. Radiolabeled biotin was readily detectable on carboxylases but not on histones, implying very low levels of biotin in the nucleus attached to histone proteins (< 0.03% biotinylation). In conclusion, we would caution against the use of streptavidin for investigating histone biotinylation.     

Quantitative analysis of surface plasma membrane proteins of primary and metastatic melanoma cells

Plasma membrane proteins play critical roles in cell-to-cell recognition, signal transduction and material transport. Because of their accessibility, membrane proteins constitute the major targets for protein-based drugs. Here, we described an approach, which included stable isotope labeling by amino acids in cell culture (SILAC), cell surface biotinylation, affinity peptide purification and LC-MS/MS for the identification and quantification of cell surface membrane proteins. We applied the strategy for the quantitative analysis of membrane proteins expressed by a pair of human melanoma cell lines, WM-115 and WM-266-4, which were derived initially from the primary and metastatic tumor sites of the same individual. We were able to identify more than 100 membrane and membrane-associated proteins from these two cell lines, including cell surface histones. We further confirmed the surface localization of histone H2B and three other proteins by immunocytochemical analysis with confocal microscopy. The contamination from cytoplasmic and other nonmembrane-related sources is greatly reduced by using cell surface biotinylation and affinity purification of biotinylated peptides. We also quantified the relative expression of 62 identified proteins in the two types of melanoma cells. The application to quantitative analysis of membrane proteins of primary and metastatic melanoma cells revealed great potential of the method in the comprehensive identification of tumor progression markers as well as in the discovery of new protein-based therapeutic targets.     

Strategies for site-specific protein biotinylation using in vitro, in vivo and cell-free systems: toward functional protein arrays

This protocol details methodologies for the site-specific biotinylation of proteins using in vitro, in vivo and cell-free systems for the purpose of fabricating functional protein arrays. Biotinylation of recombinant proteins, in vitro as well as in vivo, relies on the chemoselective reaction between cysteine-biotin and a reactive thioester group at the C-terminus of a protein generated via intein-mediated cleavage. The cell-free system utilizes low concentrations of biotin-conjugated puromycin. Unlike other approaches that require tedious and costly downstream steps of protein purification, C-terminal biotinylated proteins can be captured directly onto avidin-functionalized slides from a mixture of other cellular proteins to generate the corresponding protein array. These methods were designed to maintain the integrity and activity of proteins in a microarray format, which potentially allows simultaneous functional assays of thousands of proteins. Assuming that the target proteins have been cloned into the expression vector, transformation of bacterial strain and growth of starter culture would take approximately 2 days. Expression and in vitro protein purification and biotinylation will take approximately 3 days whereas the in vivo method would take approximately 2 days. The cell-free protein biotinylation strategy requires only 6-8 h.     

Efficient and versatile one-step affinity purification of in vivo biotinylated proteins: expression, characterization and structure analysis of recombinant human glutamate carboxypeptidase II

Affinity purification is a useful approach for purification of recombinant proteins. Eukaryotic expression systems have become more frequently used at the expense of prokaryotic systems since they afford recombinant eukaryotic proteins with post-translational modifications similar or identical to the native ones. Here, we present a one-step affinity purification set-up suitable for the purification of secreted proteins. The set-up is based on the interaction between biotin and mutated streptavidin. Drosophila Schneider 2 cells are chosen as the expression host, and a biotin acceptor peptide is used as an affinity tag. This tag is biotinylated by Escherichia coli biotin-protein ligase in vivo. We determined that localization of the ligase within the ER led to the most effective in vivo biotinylation of the secreted proteins. We optimized a protocol for large-scale expression and purification of AviTEV-tagged recombinant human glutamate carboxypeptidase II (Avi-GCPII) with milligram yields per liter of culture. We also determined the 3D structure of Avi-GCPII by X-ray crystallography and compared the enzymatic characteristics of the protein to those of its non-tagged variant. These experiments confirmed that AviTEV tag does not affect the biophysical properties of its fused partner. Purification approach, developed here, provides not only a sufficient amount of highly homogenous protein but also specifically and effectively biotinylates a target protein and thus enables its subsequent visualization or immobilization.     

Identification of the tRNA-binding protein Arc1p as a novel target of in vivo biotinylation in Saccharomyces cerevisiae

Biotin is an essential cofactor of cell metabolism serving as a protein-bound coenzyme in ATP-dependent carboxylation, in transcarboxylation, and certain decarboxylation reactions. The involvement of biotinylated proteins in other cellular functions has been suggested occasionally, but available data on this are limited. In the present study, a Saccharomyces cerevisiae protein was identified that reacts with streptavidin on Western blots and is not identical to one of the known biotinylated yeast proteins. After affinity purification on monomeric avidin, the biotinylated protein was identified as Arc1p. Using 14C-labeled biotin, the cofactor was shown to be incorporated into Arc1p by covalent and alkali-stable linkage. Similar to the known carboxylases, Arc1p biotinylation is mediated by the yeast biotin:protein ligase, Bpl1p. Mutational studies revealed that biotinylation occurs at lysine 86 within the N-terminal domain of Arc1p. In contrast to the known carboxylases, however, in vitro biotinylation of Arc1p is incomplete and increases with BPL1 overexpression. In accordance to this fact, Arc1p lacks the canonical consensus sequence of known biotin binding domains, and the bacterial biotin:protein ligase, BirA, is unable to use Arc1p as a substrate. Arc1p was shown previously to organize the association of MetRS and GluRS tRNA synthetases with their cognate tRNAs thereby increasing the substrate affinity and catalytic efficiency of these enzymes. Remarkably, not only biotinylated but also the biotin-free Arc1p obtained by replacement of lysine 86 with arginine were capable of restoring Arc1p function in both arc1Delta and arc1Deltalos1Delta mutants, indicating that biotinylation of Arc1p is not essential for activity.     

A plasmid expression system for quantitative in vivo biotinylation of thioredoxin fusion proteins in Escherichia coli.

The high affinity binding interaction of biotin to avidin or streptavidin has been used widely in biochemistry and molecular biology, often in sensitive protein detection or protein capture applications. However, in vitro chemical techniques for protein biotinylation are not always successful, with some common problems being a lack of reaction specificity, inactivation of amino acid residues critical for protein function and low levels of biotin incorporation. This report describes an improved expression system for the highly specific and quantitative in vivo biotinylation of fusion proteins. A short 'biotinylation peptide', described previously by Schatz, is linked to the N-terminus of Escherichia coli thioredoxin (TrxA) to form a new protein, called BIOTRX. The 'biotinylation peptide' serves as an in vivo substrate mimic for E. coli biotin holoenzyme synthetase (BirA), an enzyme which usually performs highly selective biotinylation of E.coli biotin carboxyl carrier protein (BCCP). A plasmid expression vector carrying the BIOTRX and birA genes arranged as a bacterial operon can be used to obtain high level production of soluble BIOTRX and BirA proteins and, under appropriate culture conditions, BIOTRX protein produced by this system is completely biotinylated. Fusions of BIOTRX to other proteins or peptides, whether these polypeptides are linked to the C-terminus or inserted into the BIOTRX active site loop, are also quantitatively biotinylated. Both types of BIOTRX fusion can be captured efficiently on avidin/streptavidin media for purification purposes or to facilitate interaction assays. We illustrate the utility of the system by measurements of antibody and soluble receptor protein binding to BIOTRX fusions immobilized on streptavidin-conjugated BIAcore chips.     

Targeted and proximity-dependent promiscuous protein biotinylation by a mutant Escherichia coli biotin protein ligase

A method for general protein biotinylation by enzymatic means has been developed. A mutant form (R118G) of the biotin protein ligase (BirA) of Escherichia coli is used and biotinylation is thought to proceed by chemical acylation of protein lysine side chains by biotinoyl-5'-AMP released from the mutant protein. Bovine serum albumin, chloramphenicol acetyltransferase, immunoglobulin chains and RNAse A as well as a large number of E. coli proteins have been biotinylated. The biotinylation reaction is proximity dependent in that the extent of biotinylation is much greater when the ligase is coupled to the acceptor protein than when the acceptor is free in solution. This is presumably due to rapid hydrolysis of the acylation agent, biotinoyl-5'-AMP. Therefore, when the mutant ligase is attached to one partner involved in a protein-protein interaction, it can be used to specifically tag the other partner with biotin, thereby permitting facile detection and recovery of the proteins by existing avidin/streptavidin technology.     

Detection of immobilized proteins on nitrocellulose membranes using a biotinylation-dependent system.

Proteins are biotinylated after immobilization on nitrocellulose sheets by reaction with a biotinyl-succinimide ester. The biotinyl residues are visualized by streptavidin-peroxidase-based detection systems either by deposition of a colored formazan dye or by enhanced chemiluminescence (ECL), the latter being 10-fold more sensitive. The sensitivity of the staining procedure is dramatically improved by the inclusion of the reporter deposit technique into the staining procedure: the initially bound peroxidase generates phenolic radicals from biotinyltyramide, enhancing the number of biotinyl residues in the vicinity of the first biotinylation site. Thus the detection limit is lowered to 1 pg of protein with the ECL detection. The new method is compared with silver stain and immunochemical staining in Western blots and furthermore its suitability is demonstrated for 2-D gel electrophoresis.     

Bacterial expression of functional, biotinylated peripheral cannabinoid receptor CB2

A biotin-protein ligase recognition site (BRS) was inserted into a polypeptide comprised of the maltose-binding protein, the peripheral cannabinoid receptor (CB2), thioredoxin A, and a polyhistidine tag at the carboxy terminus. Expression levels of the recombinant receptor in Escherichia coli BL21(DE3) cells were approximately 1mg per liter of bacterial culture. The biotinylated CB2-fusion fully retained its ligand-binding capacity. Introduction of the BRS at the C-terminus of the CB2 fusion protein (construct CB2-109) resulted in its complete in vivo biotinylation; the biotinylated protein was streptavidin-binding competent. Positioning of the BRS near the N-terminus of CB2 (CB2-112) resulted in a very low level of biotinylation in vivo. However, the detergent solubilized and purified CB2-112 fusion protein were successfully biotinylated in vitro by action of a BirA biotin-protein ligase. The biotinylated CB2-112 fusion protein was cleaved by the tobacco etch virus protease at specifically inserted sites, and deposited onto monomeric avidin agarose beads. Biotinylation of the recombinant CB2 receptor enabled not only purification but also immobilization of the GPCR on a solid support in homogeneous orientation which is beneficial for subsequent structural characterization.     

Identification of plasma membrane associated mature beta-hexosaminidase A, active towards GM2 ganglioside, in human fibroblasts

Mature beta-hexosaminidase A has been found associated to the external leaflet of plasma membrane of cultured fibroblasts. The plasma membrane association of beta-hexosaminidase A has been directly determined by cell surface biotinylation followed by affinity chromatography purification of the biotinylated proteins, and by immunocytochemistry. The immunological and biochemical characterization of biotinylated beta-hexosaminidase A revealed that the plasma membrane associated enzyme is fully processed, suggesting its lysosomal origin.     

Immunodetection of biotinylated lymphocyte-surface proteins by enhanced chemiluminescence: a nonradioactive method for cell-surface protein analysis.

Biotinylation and radioiodination have been compared for labeling lymphocyte-surface proteins and the labeled proteins symmetrically immunoprecipitated with antibodies recognizing major lymphocyte markers such as the murine Thy-1, CD25 (the alpha subunit of the interleukin-2 receptor), CD45, and human CD2 glycoproteins. The detection of biotinylated proteins by enhanced chemiluminescence after transfer to nitrocellulose was found to be fast and as efficient as the detection of iodinated proteins by autoradiography. The vectoriality of cell-surface biotinylation was ascertained by two-dimensional electrophoresis of the cellular extract in which the major cytoplasmic proteins were not found biotinylated. This nonradioactive labeling procedure offers a convenient and efficient alternative to radiolabeling of cell surfaces for the biochemical analysis of extracellular domains of membrane proteins.     

The Use of Biotinylated Poly(ADP-Ribose) for Studies on Poly(ADP-Ribose)-Protein Interaction

Poly(ADP-ribose) is routinely detected by the use of radioactive polymers formed from labeled substrates. In this report a simple and time-saving method for the biotinylation and the detection of poly(ADP-ribose) on blots is described. The polymer modified by light-induced reaction with photobiotin was colorimetrically detected and quantified, using streptavidine-alkaline phosphatase conjugates. The separation of poly(ADP-ribose) chains on polyacrylamide gels was not affected by the biotinylation of the polymers. When biotinylated poly(ADP-ribose) was used to detect the poly(ADP-ribose) binding capability of proteins in ligand blots, the results were comparable to those obtained with poly([³²P]ADP-ribose). Experiments with histones and rat liver nuclear proteins demonstrate that in studies on poly(ADP-ribose)-protein interaction, this method is applicable to the detection of poly(ADP-ribose) binding proteins.