Olive mill wastes: Biochemical characterizations and valorization strategies

The olive mill waste generated from olive oil extraction is a major environmental issue, particularly in Mediterranean areas. The extraction of olive oil is achieved through discontinuous or continuous processes. The two processes yield three fractions: a solid residue and two liquid phases (oil and olive mill wastewater). The characterization of these two by-products showed that they are mainly composed of phenolic compounds, carbohydrates, organic acids and mineral nutrients variably distributed depending on the process employed and the agronomic practices. Untreated olive by-products discharged between November and March into the environment are a major ecological issue for olive oil-producing countries due to their high toxic organic loads, low pH, and high chemical and biological demands. In this context, recent research studies highlight on the treatment approaches and valorization options for dealing with olive mill waste residues, predominantly those allowing for the recovery of valuable natural components such as phenolic compounds, dietary fibers, animal feed, biofuel, biogaz, enzymes, polymers and other. The impact of the chemical heterogeneity and water content of olive mill by-products about these processes of valorization and bioconversion is discussed.     

Determination of aerobic biodegradation kinetics of olive oil mill wastewater

Aerobic biological treatment was conducted for the treatment of high strength olive oil mill wastewater (OMW). Two different approaches were used for kinetic modeling of OMW biodegradation. TOC removal and CO₂–C evolution were monitored in an open and a closed bioreactor systems, respectively. Gompertz, Refractory organics plus first-order (RFO) and Chen–Hashimoto equations were applied to estimate the kinetic parameters by using the data from bioreactors. Furthermore, change in oxidation stage of carbon was monitored and temperature dependency of OMW biodegradation was investigated based on activation energy. At room temperature, 64% of TOC was removed in the open bioreactor while cumulative CO₂–C evolution was 6.32 g L⁻¹ in closed the bioreactor. Higher biodegradation efficiency and kinetic parameters were obtained at 25 °C rather than 10 °C. Gompertz and RFO equations provided better fitting with CO₂–C and TOC data, respectively. Experimental and kinetic estimations indicated that OMW constituted of approximately 30% refractory organics. The comparison of two different modeling approaches showed that kinetic modeling based on CO₂–C provided better correlation with the experimental data. Temperature coefficient indicated that biological degradation of OMW is slightly dependent on temperature.     

Bioremediation of olive oil mill wastewater and production of microbial biomass

Olive oil mill wastewater (OMWW) was used as a substrate for the culture of a mixture of edible fungi in order to obtain a potentially useful microbial biomass and to induce a partial bioremediation of this fastidious waste. Before fermentation, the OMWW underwent an alkaline-oxidative treatment with the aim of decreasing the polyphenolic content which is the main cause of its toxicity. The fungal mixture grew fairly well in the treated OMWW and reached a maximum of biomass production within about 14 days of fermentation at room temperature. Up to 150–160 g of wet biomass was obtained per liter of OMWW. Analysis of the partially dehydrated biomass revealed a protein content of about 13 g% and 6 g% of row fiber. A relevant presence of unsaturated fatty acids was found, as well as the presence of significant amounts of vitamins A and E, nicotinic acid, calcium, potassium and iron. The possibility of using the microbial biomass produced from OMWW as an additive to animal feed is discussed.     

The effect of pretreatment on anaerobic activity of olive mill wastewater using batch and continuous systems

This study was focused on several physico-chemical and biological treatment methods that may affect the reduction of the organic load in olive mill wastewater (OMW). In this study, removal of 95% of the phenolic compounds present in OMW was achieved using sand filtration and subsequent treatment with powdered activated carbon in a batch system. This pretreatment for OMW was found to enhance the anaerobic activity of the sludge in the batch system significantly. The efficiency of organic load removal achieved by the anaerobic treatment of untreated OMW in batch reactors with tap water dilution factors below 1:10, reached approximately 65% chemical oxygen demand (COD) removal. However, in the up-flow sludge anaerobic blanket (UASB) reactor, COD removal efficiency of 80–85% was reached at a hydraulic retention time (HRT) of 5 days with an influent COD concentration of 40 g l⁻¹ and organic loading rate (OLR)=8 g⁻¹ COD l⁻¹ per day.     

Plant growth hormone production from olive oil mill and alcohol factory wastewaters by white rot fungi

In this study, olive oil mill and alcohol factory wastewaters have been tested as growth media for the production of plant growth hormones. Funalia trogii ATCC 200800 and Trametes versicolor ATCC 200801 have been tested. Gibberellic acid (GA₃), abscisic acid (ABA), indole acetic acid (IAA), and cytokinin were determined in the culture media of these fungi. Both organisms produced enhanced levels of all three hormones in the presence of either of the wastewaters.     

Performance and microbial diversity of palm oil mill effluent microbial fuel cell

Aim: To evaluate the bioenergy generation and the microbial community structure from palm oil mill effluent using microbial fuel cell. Methods and Results: Microbial fuel cells enriched with palm oil mill effluent (POME) were employed to harvest bioenergy from both artificial wastewater containing acetate and complex POME. The microbial fuel cell (MFC) showed maximum power density of 3004 mW m^?2 after continuous feeding with artificial wastewater containing acetate substrate. Subsequent replacement of the acetate substrate with complex substrate of POME recorded maximum power density of 622 mW m^?2. Based on 16S rDNA analyses, relatively higher abundance of Deltaproteobacteria (88·5%) was detected in the MFCs fed with acetate artificial wastewater as compared to POME. Meanwhile, members of Gammaproteobacteria, Epsilonproteobacteria and Betaproteobacteria codominated the microbial consortium of the MFC fed with POME with 21, 20 and 18·5% abundances, respectively. Conclusions: Enriched electrochemically active bacteria originated from POME demonstrated potential to generate bioenergy from both acetate and complex POME substrates. Further improvements including the development of MFC systems that are able to utilize both fermentative and nonfermentative substrates in POME are needed to maximize the bioenergy generation. Significance and Impact of the Study: A better understanding of microbial structure is critical for bioenergy generation from POME using MFC. Data obtained in this study improve our understanding of microbial community structure in conversion of POME to electricity.     

Optimization of novel halophilic lipase production by Fusarium solani strain NFCCL 4084 using palm oil mill effluent

Among different sources of lipases, fungal lipases have continued to attract a wide range of applications. Further, halophilic lipases are highly desirable for biodiesel production due to the need to mitigate environmental pollution caused as result of extensive use of fossil fuels. However, currently, the high production cost limits the industrial application of lipases. In order to address this issue, we have attempted to optimize lipase production by Fusarium solani NFCCL 4084 and using palm oil mill effluent (POME) based medium. The production was optimized using a combinatory approach of Plackett-Burman (PB) design, one factor at a time (OFAT) design and face centred central composite design (FCCCD). The variables (malt extract, (NH₄)₂SO₄, CaCl₂, MgSO₄, olive oil, peptone, K₂HPO₄, NaNO₃, Tween-80, POME and pH) were analyzed using PB design and the variables with positive contrast coefficient were found to be K₂HPO₄, NaNO₃, Tween-80, POME and pH. The significant variables selected were further analyzed for possible optimum range by using OFAT approach and the findings revealed that K₂HPO₄, NaNO₃, and Tween-80 as the most significant medium components, and thus were further optimized by using FCCCD. The optimum medium yielded a lipase with an activity of 7.8 U/ml, a significant 3.2-fold increase compared to un-optimized medium. The present findings revealed that POME is an alternative and suitable substrate for halophilic lipase production at low cost. Also, it is clearly evident that the combinatory approach employed here proved to be very effective in producing high activity halophilic lipases, in general.     

Biodegradation of olive oil mill wastewaterby Coriolus versicolor and Funalia trogii:effects of agitation, initial COD concentration, inoculum size and immobilization

The biodegradation of olive oil mill wastewater (OOMW) by Coriolus versicolor and Funalia trogii was investigated. Initial COD concentration, agitation and inoculum size were all found to be significant for biodegradation. Adding glucose, sulphate or nitrogen had no effect on biodegradation. During growth in optimum conditions, C.versicolor removed approximately 63% COD, 90% phenol and 65% colour within 6 days and F. trogii removed approximately 70% COD, 93% phenol and 81% colour of the OOMW used. The fungi also excreted large amounts of extracellular laccase into the medium. High biodegradation yields were also obtained by fungi immobilized in calcium alginate gels.     

Life history and production of Neomysis mercedis in two British Columbia coastal lakes

The life history and production characteristics of Neomysis mercedis from two British Columbia lakes were examined for their potential influence on zooplankton and limnetic fish communities. During the day, mysids in shallow Muriel Lake (45 m) were on or near the bottom; in Kennedy Lake (> 100 m), mysids remained deeper than 50 m. In both lakes, mysids spent summer nights at 0–15 m depths despite > 20 °C temperatures. Mysid density was not strongly correlated with lake depth. Mysids generally displayed spring to early summer minima and late summer to fall maxima in numbers and biomass. Single peaks in gravid females and juvenile mysid abundance, and the absence of pronounced seasonal size changes of gravid females suggest that N. mercedis produced a single generation each year. Fecundities of study lake mysids are the lowest on record, and although size-dependent, exhibited unusually high variability. Annual productivity of mysids averaged 485 mg m^–2 y^–1 (range 205–690). Calculations indicate mysids consume several times more zooplankton per annum than limnetic fish do. N. mercedis is likely an important competitor of juvenile sockeye salmon (Oncorhynchus nerka) since: (i) sockeye exhibit food limited growth and survival patterns in coastal lakes, (ii) mysids and sockeye consume similar zooplankton prey and (iii) mysids do not contribute greatly to sockeye diet (i.e. < 26% of summer and fall diets by numbers or weight).     

Efforts to Explain and Control the Prolonged Thermophilic Period in Two-phase Olive Oil Mill Sludge Composting

The aim of this paper was to evaluate the use of different bulking agents in different ratios as a means to control, optimise and eventually reduce the duration of the thermophilic period in two-phase olive oil mill sludge (OOMS) composting. The bulking agents used were: (i) olive tree leaves (OTL), (ii) olive tree shredded branches (OTB) and (iii) woodchips (WDC). The selection of these materials was based on their abundance and availability on the island of Crete, the southernmost point of Greece. The ratios studied were: Pile 1, OOMS:OTL in 1:1 v/v; Pile 2, OOMS:WDC in 1:1.5 v/v; Pile 3, OOMS:OTL in 1:2 v/v; Pile 4, OOMS:OTL:OTB in 1:1:1 v/v; and Pile 5, OOMS:OTL:OTB in 1:1:2 v/v. The composting system used was that of windrows with the volume of each pile approximately 20–25 m³. The experiments took place over two consecutive years. A composting turner was used and turnings were performed at one and two week intervals. In each pile a variety of physiochemical parameters were monitored. Temperature remained high in all five trials. Piles 1, 2, 3, 4 and 5 temperatures recorded values of above 50 °C for 106, 158, 160, 175 and 183 days, respectively. Volumes were reduced by approximately 67%, 62%, 63%, 80% and 84%, respectively. Temperature remained high, mainly due to the presence in large amounts of oily substances which during their complete oxidation release important amounts of energy and aid the cometabolism of more stable molecules such as lignin. This process is better described as the slow “burning” of a “fuel” mixture in an “engine” than composting. This approach is based on the extensive similarities of this process to that of crude oil sludge or similar waste composting.     

Life history and production of Agapetus quadratus (Trichoptera: Glossosomatidae) in a temporary, spring-fed stream

1. The life history and trophic basis of production of the caddisfly grazer Agapetus quadratus were studied in the torrent Gorg Blau, a spring‐fed stream on the island of Majorca that dries annually during summer. 2. Quantitative random samples were taken every 2–3 weeks during an annual surficial flow period, from November 2000 to mid‐July 2001. Instars of field‐collected larvae were determined by measurements of head width and pronotum length, and the sex of all pupae was determined to study sexual dimorphism and sex ratio. 3. Stage‐frequency histograms suggested a trivoltine population, with an average cohort time of 4 months. Larval development was asynchronous, with continuous growth and overlapping generations. Recruitment peaks were identified in mid‐November, early March and late June, indicative of winter, spring and summer generations. On average, females were larger than males and the mean sex ratio was 2 : 3 (females : males). Population densities and biomasses derived from the field data were used to calculate production and turnover rate. 4. Annual production of A. quadratus in the torrent Gorg Blau (4.80 g dry mass m^?2 year^?1) was the highest ever reported for the genus, being comparable with that estimated for some insects with rapid development and multiple cohorts. 5. Estimates of production of A. quadratus were combined with foregut content analysis to estimate the fraction of total production derived from the principal food sources: algae and organic detritus. Algae supported a major proportion of the production of this grazer. 6. The low density of predators characteristic of many temporary streams, and the small amplitudes in discharge and temperature during most of the wet period that characterise the spring habitats might allow high levels of grazer production in this particular Mediterranean stream.     

Cellulase production from palm oil mill effluent in Malaysia: Economical and technical perspectives

The demand for cellulases has increased tremendously over the last few decades. This is due to its numerous applications in industry and also because it can be used to hydrolyze cellulosic materials into sugars that can be fermented into bioethanol and bio‐based products. This does not only open up a big and significant market for cellulases, but also provides another source of biofuel and bioenergy in the future. Nevertheless, the cost of the existing substrates for cellulase fermentation is very high if required for large‐scale production. Sustainable supplies and an economically feasible biomass are needed to reduce the cost of cellulase production. Palm oil mill effluent (POME) is rich in carbohydrates, proteins, nitrogenous compounds, lipids, minerals, cellulose, hemicelluloses and lignin. It can be used naturally as a fermentation medium, either for cellulase or other value‐added product fermentation. In Malaysia, a large and continually increasing amount of POME is produced every year because of the high global demand for palm oil. Hence, the development of cellulase production from POME is reviewed, covering the POME production, cellulase production and the major challenges together with the future prospects of these processes.     

From bobolinks to bears: interjecting geographical history into ecological studies, environmental interpretation, and conservation planning

In these days of supercomputer‐based global climate models, large ecosystem experiments including Biosphere II, and aircraft‐borne sensors of ozone holes it is often overlooked that many fundamental insights into ecological processes and major environmental issues come not through reductionist or high‐tech studies of modern conditions but from thoughtful consideration of nature’s history. In fact, it is foolhardy to make any ecological interpretation of modern landscapes or environments or to formulate policy in conservation or natural resource management without an historical context that extends back decades, at least, but preferably centuries or millennia. Oftentimes, the ecological and conservation communities, in their search for more detail on the present and simulation of the future, appear to have forgotten the value of a deep historical perspective in research and application. However, the willingness of the geographical sciences to embrace broad temporal and spatial perspectives and to consider cultural as well as natural processes is worth emulating as we address environmental subjects in the new millennium.     

Dairy manure pellets and palm oil mill effluent as alternative nutrient sources in cultivating Sporosarcina pasteurii for calcium carbonate bioprecipitation

Microbially induced carbonate precipitation (MICP) is a process that hydrolysis urea by microbial urease to fill the pore spaces of soil with induced calcium carbonate (CaCO₃) precipitates, which eventually results in improved or solidified soil. This research explored the possibility of using dairy manure pellets (DMP) and palm oil mill effluent (POME) as alternative nutrient sources for Sporosarcina pasteurii cultivation and CaCO₃ bioprecipitation. Different concentrations (20–80 g l⁻¹) of DMP and POME were used to propagate the cells of S. pasteurii under laboratory conditions. The measured CaCO₃ contents for MICP soil specimens that were treated with bacterial cultures grown in DMP medium (60%, w/v) was 15·30 ± 0·04 g ml⁻¹ and POME medium (40%, v/v) was 15·49 ± 0·05 g ml⁻¹ after 21 days curing. The scanning electron microscopy showed that soil treated with DMP had rhombohedral structure-like crystals with smooth surfaces, whilst that of POME entailed ring-like cubical formation with rough surfaces Electron dispersive X-ray analysis was able to identify a high mass percentage of chemical element compositions (Ca, C and O), whilst spectrum from Fourier-transform infrared spectroscopy confirmed the vibration peak intensities for CaCO₃. Atomic force microscopy further showed clear topographical differences on the crystal surface structures that were formed around the MICP treated soil samples. These nutrient sources (DMP and POME) showed encouraging potential cultivation mediums to address high costs related to bacterial cultivation and biocementation treatment.     

Evaluating and modeling biogas production from municipal fat, oil, and grease and synthetic kitchen waste in anaerobic co-digestions

The feasibility of using synthetic kitchen waste (KW) and fat, oil, and grease (FOG) as co-substrates in the anaerobic digestion of waste activated sludge (WAS) was investigated using two series of biochemical methane potential (BMP) tests. Ranges of ideal substrate to inoculum (S/I) ratio were determined for the FOG (0.25-0.75) and KW (0.80-1.26) as single substrates in the first experiment. The second experiment, which estimated the methane production performances of FOG and KW as co-substrates for WAS co-digestion, was conducted based on the optimal parameters selected from the results of the first experiment. Results indicated that co-digestions with FOG and KW enhanced methane production from 117±2.02 mL/gTVS (with only WAS) to 418±13.7 mL/gTVS and 324±4.11 mL/gTVS, respectively. FOG exhibited more biogas production than KW as co-substrate. Non-linear regression results showed that co-substrate addition shortened the lag phases of organic biodegradation from 81.8 (with only WAS) to 28.3 h with FOG and 3.90 h with KW.     

Life history,population dynamics and production of Pontoporeia hoyi (Crustacea,Amphipoda) in relation to the trophic gradient of Lake George,New York

The life history characteristics, population dynamics and production of Pontoporeia hoyi in Lake George, New York, were studied from May 1981 through October 1982. P. hoyi, in terms of both density and standing crop, is the most prevalent member of the deep water macrobenthos of Lake George. It reproduces in the winter, with young being released in the late winter-early spring. At the southernmost study site, young released in the spring grew to 6–7 mm in length and bred during their first winter. At the remaining sites, P. hoyi required two years to complete its life cycle. This difference in life history characteristics can be related to food availability and temperature differences. The open waters of the south end of Lake George are not only more productive but are also more closely associated with the littoral zone, providing a wealth of bacteria-rich detritus for benthic deposit feeders. The greater food availability in the south basin of Lake George is reflected in significantly larger brood sizes and smaller size at maturity for P. hoyi populations from the south end of the lake.The southernmost study site has significantly greater P. hoyi density and standing crop than all other sites. The cohort of the year dominated density and standing crop at the southern site while the cohort of the previous year dominated standing crop at the other sites. Peak abundance ranged from 600 · m^–2 at the north site to 2 900 · m^–2 at the south site. Cohort production ranged from 2g · m^–2 at the north site to 15g · m^–2 at the south site.     

Nutrient removal and biomass production: advances in microalgal biotechnology for wastewater treatment

Owing to certain drawbacks, such as energy-intensive operations in conventional modes of wastewater treatment (WWT), there has been an extensive search for alternative strategies in treatment technology. Biological modes for treating wastewaters are one of the finest technologies in terms of economy and efficiency. An integrated biological approach with chemical flocculation is being conventionally practiced in several-sewage and effluent treatment plants around the world. Overwhelming responsiveness to treat wastewaters especially by using microalgae is due to their simplest photosynthetic mechanism and ease of acclimation to various habitats. Microalgal technology, also known as phycoremediation, has been in use for WWT since 1950s. Various strategies for the cultivation of microalgae in WWT systems are evolving faster. However, the availability of innovative approaches for maximizing the treatment efficiency, coupled with biomass productivity, remains the major bottleneck for commercialization of microalgal technology. Investment costs and invasive parameters also delimit the use of microalgae in WWT. This review critically discusses the merits and demerits of microalgal cultivation strategies recently developed for maximum pollutant removal as well as biomass productivity. Also, the potential of algal biofilm technology in pollutant removal, and harvesting the microalgal biomass using different techniques have been highlighted. Finally, an economic assessment of the currently available methods has been made to validate microalgal cultivation in wastewater at the commercial level.