Structure and stability of transposon 5-mediated cointegrates

We have determined the structure of a set of independently derived, Tn5-mediated cointegrates and examined the stability of several examples. A variety of cointegrate structures was found, including those mediated by the entire compound transposon, and those mediated by a single flanking IS50 element, which was always IS50-R, and never IS50-L. IS50-R but not IS50-L is reported to code for a protein(s) required for transposition. This finding confirms that IS50-L is relatively inactive and suggests that the active transposition protein(s) acts largely in cis on IS50-R. Another class of cointegrate was created by inverse transposition of Tn5 (using the inside ends of the flanking elements). In addition, we found an unexpectedly large set of cointegrates, in which the joint between the two plasmids was not adjacent to the transposon. All cointegrates analysed were found to be stable. This suggests that Tn5, unlike the transposon Tn3, does not transpose via an obligate cointegrate intermediate. This finding is compared to previous results with Tn5 and Tn9, and is discussed in terms of current models of transposition.     

Mechanism of Is1 Transposition in E. COLI: Choice between Simple Insertion and Cointegration

Insertion element IS1 and IS1-based transposon Tn9 generate cointegrates (containing vector and target DNAs joined by duplicate copies of IS1 or Tn9) and simple insertions (containing IS1 or Tn9 detached from vector sequences). Based on studies of transposon Tn5 we had proposed a conservative (non-replicative) model for simple insertion. Others had proposed that all transposition is replicative, occurring in a rolling circle structure, and that the way DNA strands are joined when replication terminates determines whether a simple insertion or a cointegrate is formed.--We selected for the transposition of amp and cam resistance markers from pBR322::Tn9 plasmids to an F factor in recA-E. coli and identified products containing three and four copies of IS1, corresponding to true cointegrates (from monomeric plasmids), and simple insertions (from dimeric plasmids). The simple insertions with four copies of IS1 outnumbered those with three by a ratio of about 3:1, whereas true cointegrates containing three copies of IS1 were more numerous than those with four.--A straightforward rolling circle model had predicted that the simple insertions containing three copies of IS1 should be more frequent than those with four. Because we obtained the opposite result we propose that simple insertions only arise when the element fails to replicate or if replication starts but then terminates prematurely. The two classes of products, simple insertions and cointegrates, reflect alternative conservative and replicative fates, respectively, of an early intermediate in transposition.     

A comparison of intramolecular rearrangements promoted by transposons Tn5 and Tn10.

The bacterial transposon Tn10 has previously been shown to move to other genomic sites by a conservative mechanism, whereby the transposon is excised by double-strand breaks and inserted between a pair of staggered nicks at the target. Other transposons, like Tn3, have been shown to transpose by a replicative mechanism that involves symmetrical nicking of the element and formation of the 'Shapiro intermediate', which can mature into either a cointegrate or a simple insert. The situation with respect to Tn5 is unclear; it was originally reported to use a conservative mechanism, but other evidence suggests that the mechanism might be replicative. In this paper, rearrangements of adjacent DNA promoted by Tn10 and Tn5 have been compared using positive selection for galactose-resistance to detect such rearrangements. Tn10 promoted the formation of adjacent deletions (that started from an inside end of Tn10), deletion/inversions and simple IS10 insertions, but no cointegrates. This behaviour is fully consistent with a conservative mechanism. In contrast, Tn5 was found to promote formation of adjacent deletions (that started mainly from an outside end of Tn5), IS50 insertions (that were frequently accompanied by inversions of adjacent DNA) and cointegrates. These characteristics seem compatible with a replicative, rather than a conservative, mode of transposition. Clearly, Tn5 and Tn10 exhibit some significant differences in their transposition. These results, and results of some previous experiments, have been interpreted to mean that Tn5 could use a replicative mechanism for its transposition.     

Study of the role of the insA open reading frame in the IS1 insertion element structure during transposition and resolution of the IS1 mediated cointegrates

In order to elucidate the function of the IS1 insA gene derivatives of plasmid pUC19::Tn9' with insertions of synthetic oligonucleotides were obtained. The latter are equal or multiple of 9 b.p. in length and are located in the Pst1 site within each of the two IS1 copies of the Tn9' transposon. The insertions of the nine base oligonucleotides code for the neutral amino acids and do not shift the reading frame. One of the mutant transposon obtained - Tn9'/X was studied on the ability to form simple insertions and plasmid cointegrates. For this purpose the pUC19 derivatives carrying the wild type and mutant transposon were mobilized by conjugative plasmid pRP3.1. It was found that the damage of the insA gene does not influence the ability of transposon to form simple insertions and plasmid cointegrates in both recA - and rec+ cells of E. coli. However, the frequency of the cointegrate formation in the subsequent transposition of the mutant transposon from pRP3.1::Tn9'/X to pBR322 was by 10-20 times lower in comparison to the wild type transposon. Instable (dissociating) Tn9'/X-mediated plasmid cointegrates formed by interaction pUC19::Tn9'/X and pRP3.1 were obtained. It was shown that in the E. coli recA-cells such cointegrates dissociate, as a rule, "correctly", i.e. they segregate mainly plasmids of types pUC19::Tn9'/X and pUC19::IS1/X. The data obtained correspond with the notion that the gene insA product is not essential for transposition, but is, possibly, involved in the formation of the IS1-generated deletions.     

Analysis of IS21-mediated mobilization of plasmid pACYC184 by R68.45 in Escherichia coli

Escherichia coli plasmids like pACYC184 or pBR325 can be mobilized by the P-type plasmid R68.45, which carries a tandem duplication of insertion element IS21, at a frequency of 10^?3–10^?5 per donor cell. Analysis of exconjugant cells revealed that plasmid mobilization occurs via cointegrate formation involving transposition of IS21. No resolution of cointegrates of pACYC184 and the P-type plasmid could be found in recA recipient cells. In the cointegrate, the E. coli plasmid is flanked by single copies of IS21 in direct orientation. After resolution of the cointegrate in recA⁺ recipients, the mobilizing plasmid R68.45 lost one copy of IS21 becoming indistinguishable from plasmid R68. It was shown that during mobilization, insertion element IS21 transposes to the mobilized plasmid. Insertion sites and orientations of IS21 in 33 pACYC184::IS21 insertion mutants have been determined: IS21 was found to be integrated in plasmid pACYC184 in different regions but only in one orientation. The IS21 tandem structure of plasmid R68.45 and its role in the mobilization process is discussed.     

Cointegrate resolution following transposition of Tn1792 in Streptomyces avermitilis facilitates analysis of transposon-tagged genes.

The insertion sequence IS6100, belonging to the IS6 family, normally forms a cointegrate as an end product of transposition. The IS6100-based minitransposon, Tn1792, has been developed as a genetic tool to mutagenise antibiotic-producing Streptomyces. Here, we describe resolution of Tn1792 cointegrates in Streptomyces avermitilis that can facilitate both the initial isolation of Tn1792 insertion mutants and also the subsequent rescue of Tn1792-tagged sequences. This is the first reported example of cointegrate resolution for an IS6-type transposable element. As a result of mutagenesis, several putative genes involved in morphological development and antibiotic production have been isolated.     

Function of the InsA gene in the IS1 element of the Tn9' transposon: influence of oligonucleotide inserts in the InsA gene on formation of simple insertions and plasmid cointegrates]

To elucidate the role of the insA reading frame in transposition of the IS1 element of the Tn9' transposon, the derivatives of plasmids pUC19::Tn9' and pUC19::IS1 have been obtained using oligonucleotide inserts of the length equal or exceeding 9 bp and equal to 10 bp. The ability of mutant variants of the Tn9' transposon and the IS1 element to form simple insertions and plasmid cointegrates was studied. To this end, experiments were performed on mobilization of the derivatives of pUC19 containing mutant variants of the IS1 element and Tn9' as well as of the plasmids pUC19::Tn9' by the conjugative plasmid pRP3.1. According to the data obtained, mutations (inserts) in the insA gene have no influence on the frequency of transposition of the IS1 element and Tn9' from the plasmid pUC19 to pRP3.1. At the same time, the frequency of transposition events of mutant variants of Tn9' from the plasmid pRP3.1 to pBR322 is more than 10 times lower in comparison with the wild type transposon. The data obtained are in accordance with the assumption that the insA gene is not essential for transposition. A hypothesis is put forward explaining the role of the insA gene product in the process of bringing together short inverted repeats of the IS1, which are the sites for the transposase to be recognized at first stages of transposition.     

Structure and stability of cointegrating plasmids mediated by the IS1 elements in transposon delta Tn9'

In order to elucidate the structural features of the transposon Tn9', representative of the Tn9 family, which define the ability of the transposon to produce unstable cointegrates, we have obtained a derivative of this transposon carrying a deletion in its central region. The deletion in the obtained transposon delta Tn9' covers a DNA segment of about 50 bp in length, occupying the most distal position in relation to the cat gene, at its junction with the right copy of the IS1. The structure and stability of the IS1/delta Tn9'-mediated cointegrates between the plasmids pDK57.1 (pBR322::delta Tn9') and pRP3.1, a deletion derivative of RP1, have been studied. The three types of cointegrates were found. Those of the type I are predominantly formed, due to the left copy of the IS1 which in delta Tn9' occupies proximal position to the promoter of the cat gene. These cointegrates contain three copies of IS1 and are of high stability. The cointegrates of the type II contain two entire copies of delta Tn9' (i.e. four copies of IS1) as well as the structures of the type II, representing the cointegrate equivalent of inverse transposition and also containing four copies of IS1. Cointegrates of the type II and III dissociate efficiently in the rec+ cells but, in contrast to the cointegrates mediated by the original transposon Tn9', are unable to dissociate efficiently in the recA- cells. It was concluded that a DNA segment in the central region of Tn9' may be essential for the expression of the IS1-specific resolvase encoded by the right copy of IS1.     

Structural and functional analyses of the fosfomycin resistance transposon Tn2921.

The fosfomycin resistance transposon Tn2921 is flanked by directly repeated sequences homologous to the Tn10-related insertion sequence IS10. The nonrepeated DNA sequences of Tn2921 can be deleted without affecting the transposition ability of the element, showing that at least one of the direct repeats is an active insertion sequence. Transposition of Tn2921 seems to occur through direct transposition, since cointegrates have not been observed. The evolutionary relatedness of Tn2921 and IS10 is discussed.     

Intermolecular Transposition of Is10 Causes Coupled Homologous Recombination at the Transposition Site

Interplasmid and chromosome to plasmid transposition of IS10 were studied by assaying inactivation of the phage 434 cI gene, carried on a low copy number plasmid. This was detected by the activity of the tet gene expressed from the phage 434 P(R) promoter. Each interplasmid transposition resulted in the fusion of the donor and acceptor plasmids into cointegrate structure, with a 9-bp duplication of the target DNA at the insertion site. Cointegrate formation was abolished in δrecA strains, although simple insertions of IS10 were observed. This suggests a two-stage mechanism involving IS10 conservative transposition, followed by homologous recombination between the donor and the acceptor. Two plasmids carrying inactive IS10 sequences were fused to cointegrates at a 100-fold lower frequency, suggesting that homologous recombination is coupled to and stimulated by the transposition event. Each IS10 transposition from the chromosome to the acceptor plasmid involved replicon fusion, providing a mechanism for IS10-mediated integration of extrachromosomal elements into the chromosome. This was accompanied by the formation of an additional copy of IS10 in the chromosome. Thus, like replicative transposition, conservative transposition of IS10 is accompanied by cointegrate formation and results in duplication of the IS10.     

Characteristic features of the structure of co-integrating plasmids and simple insertions formed during transposition of the IS1 element in transposon Tn9'

Earlier we have studied unstable dissociating IS1/Tn9'-mediated cointegrates between the plasmids pDK57 (pBR322::Tn9') and pRP3.1, a deletion derivative of RP1, and two types of such cointegrates containing three and four copies of IS1 were revealed. In the present paper we studied the structure of stable IS1/Tn9'-mediates cointegrates and simple insertions formed by interaction between the plasmids pDK57 and pRP3.1 in the E. coli recA- cells. It was shown, that the stable cointegrates were formed by insertion of pDK57 in different loci of pRP3.1 and these cointegrates contain three copies of IS1, i.e. one copy of IS1 and a copy of Tn9' at the junction of the two replicons. The cointegrates are formed predominantly due to the activity of the left copy of Tn9', which occupies a proximal position in regard to the promoter of the cat gene. It was found that the integration of pDK57 into the kan gene region of pRP3.1 leading to the formation of the KmS cointegrates occurs only in one of the two possible orientations. Meanwhile the insertions of the transposon Tn9' into the kan region of pRP3.1 leading to simple insertions occurs in the orientation opposite to the orientation of the transposon in the KmS cointegrates. It is proposed that simple insertions are not the products of direct transposition of Tn9', but they are formed from unstable cointegrates under the action of IS1-specific resolvase.     

Structural and functional organization of the transposon Tn2555 carrying saccharose utilization genes

Transposon Tn2555 was isolated from a clinical E. coli strain carries the genes for sucrose utilization. Previously it was shown that Tn2555 is very unstable and undergoes structural rearrangements with a high frequency. Several deletion derivatives of Tn2555 and one with an inversion of the internal segment were found. They form the Tn2555 transposon family. This paper describes further structural and functional analysis of Tn2555. In the course of the experiments on pBR325 (Mob-) mobilization by conjugative RP4 derivatives, containing Tn2555 family elements, it was found, that all of them induce cointegrate formation. Some of these cointegrates were able to dissociate in rec+ and recA E. coli cells. Restriction endonuclease analysis of the resulting plasmids have shown, that among them were the end products of the Tn2555 transposition from RP4 to pBR325. Besides, the pBR325 derivatives, containing a discrete DNA segment of approximately 800 b.p., originating from Tn2555, were found. The segment can transpose from pBR325 to RP4 indicating that it is an insertion sequence. This new IS-element was designated IS286. The size and the genetic properties of IS286 resemble those of the IS1 element. However restriction analysis and Southern hybridization data show no significant homology between IS286 and IS1. It was found that the Tn2555 family elements are flanked by directly repeated IS286. One of them (Tn2555.3) contains an additional copy of IS286 in its internal region.     

Transposition behavior of IS15 and its progenitor IS15-Δ: Are cointegrates exclusive end products?

We report that the major product of IS15-promoted transposition is a cointegrate. When present in the multicopy plasmid pBR322, IS15 and its progenitor IS15-delta mediate the formation of cointegrates at frequencies of 3.5 X 10(-4) and 2.9 X 10(-5), respectively. We have studied the stability of the cointegrates generated by IS15 and IS15-delta. While these structures are resolved in a rec+ host, they were stable in a rec- host. These observations suggest that neither IS15 nor IS15-delta encode a resolvase and that cointegration is an end product of their transposition process. These properties of IS15-delta and IS15 can explain the transitions from IS15-delta to IS15 and from IS15 to IS15-delta observed in vivo.     

Evolution of Tn21-related transposons: isolation of Tn2425, which harbours IS161

The isolation of two multi-resistance transposons, Tn2425 and Tn1831, and their relation to Tn21 and Tn2424, is described. A 1.7 kb segment present in Tn2424 and Tn2425 was identified as an IS element by rec-independent transposition, resulting in a cointegrate structure that carries two direct repeated copies of the IS element. By the isolation of this IS element we demonstrated that transposition is one mechanism leading to sequence variations in Tn21-like structures, especially in the region between the mer operon and the sul gene.     

Molecular genetic analysis of the Tn5041 transposition system

A study was made of the transposition of the mercury resistance transposon Tn5041 which, together with the closely related toluene degradation transposon Tn4651, forms a separate group in the Tn3 family. Transposition of Tn5041 was host-dependent: the element transposed in its original host Pseudomonas sp. KHP41 but not in P. aeruginosa PAO-R and Escherichia coli K12. Transposition of Tn5041 in these strains proved to be complemented by the transposase gene (tnpA) of Tn4651. The gene region determining the host dependence of Tn5041 transposition was localized with the use of a series of hybrid (Tn5041 x Tn4651) tnpA genes. Its location in the 5'-terminal one-third of the transposase gene is consistent with the data that this region is involved in the formation of the transposition complex in transposons of the Tn3 family. As in other transposons of this family, transposition of Tn5041 occurred via cointegrate formation, suggesting its replicative mechanism. However, neither of the putative resolution proteins encoded by Tn5041 resolved the cointegrates formed during transposition or an artificial cointegrate in E. coli K12. Similar data were obtained with the mercury resistance transposons isolated from environmental Pseudomonas strains and closely related to Tn5041 (Tn5041 subgroup).     

Spontaneous deletion of citrate-utilizing ability promoted by insertion sequences.

The citrate utilization (Cit+) transposon Tn3411 was shown to be flanked by directly repeated sequences (IS3411L and IS3411R) by restriction enzyme analysis and electron microscope observation. Cit- deletion mutants were frequently found to be generated in pBR322::Tn3411 by intramolecular recombination between the two copies of IS3411. The flanking IS3411 elements of Tn3411 were shown to be functional insertion sequences by Tn3411-mediated direct and inverse transposition. Tn3411-mediated inverse transposition from pBR322::Tn3411 to the F-plasmid derivative pED100 occurred more efficiently than that of direct transposition of the Cit+ determinant. This was thought to be due to the differential transposability of IS3411L and IS3411R in the transposition process. The frequency of transposition of IS3411 marked with a chloramphenicol resistance determinant was much higher than IS3411-mediated cointegrate formation, suggesting that replicon fusions are not essential intermediates in the transposition process of Tn3411 or IS3411. Spontaneous deletions occurred with high frequency in recA hosts. The spontaneous deletion promoted by homologous recombination between two IS3411 elements in Tn3411 was examined with deletion mutants.     

Tn4400, a compound transposon isolated from Bacteroides fragilis, functions in Escherichia coli.

Transfer factor pBFTM10, isolated from the obligate anaerobic bacterium Bacteroides fragilis, carries a clindamycin resistance determinant which we have suggested is part of a transposable element. DNA homologous to this determinant is found in many Clnr Bacteroides isolates, either in the chromosome or on plasmids. We have now established that Ccr resides on a transposon, Tn4400. In addition to the Ccr determinant that functions under anaerobic conditions in B. fragilis, Tn4400 also carries a determinant for tetracycline resistance (Tcr) which only functions in Escherichia coli under aerobic conditions. The presence of Tn4400 on pBFTM10 does not confer tetracycline resistance on B. fragilis cells containing it. DNA from pBFTM10 was cloned in E. coli, with pDG5 as the cloning vector, to form pGAT500. Using a mobilization assay involving pGAT500 and an F factor derivative, pOX38, we determined that a 5.6-kilobase region of pBFTM10 DNA was capable of mediating replicon fusion and transposition. Most of the mobilization products resulted from inverse transposition reactions, while some were the result of true cointegrate formation. Analysis of the cointegrate molecules showed that three were formed by the action of one of the ends of Tn4400 (IS4400), and one was formed by the action of the whole element (Tn4400). The cointegrate molecule carrying intact copies of Tn4400 at the junction of the two plasmids could resolve to yield an unaltered donor plasmid (pGAT500) and a conjugal plasmid containing a copy of Tn4400 or a copy of one insertion sequence element (pOX38::Tn4400 or pOX38::IS4400). Thus, Tn4400 is a compound transposon containing active insertion sequence elements as directly repeated sequences at its ends.