5-Aminolevulinate production with recombinant <Emphasis Type="Italic">Escherichia coli</Emphasis> using a rare codon optimizer host strain

The 5-aminolevulinate (ALA) synthase gene (hemA) containing several codons rarely used by Escherichia coli was cloned from the genome of Rhodobacter sphaeroides and optimized in two strains of Escherichia coli: BL21(DE3) and Rosetta(DE3), which is a rare codon optimizer strain. The effects of initial isopropyl-β-d-thiogalactopyranoside (IPTG) concentration, induction time, and temperature on enzyme activity were studied and compared for two strains. The results indicated that the ALA synthase expressed by Rosetta(DE3)/pET-28a(+)-hemA was higher than that by BL21(DE3)/pET-28a(+)-hemA. The initial precursors, glycine and succinate, and initial glucose, which is an inhibitor for both ALA synthase and dehydratase, were observed to be the key factors affecting ALA production. ALA synthase activity was generally higher with Rosetta(DE3) than with BL21(DE3), so was ALA biosynthesis. Based on the optimal culture system using Rosetta(DE3), the yield of ALA achieved 3.8 g/l (29 mM) under the appropriate conditions in fermenter.     

Catalytically active alkaline molten globular enzyme: Effect of pH and temperature on the structural integrity of 5-aminolevulinate synthase

5-Aminolevulinate synthase (ALAS), a pyridoxal-5′phosphate (PLP)-dependent enzyme, catalyzes the first step of heme biosynthesis in mammals. Circular dichroism (CD) and fluorescence spectroscopies were used to examine the effects of pH (1.0–3.0 and 7.5–10.5) and temperature (20 and 37 °C) on the structural integrity of ALAS. The secondary structure, as deduced from far-UV CD, is mostly resilient to pH and temperature changes. Partial unfolding was observed at pH 2.0, but further decreasing pH resulted in acid-induced refolding of the secondary structure to nearly native levels. The tertiary structure rigidity, monitored by near-UV CD, is lost under acidic and specific alkaline conditions (pH 10.5 and pH 9.5/37 °C), where ALAS populates a molten globule state. As the enzyme becomes less structured with increased alkalinity, the chiral environment of the internal aldimine is also modified, with a shift from a 420 nm to 330 nm dichroic band. Under acidic conditions, the PLP cofactor dissociates from ALAS. Reaction with 8-anilino-1-naphthalenesulfonic acid corroborates increased exposure of hydrophobic clusters in the alkaline and acidic molten globules, although the reaction is more pronounced with the latter. Furthermore, quenching the intrinsic fluorescence of ALAS with acrylamide at pH 1.0 and 9.5 yielded subtly different dynamic quenching constants. The alkaline molten globule state of ALAS is catalytically active (pH 9.5/37 °C), although the k_cat value is significantly decreased. Finally, the binding of 5-aminolevulinate restricts conformational fluctuations in the alkaline molten globule. Overall, our findings prove how the structural plasticity of ALAS contributes to reaching a functional enzyme.     

An efficient in vitro refolding of recombinant bacterial laccase in Escherichia coli

Laccases (benzenediol oxygen oxidoreductases, EC 1.10.3.2) are important multicopper enzymes that are used in many biotechnological processes. A recombinant form of laccase from Bacillus sp. HR03 was overexpressed in Escherichia coli BL-21(DE3). Inclusion body (IB) formation happens quite often during recombinant protein production. Hence, developing a protocol for efficient refolding of proteins from inclusion bodies to provide large amounts of active protein could be advantageous for structural and functional studies. Here, we have tried to find an efficient method of refolding for this bacterial enzyme. Solubilization of inclusion bodies was carried out in phosphate buffer pH 7, containing 8 M urea and 4 mM β-mercaptoethanol and refolding was performed using the dilution method. The effect of different additives was investigated on the refolding procedure of denaturated laccase. Mix buffer (phosphate buffer and citrate buffer, 100 mM) containing 4 mM ZnSO₄ and 100 mM sorbitol was selected as an optimized refolding buffer. Also Kinetic parameters of soluble and refolded laccase were analyzed.     

Characterization and PCR application of a new high-fidelity DNA polymerase from Thermococcus waiotapuensis

The family B DNA polymerase gene from the euryarchaeon Thermococcus waiotapuensis (Twa) contains an open reading frame of 4404 bases that encodes 1467 amino acid residues. The gene is split by two intein-coding sequences that forms a continuous open reading frame with the three polymerase exteins. Twa DNA polymerase genes with (whole gene) and without (genetically intein-spliced) inteins were expressed in Escherichia coli Rosetta(DE3)pLysS. The inteins of the expressed whole gene were easily spliced during purification. The molecular mass of the purified Twa DNA polymerase was about 90 kDa, as estimated by SDS-PAGE. The optimal pH for Twa DNA polymerase activity was 6.0 and the optimal temperature was 75 °C. The enzyme was activated by magnesium ions. The half-life of the enzyme at 99 °C was about 4 h. The optimal buffer for PCR with Twa DNA polymerase was 50 mM Tris–HCl (pH 8.2), 2.0 mM MgCl₂, 30 mM KCl, 2.0 mM (NH₄)₂SO₄, 0.01% Triton X-100, and 0.005% BSA. The PCR fidelity of Twa DNA polymerase was higher than Pfu, KOD and Vent DNA polymerases. A ratio of 15:1 Taq:Twa DNA polymerase efficiently facilitated long-range PCR.     

Expression,refolding and purification of a human interleukin-17A variant

A human interleukin-17A (IL-17A) variant was overexpressed in Escherichia coli BL21 (DE3) under the control of a T₇ promoter. The resulting insoluble inclusion bodies were isolated and solubilized by homogenization with 6 M guanidine HCl. The denatured recombinant human IL-17A variant was refolded in 20 mM Tris–HCl, pH 9.0, 500 mM arginine, 500 mM guanidine HCl, 15% glycerol, 1 mM cystamine, and 5 mM cysteine at 2–8 °C for 40 h. The refolded IL-17A variant was subsequently purified using a combination of cation-exchange, reversed-phase and fluoroapatite chromatography. The final purified product was a monodisperse and crystallizable homodimer with a molecular weight of 30,348.3 Da. The protein was active in both receptor binding competition assay and IL-17A-dependent biological activity assay using human dermal fibroblasts.     

Valorization of olive stones for xylitol and ethanol production from dilute acid pretreatment via enzymatic hydrolysis and fermentation by Pachysolen tannophilus

Olive stones are an agro-industrial by-product abundant in the Mediterranean area that is regarded as a potential lignocellulosic feedstock for sugar production. Statistical modeling of dilute-sulphuric acid hydrolysis of olive stones has been performed using a response surface methodology, with treatment temperature and process time as factors, to optimize the hydrolysis conditions aiming to attain maximum d-xylose extraction from hemicelluloses. Thus, solid yield and composition of solid and liquid phases were assessed by empirical modeling. The highest yield of d-xylose was found at a temperature of 195 °C for 5 min. Under these conditions, 89.7% of the total d-xylose was recovered from raw material. The resulting solids from optimal conditions were assayed as substrate for enzymatic hydrolysis, while fermentability of hemicellulosic hydrolysates was tested using the d-xylose-fermenting yeast Pachysolen tannophilus. Both bioprocesses were considerably influenced by enzyme loading and inoculum size. In the enzymatic hydrolysis step, about 56% of cellulose was converted into d-glucose by using an enzyme/solid ratio of 40 FPU g⁻¹, while in the fermentation carried out with a cell concentration of 2 g L⁻¹ a yield of 0.44 g xylitol/g d-xylose and a global volumetric productivity of 0.11 g L⁻¹ h⁻¹ were achieved.     

Cloning,purification and characterization of a thermostable β-galactosidase from Thermotoga naphthophila RUK-10

A novel β-galactosidase gene (Tnap1577) from the hyperthermophilic bacterium Thermotoga naphthophila RUK-10 was cloned and expressed in Escherichia coli BL21 (DE3) cells to produce β-galactosidase. The recombinant β-galactosidase was purified in three steps: heat treatment to deactivate E. coli proteins, Ni-NTA affinity chromatography and Q-sepharose chromatography. The optimum temperatures for the hydrolysis of o-nitrophenyl-β-d-galactoside (o-NPG) and lactose with the recombinant β-galactosidase were found to be 90 °C and 70 °C, respectively. The corresponding optimum pH values were 6.8 and 5.8, respectively. The molecular mass of the enzyme was estimated to be 70 kDa by SDS-PAGE analysis. Thermostability studies showed that the half-lives of the recombinant enzyme at 75 °C, 80 °C, 85 °C and 90 °C were 10.5, 4, 1, and 0.3 h, respectively. Kinetic studies on the recombinant β-galactosidase revealed K_m values for the hydrolysis of o-NPG and lactose of 1.31 mM and 1.43 mM, respectively. These values are considerably lower than those reported for other hyperthermophilic β-galactosidases, indicating high intrinsic affinity for these substrates. The recombinant β-galactosidase from Thermotoga naphthophila RUK-10 also showed transglycosylation activity in the synthesis of alkyl galactopyranoside. This additional activity suggests the enzyme has potential for broader biotechnological applications beyond the degradation of lactose.     

Production of uroporphyrinogen III, which is the common precursor of all tetrapyrrole cofactors, from 5-aminolevulinic acid by Escherichia coli expressing thermostable enzymes

Uroporphyrinogen III (urogen III) was produced from 5-aminolevulinic acid (ALA), which is a common precursor of all metabolic tetrapyrroles, using thermostable ALA dehydratase (ALAD), porphobilinogen deaminase (PBGD), and urogen III synthase (UROS) of Thermus thermophilus HB8. The UROS-coding gene (hemD ₂ ) of T. thermophilus HB8 was identified by examining the gene product for its ability to produce urogen III in a coupled reaction with ALAD and PBGD. The genes encoding ALAD, PBGD, and UROS were separately expressed in Escherichia coli BL21 (DE3). To inactivate indigenous mesophilic enzymes, the E. coli transformants were heated at 70 °C for 10 min. The bioconversion of ALA to urogen III was performed using a mixture of heat-treated E. coli transformants expressing ALAD, PBGD, and UROS at a cell ratio of 1:1:1. When the total cell concentration was 7.5 g/l, the mixture of heat-treated E. coli transformants could convert about 88 % 10 mM ALA to urogen III at 60 °C after 4 h. Since eight ALA molecules are required for the synthesis of one porphyrin molecule, approximately 1.1 mM (990 mg/l) urogen III was produced from 10 mM ALA. The present technology has great potential to supply urogen III for the biocatalytic production of vitamin B₁₂.     

Expression and biochemical analysis of codon-optimized polyphenol oxidase from Camellia sinensis (L.) O. Kuntze in E. coli

Polyphenol oxidases (PPOs) are copper-containing industrially important enzymes that catalyze the synthesis of many commercially important products by using polyphenols as substrate. Camellia sinensis polyphenol oxidase (CsPPO) is interesting because it oxidizes epicatechins to yield theaflavins and thearubigins. The present study aimed to optimize the expression of CsPPO in Escherichia coli. Because CsPPO had a large number of E. coli rare codons, it yielded a poor quantity of protein in E. coli Rosetta™ 2 cells, which have additional tRNAs for E. coli rare codons. Thus, synthetically constructed codon-optimized CsPPO was cloned into pET-47b(+) vector and expressed in a bacterial host. Ectopic expression led to the formation of inclusion bodies. However, extensive standardization of buffers and methods of refolding such as dialysis, on-column refolding, and rapid dilution yielded active PPO from solubilized inclusion bodies with copper content of 0.880 ± 0.095 atom/molecule of protein.Experimental data produced maximum PPO activity in a rapid dilution buffer containing 0.5 M L-arginine. Refolded CsPPO had an optimum pH of 5.0 and K_m values of 3.10, 0.479, and 0.314 mM, and a V_max of 163.9, 82.64, and 142.8 U/mg of protein for catechol, catechin, and epicatechin, respectively.     

Heterologous expression of a newly screened β-agarase from Alteromonas sp. GNUM1 in Escherichia coli and its application for agarose degradation

The gene of agaG1 from Alteromonas sp. GNUM1 encoding a β-agarase (AgaG1) was heterologously expressed in E. coli BL21 (DE3). The recombinant strain was cultured at 37 °C and then AgaG1 was expressed at 25 °C and 0.5 mM IPTG. The optimum conditions for AgaG1 to hydrolyze agarose were pH 7.0 and 40 °C. The main products of agarose hydrolysis by AgaG1 were confirmed to be neoagarobiose and neoagarotetraose. A new agarose hydrolysis process using AgaG1 was developed, in which the reaction temperature was adjusted stepwise to avoid gelation problem with no chemical pretreatment step. The enzyme AgaG1 was found to be very effective and highly selective. When 10.0 g/L agarose was hydrolyzed, 98% of the agarose added was converted to 3.8 and 6.4 g/L of neoagarobiose and neoagarotetraose, respectively.     

Development of robust in vitro RNA-dependent RNA polymerase assay as a possible platform for antiviral drug testing against dengue

NS5 is the largest and most conserved protein among the four dengue virus (DENV) serotypes. It has been the target of interest for antiviral drug development due to its major role in replication. NS5 consists of two domains, the N-terminal methyltransferase domain and C-terminal catalytic RNA-dependent RNA polymerase (RdRp) domain. It is an unstable protein and is prone to inactivation upon prolonged incubation at room temperature, thus affecting the inhibitor screening assays. In the current study, we expressed and purified DENV RdRp alone in Esherichia coli (E. coli) cells. The N-terminally His-tagged construct of DENV RdRp was transformed into E. coli expression strain BL-21 (DE3) pLysS cells. Protein expression was induced with isopropyl-β-D-thiogalactopyranoside (IPTG) at a final concentration of 0.4 mM. The induced cultures were then grown for 20 h at 18 °C and cells were harvested by centrifugation at 6000 x g for 15 min at 4 °C. The recombinant protein was purified using HisTrap affinity column (Ni-NTA) and then the sample was subjected to size exclusion chromatography, which successfully removed the degradation product obtained during the previous purification step. The in vitro polymerase activity of RdRp was successfully demonstrated using homopolymeric polycytidylic acid (poly(rC)) RNA template. This study describes the high level production of enzymatically active DENV RdRp protein which can be used to develop assays for testing large number of compounds in a high-throughput manner. RdRp has the de novo initiation activity and the in vitro polymerase assays for the protein provide a platform for highly robust and efficient antiviral compound screening systems.     

Purification and characterization of recombinant Bacillus subtilis 168 catalase using a basic polypeptide from ribosomal protein L2

An efficient purification system for purifying recombinant Bacillus subtilis 168 catalase (KatA) expressed in Escherichia coli was developed. The basic region containing 252–273 amino acids derived from E. coli ribosomal protein L2 was used as an affinity tag while the small ubiquitin-like modifier (SUMO) was introduced as one specific protease cleavage site between the target protein and the purification tags. L2 (252–273)–SUMO fusion protein purification method can be effectively applied to purify the recombinant catalase using cation exchange resin. This purification procedure was used to purify the KatA and achieved a purification fold of 30.5, a specific activity of 48,227.2 U/mg and an activity recovery of 74.5%. The enzyme showed a Soret peak at 407 nm. The enzyme kept its activity between pH 5 and 10 and between 30 °C and 60 °C, with the highest activity at pH 8.0 and 37 °C. The enzyme displayed an apparent Km of 39.08 mM for hydrogen peroxide. These results agree well with the previous reports about B. subtilis catalase. L2 (252–273)–SUMO fusion protein purification technique provides a novel and effective fusion expression system for the production of recombinant proteins.     

Direct bioconversion of d-xylose to 1,2,4-butanetriol in an engineered Escherichia coli

The compound 1,2,4-butanetriol (BT) is a valuable chemical used in the production of plasticizers, polymers, cationic lipids and other medical applications, and is conventionally produced via hydrogenation of malate. In this report, BT is biosynthesized by an engineered Escherichia coli from d-xylose. The pathway: d-xylose → d-xylonate → 2-keto-3-deoxy-d-xylonate → 3,4-dihydroxybutanal → BT, was constructed in E. coli by recruiting a xylose dehydrogenase and a keto acid decarboxylase from Caulobacter crescentus and Pseudomonas putida, respectively. Authentic BT was detected from cultures of the engineered strain. Further improvement on the strain was performed by blocking the native d-xylose and d-xylonate metabolic pathways which involves disruption of xylAB, yjhH and yagE genes in the host chromosome. The final construct produced 0.88 g L⁻¹ BT from 10 g L⁻¹ d-xylose with a molar yield of 12.82%. By far, this is the first report on the direct production of BT from d-xylose by a single microbial host. This may serve as a starting point for further metabolic engineering works to increase the titer of BT toward industrial scale viability.     

Efficient production of (R)-(−)-mandelic acid with highly substrate/product tolerant and enantioselective nitrilase of recombinant Alcaligenes sp.

For efficient production of (R)-(−)-mandelic acid, a nitrilase gene from Alcaligenes sp. ECU0401 was cloned and overexpressed in Escherichia coli. After simple optimization of the culture conditions, the biocatalyst production was greatly increased from 500 to 7000 U/l. The recombinant E. coli whole cells showed strong tolerance against a high substrate concentration of up to 200 mM, and the concentration of (R)-(−)-mandelic acid after only 4 h of transformation reached 197 mM with an enantiomeric excess (ee_p) of 99%. In a fed-batch reaction with 600 mM mandelonitrile as the substrate, the cumulative production of (R)-(−)-mandelic acid after 17.5 h of conversion reached 520 mM. The recombinant E. coli cells could also be repeatedly used in the biotransformation, retaining 40% of the initial activity after 10 batches of reaction. The highly substrate/product tolerable and enantioselective nature of this recombinant nitrilase suggests that it is of great potential for the practical production of optically pure (R)-(−)-mandelic acid.     

Enzymatic preparation of optically pure t-butyl 6-chloro-(3R,5S)-dihydroxyhexanoate by a novel alcohol dehydrogenase discovered from Klebsiella oxytoca

Alcohol dehydrogenases can catalyze the inter-conversion of aldehydes and alcohols. The t-butyl 6-chloro-(3R,5S)-dihydroxyhexanoate is a key chiral intermediate in the synthesis of statin-type drugs such as Crestor (rosuvastatin calcium) and Lipitor (atorvastatin). Herein, a novel alcohol dehydrogenase (named as KleADH) discovered from Klebsiella oxytoca by a genome mining method was cloned and characterized. The KleADH was functionally overexpressed in Escherichia coli Rosetta (DE3) and the whole cell biocatalyst was able to convert t-butyl 6-chloro-(5S)-hydroxy-3-oxohexanoate to t-butyl 6-chloro-(3R,5S)-dihydroxyhexanoate with more than 99% diastereomeric excess (de) and 99% conversion in 24 h without adding any expensive cofactors. Several factors influencing the whole cell catalyst activity such as temperature, pH, the effects of metal ions and organic solvent were determined. The optimum enzyme activity was achieved at 30 °C and pH 7.0 and it was shown that 1 mM Fe³⁺ can increase the enzyme activity by 1.2 times. N-hexane/water and n-heptane/water biphasic systems can also increase the activity of KleADH. Substrate specificity studies showed that KleADH also exhibited notable activity towards several aryl ketones with high stereoselectivity. Our investigation on this novel alcohol dehydrogenase KleADH reveals a promising biocatalyst for producing chiral alcohols for preparation of valuable pharmaceuticals.     

Metabolic engineering of Escherichia coli for the production of 5-aminovalerate and glutarate as C5 platform chemicals

5-Aminovalerate (5AVA) is the precursor of valerolactam, a potential building block for producing nylon 5, and is a C5 platform chemical for synthesizing 5-hydroxyvalerate, glutarate, and 1,5-pentanediol. Escherichia coli was metabolically engineered for the production of 5-aminovalerate (5AVA) and glutarate. When the recombinant E. coli WL3110 strain expressing the Pseudomonas putida davAB genes encoding delta-aminovaleramidase and lysine 2-monooxygenase, respectively, were cultured in a medium containing 20 g/L of glucose and 10 g/L of l-lysine, 3.6 g/L of 5AVA was produced by converting 7 g/L of l-lysine. When the davAB genes were introduced into recombinant E. coli strainXQ56allowing enhanced l-lysine synthesis, 0.27 and 0.5 g/L of 5AVA were produced directly from glucose by batch and fed-batch cultures, respectively. Further conversion of 5AVA into glutarate could be demonstrated by expression of the P. putida gabTD genes encoding 5AVA aminotransferase and glutarate semialdehyde dehydrogenase. When recombinant E. coli WL3110 strain expressing the davAB and gabTD genes was cultured in a medium containing 20 g/L glucose, 10 g/L l-lysine and 10 g/L α-ketoglutarate, 1.7 g/L of glutarate was produced.     

Chaperone-dependent gene expression of organic solvent-tolerant lipase from Pseudomonas aeruginosa strain S5

The gene coding for the intracellular organic solvent-tolerant lipase of Pseudomonas aeruginosa strain S5 was isolated from a genomic DNA library and cloned into pRSET. The cloned sequence included two open reading frames (ORF) of 1575 bp for the first ORF (ORF1), and 582 bp for the second ORF (ORF2). The ORF2, known as chaperone, plays an important role in the expression of the S5 gene. The ORF2 is located downstream of lipase gene, and functions as the act gene for ORF1. The conserved pentapeptide, Gly-X-Ser-X-Gly, is located in the ORF1. A sequence coding for a catalytic triad that resembles that of a serine protease, consisting of serine, histidine, and aspartic acid or glutamic acid residues, was present in the lipase gene. Expression of the S5 lipase gene in E. coli resulted in a 100-fold increase in enzyme activity 9 h after induction with 0.75 mM IPTG. The recombinant protein revealed a size of 60 kDa on SDS-PAGE. The Lip S5 gene was stable in the presence of 25% (v/v) n-dodecane and n-tetradecane after 2 h incubation at 37 °C.     

Construction of recombinant Escherichia coli for enhanced bioconversion of colchicine into 3-demethylated colchicine at 70 l bioreactor level

A recombinant strain of Escherichia coli with CYP102A1 gene was developed for the demethylation of colchicine into their derivatives. The CYP102A1 gene responsible for demethylation was isolated from Bacillus megaterium ACBT03 and amplified using suitable primers. The amplified product was cloned into pET28a+ expression vector using host E. coli BL21(DE3) cells. The CYP3A4 (product of CYP102A1 gene) protein expression and other parameters like substrate toxicity, product toxicity and enzyme activity were optimized in shake flasks; and further scaled-up to 5 l bioreactor with 3 l working volume. In 5 l bioreactor, dissolved oxygen (DO) was optimized for maximum specific growth and enhanced 3-demethylated colchicine (3-DMC) production. The optimized conditions from shake flasks were scaled-up to 70 l bioreactor and resulted into ∼80% conversion of 20 mM colchicine in 48 h with a volumetric productivity of 6.62 mg l⁻¹ h⁻¹. Scale-up factors were measured as volumetric oxygen transfer coefficient (k_La) i.e., 56 h⁻¹ and impeller tip velocity (V_tip) i.e., 7.065 m s⁻¹, respectively. The kinetic parameters K_m, k_cat, and k_cat/K_m of the CYP3A4 enzyme using colchicine as the substrate were determined to be 271 ± 30 μM, 8533 ± 25 min⁻¹, and 31.49 μM min⁻¹, respectively, when IPTG induced recombinant E. coli culture was used.     

5-Aminolevulinic acid production in engineered Corynebacterium glutamicum via C5 biosynthesis pathway

ALA (5-aminolevulinic acid) is an important intermediate in the synthesis of tetrapyrroles and the use of ALA has been gradually increasing in many fields, including medicine and agriculture. In this study, improved biological production of ALA in Corynebacterium glutamicum was achieved by overexpressing glutamate-initiated C₅ pathway. For this purpose, copies of the glutamyl t-RNA reductase HemA from several bacteria were mutated by site-directed mutagenesis of which a HemA version from Salmonella typhimurium exhibited the highest ALA production. Cultivation of the HemA-expressing strain produced approximately 204 mg/L of ALA, while co-expression with HemL (glutamate-1-semialdehyde aminotransferase) increased ALA concentration to 457 mg/L, representing 11.6- and 25.9-fold increases over the control strain (17 mg/L of ALA). Further effects of metabolic perturbation were investigated, leading to penicillin addition that further improves ALA production to 584 mg/L. In an optimized flask fermentation, engineered C. glutamicum strains expressing the HemA and hemAL operon produced up to 1.1 and 2.2 g/L ALA, respectively, under glutamate-producing conditions. The final yields represent 10.7- and 22.0-fold increases over the control strain (0.1 g/L of ALA). From these findings, ALA biosynthesis from glucose was successfully demonstrated and this study is the first to report ALA overproduction in C. glutamicum via metabolic engineering.