Probing the coordination properties of glutathione with transition metal ions (Cr2+,Mn2+,Fe2+,Co2+, Ni2+,Cu2+,Zn2+,Cd2+,Hg2+) by density functional theory

Complexes formed by reduced glutathione (GSH) with metal cations (Cr²⁺, Mn²⁺,Fe²⁺,Co²⁺,Ni²⁺,Cu²⁺,Zn²⁺,Cd²⁺,Hg²⁺) were systematically investigated by the density functional theory (DFT). The results showed that the interactions of the metal cations with GSH resulted in nine different stable complexes and many factors had an effect on the binding energy. Generally, for the same period of metal ions, the binding energies ranked in the order of Cu²⁺>Ni²⁺>Co²⁺>Fe²⁺>Cr²⁺>Zn²⁺>Mn²⁺; and for the same group of metal ions, the general trend of binding energies was Zn²⁺>Hg²⁺>Cd²⁺. Moreover, the amounts of charge transferred from S or N to transition metal cations are greater than that of O atoms. For Fe²⁺,Co²⁺,Ni²⁺,Cu²⁺,Zn²⁺,Cd²⁺ and Hg²⁺ complexes, the values of the Wiberg bond indices (WBIs) of M-S (M denotes metal cations) were larger than that of M-N and M-O; for Cr²⁺ complexes, most of the WBIs of M-O in complexes were higher than that of M-S and M-N. Furthermore, the changes in the electron configuration of the metal cations before and after chelate reaction revealed that Cu²⁺, Ni²⁺,Co²⁺ and Hg²⁺ had obvious tendencies to be reduced to Cu⁺,Ni⁺,Co⁺ and Hg⁺ during the coordination process.     

Alkaline phosphatase conductometric biosensor for heavy-metal ions determination

Alkaline phosphatase conductometric biosensors consisting of interdigitated gold electrodes and enzyme membranes have been used for assessment of heavy-metal ions in water. These analytes act as enzyme inhibitors. Enzyme residual activity has been measured in Tris-nitrate buffer without metal preincubation in the presence of Mg²⁺ ions as activator. The results indicate that the toxicity of the various metals tested toward immobilized phosphatase is ranged as follows: Cd²⁺ > Co²⁺ > Zn²⁺ > Ni²⁺ > Pb²⁺. Detection limits were about 0.5 ppm for Cd²⁺, 2 ppm for both Zn²⁺ and Co²⁺, 5 ppm for Ni²⁺ and 40 ppm for lead ions. In addition, the responses during 10 h were stable (RSD 4%) and a drift of about 7% per day was observed. The storage stability in buffer solution at 4 °C remained stable for more than one month.     

Single-step purification of recombinant green fluorescent protein on expanded beds of immobilized metal affinity chromatography media

Immobilized metal ion affinity chromatography (IMAC) in expanded bed mode is used for purifying recombinant green fluorescent protein (GFP) overexpressed in Escherichia coli. The purification is carried out on two different matrices, i.e. Ni²⁺ Streamline™ and Ni²⁺ cross-linked alginate beads. The binding isotherms to both IMAC media followed the Langmuir model. The maximum binding capacity (q_max) of Ni²⁺ Streamline™ and Ni²⁺ cross-linked alginate for the GFP was 1,42,860 FU ml⁻¹ and 18,000 FU ml⁻¹, respectively. The expanded bed column chromatography using Ni²⁺ Streamline™ gave 2.7-fold purification with 89% of GFP recovery, while Ni²⁺ alginate gave 3.1-fold purification with 91% of GFP recovery. SDS-PAGE of purified GFP in both cases showed single band. The results obtained in the expanded bed chromatography are compared with those obtained in packed bed chromatography.     

Adsorption of Cu(II), Cd(II), and Pb(II) from aqueous single metal solutions by succinylated mercerized cellulose modified with triethylenetetramine

This study describes the preparation of two new chelating materials derived from succinylated mercerized cellulose (cell 1). Cell 1 was activated through two different methods by using diisopropylcarbodiimide and acetic anhydride (to form an internal anhydride) and reacted with triethylenetetramine in order to obtain cell 2 and 4. New modified celluloses were characterized by mass percent gain, concentration of amine functions, elemental analysis, and infrared spectroscopy. Cell 2 and 4 showed degrees of amination of 2.8 and 2.3 mmol/g and nitrogen content of 6.07% and 4.61%, respectively. The capacity of cell 2 and 4 to adsorb Cu²⁺, Cd²⁺, and Pb²⁺ ions from single aqueous solutions were examined. The effect of contact time, pH, and initial concentration of metal ions on the metal ions uptake was also investigated. Adsorption isotherms were well fitted by the Langmuir model. The maximum adsorption capacity of cell 2 and 4 were found to be 56.8 and 69.4 mg/g for Cu²⁺; 68.0 and 87.0 mg/g for Cd²⁺; and 147.1 and 192.3 mg/g for Pb²⁺, respectively.     

Resistance and bioaccumulation of Cd2+, Cu2+, Co2+ and Mn2+ by thermophilic bacteria, Geobacillus thermantarcticus and Anoxybacillus amylolyticus

In this study, bioaccumulation and heavy metal resistance of Cd²⁺, Cu²⁺, Co²⁺ and Mn²⁺ ions by thermophilic Geobacillus thermantarcticus and Anoxybacillus amylolyticus was investigated. The bacteria, in an order with respect to metal resistance from the most resistant to the most sensitive, was found to be Mn²⁺ > Co²⁺ > Cu²⁺ > Cd²⁺ for both G. thermantarcticus and A. amylolyticus. It was determined that the highest metal bioaccumulation was performed by A. amylolyticus in Mn²⁺ (28,566 μg/g dry weight), and the lowest metal bioaccumulation was performed by A. amylolyticus in Co²⁺ (327.3 μg/g dry weight). The highest Cd²⁺ capacities of dried cell membrane was found to be 36.07 and 39.55 mg/g membrane for G. thermantarticus and A. amylolyticus, respectively, and the highest Cd²⁺ capacities of wet cell membrane was found to be 14.36 and 12.39 mg/g membrane for G. thermantarcticus and A. amylolyticus, respectively.     

Adsorption of Cu(II), Cd(II), and Pb(II) from aqueous single metal solutions by mercerized cellulose and mercerized sugarcane bagasse chemically modified with EDTA dianhydride (EDTAD)

This work describes the preparation of new chelating materials derived from cellulose and sugarcane bagasse for adsorption of Cu²⁺, Cd²⁺, and Pb²⁺ ions from aqueous solutions. The first part involved the mercerization treatment of cellulose and sugarcane bagasse with NaOH 5 mol/L. Non- and mercerized cellulose and sugarcane bagasse were then reacted with ethylenediaminetetraacetic dianhydride (EDTAD) in order to prepare different chelating materials. These materials were characterized by mass percent gain, X-ray diffraction, FTIR, and elemental analysis. The second part consisted of evaluating the adsorption capacity of these modified materials for Cu²⁺, Cd²⁺, and Pb²⁺ ions from aqueous single metal solutions, whose concentration was determined by atomic absorption spectroscopy. These materials showed maximum adsorption capacities for Cu²⁺, Cd²⁺, and Pb²⁺ ions ranging from 38.8 to 92.6 mg/g, 87.7 to 149.0 mg/g, and 192.0 to 333.0 mg/g, respectively. The modified mercerized materials showed larger maximum adsorption capacities than modified non-mercerized materials.     

Optimization of Cd2+ removal by the cyanobacterium Synechocystis pevalekii using the response surface methodology

Response surface methodology (RSM) has been used to optimize the critical parameters responsible for higher Cd²⁺ removal by a unicellular cyanobacterium Synechocystis pevalekii. A three-level Box–Behnken factorial design was used to optimize pH, biomass and metal concentration for Cd²⁺ removal. A coefficient of determination (R²) value (0.99), model F-value (86.40) and its low p-value (F < 0.0001) along with lower value of coefficient of variation (5.61%) indicated the fitness of response surface quadratic model during the present study. At optimum pH (6.48), biomass concentration (0.25 mg protein ml^?1) and metal concentration (5 μg ml^?1) the model predicted 4.29 μg ml^?1 Cd²⁺ removal and experimentally, 4.27 μg ml^?1 Cd²⁺ removal was obtained.     

Enhanced d-hydantoinase activity performance via immobilized cobalt ion affinity membrane and its kinetic study

Various immobilized metal ions affinity membranes (IMAMs) were prepared from the regenerated cellulose membrane (RC membrane) and chelated with various metal ions such as Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺. The D-hydantoin-hydrolyzing enzyme (DHTase) harboring a poly-His tagged residue was used as a model protein to be immobilized on the prepared IMAMs through the direct metal–protein interaction forces. The adsorption isotherm and the kinetic parameters V_max, K_m,app of DHTase on IMAMs were studied. The cobalt ions chelated IMAM (Co-IMAM) was found to yield the highest specific activity of DHTase. Under the immobilization condition, the cobalt ion chelated amount was 161.4 ± 4.7 μmol/disk with a DHTase activity of 4.1 ± 0.1 U/disk. As compared to the free DHTase, the immobilized DHTase membrane could achieve a broader pH tolerance and higher thermal stability. In addition, 98% of the residual activity could be retained for 7-times repeated use. Only little activity loss was observed within 36-day storage at 4 °C. This is the first report concerning about using cobalt ion as the effective chelated metal ion for simultaneous purification and immobilization operation.     

Effect of nickel,copper, and zinc on emulsifier production and saturation of cellular fatty acids in the filamentous fungus Curvularia lunata

In the first step of this investigation the toxicity of Ni²⁺, Cu²⁺, and Zn²⁺ ions to the emulsifier producing strain of Curvularia lunata was assessed. Among all the heavy metals studied, Ni²⁺ ions were found to be the most toxic to C. lunata, whereas Zn²⁺ ions exhibited the lowest toxicity. Moreover, only Ni²⁺, when used at sublethal concentration (5 mM) caused lysis of some hyphal tip cells after a short-term exposure (5 h). In the next step, emulsifier production, accumulation of heavy metals by mycelia and emulsifier as well as saturation of cellular fatty acids were examined in 48-h-old cultures where fungal growth intensity was not inhibited by heavy metals (in the presence of Ni²⁺, Cu²⁺, and Zn²⁺ ions at the initial concentration of 1, 5, and 15 mM, respectively) and in cultures where approximately 50% biomass inhibition occurred (in the presence of Ni²⁺, Cu²⁺, and Zn²⁺ ions at the initial concentrations of 3, 10, and 17.5 mM, respectively). Among all the heavy metals studied only Ni²⁺ ions did not induce emulsifier production. As compared with the control, only biomass treated with Ni²⁺ ions displayed an increase in total lipid saturation. This effect resulted mainly from the decrease in linoleic acid (18:2) content correlated with the increase in the amount of stearic acid (18:0). The possible mechanisms by which Ni²⁺ ions could alter the fatty acid profile of C. lunata and the protective role of the emulsifier were also discussed.     

Purification and characterization of aminopeptidase B from goat brain

Aminopeptidase B was purified from goat brain with a purification fold of ～280 and a yield of 2.7%. The enzyme revealed a single band on both native acrylamide gel and SDS-PAGE thereby confirming apparent homogeneous preparation and its monomeric nature. The enzyme exhibited a molecular mass of 80.2 kDa and 79.7 kDa on Sephadex G-200 and SDS-PAGE respectively. The pH optimum was 7.4 and the enzyme was stable between pH 6.0 and 9.0. l-Arg-βNA was the most rapidly hydrolyzed substrate followed by Lys-βNA. The K_m value with Arg-βNA was found to be 0.1 mM. Metal chelating and –SH reactive agents strongly inhibited the enzyme activity. 1,10-Phenanthroline exhibited mixed type of inhibition with a K_i of 5 × 10^?5 M. The enzyme was highly sensitive to urea. Metal ions like Ni²⁺, Cd²⁺, Fe²⁺and Hg²⁺ inhibited the enzyme, whereas Co²⁺, Zn²⁺, Mn²⁺and Sn²⁺ slightly activated the enzyme.     

Purification and biochemical properties of an extracellular acid phytase produced by the Saccharomyces cerevisiae CY strain

An extracellular acid phytase was purified to homogeneity from the culture supernatant of the Saccharomyces cerevisiae CY strain by ultrafiltration, DEAE-Sepharose column chromatography, and Sephacryl S-300 gel filtration. The molecular weight of the purified enzyme was estimated to be 630 kDa by gel filtration. Removing the sugar chain by endoglycosidase H digestion revealed that the molecular mass of the protein decreased to 446 kDa by gel filtration and gave a band of 55 kDa by SDS-PAGE. The purified enzyme was most active at pH 3.6 and 40 °C and was fairly stable from pH 2.5 to 5.0. The phytase displayed broad substrate specificity and had a K_m value of 0.66 mM (sodium phytate, pH 3.6, 40 °C). The phytase activity was completely inhibited by Fe³⁺ and Hg²⁺, and strongly inhibited (maximum of 91%) by Ba²⁺, Co²⁺, Cu⁺, Cu²⁺, Fe²⁺, Mg²⁺, and Sn²⁺ at 5 mM concentrations.     

Purification and characterization of a nitroreductase from the soil bacterium Streptomyces mirabilis

A NADH-dependent nitroreductase from an efficient nitro-reducing soil bacterium, Streptomyces mirabilis DUT001, was isolated and characterized. The enzyme was purified to near homogeneity using ammonium sulfate precipitation, ion exchange chromatography, and gel filtration chromatography. The native enzyme was estimated by gel filtration to have a molecular weight of 68 kDa, and its subunit molecular weight determined by SDS-PAGE was about 34 kDa, which indicated this enzyme was a dimer. Polycyclic nitroaromatic compounds were preferred substrates for this enzyme. The purified enzyme exhibited maximum activity at pH 7.5 and 40 °C. The addition of various chemicals such as reducing agents, metal ions, and chelating agents, had effects on enzyme activity. Mg²⁺, Ca²⁺, Sr²⁺, and 1% (w/v) Triton X-100 increased activity. However, Hg²⁺, Co²⁺, Ni²⁺, Cu²⁺, and SDS reduced activity. The maximum reaction rate (V_max) was 64 μM min^?1 mg^?1 enzyme and the apparent Michaelis–Menten constants (K_m) for 4-nitro-1,8-naphthalic anhydride and NADH were 276 and 29 μM, respectively. Menadione, bimethylenebis, sodium benzoate, and antimycin A were inhibitors of the purified nitroreductase with apparent inhibition constants (K_is) of 20, 36, 44 and 80 μM, respectively.     

The production of a cold-induced extracellular biopolymer by Pseudomonas fluorescens BM07 under various growth conditions and its role in heavy metals absorption

The psychrotrophic bacterium Pseudomonas fluorescens BM07 was induced to excrete an extracellular biopolymer when cells were grown aerobically at 10 °C and its secretion was inhibited at 30 °C. The biopolymer was easily torn apart from the cells by using a shear force under centrifugation (8700 × g, 30 min) and collected as a well-separated mucoid layer in centrifuge tube. The production of the biopolymer was affected by factors such as the types of carbon and nitrogen sources, temperature, and pH. The best production of 2.5 g/l was obtained when the cells were grown on M1 medium containing 70 mM sucrose and 0.2% (w/v) Casamino Acids. In Kings B enriched medium a maximum biopolymer production of up to 3.4 g/l and growth rate of 2.1 g/l, were achieved using 1:1 ratio of C/N. Addition of NaCl and ethanol to the medium led to a decrease in biopolymer production and growth rate of BM07 strain. FT-IR spectroscopy demonstrated the presence of carboxyl, amine, hydroxyl and methoxyl functional groups in the biopolymer. BM07 biopolymer showed high ion binding capacity with particular preference to uptake cadmium and mercury (∼45 and 70%, respectively). The percentage removal of cobalt, zinc, nickel and copper cations were between 20 and 30%. Overall ion uptake by BM07 biopolymer showed a definite preference for larger over smaller cations (Hg > Cd > Ni > Zn > Cu > Co).     

Synthesis of water-soluble dinuclear metal complexes [metal = cobalt(II) and nickel(II)] and their behavior in solution

Two dinuclear metal complexes, [Co₂(bhmp)(MeCO₂)₂]ClO₄ · 2H₂O (1) and [Ni₂(bhmp)(MeCO₂)₂]ClO₄ · 2H₂O (2), were synthesized with a dinucleating ligand, 2,6-bis[bis(2-hydroxyethyl)aminomethyl]-4-methylphenol [H(bhmp)]. Both complexes were easily soluble in water as well as in DMF. Electronic spectra for both complexes were measured in both solvents and analyzed using the angular overlap model (AOM). From the electronic spectra and molar conductance, both complexes were determined to exist as [M₂(bhmp)(MeCO₂)₂]⁺ (M = Co^II or Ni^II) in DMF, dissociating perchlorate ions. On the other hand, in water, it was concluded that the acetate ions were partially dissociated and each complex existed as a mixture of some dissociated species, such as [M₂(bhmp)(MeCO₂)(H₂O)₂]²⁺ and [M₂(bhmp)(H₂O)₄]³⁺ (M = Co^II or Ni^II). Such dissociation was also confirmed by precipitation of the dissociated species when NaBPh₄ was added into an aqueous solution of the nickel complex.     

A micro-scale method for determining relative metal-binding affinities of proteins

This article describes a quick and easy method for determining relative binding affinities between proteins and metal ions. The method is based on separating unbound metal ions from metal ions bound to protein by ultrafiltration using microcentrifuge ultrafiltration units. Bovine serum albumin (BSA) was used as the test protein and the relative affinity towards divalent metal ions was found to be Cu²⁺>Zn²⁺>Cd²⁺>Pb²⁺>Ni²⁺>Co²⁺, which corresponds to the relative orders reported in the literature.     

Purification and characterization of an intracellular esterase from a Fusarium species capable of degrading dimethyl terephthalate

Esterase is the key enzyme involved in microbial degradation of phthalate esters (PAEs). In this study, an intracellular esterase was purified from a coastal sediment fungus Fusarium sp. DMT-5-3 capable of utilizing dimethyl terephthalate (DMT) as a substrate. The purified enzyme is a polymeric protein consisting of two identical subunits with a molecular mass of about 84 kDa. The enzyme showed a maximum esterase activity at 50 °C and was stable below 30 °C. The optimal pH was 8.0 and the enzyme was stable between pH 6.0 and 10.0. The esterase activity was inhibited by Cr³⁺, Hg²⁺, Cu²⁺, Zn²⁺, Ni²⁺, and Cd²⁺. Substrate specificity analysis showed that the enzyme was specific to DMT hydrolysis, but had no effect on other isomers of dimethyl phthalate esters (DMPEs) or monomethyl phthalate esters (MMPEs). These findings suggest that the phthalate esterase produced by Fusarium sp. DMT-5-3 is inducible and distinctive esterases involved in hydrolysis of the two carboxylic ester linkages of DMPEs.     

Removing heavy metals from synthetic effluents using “kamikaze” Saccharomyces cerevisiae cells

One key step of the bioremediation processes designed to clean up heavy metal contaminated environments is growing resistant cells that accumulate the heavy metals to ensure better removal through a combination of biosorption and continuous metabolic uptake after physical adsorption. Saccharomyces cerevisiae cells can easily act as cation biosorbents, but isolation of mutants that are both hyperaccumulating and tolerant to heavy metals proved extremely difficult. Instead, mutants that are hypersensitive to heavy metals due to increased and continuous uptake from the environment were considered, aiming to use such mutants to reduce the heavy metal content of contaminated waters. In this study, the heavy metal hypersensitive yeast strain pmr1∆ was investigated for the ability to remove Mn²⁺, Cu²⁺, Co²⁺, or Cd²⁺ from synthetic effluents. Due to increased metal accumulation, the mutant strain was more efficient than the wild-type in removing Mn²⁺, Cu²⁺, or Co²⁺ from synthetic effluents containing 1–2 mM cations, with a selectivity $ {\text{Mn}}^{{{\text{2}} + }} > {\text{Co}}^{{{\text{2}} + }} ~ > {\text{Cu}}^{{{\text{2}} + }} $ {\text{Mn}}^{{{\text{2}} + }} > {\text{Co}}^{{{\text{2}} + }} ~ > {\text{Cu}}^{{{\text{2}} + }} and also in removing Mn²⁺ and Cd²⁺ from synthetic effluents containing 20–50 μM cations, with a selectivity Mn²⁺ > Cd²⁺.     

Heavy metal uptake by intact cells and protoplasts of Aureobasidium pullulans

Protoplasts prepared from yeast-like cells, hyphae and chlamydospores of Aureobasidium pullulans can take up heavy metals such as Zn²⁺, Co²⁺, Cd²⁺ and Cu²⁺. In relation to intact cells, the sensitivity of protoplasts to Cu²⁺ and Cd²⁺ was increased although chlamydospore protoplasts were more tolerant than yeast-like cell protoplasts. Surface binding of metals was reduced in protoplasts as compared with intact cells and this reduction was particularly evident for chlamydospore protoplasts. At the highest concentrations used, uptake of Zn²⁺, Co²⁺ and Cd²⁺ by yeast-like cell protoplasts was greater than that observed in intact cells which may have been due to toxicity, especially for Cd²⁺, resulting in increased membrane permeability, though for Zn²⁺ and Co²⁺ some barrier effect of the cell wall could not be completely discounted. Chlamydospore protoplasts were capable of intracellular metal uptake, unlike intact chlamydospores, and for Zn²⁺, uptake appeared to be via a different system less specific than that of the other cell types. For chlamydospores, the use of protoplasts confirmed the importance of the cell wall in preventing entry of metal ions into the cell.     

Copper toxicity and sulfur metabolism in Chinese cabbage are affected by UV radiation

Biomass production, dry matter content, specific leaf area and pigment content of Chinese cabbage were all quite similar, when plants were grown in the absence or presence of UV-A + B (2.2 mW cm⁻²). Elevated Cu²⁺ concentrations (2–10 μM) in the root environment and UV radiation had negative synergistic effects for Chinese cabbage and resulted in a more rapid and stronger decrease in plant biomass production and pigment content. The quantum yield of photosystem II photochemistry (F_v/F_m) was only decreased at ≥5 μM Cu²⁺ in the presence of UV radiation, when leaf tissue started to become necrotic. The enhanced Cu toxicity in the presence of UV was largely due to a UV-induced enhanced accumulation of Cu in both roots and shoots. An enhanced Cu content strongly affected the uptake and assimilation of sulfur in plants. The total sulfur content of the root increased at ≥2 μM Cu²⁺ in presence of UV and at 10 μM Cu²⁺ in absence of UV and that of the shoot increased at ≥2 μM Cu²⁺ in presence of UV and at ≥5 μM Cu²⁺ in absence of UV. In the shoot it could be attributed mainly to an increase in sulfate content. Moreover, there was a strong increase in the water-soluble non-protein thiol content upon Cu²⁺ exposure in the root and, to a lesser extent in the shoot, both in the presence and absence of UV. The regulation of the uptake of sulfate responded to the occurrence of Cu toxicity directly, since it was more rapidly affected in the presence than in the absence of UV radiation. For instance, the expression and activity of the high affinity sulfate transporter, Sultr1;2, were enhanced at ≥2 μM in the presence of UV, and at ≥5 μM Cu²⁺ in the absence of UV. In the shoot, the expression of the vacuolar sulfate transporter, Sultr4;1, was upregulated at ≥5 μM Cu²⁺ in the presence and absence of UV whilst the expression of a second vacuolar sulfate transporter, Sultr4;2, was upregulated at 10 μM Cu²⁺ in the presence of UV. It is suggested that high Cu tissue levels may interfere/react with the signal compounds involved in the regulation of expression and activity of sulfate transporters. The expression of adenosine 5′-phosphosulfate reductase in the root was hardly affected and was slightly down-regulated at 2 μM in the presence of UV and at 10 μM in the absence of UV. The expression and activity of sulfate transporters were enhanced upon exposure at elevated Cu²⁺ concentrations; this may not be simply due to a greater sulfur demand at higher Cu levels, but more likely is the consequence of Cu toxicity, since it occurred more rapidly in the presence compared to the absence of UV.     

Cadmium-induced formation of sulphide and cadmium sulphide particles in the aquatic hyphomycete Heliscus lugdunensis

Freshwater fungi which can survive under metal exposure receive increasing scientific attention. Enhanced synthesis of sulphide and glutathione but no phytochelatin synthesis in response to cadmium (up to 80 μM Cd²⁺ in the medium) was measured in the aquatic hyphomycete Heliscus lugdunensis. Up to 25 μmol g⁻¹ dry mass the fungus formed sulphide in an exponentially Cd²⁺-concentration-dependent manner. Using light microscopy, precipitates were observed outside of the hyphae which could be determined as amorphous particles by X-ray diffraction (XRD). Energy dispersive X-ray spectroscopy (EDS) analysis indicated that these particles were mainly composed of Cd and S with an atomic ratio of 1:1, but some elements of the culture medium such as P and Cl were also present. Fungal cells exposed to Cd²⁺ accumulated 12–28 μmol metal g⁻¹ dry mass over a period of 7–28 days. The results may indicate that sulphide could sequester excess Cd²⁺ under oxygen deprived conditions and thereby reduce its toxicity via an additional avoidance mechanism of this fungus.