Sequence-enabled reassembly of beta-lactamase (SEER-LAC): a sensitive method for the detection of double-stranded DNA

This work describes the development of a new methodology for the detection of specific double-stranded DNA sequences. We previously showed that two inactive fragments of green fluorescent protein, each coupled to engineered zinc finger DNA-binding proteins, were able to reassemble an active reporter complex in the presence of a predefined DNA sequence. This system, designated sequence-enabled reassembly (SEER), was demonstrated in vitro to produce a DNA-concentration-dependent signal. Here we endow the SEER system with catalytic capability using the reporter enzyme TEM-1 beta-lacatamase. This system could distinguish target DNA from nontarget DNA in less than 5 min, representing a more than 1000-fold improvement over our previous SEER design. A single base-pair substitution in the DNA binding sequence reduced the signal to nearly background levels. Substitution of a different custom zinc finger DNA-binding domain produced a signal only on the new cognate target. Signal intensity was not affected by genomic DNA when present in equal mass to the target DNA. These results present SEER as a rapid and sensitive method for the detection of double-stranded DNA sequences.     

CRISPR-based DNA and RNA detection with liquid-liquid phase separation

The ability to detect specific nucleic acid sequences allows for a wide range of applications such as the identification of pathogens, clinical diagnostics, and genotyping. CRISPR-Cas proteins Cas12a and Cas13a are RNA-guided endonucleases that bind and cleave specific DNA and RNA sequences, respectively. After recognition of a target sequence, both enzymes activate indiscriminate nucleic acid cleavage, which has been exploited for sequence-specific molecular diagnostics of nucleic acids. Here, we present a label-free detection approach that uses a readout based on solution turbidity caused by liquid-liquid phase separation (LLPS). Our approach relies on the fact that the LLPS of oppositely charged polymers requires polymers to be longer than a critical length. This length dependence is predicted by the Voorn-Overbeek model, which we describe in detail and validate experimentally in mixtures of polynucleotides and polycations. We show that the turbidity resulting from LLPS can be used to detect the presence of specific nucleic acid sequences by employing the programmable CRISPR-nucleases Cas12a and Cas13a. Because LLPS of polynucleotides and polycations causes solutions to become turbid, the detection of specific nucleic acid sequences can be observed with the naked eye. We furthermore demonstrate that there is an optimal polynucleotide concentration for detection. Finally, we provide a theoretical prediction that hints towards possible improvements of an LLPS-based detection assay. The deployment of LLPS complements CRISPR-based molecular diagnostic applications and facilitates easy and low-cost nucleotide sequence detection.     

Detection of toxic chemicals with high sensitivity by measuring the quantity of induced P450 mRNAs based on surface plasmon resonance

In this study we describe a novel sensor system to detect toxic chemicals based on measurement of the quantity of Saccharomyces cerevisiae P450 mRNAs induced by them. Detection was conducted using a flow-injection-type sensor system based on surface plasmon resonance (SPR). The DNA and peptide nucleic acid (PNA) probes containing a complementary sequence to a part of P450 mRNA were immobilized on the sensor chip and the P450 mRNAs hybridized to the probes were quantified. We succeeded in detecting 10 ng/L (10 ppt) of atrazine using both DNA and PNA probes. Using this sensor system, we were able to detect bisphenol A in addition to atrazine. Furthermore, we achieved higher sensitivity by amplifying the target P450 mRNA based on nucleic acid sequence-based amplification (NASBA). This method allows for sensitive, rapid, and easy detection of some toxic chemicals.     

Application of peptide nucleic acid to the direct detection of deoxyribonucleic acid amplified by polymerase chain reaction.

Double-stranded DNA amplified by polymerase chain reaction (PCR) was detected by peptide nucleic acid (PNA) using a BIAcore 2000 biosensor based on surface plasmon resonance (SPR). PNA is an artificial oligo amide that is capable of forming highly stable complexes with complementary oligonucleotides. We succeeded in the direct detection of double-stranded DNA, amplified by PCR with high-sequence specificity. It was shown that the target DNA was available for detection over the range of 40-160 nM. Therefore, the detection limit was 7.5 pmol of the target DNA (143 bases, applied volume 30 microliters). Our DNA detection system, the combination of BIAcore and the probe PNA, could detect the target DNA with good reproducibility. In this report, we show that our system is a powerful tool for the diagnosis of pathologically significant DNA.     

Detection of viral infection and gene expression in clinical tissue specimens using branched DNA (bDNA) in situ hybridization.

In situ hybridization (ISH) methods for detection of nucleic acid sequences have proved especially powerful for revealing genetic markers and gene expression in a morphological context. Although target and signal amplification technologies have enabled researchers to detect relatively low-abundance molecules in cell extracts, the sensitive detection of nucleic acid sequences in tissue specimens has proved more challenging. We recently reported the development of a branched DNA (bDNA) ISH method for detection of DNA and mRNA in whole cells. Based on bDNA signal amplification technology, bDNA ISH is highly sensitive and can detect one or two copies of DNA per cell. In this study we evaluated bDNA ISH for detection of nucleic acid sequences in tissue specimens. Using normal and human papillomavirus (HPV)-infected cervical biopsy specimens, we explored the cell type-specific distribution of HPV DNA and mRNA by bDNA ISH. We found that bDNA ISH allowed rapid, sensitive detection of nucleic acids with high specificity while preserving tissue morphology. As an adjunct to conventional histopathology, bDNA ISH may improve diagnostic accuracy and prognosis for viral and neoplastic diseases.     

A rapid, sensitive, and selective bioluminescence resonance energy transfer (BRET)-based nucleic acid sensing system

Here we report the design of a bioluminescence resonance energy transfer (BRET)-based sensing system that could detect nucleic acid target in 5 min with high sensitivity and selectivity. The sensing system is based on adjacent binding of oligonucleotide probes labeled with Renilla luciferase (Rluc) and quantum dot (Qd) on the nucleic acid target. Here Rluc, a bioluminescent protein that generates light by a chemical reaction, is employed as an energy donor, and a quantum dot is used as an energy acceptor. Bioluminescence emission of Rluc overlaps with the Qd absorption whereas the emission of Qd is shifted from the emission of Rluc allowing for monitoring of BRET. In the presence of target, the labeled probes bind adjacently in a head-to-head fashion leading to BRET from Rluc to Qd upon addition of a substrate coelenterazine. The sensing system could detect target nucleic acid in buffer as well as in Escherichia coli cellular matrix in 5 min with a detection limit of 0.54 pmol. The ability to detect target nucleic acid rapidly in a cellular matrix with high sensitivity will prove highly beneficial in biomedical and environmental applications.     

A field-deployable method for single and multiplex detection of DNA or RNA from pathogens using Cas12 and Cas13

For some Cas nucleases, trans-cleavage activity triggered by CRISPR/Cas-mediated cis-cleavage upon target nucleic acid recognition has been explored for diagnostic detection. Portable single and multiplex nucleic acid-based detection is needed for crop pathogen management in agriculture. Here, we harnessed and characterized RfxCas13d as an additional CRISPR/Cas nucleic acid detection tool. We systematically characterized AsCas12a, LbCas12a, LwaCas13a, and RfxCas13d combined with isothermal amplification to develop a CRISPR/Cas nucleic acid-based tool for single or multiplex pathogen detection. Our data indicated that sufficient detection sensitivity was achieved with just a few copies of DNA/RNA targets as input. Using this tool, we successfully detected DNA from Fusarium graminearum and Fusarium verticillioides and RNA from rice black-streaked dwarf virus in crude extracts prepared in the field. Our method, from sample preparation to result readout, could be rapidly and easily deployed in the field. This system could be extended to other crop pathogens, including those that currently lack a detection method and have metabolite profiles that make detection challenging. This nucleic acid detection system could also be used for single-nucleotide polymorphism genotyping, transgene detection, and qualitative detection of gene expression in the field.

     

CRISPR-Cas13a系统用于肿瘤诊断与治疗的进展

CRISPR-Cas系统是一种目前已知的基因编辑工具,其中以靶向DNA基因组编辑的CRISPR-Cas9系统的研究较为成熟。相较于靶向DNA的基因组编辑技术CRISPR-Cas9系统,近年来靶向RNA的Ⅵ型-CRISPR家族CRISPR-C2c2/Cas13a系统研究日渐增多。CRISPR-Cas13a系统具有特异性识别并结合单链RNA序列从而非特异性切割RNA的特点,可应用于检测肿瘤外周血游离核酸,对早期肿瘤患者进行筛查。同时,Cas13a在进行体内RNA切割的过程中,不涉及编码基因DNA的改变,可直接对基因转录产物mRNA进行编辑,达到基因修饰的目的,并能够同时靶向多基因转录产物从而调控基因的表达。Cas13a系统可应用于分子诊断及RNA编辑中,该系统在肿瘤的诊断与治疗中也被证实具有广阔的发展前景。基于已有的文献资料,文中综述了靶向RNA的CRISPR-Cas13a技术应用于肿瘤诊断与治疗的研究进展,探讨了CRISPR-Cas13a系统对癌症治疗的新思路及存在的局限,并展望了未来可能的研究方向。     

Enzyme-Free Detection of Mutations in Cancer DNA Using Synthetic Oligonucleotide Probes and Fluorescence Microscopy

Background

Rapid reliable diagnostics of DNA mutations are highly desirable in research and clinical assays. Current development in this field goes simultaneously in two directions: 1) high-throughput methods, and 2) portable assays. Non-enzymatic approaches are attractive for both types of methods since they would allow rapid and relatively inexpensive detection of nucleic acids. Modern fluorescence microscopy is having a huge impact on detection of biomolecules at previously unachievable resolution. However, no straightforward methods to detect DNA in a non-enzymatic way using fluorescence microscopy and nucleic acid analogues have been proposed so far.

Methods and Results

Here we report a novel enzyme-free approach to efficiently detect cancer mutations. This assay includes gene-specific target enrichment followed by annealing to oligonucleotides containing locked nucleic acids (LNAs) and finally, detection by fluorescence microscopy. The LNA containing probes display high binding affinity and specificity to DNA containing mutations, which allows for the detection of mutation abundance with an intercalating EvaGreen dye. We used a second probe, which increases the overall number of base pairs in order to produce a higher fluorescence signal by incorporating more dye molecules. Indeed we show here that using EvaGreen dye and LNA probes, genomic DNA containing BRAF V600E mutation could be detected by fluorescence microscopy at low femtomolar concentrations. Notably, this was at least 1000-fold above the potential detection limit.

Conclusion

Overall, the novel assay we describe could become a new approach to rapid, reliable and enzyme-free diagnostics of cancer or other associated DNA targets. Importantly, stoichiometry of wild type and mutant targets is conserved in our assay, which allows for an accurate estimation of mutant abundance when the detection limit requirement is met. Using fluorescence microscopy, this approach presents the opportunity to detect DNA at single-molecule resolution and directly in the biological sample of choice.     

Operating Cooperatively (OC) Sensor for Highly Specific Recognition of Nucleic Acids

Molecular Beacon (MB) probes have been extensively used for nucleic acid analysis because of their ability to produce fluorescent signal in solution instantly after hybridization. The indirect binding of MB probe to a target analyte offers several advantages, including: improved genotyping accuracy and the possibility to analyse folded nucleic acids. Here we report on a new design for MB-based sensor, called ‘Operating Cooperatively’ (OC), which takes advantage of indirect binding of MB probe to a target analyte. The sensor consists of two unmodified DNA strands, which hybridize to a universal MB probe and a nucleic acid analyte to form a fluorescent complex. OC sensors were designed to analyze two human SNPs and E.coli 16S rRNA. High specificity of the approach was demonstrated by the detection of true analyte in over 100 times excess amount of single base substituted analytes. Taking into account the flexibility in the design and the simplicity in optimization, we conclude that OC sensors may become versatile and efficient tools for instant DNA and RNA analysis in homogeneous solution.     

Real-time monitoring of the strand displacement amplification (SDA) of human cytomegalovirus by a new SDA-piezoelectric DNA sensor system

Nucleic acid amplification has long been used in biosensor technologies, such as DNA sensors, DNA chips and microarrays, due to its advantage of high sensitivity in detecting target DNA. However, dynamic monitoring of nucleic acid amplifications with traditional DNA sensors in real-time is difficult since a constant temperature must be maintained during detection. Thus, the piezoelectric sensor, one type of traditional DNA sensor, is not applicable in real-time monitoring PCR due to the dramatic change in temperature that occurs during reaction. In this study, we introduced strand displacement amplification (SDA), an well-developed nucleic acid amplification technique that can work under conditions of constant temperature, into the development of a novel piezoelectric sensor. Using the new SDA-piezoelectric DNA sensor, we designed a stable system for liquid-phase detection, in which the crystal oscillator plate was fixed by an easily adjustable screw-threaded clamping mechanism and successfully applied the new sensor system to real-time SDA monitoring of human cytomegalovirus (HCMV). This new technique overcomes the shortcomings of traditional DNA sensors in real-time monitoring of nucleic acid amplification. The technique has proved to be a markedly simplified procedure with a number of advantages, such as higher sensitivity, better time efficiency, and the ability of dynamic real-time detection.     

Use of signal-mediated amplification of RNA technology (SMART) to detect marine cyanophage DNA

Here, we describe the application of an isothermal nucleic acid amplification assay, signal-mediated amplification of RNA technology (SMART), to detect DNA extracted from marine cyanophages known to infect unicellular cyanobacteria from the genus Synechococcus. The SMART assay is based on the target-dependent production of multiple copies of an RNA signal, which is measured by an enzyme-linked oligosorbent assay. SMART was able to detect both synthetic oligonucleotide targets and genomic cyanophage DNA using probes designed against the portal vertex gene (g20). Specific signals were obtained for each cyanophage strain (S-PM2 and S-BnMI). Nonspecific genomic DNA did not produce false signals or inhibit the detection of a specific target. In addition, we found that extensive purification of target DNA may not be required since signals were obtained from crude cyanophage lysates. This is the first report of the SMART assay being used to discriminate between two similar target sequences.     

Fluorescent aptasensors based on conformational adaptability of abasic site-containing aptamers in combination with abasic site-binding ligands

Aptamers are nucleic acids that can selectively bind to a variety of targets. Aptamers usually undergo conformational transitions from a flexible or disordered structure into a rigid or ordered structure upon target-binding. This study describes a detection method for l-argininamide (l-Arm) and adenosine based on the conformational adaptability of nucleic acid aptamers. An abasic site (AP site) was formed in the stem and close to the target-binding site of a stem-loop aptamer as an anchoring pocket for a fluorescent ligand. 3,5-Diamino-6-chloro-2-pyrazine carbonitrile (DCPC), which can bind to AP site-containing DNA duplexes by pseudo-base pairing, was utilized as a signaling reporter for the target-binding. The binding of a target to an aptamer induces the tight pairing of bases flanking the AP site, so that DCPC can effectively bind to the stem. The binding of DCPC is accompanied by a significant enhancement of its fluorescence. This new sensing method without an antisense DNA strand was demonstrated by using l-Arm and its aptamer as a model. It was confirmed that the method can sensitively detect l-Arm with a detection limit of 2.1 μM. The proposed method was also applied to adenosine detection, where the reported sequence of an adenosine aptamer was slightly modified. The method based on an AP site-containing aptamer and an AP site-binding ligand was applicable to detection of a target in horse serum.     

Light-up probes: thiazole orange-conjugated peptide nucleic acid for detection of target nucleic acid in homogeneous solution

We have constructed light-up probes for nucleic acid detection. The light-up probe is a peptide nucleic acid (PNA) oligonucleotide to which the asymmetric cyanine dye thiazole orange (TO) is tethered. It combines the excellent hybridization properties of PNA and the large fluorescence enhancement of TO upon binding to DNA. When the PNA hybridizes to target DNA, the dye binds and becomes fluorescent. Free probes have low fluorescence, which may increase almost 50-fold upon hybridization to complementary nucleic acid. This makes the light-up probes particularly suitable for homogeneous hybridization assays, where separation of the bound and free probe is not necessary. We find that the fluorescence enhancement upon hybridization varies among different probes, which is mainly due to variations in free probe fluorescence. For eight probes studied the fluorescence quantum yield at 25 degrees C in the unbound state ranged from 0.0015 to 0.08 and seemed to depend mainly on the PNA sequence. The binding of the light-up probes to target DNA is highly sequence specific and a single mismatch in a 10-mer target sequence was readily identified.     

Synthesis of alanyl nucleobase amino acids and their incorporation into proteins

Proteins which bind to nucleic acids and regulate their structure and functions are numerous and exceptionally important. Such proteins employ a variety of strategies for recognition of the relevant structural elements in their nucleic acid substrates, some of which have been shown to involve rather subtle interactions which might have been difficult to design from first principles. In the present study, we have explored the preparation of proteins containing unnatural amino acids having nucleobase side chains. In principle, the introduction of multiple nucleobase amino acids into the nucleic acid binding domain of a protein should enable these modified proteins to interact with their nucleic acid substrates using Watson-Crick and other base pairing interactions. We describe the synthesis of five alanyl nucleobase amino acids protected in a fashion which enabled their attachment to a suppressor tRNA, and their incorporation into each of two proteins with acceptable efficiencies. The nucleobases studied included cytosine, uracil, thymine, adenine and guanine, i.e. the major nucleobase constituents of DNA and RNA. Dihydrofolate reductase was chosen as one model protein to enable direct comparison of the facility of incorporation of the nucleobase amino acids with numerous other unnatural amino acids studied previously. The Klenow fragment of DNA polymerase I was chosen as a representative DNA binding protein whose mode of action has been studied in detail.     

ChipCheckII - predicting binding curves for multiple analyte strands on small DNA microarrays

Incomplete binding, saturation, and cross-hybridization between partially complementary strands complicate the parallel detection of nucleic acids via DNA microarrays. Treating the competing equilibria governing binding to microarrays requires computational tools. We have developed the web-based program ChipCheckII that calculates total hybridization matrices for target strands interacting with probes on small DNA microarrays. The program can be used to compute the extent of cross-hybridization and other phenomena affecting fidelity of detection based on sequences, quantities of strands, and hybridization conditions as inputs. Enthalpy and entropy of duplex formation are generated locally with UNAfold, including those for complexes that are partially matched. Simulated binding versus temperature curves for portions of a commercial genome chip demonstrate the extent to which cross-hybridization can complicate DNA detection. ChipCheckII is expected to aid nucleic acid chemists in developing high fidelity DNA microarrays.     

Homogeneous detection of unamplified genomic DNA sequences based on colorimetric scatter of gold nanoparticle probes

Nucleic acid diagnostics is dominated by fluorescence-based assays that use complex and expensive enzyme-based target or signal-amplification procedures. Many clinical diagnostic applications will require simpler, inexpensive assays that can be done in a screening mode. We have developed a 'spot-and-read' colorimetric detection method for identifying nucleic acid sequences based on the distance-dependent optical properties of gold nanoparticles. In this assay, nucleic acid targets are recognized by DNA-modified gold probes, which undergo a color change that is visually detectable when the solutions are spotted onto an illuminated glass waveguide. This scatter-based method enables detection of zeptomole quantities of nucleic acid targets without target or signal amplification when coupled to an improved hybridization method that facilitates probe-target binding in a homogeneous format. In comparison to a previously reported absorbance-based method, this method increases detection sensitivity by over four orders of magnitude. We have applied this method to the rapid detection of mecA in methicillin-resistant Staphylococcus aureus genomic DNA samples.     

ChipcheckII—Predicting Binding Curves for Multiple Analyte Strands on Small DNA Microarrays

Incomplete binding, saturation, and cross-hybridization between partially complementary strands complicate the parallel detection of nucleic acids via DNA microarrays. Treating the competing equilibria governing binding to microarrays requires computational tools. We have developed the web-based program ChipCheckII that calculates total hybridization matrices for target strands interacting with probes on small DNA microarrays. The program can be used to compute the extent of cross-hybridization and other phenomena affecting fidelity of detection based on sequences, quantities of strands, and hybridization conditions as inputs. Enthalpy and entropy of duplex formation are generated locally with UNAfold, including those for complexes that are partially matched. Simulated binding versus temperature curves for portions of a commercial genome chip demonstrate the extent to which cross-hybridization can complicate DNA detection. ChipCheckII is expected to aid nucleic acid chemists in developing high fidelity DNA microarrays.     

Detection of Bacillus anthracis from spores and cells by loop-mediated isothermal amplification without sample preparation

Loop-mediated isothermal amplification (LAMP) is a technique capable of rapidly amplifying specific nucleic acid sequences without specialized thermal cycling equipment. In addition, several detection methods that include dye fluorescence, gel electrophoresis, turbidity and colorimetric change, can be used to measure or otherwise detect target amplification. To date, publications have described the requirement for some form of sample nucleic acid extraction (boiling, lysis, DNA purification, etc.) prior to initiating a LAMP reaction. We demonstrate here, the first LAMP positive results obtained from vegetative cells and spores of Bacillus anthracis without nucleic acid extraction. Our data show that the simple addition of cells or spores to the reaction mixture, followed by heating at 63°C is all that is required to reproducibly amplify and detect target plasmid and chromosomal DNA via colorimetric change. The use of three primer sets targeting both plasmids and the chromosome of B. anthracis allows for the rapid discrimination of non-pathogenic bacteria from pathogenic bacteria within 30 min of sampling. Our results indicate that direct testing of B. anthracis spores and cells via LAMP assay will greatly simplify and shorten the detection process by eliminating nucleic acid purification. These results may allow more rapid detection of DNA from pathogenic organisms present in field and environmental samples.