Insight to the residue in P2 position prevents the peptide inhibitor from being hydrolyzed by serine proteases

ABSTRACT

Peptidic inhibitors of proteases are attracting increasing interest not only as drug candidates but also for studying the function and regulation mechanisms of these enzymes. Previously, we screened out a cyclic peptide inhibitor of human uPA and found that Ala substitution of P2 residue turns upain-1 to a substrate. To further investigate the effect of P2 residue on the peptide behavior transformation, we constructed upain-1-W3F, which has Phe replacement in the P2 position. We determined K_D and K_i of upain-1-W3F and found that upain-1-W3F might still exist as an inhibitor. Furthermore, the high-resolution crystal structure of upain-1-W3F·uPA reveals that upain-1-W3F indeed stays as an intact inhibitor bind to uPA. We thus propose that the P2 residue plays a nonnegligible role in the conversion of upain-1 to a substrate. These results also proposed a strategy to optimize the pharmacological properties of peptide-based drug candidates by hydrophobicity and steric hindrance.

Abbreviations : uPA: urokinase-type plasminogen activator; SPD: serine protease domain; S1 pocket: specific substrate-binding pocket     

Structural basis of specificity of a peptidyl urokinase inhibitor, upain-1

Urokinase-type plasminogen activator (uPA) plays a crucial role in the regulation of plasminogen activation, tumor cell adhesion and migration. The inhibition of uPA activity is a promising mechanism for anti-cancer therapy. A cyclic peptidyl inhibitor, upain-1, CSWRGLENHRMC, was identified recently as a competitive and highly specific uPA inhibitor. We determined the crystal structure of uPA in complex with upain-1 at 2.15 A. The structure reveals that the cyclic peptide adopts a rigid conformation stabilized by a disulfide bond (residues 1-12) and three tight beta turns (residues 3-6, 6-9, 9-12). The Glu7 residue of upain-1 forms hydrogen bonds with the main chain nitrogen atoms of residues 4, 5, and 6 of upain-1, and is also critical for maintaining the active conformation of upain-1. The Arg4 of upain-1 is inserted into the uPA's specific S1 pocket. The Ser2 residue of upain-1 locates close to the S1beta pocket of uPA. The Gly5 and Glu7 residues of upain-1 occupy the S2 pocket and the oxyanion hole of uPA, respectively. Furthermore, the Asn8 residue of upain-1 binds to the 37- and 60-loops of uPA and renders the specificity of upain-1 for uPA. Based on this structure, a new pharmacophore for the design of highly specific uPA inhibitors was proposed.     

Cleavage of peptidic inhibitors by target protease is caused by peptide conformational transition

Some peptide sequences can behave as either substrates or inhibitors of serine proteases. Working with a cyclic peptidic inhibitor of the serine protease urokinase-type plasminogen activator (uPA), we have now demonstrated a new mechanism for an inhibitor-to-substrate switch. The peptide, CSWRGLENHAAC (upain-2), is a competitive inhibitor of human uPA, but is also slowly converted to a substrate in which the bond between Arg⁴ and Gly⁵ (the P1-P1′ bond) is cleaved. Substituting the P2 residue Trp³ to an Ala or substituting the P1 Arg⁴ residue with 4-guanidino-phenylalanine strongly increased the substrate cleavage rate. We studied the structural basis for the inhibitor-to-substrate switch by determining the crystal structures of the various peptide variants in complex with the catalytic domain of uPA. While the slowly cleaved peptides bound clearly in inhibitory mode, with the oxyanion hole blocked by the side chain of the P3′ residue Glu⁷, peptides behaving essentially as substrates with a much accelerated rate of cleavage was observed to be bound to the enzyme in substrate mode. Our analysis reveals that the inhibitor-to-substrate switch was associated with a 7?Å translocation of the P2 residue, and we conclude that the inhibitor-to-substrate switch of upain-2 is a result of a major conformational change in the enzyme-bound state of the peptide. This conclusion is in contrast to findings with so-called standard mechanism inhibitors in which the inhibitor-to-substrate switch is linked to minor conformational changes in the backbone of the inhibitory peptide stretch.     

Insights into the serine protease mechanism based on structural observations of the conversion of a peptidyl serine protease inhibitor to a substrate

BackgroundSerine proteases are one of the most studied group of enzymes. Despite the extensive mechanistic studies, some crucial details remain controversial, for example, how the cleaved product is released in the catalysis reaction. A cyclic peptidyl inhibitor (CSWRGLENHRMC, upain-1) of a serine protease, urokinase-type plasminogen activator (uPA), was found to become a slow substrate and cleaved slowly upon the replacement of single residue (W3A).MethodsBy taking advantage of the unique property of this peptide, we report the high-resolution structures of uPA in complex with upain-1-W3A peptide at four different pH values by X-ray crystallography.ResultsIn the structures obtained at low pH (pH 4.6 and 5.5), the cyclic peptide upain-1-W3A was found to be intact and remained in the active site of uPA. At 7.4, the scissile bond of the peptide was found cleaved, showing that the peptide became a uPA substrate. At pH 9.0, the C-terminal part of the substrate was no longer visible, and only the P1 residue occupying the S1 pocket was identified.ConclusionsThe analysis of these structures provides explanations why the upain-1-W3A is a slow substrate. In addition, we clearly identified the cleaved fragments of the peptide at both sides of the scissile bond in the active site of the enzyme, showing a slow release of the cleaved peptide.General significanceThis work indicates that the quick release of the cleaved P′ fragment after the first step of hydrolysis may not always be needed for the second hydrolysis.     

Crystals of urokinase type plasminogen activator complexes reveal the binding mode of peptidomimetic inhibitors

Urokinase type plasminogen activator (uPA), a trypsin-like serine proteinase, plays an important role in normal tissue re-modelling, cell adhesion, and cell motility. In addition, studies utilizing normal animals and potent, selective uPA inhibitors or genetically modified mice that lack functional uPA genes have demonstrated that uPA can significantly enhance tumor initiation, growth, progression and metastasis, strongly suggesting that this enzyme may be a promising anti-cancer target. We have investigated the structure-activity relationship (SAR) of peptidomimetic inhibitors of uPA and solved high resolution X-ray structures of key, lead small molecule inhibitors (e.g. phenethylsulfonamidino(P4)-D-seryl(P3)-L-alanyl(P2)-L-argininal(P1) and derivatives thereof) in complex with the uPA proteinase domain. These potent inhibitors are highly selective for uPA. The non-natural D-seryl residue present at the P3 position in these inhibitors contributes substantially to both potency and selectivity because, due to its D-configuration, its side-chain binds in the S4 pocket to interact with the uPA unique residues Leu97b and His99. Additional potency and selectivity can be achieved by optimizing the inhibitor P4 residue to bind a pocket, known as S1sub or S1beta, that is adjacent to the primary specificity pocket of uPA.     

Saturation mutagenesis of the plasminogen activator inhibitor-1 reactive center.

Plasminogen activator inhibitor-1 (PAI-1) is a specific inhibitor of the serine proteases tissue-type plasminogen activator (tPA) and urokinase-type plasminogen activator (uPA). To systematically investigate the roles of the reactive center P1 and P1' residues in PAI-1 function, saturation mutagenesis was utilized to construct a library of PAI-1 variants. Examination of 177 unique recombinant proteins indicated that a basic residue was required at P1 for significant inhibitory activity toward uPA, whereas all substitutions except proline were tolerated at P1'. P1Lys variants exhibited lower inhibition rate constants and greater sensitivity to P1' substitutions than P1Arg variants. Alterations at either P1 or P1' generally had a larger effect on the inhibition of tPA. A number of variants that were relatively specific for either uPA or tPA were identified. P1Lys-P1'Ala reacted 40-fold more rapidly with uPA than tPA, whereas P1Lys-P1'Trp showed a 6.5-fold preference for tPA. P1-P1' variants containing additional mutations near the reactive center demonstrated only minor changes in activity, suggesting that specific amino acids in this region do not contribute significantly to PAI-1 function. These findings have important implications for the role of reactive center residues in determining serine protease inhibitor (serpin) function and target specificity.     

A serpin-induced extensive proteolytic susceptibility of urokinase-type plasminogen activator implicates distortion of the proteinase substrate-binding pocket and oxyanion hole in the serpin inhibitory mechanism.

The formation of stable complexes between serpins and their target serine proteinases indicates formation of an ester bond between the proteinase active-site serine and the serpin P1 residue [Egelund, R., Rodenburg, K.W., Andreasen, P.A., Rasmussen, M.S., Guldberg, R.E. & Petersen, T.E. (1998) Biochemistry 37, 6375-6379]. An important question concerning serpin inhibition is the contrast between the stability of the ester bond in the complex and the rapid hydrolysis of the acyl-enzyme intermediate in general serine proteinase-catalysed peptide bond hydrolysis. To answer this question, we used limited proteolysis to detect conformational differences between free urokinase-type plasminogen activator (uPA) and uPA in complex with plasminogen activator inhibitor-1 (PAI-1). Whereas the catalytic domain of free uPA, pro-uPA, uPA in complex with non-serpin inhibitors and anhydro-uPA in a non-covalent complex with PAI-1 was resistant to proteolysis, the catalytic domain of PAI-1-complexed uPA was susceptible to proteolysis. The cleavage sites for four different proteinases were localized in specific areas of the C-terminal beta-barrel of the catalytic domain of uPA, providing evidence that the serpin inhibitory mechanism involves a serpin-induced massive rearrangement of the proteinase active site, including the specificity pocket, the oxyanion hole, and main-chain binding area, rendering the proteinase unable to complete the normal hydrolysis of the acyl-enzyme intermediate. The distorted region includes the so-called activation domain, also known to change conformation on zymogen activation.     

Structure-based design, synthesis and SAR of a novel series of thiopheneamidine urokinase plasminogen activator inhibitors

The serine protease urokinase plasminogen activator (uPA) is thought to play a central role in tumor metastasis and angiogenesis. Molecular modeling studies suggest that 5-thiomethylthiopheneamidine inhibits uPA by binding at the S1 pocket of the active site. Further structure based elaboration of this residue resulted in a novel class of potent and selective inhibitors of uPA.     

Structure-function relationship of serine protease-protein inhibitor interaction.

We report our progress in understanding the structure-function relationship of the interaction between protein inhibitors and several serine proteases. Recently, we have determined high resolution solution structures of two inhibitors Apis mellifera chymotrypsin inhibitor-1 (AMCI-I) and Linum usitatissimum trypsin inhibitor (LUTI) in the free state and an ultra high resolution X-ray structure of BPTI. All three inhibitors, despite totally different scaffolds, contain a solvent exposed loop of similar conformation which is highly complementary to the enzyme active site. Isothermal calo- rimetry data show that the interaction between wild type BPTI and chymotrypsin is entropy driven and that the enthalpy component opposes complex formation. Our research is focused on extensive mutagenesis of the four positions from the protease binding loop of BPTI: P1, P1', P3, and P4. We mutated these residues to different amino acids and the variants were characterized by determination of the association constants, stability parameters and crystal structures of protease-inhibitor complexes. Accommodation of the P1 residue in the S1 pocket of four proteases: chymotrypsin, trypsin, neutrophil elastase and cathepsin G was probed with 18 P1 variants. High resolution X-ray structures of ten complexes between bovine trypsin and P1 variants of BPTI have been determined and compared with the cognate P1 Lys side chain. Mutations of the wild type Ala16 (P1') to larger side chains always caused a drop of the association constant. According to the crystal structure of the Leu16 BPTI-trypsin complex, introduction of the larger residue at the P1' position leads to steric conflicts in the vicinity of the mutation. Finally, mutations at the P4 site allowed an improvement of the association with several serine proteases involved in blood clotting. Conversely, introduction of Ser, Val, and Phe in place of Gly12 (P4) had invariably a destabilizing effect on the complex with these proteases.     

Mechanism of inhibition of the retroviral protease by a Rous sarcoma virus peptide substrate representing the cleavage site between the gag p2 and p10 proteins.

The activity of the avian myeloblastosis virus (AMV) or the human immunodeficiency virus type 1 (HIV-1) protease on peptide substrates which represent cleavage sites found in the gag and gag-pol polyproteins of Rous sarcoma virus (RSV) and HIV-1 has been analyzed. Each protease efficiently processed cleavage site substrates found in their cognate polyprotein precursors. Additionally, in some instances heterologous activity was detected. The catalytic efficiency of the RSV protease on cognate substrates varied by as much as 30-fold. The least efficiently processed substrate, p2-p10, represents the cleavage site between the RSV p2 and p10 proteins. This peptide was inhibitory to the AMV as well as the HIV-1 and HIV-2 protease cleavage of other substrate peptides with Ki values in the 5-20 microM range. Molecular modeling of the RSV protease with the p2-p10 peptide docked in the substrate binding pocket and analysis of a series of single-amino acid-substituted p2-p10 peptide analogues suggested that this peptide is inhibitory because of the potential of a serine residue in the P1' position to interact with one of the catalytic aspartic acid residues. To open the binding pocket and allow rotational freedom for the serine in P1', there is a further requirement for either a glycine or a polar residue in P2' and/or a large amino acid residue in P3'. The amino acid residues in P1-P4 provide interactions for tight binding of the peptide in the substrate binding pocket.     

Structural study of the uPA-nafamostat complex reveals a covalent inhibitory mechanism of nafamostat

Nafamostat mesylate (NM) is a synthetic compound that inhibits various serine proteases produced during the coagulation cascade and inflammation. Previous studies showed that NM was a highly safe drug for the treatment of different cancers, but the precise functions and mechanisms of NM are not clear. In this study, we determined a series of crystal structures of NM and its hydrolysates in complex with a serine protease (urokinase-type plasminogen activator [uPA]). These structures reveal that NM was cleaved by uPA and that a hydrolyzed product (4-guanidinobenzoic acid [GBA]) remained covalently linked to Ser195 of uPA, and the other hydrolyzed product (6-amidino-2-naphthol [6A2N]) released from uPA. Strikingly, in the inactive uPA (uPA-S195A):NM structure, the 6A2N side of intact NM binds to the specific pocket of uPA. Molecular dynamics simulations and end-point binding free-energy calculations show that the conf1 of NM (6A2N as P1 group) in the uPA-S195A:NM complex may be more stable than conf2 of NM (GBA as P1 group). Moreover, in the structure of uPA:NM complex, the imidazole group of His57 flips further away from Ser195 and disrupts the stable canonical catalytic triad conformation. These results not only reveal the inhibitory mechanism of NM as an efficient serine protease inhibitor but also might provide the structural basis for the further development of serine protease inhibitors.     

Dissecting and designing inhibitor selectivity determinants at the S1 site using an artificial Ala190 protease (Ala190 uPA)

A site-directed mutant of the serine protease urokinase-type plasminogen activator (uPA), was produced to assess the contribution of the Ser190 side-chain to the affinity and selectivity of lead uPA inhibitors in the absence of other differences present in comparisons of natural proteases. Crystallography and enzymology involving WT and Ala190 uPA were used to calculate free energy binding contributions of hydrogen bonds involving the Ser190 hydroxyl group (O(gamma)(Ser190)) responsible for the remarkable selectivity of 6-halo-5-amidinoindole and 6-halo-5-amidinobenzimidazole inhibitors toward uPA and against natural Ala190 protease anti-targets. Crystal structures of uPA complexes of novel, active site-directed arylguanidine and 2-aminobenzimidazole inhibitors of WT uPA, together with associated K(i) values for WT and Ala190 uPA, also indicate a significant role of Ser190 in the binding of these classes of uPA inhibitors. Structures and associated K(i) values for a lead inhibitor (CA-11) bound to uPA and to five other proteases, as well as for other leads bound to multiple proteases, help reveal the features responsible for the potency (K(i)=11nM) and selectivity of the remarkably small inhibitor, CA-11. The 6-fluoro-5-amidinobenzimidzole, CA-11, is more than 1000-fold selective against natural Ala190 protease anti-targets, and more than 100-fold selective against other Ser190 anti-targets.     

Inhibitory specificity and potency of proSAAS-derived peptides toward proprotein convertase 1.

Prohormone convertase 1 (PC1), mediating the proteolytic processing of neural and endocrine precursors, is thought to be regulated by the neuroendocrine protein proSAAS. The PC1 inhibitory sequence is mostly confined within a 10-12-amino acid segment near the C terminus of the conserved human proSAAS and contains the critical KR(244) dibasic motif. Our results show that the decapeptide proSAAS-(235-244)( 235)VLGALLRVKR(244) is the most potent reversible competitive PC1-inhibitor (K(i) approximately 9 nm). The C-terminally extended proSAAS-(235-246) exhibits a 5-6-fold higher K(i) ( approximately 51 nm). The additional LE sequence at P1'-P2', resulted in a competitive substrate cleaved by PC1 at KR(244) downward arrowLE(246). Systematic alanine scanning and in some cases lysine scanning tested the contribution of each residue within proSAAS-(235-246) toward the PC1-inhibition's specificity and potency. The amino acids P1 Arg, P2 Lys, and P4 Arg are all critical for inhibition. Moreover, the aliphatic P3 Val and P5, P6, and P1' Leu significantly affect the degree of enzyme inactivation and PC1 specificity. Interestingly, a much longer N- and C-terminally extended endogenous rat proSAAS-(221-254) called little PenLen, was found to be a 3-fold less potent PC1 inhibitor with reduced selectivity but a much better substrate than proSAAS-(235-246). Molecular modeling studies and circular dichroism analysis indicate an extended and poly-l-proline II type structural conformation for proSAAS-(235-244), the most potent PC1 inhibitor, a feature not present in poor PC1 inhibitors.     

The contribution of the exosite residues of plasminogen activator inhibitor-1 to proteinase inhibition

The binding of plasminogen activator inhibitor-1 (PAI-1) to serine proteinases, such as tissue-type plasminogen activator (tPA) and urokinase-type plasminogen activator (uPA), is mediated by the exosite interactions between the surface-exposed variable region-1, or 37-loop, of the proteinase and the distal reactive center loop (RCL) of PAI-1. Although the contribution of such interactions to the inhibitory activity of PAI-1 has been established, the specific mechanistic steps affected by interactions at the distal RCL remain unknown. We have used protein engineering, stopped-flow fluorimetry, and rapid acid quenching techniques to elucidate the role of exosite interactions in the neutralization of tPA, uPA, and beta-trypsin by PAI-1. Alanine substitutions at the distal P4' (Glu-350) and P5' (Glu-351) residues of PAI-1 reduced the rates of Michaelis complex formation (k(a)) and overall inhibition (k(app)) with tPA by 13.4- and 4.7-fold, respectively, whereas the rate of loop insertion or final acyl-enzyme formation (k(lim)) increased by 3.3-fold. The effects of double mutations on k(a), k(lim), and k(app) were small with uPA and nonexistent with beta-trypsin. We provide the first kinetic evidence that the removal of exosite interactions significantly alters the formation of the noncovalent Michaelis complex, facilitating the release of the primed side of the distal loop from the active-site pocket of tPA and the subsequent insertion of the cleaved reactive center loop into beta-sheet A. Moreover, mutational analysis indicates that the P5' residue contributes more to the mechanism of tPA inhibition, notably by promoting the formation of a final Michaelis complex.     

A novel type of bifunctional inhibitor directed against proteolytic activity and receptor/ligand interaction. Cystatin with a urokinase receptor binding site

Cancer invasion and metastasis is a process requiring a coordinated series of (anti-)adhesive, migratory, and pericellular proteolytic events involving various proteases such as urokinase-type plasminogen activator (uPA)/plasmin, cathepsins B and L, and matrix metalloproteases. Novel types of double-headed inhibitors directed to different tumor-associated proteolytic systems were generated by substitution of a loop in chicken cystatin, which is nonessential for cysteine protease inhibition, with uPA-derived peptides covering the human uPA receptor binding sequence uPA-(19-31). The inhibition constants of these hybrids toward cysteine proteases are similar to those of wild-type cystatin (K(i), papain (pm), 1.9-2.4; K(i), cathepsin B (nm), 1.0-1.7; K(i), cathepsin L (pm), 0.12-0.61). FACS analyses revealed that the hybrids compete for binding of uPA to the cell surface-associated uPA receptor (uPAR) expressed on human U937 cells. The simultaneous interaction of the hybrid molecules with papain and uPAR was analyzed by surface plasmon resonance. The measured K(D) value of a papain-bound cystatin variant harboring the uPAR binding sequence of uPA (chCys-uPA-(19-31)) and soluble uPAR was 17 nm (K(D) value for uPA/uPAR interaction, 5 nm). These results indicate that cystatins with a uPAR binding site are efficient inhibitors of cysteine proteases and uPA/uPAR interaction at the same time. Therefore, these compact and small bifunctional inhibitors may represent promising agents for the therapy of solid tumors.     

Crystal structure of a prostate kallikrein isolated from stallion seminal plasma: a homologue of human PSA

Prostate-specific kallikrein, a member of the gene family of serine proteases, was initially discovered in semen and is the most useful serum marker for prostate cancer diagnosis and prognosis. We report the crystal structure at 1.42A resolution of horse prostate kallikrein (HPK). This is the first structure of a serine protease purified from seminal plasma. HPK shares extensive sequence homology with human prostate-specific antigen (PSA), including a predicted chymotrypsin-like specificity, as suggested by the presence of a serine residue at position S1 of the specificity pocket. In contrast to other kallikreins, HPK shows a structurally distinct specificity pocket. Its entrance is blocked by the kallikrein loop, suggesting a possible protective or substrate-selective role for this loop. The HPK structure seems to be in an inactivated state and further processing might be required to allow the binding of substrate molecules. Crystal soaking experiments revealed a binding site for Zn(2+) and Hg(2+), two known PSA inhibitors.     

Irreversible inhibition of serine proteases by peptidyl derivatives of alpha-aminoalkylphosphonate diphenyl esters

Peptidyl alpha-aminoalkylphosphonate diphenyl esters have been synthesized and shown to be effective inhibitors of serine proteases. Extending the peptide chain from a single alpha-aminoalkylphosphonate residue (kobs/[I] = 2.5-260 M-1 s-1) to a tripeptide or tetrapeptide derivative (kobs/[I] = 7,000-17,000 M-1 s-1) resulted in 65-2800 improvement in inhibitory potency and increased specificity. The rate of inactivation of chymotrypsin by MeO-Suc-Ala-Ala-Pro-HNCH(CH2Ph)P(O)(OPh)2 was decreased 5 fold in the presence of the substrate Suc-Val-Pro-Phe-NA (0.119 mM). Phosphonylated serine proteases are extremely stable since the half-life for reactivation was greater than 48 hrs for the inhibited elastases and at least 10 hrs for chymotrypsin.     

Design and synthesis of highly constrained factor Xa inhibitors: amidine-substituted bis(benzoyl)--diazepan-2-ones and bis(benzylidene)-bis(gem-dimethyl)cycloketones

Two conformationally constrained templates have been designed to provide selective inhibitors of the coagulation cascade serine protease, Factor Xa (FXa). The most active inhibitor, 2,7-bis[(Z)-p-amidinobenzylidene)]-3,3,6,6-tetramethylcycloheptanone, exhibits a K(i) of 42 nM against FXa, with strong selectivity against thrombin (1000-fold), trypsin (300-fold) and plasmin (900-fold). With only two freely rotatable bonds, molecular modeling suggests that one amidine group is positioned into the S1 pocket, forming hydrogen bonds with the side chain of Asp189, similar to other amidine-based inhibitors, with the second benzamidine positioned into the S4 pocket in a position to form strong cation-pi bonding with the S4 aryl cage. We suggest that this interaction plays an important role in the specificity of these inhibitors against other serine proteases.     

Multiple pocket recognition of SNAP25 by botulinum neurotoxin serotype E

Botulinum neurotoxins (BoNTs) are zinc proteases that cleave SNARE proteins to elicit flaccid paralysis by inhibiting the fusion of neurotransmitter-carrying vesicles to the plasma membrane of peripheral neurons. There are seven serotypes of BoNT, termed A-G. The molecular basis for SNAP25 recognition and cleavage by BoNT serotype E is currently unclear. Here we define the multiple pocket recognition of SNAP25 by LC/E. The initial recognition of SNAP25 is mediated by the binding of the B region of SNAP25 to the substrate-binding (B) region of LC/E comprising Leu166, Arg167, Asp127, Ala128, Ser129, and Ala130. The mutations at these residues affected substrate binding and catalysis. Three additional residues participate in scissile bond cleavage of SNAP25 by LC/E. The P3 site residues, Ile178, of SNAP25 interacted with the S3 pocket in LC/E through hydrophobic interactions. The S3 pocket included Ile47, Ile164, and Ile182 and appeared to align the P1' and P2 residues of SNAP25 with the S1' and S2 pockets of LC/E. The S1' pocket of LC/E included three residues, Phe191, Thr159, and Thr208, which contribute hydrophobic and steric interactions with the SNAP25 P1' residue Ile181. The S2 pocket residue of LC/E, Lys224, binds the P2 residue of SNAP25, Asp179, through ionic interactions. Deletion mapping indicates that main chain interaction(s) of residues 182-186 of SNAP25 contribute to substrate recognition by LC/E. Understanding the mechanism for substrate specificity provides insight for the development of inhibitors against the botulinum neurotoxins.