Prepro-alpha-factor has a cleavable signal sequence

MAT alpha Saccharomyces cerevisiae secrete a small peptide mating pheromone termed alpha-factor. Its precursor, prepro-alpha-factor, is translocated into the endoplasmic reticulum and glycosylated at three sites. The glycosylated form is the major product in a yeast in vitro translation/translocation system. However, there is another translocated, nonglycosylated product that contains a previously unidentified modification. Contrary to previous results suggesting that the signal sequence of prepro-alpha-factor is not cleaved, amino-terminal radiosequencing has identified this product as prepro-alpha-factor without its signal sequence, that is, pro-alpha-factor. The translocated, glycosylated proteins are also processed by signal peptidase. Moreover, we have found that both purified eukaryotic and prokaryotic signal peptidase can process prepro-alpha-factor. Experiments using a yeast secretory mutant (sec 18) blocked in transport from the endoplasmic reticulum to the Golgi indicate that the protein is also cleaved in vivo. Finally, characterization of the Asn-linked oligosaccharide present on pro-alpha-factor in the yeast in vitro system by use of specific glucosidase and mannosidase inhibitors indicates that they have had the three terminal glucoses and probably one mannose removed. Therefore they most likely consist of Man8GlcNAc2 structures, identical to those found in the endoplasmic reticulum in vivo.     

Ligand crowding at a nascent signal sequence

We have systematically analyzed the molecular environment of the signal sequence of a growing secretory protein from Escherichia coli using a stage- and site-specific cross-linking approach. Immediately after emerging from the ribosome, the signal sequence of pOmpA is accessible to Ffh, the protein component of the bacterial signal recognition particle, and to SecA, but it remains attached to the surface of the ribosome via protein L23. These contacts are lost upon further growth of the nascent chain, which brings the signal sequence into sole proximity to the chaperone Trigger factor (TF). In its absence, nascent pOmpA shows extended contacts with L23, and even long chains interact in these conditions proficiently with Ffh. Our results suggest that upon emergence from the ribosome, the signal sequence of an E. coli secretory protein gradually becomes sequestered by TF. Although TF thereby might control the accessibility of pOmpA's signal sequence to Ffh and SecA, it does not influence interaction of pOmpA with SecB.     

Structural studies on a twin-arginine signal sequence

Translocation of folded proteins across biological membranes can be mediated by the so-called ‘twin-arginine translocation’ (Tat) system. To be translocated, Tat substrates require N-terminal signal sequences which usually contain the eponymous twin-arginine motif. Here we report the first structural analysis of a twin-arginine signal sequence, the signal sequence of the high potential iron-sulfur protein from Allochromatium vinosum. Nuclear magnetic resonance (NMR) analyses of amide proton resonances did not indicate a signal sequence structure. Accordingly, data from H/D exchange matrix-assisted laser desorption/ionization-time of flight (MALDI-TOF) mass spectrometry showed that the amide protons of the signal sequence exchange rapidly, indicating the absence of secondary structure in the signal sequence up to L29. We conclude that the conserved twin-arginine motif does not form a structure by itself or as a result of intramolecular interactions.     

Helix formation in methylated copolymers of lysine and alanine.

Random copolymers of lysine and alanine, 2:1 and 1:1, were trimethylated on the lysine amino groups to quaternary ammonium groups. Methylated and unmethylated polymers were prepared with Cl- or ClO4- as the counterion. CD spectra were measured for increasing concentration of peptide without added salt, and at constant peptide concentration in increasing NaCl or NaClO4. Unmethylated peptides, as the chloride, form alpha-helix more readily than do the methylated peptides. The opposite occurs with ClO4- as counterion. The helix-promoting effect of methylated lysine residues (ClO4- counterion) is diminished by the presence of alanine, as compared with effects when lysine is the only type of residue. The effect of methylation of proteins on helix formation may depend on the types of anionic groups with which the protein may be involved.     

Helix stability and the mechanism of cruciform extrusion in supercoiled DNA molecules

The kinetic properties of cruciform extrusion in supercoiled DNA molecules fall into two main classes. C-type cruciforms extrude in the absence of added salt, at relatively low temperatures, with large activation energies, while S-type cruciforms exhibit no extrusion in the absence of salt, and maximal rates at 50 mM NaCl, with activation energies about one quarter those of the C-type. These diverse properties are believed to reflect two distinct pathways for the extrusion process, and are determined by the nature of the sequences which form the context of the inverted repeat. C-type kinetics are conferred by A + T rich sequences, implying a role of helix stability in the selection. In this study we have shown that: 1. Helix-destabilising solvents (dimethyl formamide and formamide) facilitate extrusion by normally S-type molecules at low temperatures in the absence of salt. 2. C-type extrusion is strongly suppressed by low concentrations (2-4 microM) distamycin, at which concentrations S-type extrusion is enhanced. 3. Some extrusion occurs in a C-type construct in the presence of 50 mM NaCl. This is increased by addition of 3 microM distamycin, under which conditions extrusion becomes effectively S-type. Thus S-type constructs can behave in a quasi-C-type manner in the presence of helix-destabilising solvents, and C-type extrusion is suppressed by binding a compound which stabilises A + T rich regions of DNA. Helix destabilisation leads to C-type behaviour, while helix stabilisation results in S-type properties. These studies demonstrate the influence of contextual helix stability on the selection of kinetic mechanism of cruciform extrusion.     

Complete amino-acid sequence of a functional unit from a molluscan hemocyanin (Helix pomatia)

From the beta c-hemocyanin (beta c-Hc) of the vineyard snail, Helix pomatia, the functional unit d (Mr approximately equal to 50,000-55,000) was isolated by limited proteolysis and gel chromatography. A small quantity of functional unit d was obtained intact, but the major part in the form of two peptides (Mr approximately equal to 43,000 and 10,000, respectively) connected by a disulfide bridge. After reduction and carboxymethylation, these were separated from each other and cleaved by conventional methods. The peptides were isolated by gel chromatography and HPLC, and sequenced manually or automatically. The complete sequence of Helix beta c-Hc d comprises 410 residues plus 3 residues at the N-terminus seemingly resulting from incomplete cleavage. There is apparently only one carbohydrate side-chain. Comparison of this gastropodan hemocyanin sequence to the partial sequence of a cephalopodan Hc C-terminal unit revealed sufficient identities to state that the functional units of molluscan hemocyanins have arisen by a series of gene duplications. On the other hand, there is practically no homology with arthropodan hemocyanins except for one section of 42 residues which is clearly homologous. This section corresponds to the Copper B site of Panulirus interruptus hemocyanin. It is also found in tyrosinases from Neurospora crassa, Streptomyces glaucescens, and mouse. In the N-terminal half of Helix beta c-Hc d there are other sections clearly homologous to the tyrosinases, but overall homology is limited. The second copper-binding site was not identified but must be completely distinct from the Copper A binding site of arthropodan hemocyanins. It is suggested that molluscan and arthropodan hemocyanins have evolved independently from a common ancestral mononuclear copper protein.     

Helix stability confers salt resistance upon helical antimicrobial peptides

Salt sensitivity of antimicrobial peptides poses a major obstacle in their development as novel antibiotics. Here we report the use of helix-capping motifs to confer salt resistance upon helical antimicrobial peptides. The helical content of the template peptide [RLLR](5) was almost completely destroyed at salt concentrations over 200 mm NaCl, leading to a 8-32-fold decrease in antimicrobial activity. However, the introduction of helix-capping motifs at the helix termini resulted in a structurally stable peptide, which retained membrane-permeabilizing and antimicrobial activities upon exposure to salt. Furthermore, the peptide with helix-capping motifs directly inhibited the in vivo growth of Streptococcus pyogenes, which causes localized fasciitis in mice, and prevented the necrosis of the epidermis, dermis, and subcutaneous muscle layers. Results indicate that the adoption of helix-capping motifs into salt-sensitive antimicrobial peptides provides the necessary structural stability for the peptides to permeabilize cell membranes and cause cell death at physiological salt concentrations.     

Dart formation in Helix aspersa (Mollusca,Gastropoda)

Summary Dart formation in Helix aspersa has been investigated by SEM of isolated darts at progressive stages in their development, and by histology of dart sacs at the same times. Dart formation begins at the tip of a tubercle where a small group of epithelial cells secrete an organic material filling a small CaCO₃ cone that is the first mineralized part of the shaft. Subsequent secretory activity by an increasing area of the tubercle epithelium results in an increase in the diameter and anterior lengthening of the shaft. Continued secretion by the tubercle and dart sac epithelium produces the flare and finally the corona. A pattern of deposition is also evident in the fine structure of the mineral. In the shaft and vanes there is an inner layer of spherulitic prismatic structure which is covered by a layer of irregular patches of simple prismatic structure. The outermost layer of the shaft and vanes has a continuous simple prismatic structure. Two layers are present in the flare, an inner granular amorphous layer and an outer spherulitic prismatic layer. The corona consists of a single rarefied prismatic layer. A mechanism of dart formation is suggested that involves two types of organic matrix, calcifying and non-calcifying. Measurements of the calcium content of darts, dart sacs, and collars indicate that the hemolymph is the probable source of calcium for the dart.     

Fluorescence properties and conformational stability of the beta-hemocyanin of Helix pomatia

The beta-hemocyanin (beta-HpH) is one of the three dioxygen-binding proteins found freely dissolved in the hemolymph of the gastropodan mollusc Helix pomatia. The didecameric molecule (molecular mass 9 MDa) is built up of only one type of subunits. The fluorescence properties of the oxygenated and apo-form (copper-deprived) of the didecamer and its subunits were characterized. Upon excitation of the hemocyanins at 295 or 280 nm, tryptophyl residues buried in the hydrophobic interior of the protein determine the fluorescence emission. This is confirmed by quenching experiments with acrylamide, cesium chloride and potassium iodide. The copper-dioxygen system at the binuclear active site quenches the tryptophan emission of the oxy-beta-HpH. The removal of this system increases the fluorescence quantum yield and causes structural rearrangement of the microenvironment of the emitting tryptophyl residues in the apo-form. Time-resolved fluorescence measurements show that the oxygenated and copper-deprived forms of the beta-HpH and its subunits exist in different conformations. The thermal stability of the oxy- and apo-beta-HpH is characterized by a transition temperature (Tm) of 84 degrees C and 63 degrees C, respectively, obtained by differential scanning calorimetry. Increase of the temperature influences the active site at lower temperatures than the environments of tryptophans and tyrosines causing a loss of oxygen bound to the copper atoms. This process is, at least partially, reversible as after cooling of the protein samples, around 60% reinstatement of the copper-peroxide band has been observed. The results confirm the role of the copper-dioxygen complex for the stabilization of the hemocyanin structure in solution. The other important stabilizing factor is oligomerization of the hemocyanin molecule.     

Treating sequence dependence of protein stability in a mean-field model

Several statistical mechanical theories of protein stability have recently been developed, based on mean-field approximations, random energy models, or related assumptions. None of these models treats how protein stability depends on the monomer sequence: they only treat sequences as being random. Here, as a first approximation to sequence effects, we develop theory for how the compact conformations of copolymer chains of two monomer types A and B depend on 4 composition quantities: the numbers of AA, AB, BA, and BB segments. We apply this to improving the “reconfiguration term” of a mean-field treatment of protein stability [K. A. Dill (1985), Biochemistry, Vol. 24, pp. 1501–1509]. Reconfiguration refers to the change of a compact chain from a random conformation to one with an optimal hydrophobic core. By comparison with exhaustive enumeration studies, we find that the theory gives improved estimates for reconfiguration properties in compact copolymers. One interesting result is that for a chain of a given length and hydrophobic (H)/polar (P) composition, some hydrophobic clustering in the sequence (PHHHHP .) is more stabilizing than if hydrophobic and polar residues are perfectly alternating (HPHP .). © 1996 John Wiley & Sons, Inc.     

A putative signal peptidase recognition site and sequence in eukaryotic and prokaryotic signal peptides

Presecretory signal peptides of 39 proteins from diverse prokaryotic and eukaryotic sources have been compared. Although varying in length and amino acid composition, the labile peptides share a hydrophobic core of approximately 12 amino acids. A positively charged residue (Lys or Arg) usually precedes the hydrophobic core. Core termination is defined by the occurrence of a charged residue, a sequence of residues which may induce a beta-turn in a polypeptide, or an interruption in potential alpha-helix or beta-extended strand structure. The hydrophobic cores contain, by weight average, 37% Leu: 15% Ala: 10% Val: 10% Phe: 7% Ile plus 21% other hydrophobic amino acids arranged in a non-random sequence. Following the hydrophobic cores (aligned by their last residue) a highly non-random and localized distribution of Ala is apparent within the initial eight positions following the core: (formula; see text) Coincident with this observation, Ala-X-Ala is the most frequent sequence preceding signal peptidase cleavage. We propose the existence of a signal peptidase recognition sequence A-X-B with the preferred cleavage site located after the sixth amino acid following the core sequence. Twenty-two of the above 27 underlined Ala residues would participate as A or B in peptidase cleavage. Position A includes the larger aliphatic amino acids, Leu, Val and Ile, as well as the residues already found at B (principally Ala, Gly and Ser). Since a preferred cleavage site can be discerned from carboxyl and not amino terminal alignment of the hydrophobic cores it is proposed that the carboxyl ends are oriented inward toward the lumen of the endoplasmic reticulum where cleavage is thought to occur. This orientation coupled with the predicted beta-turn typically found between the core and the cleavage site implies reverse hairpin insertion of the signal sequence. The structural features which we describe should help identify signal peptides and cleavage sites in presumptive amino acid sequences derived from DNA sequences.     

A comparison of signal sequence prediction methods using a test set of signal peptides

We describe the creation of a test set containing secretory and non-secretory proteins. Five existing prediction programs for signal sequences and their cleavage sites are compared on the basis of this test set: SPScan, SigCleave, SignalP V1.1, SignalP V2.0. b2-HMM and SignalP V2.0.b2-NN.     

Dynamics and stability of a three-dimensional model of cell signal transduction

In this paper, we consider a three-dimensional model of cell signal transduction. In this model, the deactivation of signalling proteins occur throughout the cytosol and activation is localized to specific sites in the cell. We use matched asymptotic expansions to construct the dynamic solutions of signalling protein concentrations. The result of the asymptotic analysis is a system of ordinary differential equations. This reduced system is compared to numerical simulations of the full three-dimensional system. As well, we consider the stability of equilibrium solutions. We find that the systems under consideration may undergo sustained oscillations, hysteresis and other complex behaviors. The simulations of the full three-dimensional system agree with simulations of the reduced ordinary differential equations.     

Monte Carlo simulations of voltage-driven translocation of a signal sequence

CD1d-deficient (CD1d-/-) mouse lymphocytes were analyzed to classify the natural killer T (NKT) cells without reactivity to CD1d. The cells bearing a V(alpha)19.1-J(alpha)26 (AV19-AJ33) invariant TCR alpha chain, originally found in the peripheral blood lymphocytes, were demonstrated to be abundant in the NK1.1+ but not NK1.1- T cell population isolated from CD1d-/- mice. Moreover, more than half (11/21) of the hybrid cell lines established from CD1d-/- NKT cells expressed the V(alpha)19.1-J(alpha)26 invariant TCR alpha chain. The expression of the invariant V(alpha)19.1-J(alpha)26 mRNA was absent in beta2-microglobulin-deficient mice. Collectively, the present findings suggest the presence of a second NKT cell repertoire characterized by an invariant TCR alpha chain (V(alpha)19.1-J(alpha)26) that is selected by an MHC class I-like molecule other than CD1d.     

Secondary structure and orientation of a chemically synthesized mitochondrial signal sequence in phospholipid bilayers

A pre-sequence of 25 amino acids is required for import of yeast cytochrome oxidase subunit IV into mitochondria. Structure and orientation of the 25 amino acids synthesized peptide (p25) in a lipid bilayer were investigated by infrared attenuated total reflection spectroscopy. This method allowed to overcome the difficulties related to the optical turbidity due to the light scattering on membrane fragments which prevents the use of circular dichroism. We demonstrate here that incubation of the peptide with DOPC (dioleoylphosphatidylcholine) and DOPC-CL (dioleoylphosphatidylcholine - cardiolipin) liposomes is accompanied by an increase in alpha-helical content as compared to beta structure. Polarisation measurements indicate that the amphipathic helical segment is inserted parallel to the lipid acyl chains in cardiolipin containing liposomes.     

Making waves: pattern formation by a cell-surface-associated signal

Starving Myxococcus xanthus cells organize into two strikingly different spatio-temporal patterns, either rippling or aggregation of cells into fruiting bodies. Formation of both patterns depends on a cell-surface-associated, non-diffusible signal, the C-signal. A key motility parameter modulated by the C-signal during pattern formation is the frequency at which cells reverse their gliding direction, with low and high levels of C-signalling causing an increase and a decrease in the reversal frequency, respectively. Recently, a simple yet elegant mathematical model was proposed to explain the mechanism underlying the non-linear dependence of the reversal frequency on C-signalling levels. The mathematical solution hinges on the introduction of a negative feedback loop into the biochemical circuit that regulates the reversal frequency. This system displays an oscillatory behaviour in which the oscillation frequency depends in a non-monotonic manner on the level of C-signalling. Thus, the biochemical oscillator recapitulates the effect of the C-signal on the reversal frequency. The challenge for biologists now is to test the mathematical model experimentally.