The membrane insertion of helical antimicrobial peptides from the N-terminus of Helicobacter pylori ribosomal protein L1

The interaction of two helical antimicrobial peptides, HPA3 and HPA3P with planar supported lipid membranes was quantitatively analysed using two complementary optical biosensors. The peptides are analogues of Hp(2-20) derived from the N-terminus of Helicobacter pylori ribosomal protein L1 (RpL1). The binding of these two peptide analogues to zwitterionic dimyristoyl-phosphatidylcholine (DMPC) and negatively charged membranes composed of DMPC/dimyristoylphosphatidylglycerol (DMPG) (4:1) was determined using surface plasmon resonance (SPR) and dual polarisation interferometry (DPI). Using SPR analysis, it was shown that the proline substitution in HPA3P resulted in much lower binding for both zwitterionic and anionic membranes than HPA3. Structural changes in the planar DMPC and DMPC/DMPG (4:1) bilayers induced by the binding of both Hp(2-20) analogues were then resolved in real-time with DPI. The overall process of peptide-induced changes in membrane structure was analysed by the real-time changes in bound peptide mass as a function of bilayer birefringence. The insertion of both HPA3 and HPA3P into the supported lipid bilayers resulted in a decrease in birefringence with increasing amounts of bound peptide which reflects a decrease in the order of the bilayer. The binding of HPA3 to each membrane was associated with a higher level of bound peptide and greater membrane lipid disordering and a faster and higher degree of insertion into the membrane than HPA3P. Furthermore, the binding of both HPA3 and HPA3P to negatively charged DMPC/DMPG bilayers also leads to a greater disruption of the lipid ordering. These results demonstrate the geometrical changes in the membrane upon peptide insertion and the extent of membrane structural changes can be obtained quantitatively. Moreover, monitoring the effect of peptides on a structurally characterised bilayer has provided further insight into the role of membrane structure changes in the molecular basis of peptide selectivity and activity and may assist in defining the mode of antimicrobial action.     

Real-time quantitative analysis of lipid disordering by aurein 1.2 during membrane adsorption, destabilisation and lysis

Effective antimicrobial peptides (AMPs) distinguish between the host and microbial cells, show selective antimicrobial activity and exhibit a fast killing mechanism. Although understanding the structure-function characteristics of AMPs is important, the impact of the peptides on the architecture of membranes with different lipid compositions is also critical in understanding the molecular mechanism and specificity of membrane destabilisation. In this study, the destabilisation of supported lipid bilayers (SLBs) by the AMP aurein 1.2 was quantitatively analysed by dual polarisation interferometry. The lipid bilayers were formed on a planar silicon oxynitride chip, and composed of mixed synthetic lipids, or Escherichiacoli lipid extract. The molecular events leading sequentially from peptide adsorption to membrane lysis were examined in real time by changes in bilayer birefringence (lipid molecular ordering) as a function of membrane-bound peptide mass. Aurein 1.2 bound weakly without any change in membrane ordering at low peptide concentration (5 μM), indicating a surface-associated state without significant perturbation in membrane structure. At 10 μM peptide, marked reversible changes in molecular ordering were observed for all membranes except DMPE/DMPG. However, at 20 μM aurein 1.2, removal of lipid molecules, as determined by mass loss with a concomitant decrease in birefringence during the association phase, was observed for DMPC and DMPC/DMPG SLBs, which indicates membrane lysis by aurein. The membrane destabilisation induced by aurein 1.2 showed cooperativity at a particular peptide/lipid ratio with a critical mass/molecular ordering value. Furthermore, the extent of membrane lysis for DMPC/DMPG was nearly double that for DMPC. However, no lysis was observed for DMPC/DMPG/cholesterol, DMPE/DMPG and E. coli SLBs. The extent of birefringence changes with peptide mass suggested that aurein 1.2 binds to the membrane without inserting through the bilayer and membrane lysis occurs through detergent-like micellisation above a critical P/L ratio. Real-time quantitative analysis of the structural properties of membrane organisation has allowed the membrane destabilisation process to be resolved into multiple steps and provides comprehensive information to determine the molecular mechanism of aurein 1.2 action.     

Antimicrobial protegrin-1 forms amyloid-like fibrils with rapid kinetics suggesting a functional link

Protegrin-1 (PG-1) is an 18 residues long, cysteine-rich β-sheet antimicrobial peptide (AMP). PG-1 induces strong cytotoxic activities on cell membrane and acts as a potent antibiotic agent. Earlier we reported that its cytotoxicity is mediated by its channel-forming ability. In this study, we have examined the amyloidogenic fibril formation properties of PG-1 in comparison with a well-defined amyloid, the amyloid-β (Aβ_1–42) peptide. We have used atomic force microscopy (AFM) and thioflavin-T staining to investigate the kinetics of PG-1 fibrils growth and molecular dynamics simulations to elucidate the underlying mechanism. AFM images of PG-1 on a highly hydrophilic surface (mica) show fibrils with morphological similarities to Aβ_1–42 fibrils. Real-time AFM imaging of fibril growth suggests that PG-1 fibril growth follows a relatively fast kinetics compared to the Aβ_1–42 fibrils. The AFM results are in close agreement with results from thioflavin-T staining data. Furthermore, the results indicate that PG-1 forms fibrils in solution. Significantly, in contrast, we do not detect fibrillar structures of PG-1 on an anionic lipid bilayer 2-dioleoyl-sn-glycero-3-phospho-L-serine/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine; only small PG-1 oligomers can be observed. Molecular dynamics simulations are able to identify the presence of these small oligomers on the membrane bilayer. Thus, our current results show that cytotoxic AMP PG-1 is amyloidogenic and capable of forming fibrils. Overall, comparing β-rich AMPs and amyloids such as Aβ, in addition to cytotoxicity and amyloidogenicity, they share a common structural motif, and are channel forming. These combined properties support a functional relationship between amyloidogenic peptides and β-sheet-rich cytolytic AMPs, suggesting that amyloids channels may have an antimicrobial function.     

Structural effects of the antimicrobial peptide maculatin 1.1 on supported lipid bilayers

The interactions of the antimicrobial peptide maculatin 1.1 (GLFGVLAKVAAHVVPAIAEHF-NH₂) with model phospholipid membranes were studied by use of dual polarisation interferometry and neutron reflectometry and dimyristoylphosphatidylcholine (DMPC) and mixed DMPC–dimyristoylphosphatidylglycerol (DMPG)-supported lipid bilayers chosen to mimic eukaryotic and prokaryotic membranes, respectively. In DMPC bilayers concentration-dependent binding and increasing perturbation of bilayer order by maculatin were observed. By contrast, in mixed DMPC–DMPG bilayers, maculatin interacted more strongly and in a concentration-dependent manner with retention of bilayer lipid order and structure, consistent with pore formation. These results emphasise the importance of membrane charge in mediating antimicrobial peptide activity and emphasise the importance of using complementary methods of analysis in probing the mode of action of antimicrobial peptides.     

Membrane thinning effect of the beta-sheet antimicrobial protegrin

Lipid bilayers containing the antimicrobial peptide protegrin-1 (PG-1) were studied by lamellar X-ray diffraction. Previously, we have shown that the peptide exists in two distinct states when associated with lipid bilayers depending on the peptide concentration [Heller, W. T., Waring, A. J., Lehrer, R. I., and Huang, H. W. (1998) Biochemistry 37, 17331-17338]. For concentrations below a lipid-dependent threshold, PG-1 exhibits a unique oriented circular dichroism spectrum called the S state. X-ray experiments show that in this state PG-1 decreases the thickness of the lipid bilayer in proportion to the peptide concentration, similar to alamethicin's membrane thinning effect. This indicates that the S state is adsorbed in the headgroup region of the lipid bilayer, where the peptide is in an inactive state. For PG-1 above the threshold concentration, X-ray diffraction shows that the interaction between the peptide and the bilayer changes significantly. These results suggest that PG-1 has the same concentration-gated mechanism of action as alamethicin.     

Structures of β-hairpin antimicrobial protegrin peptides in lipopolysaccharide membranes: mechanism of gram selectivity obtained from solid-state nuclear magnetic resonance

The structural basis for the gram selectivity of two disulfide-bonded β-hairpin antimicrobial peptides (AMPs) is investigated using solid-state nuclear magnetic resonance (NMR) spectroscopy. The hexa-arginine PG-1 exhibits potent activities against both gram-positive and gram-negative bacteria, while a mutant of PG-1 with only three cationic residues maintains gram-positive activity but is 30-fold less active against gram-negative bacteria. We determined the topological structure and lipid interactions of these two peptides in a lipopolysaccharide (LPS)-rich membrane that mimics the outer membrane of gram-negative bacteria and in the POPE/POPG membrane, which mimics the membrane of gram-positive bacteria. (31)P NMR line shapes indicate that both peptides cause less orientational disorder in the LPS-rich membrane than in the POPE/POPG membrane. (13)C chemical shifts and (13)C-(1)H dipolar couplings show that both peptides maintain their β-hairpin conformation in these membranes and are largely immobilized, but the mutant exhibits noticeable intermediate-time scale motion in the LPS membrane at physiological temperature, suggesting shallow insertion. Indeed, (1)H spin diffusion from lipid chains to the peptides shows that PG-1 fully inserts into the LPS-rich membrane whereas the mutant does not. The (13)C-(31)P distances between the most hydrophobically embedded Arg of PG-1 and the lipid (31)P are significantly longer in the LPS membrane than in the POPE/POPG membrane, indicating that PG-1 does not cause toroidal pore defects in the LPS membrane, in contrast to its behavior in the POPE/POPG membrane. Taken together, these data indicate that PG-1 causes transmembrane pores of the barrel-stave type in the LPS membrane, thus allowing further translocation of the peptide into the inner membrane of gram-negative bacteria to kill the cells. In comparison, the less cationic mutant cannot fully cross the LPS membrane because of weaker electrostatic attractions, thus causing weaker antimicrobial activities. Therefore, strong electrostatic attraction between the peptide and the membrane surface, ensured by having a sufficient number of Arg residues, is essential for potent antimicrobial activities against gram-negative bacteria. The data provide a rational basis for controlling gram selectivity of AMPs by adjusting the charge densities.     

Deletion of all cysteines in tachyplesin I abolishes hemolytic activity and retains antimicrobial activity and lipopolysaccharide selective binding

Tachyplesin I is a cyclic beta-sheet antimicrobial peptide isolated from the hemocytes of Tachypleus tridentatus. The four cysteine residues in tachyplesin I play a structural role in imparting amphipathicity to the peptide which has been shown to be essential for its activity. We investigated the role of amphipathicity using an analogue of tachyplesin I (TP-I), CDT (KWFRVYRGIYRRR-NH(2)), in which all four cysteines were deleted. Like TP-I, CDT shows antimicrobial activity and disrupts Escherichia coli outer membrane and model membranes mimicking bacterial inner membranes at micromolar concentrations. The CDT peptide does not cause hemolysis up to 200 microg/mL while TP-I showed about 10% hemolysis at 100 microg/mL and about 25% hemolysis at 150 microg/mL. Peptide-into-lipid titrations under isothermal conditions reveal that the interaction of CDT with lipid membranes is an enthalpy-driven process. Binding assays performed using fluorometry demonstrate that the peptide CDT binds and inserts into only negatively charged membranes. The peptide-induced thermotropic phase transition of MLVs formed of DMPC and the DMPC/DMPG (7:3) mixture suggests specific lipid-peptide interactions. The circular dichroism study shows that the peptide exists as an unordered structure in an aqueous buffer and adopts a more ordered beta-structure upon binding to negatively charged membrane. The NMR data suggest that CDT binding to negatively charged bilayers induces a change in the lipid headgroup conformation with the lipid headgroup moving out of the bilayer surface toward the water phase, and therefore, a barrel stave mechanism of membrane disruption is unlikely as the peptide is located near the headgroup region of lipids. The lamellar phase (31)P chemical shift spectra observed at various concentrations of the peptide in bilayers suggest that the peptide may function neither via fragmentation of bilayers nor by promoting nonlamellar structures. NMR and fluorescence data suggest that the presence of cholesterol inhibits the peptide binding to the bilayers. These properties help to explain that cysteine residues may not contribute to antimicrobial activity and that the loss of hemolytic activity is due to lack of hydrophobicity and amphipathicity.     

Interaction of protegrin-1 with lipid bilayers: membrane thinning effect

Protegrins (PG) are important in defending host tissues, preventing infection via an attack on the membrane surface of invading microorganisms. Protegrins have powerful antibiotic abilities, but the molecular-level mechanisms underlying the interactions of their beta-sheet motifs with the membrane are not known. Protegrin-1 (PG-1) is composed of 18 amino acids with a high content of basic residues and two disulfide bonds. Here we focused on the stability of PG-1 at the amphipathic interface in lipid bilayers and on the details of the peptide-membrane interactions. We simulated all-atom models of the PG-1 monomer with explicit water and lipid bilayers composed of both homogeneous POPC (palmitoyl-oleyl-phosphatidylcholine) lipids and a mixture of POPC/POPG (palmitoyl-oleyl-phosphatidylglycerol) (4:1) lipids. We observed that local thinning of the lipid bilayers mediated by the peptide is enhanced in the lipid bilayer containing POPG, consistent with experimental results of selective membrane targeting. The beta-hairpin motif of PG-1 is conserved in both lipid settings, whereas it is highly bent in aqueous solution. The conformational dynamics of PG-1, especially the highly charged beta-hairpin turn region, are found to be mostly responsible for disturbing the membrane. Even though the eventual membrane disruption requires PG-1 oligomers, our simulations clearly show the first step of the monomeric effects. The thinning effects in the bilayer should relate to pore/channel formation in the lipid bilayer and thus be responsible for further defects in the membrane caused by oligomer.     

Effects of arginine density on the membrane-bound structure of a cationic antimicrobial peptide from solid-state NMR

Solid-state NMR spectroscopy is used to determine the membrane-bound topological structure of a cationic β-hairpin antimicrobial peptide in which the number of Arg residues has been halved. The parent peptide, PG-1, was previously found to form transmembrane β-barrels in anionic membranes where the Arg residues complex with the lipid phosphate groups to cause toroidal pore defects in the membrane. In comparison, the charge-attenuated and less active mutant studied here forms β-sheets that lie on the surface of the zwitterionic membrane and only partially insert into the anionic membrane. The mutant also exhibits much looser contact with the lipid headgroups. These results indicate that transmembrane insertion and tight Arg-phosphate association are two important elements for strong antimicrobial activities of this class of peptides. Comparison with other β-hairpin antimicrobial peptides studied so far further suggests a relative potency scale for the various mechanisms of action for the β-sheet family of antimicrobial peptides. The transmembrane insertion-toroidal pore mechanism is the most potent in disrupting the lipid bilayer, followed by the large-amplitude in-plane motional mechanism. The carpet model, where peptides aggregate on the membrane surface to cause lateral expansion and eventual micellization of the membrane, is a weaker mechanism of action.     

Solid-state NMR investigation of the depth of insertion of protegrin-1 in lipid bilayers using paramagnetic Mn2+

The depth of insertion of an antimicrobial peptide, protegrin-1 (PG-1), in lipid bilayers is investigated using solid-state NMR. Paramagnetic Mn(2+) ions bind to the surface of lipid bilayers and induce distance-dependent dipolar relaxation of nuclear spins. By comparing the signal dephasing of the peptide with that of the lipids, whose segmental depths of insertion are known, we determined the depths of several residues of PG-1 in 1,2 dilauryl-sn-glycero-3-phosphotidylcholine (DLPC) bilayers. We found that residues G2 at the N-terminus and F12 at the beta-turn of the peptide reside near the membrane surface, whereas L5 and V16 are embedded in the acyl chain region. The depths increase in the order of G2 < F12 < L5 < V16. These intensity-dephasing results are confirmed by direct measurement of the paramagnetically enhanced (13)C transverse relaxation rates. The relative depths indicate that PG-1 is tilted from the bilayer normal, which is consistent with independent solid-state NMR measurements of PG-1 orientation in the same lipids (Yamaguchi et al., 2001). They also indicate that PG-1 is fully immersed in the lipid bilayer. However, a quantitative mismatch between the bilayer thickness and PG-1 length suggests a local thinning of the DLPC bilayer by 8-10 A. The depth sensitivity of this Mn(2+) dephasing technique is tunable with the Mn(2+) concentration to focus on different regions of the lipid bilayer.     

Antimicrobial Protegrin-1 Forms Ion Channels: Molecular Dynamic Simulation, Atomic Force Microscopy, and Electrical Conductance Studies

Antimicrobial peptides (AMPs) are an emerging class of antibiotics for controlling health effects of antibiotic-resistant microbial strains. Protegrin-1 (PG-1) is a model antibiotic among β-sheet AMPs. Antibiotic activity of AMPs involves cell membrane damage, yet their membrane interactions, their 3D membrane-associated structures and the mechanism underlying their ability to disrupt cell membrane are poorly understood. Using complementary approaches, including molecular dynamics simulations, atomic force microscopy (AFM) imaging, and planar lipid bilayer reconstitution, we provide computational and experimental evidence that PG-1, a β-hairpin peptide, forms ion channels. Simulations indicate that PG-1 forms channel-like structures with loosely attached subunits when reconstituted in anionic lipid bilayers. AFM images show the presence of channel-like structures when PG-1 is reconstituted in dioleoylphosphatidylserine/palmitoyloleoyl phosphatidylethanolamine bilayers or added to preformed bilayers. Planar lipid bilayer electrical recordings show multiple single channel conductances that are consistent with the heterogeneous oligomeric channel structures seen in AFM images. PG-1 channel formation seems to be lipid-dependent: PG-1 does not easily show ion channel electrical activity in phosphatidylcholine membranes, but readily shows channel activity in membranes rich in phosphatidylethanolamine or phosphatidylserine. The combined results support a model wherein the β-hairpin PG-1 peptide acts as an antibiotic by altering cell ionic homeostasis through ion channel formation in cell membranes.     

Beyond electrostatics: Antimicrobial peptide selectivity and the influence of cholesterol-mediated fluidity and lipid chain length on protegrin-1 activity

Antimicrobial peptides (AMPs) are a promising class of innate host defense molecules for next-generation antibiotics, as they uniquely target and permeabilize membranes of pathogens. This selectivity has been explained by the electrostatic attraction between these predominantly cationic peptides and the bacterial membrane, which is heavily populated with anionic lipids. However, AMP-resistant bacteria have non-electrostatic countermeasures that modulate membrane rigidity and thickness. We explore how variations in physical properties affect the membrane affinity and disruption process of protegrin-1 (PG-1) in phosphatidylcholine (PC) membranes with altered lipid packing densities and thicknesses. From isothermal titration calorimetry and atomic force microscopy, our results showed that PG-1 could no longer insert into membranes of increasing cholesterol amounts nor into monounsaturated PC membranes of increasing thicknesses with similar fluidities. Prevention of PG-1’s incorporation consequently made the membranes more resistant to peptide-induced structural transformations like pore formation. Our study provides evidence that AMP affinity and activity are strongly correlated with the fluidity and thickness of the membrane. A basic understanding of how physical mechanisms can regulate cell selectivity and resistance towards AMPs will aid in the development of new antimicrobial agents.     

Solid-state NMR investigations of peptide-lipid interaction and orientation of a beta-sheet antimicrobial peptide,protegrin

Protegrin-1 (PG-1) is a broad-spectrum beta-sheet antimicrobial peptide found in porcine leukocytes. The mechanism of action and the orientation of PG-1 in lipid bilayers are here investigated using (2)H, (31)P, (13)C, and (15)N solid-state NMR spectroscopy. (2)H spectra of mechanically aligned and chain-perdeuterated 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC) bilayers indicate that PG-1 at high concentrations destroys the orientational order of the aligned lamellar bilayer. The conformation of the lipid headgroups in the unoriented region is significantly altered, as seen from the (31)P spectra of POPC and the (2)H spectra of headgroup-deuterated 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine. These observations indicate that PG-1 disrupts microbial membranes by breaking the extended bilayer into smaller disks, where a significant fraction of lipids is located in the edges of the disks with a distribution of orientations. These edges allow the lipid bilayer to bend back on itself as in toroidal pores. Interestingly, this loss of bilayer orientation occurs only in long-chain lipids such as POPC and not in shorter chain lipids such as 1,2-dilauroyl-sn-glycero-3-phosphatidylcholine (DLPC). To understand the mode of binding of PG-1 to the lipid bilayer, we determined the orientation of PG-1 in DLPC bilayers. The (13)CO and (15)N chemical shifts of Val-16 labeled PG-1 indicate that the beta-strand axis is tilted by 55 degrees +/- 5 degrees from the bilayer normal while the normal of the beta-sheet plane is 48 degrees +/- 5 degrees from the bilayer normal. This orientation favors interaction of the hydrophobic backbone of the peptide with the hydrophobic core of the bilayer and positions the cationic Arg side chains to interact with the anionic phosphate groups. This is the first time that the orientation of a disulfide-stabilized beta-sheet membrane peptide has been determined by solid-state NMR.     

Characterization of the structure and membrane interaction of the antimicrobial peptides aurein 2.2 and 2.3 from Australian southern bell frogs

The structure and membrane interaction of the antimicrobial peptide aurein 2.2 (GLFDIVKKVVGALGSL-CONH(2)), aurein 2.3 (GLFDIVKKVVGAIGSL-CONH(2)), both from Litoria aurea, and a carboxy C-terminal analog of aurein 2.3 (GLFDIVKKVVGAIGSL-COOH) were studied to determine which features of this class of peptides are key to activity. Circular dichroism and solution-state NMR data indicate that all three peptides adopt an alpha-helical structure in the presence of trifluoroethanol or lipids such as 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and a 1:1 mixture of DMPC and 1,2-dimyristoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (DMPG). Oriented circular dichroism was used to determine the orientation of the peptides in lipid bilayers over a range of concentrations (peptide/lipid molar ratios (P/L) = 1:15-1:120) in DMPC and 1:1 DMPC/DMPG, in the liquid crystalline state. The results demonstrate that in DMPC all three peptides are surface adsorbed over a range of low peptide concentrations but insert into the bilayers at high peptide concentrations. This finding is corroborated by (31)P-solid-state NMR data of the three peptides in DMPC, which shows that at high peptide concentrations the peptides perturb the membrane. Oriented circular dichroism data of the aurein peptides in 1:1 DMPC/DMPG, on the other hand, show that the peptides with amidated C-termini readily insert into the membrane bilayers over the concentration range studied (P/L = 1:15-1:120), whereas the aurein 2.3 peptide with a carboxy C-terminus inserts at a threshold concentration of P/L* between 1:80 and 1:120. Overall, the data presented here suggest that all three peptides studied interact with phosphatidylcholine membranes in a manner which is similar to aurein 1.2 and citropin 1.1, as reported in the literature, with no correlation to the reported activity. On the other hand, both aurein 2.2 and aurein 2.3 behave similarly in phosphatidylcholine/phosphatidylglycerol (PC/PG) membranes, whereas aurein 2.3-COOH inserts less readily. As this does not correlate with reported activities, minimal inhibitory concentrations of the three peptides against Staphylococcus aureus (strain C622, ATCC 25923) and Staphylococcus epidermidis (strain C621--clinical isolate) were determined. The correlation between structure, membrane interaction, and activity are discussed in light of these results.     

Membrane thinning due to antimicrobial peptide binding: an atomic force microscopy study of MSI-78 in lipid bilayers

The interaction of an antimicrobial peptide, MSI-78, with phospholipid bilayers has been investigated using atomic force microscopy, circular dichroism, and nuclear magnetic resonance (NMR). Binding of amphipathic peptide helices with their helical axis parallel to the membrane surface leads to membrane thinning. Atomic force microscopy of supported 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) bilayers in the presence of MSI-78 provides images of the membrane thinning process at a high spatial resolution. This data reveals that the membrane thickness is not reduced uniformly over the entire bilayer area. Instead, peptide binding leads to the formation of distinct domains where the bilayer thickness is reduced by 1.1 +/- 0.2 nm. The data is interpreted using a previously published geometric model for the structure of the peptide-lipid domains. In this model, the peptides reside at the hydrophilic-hydrophobic boundary in the lipid headgroup region, which leads to an increased distance between lipid headgroups. This picture is consistent with concentration-dependent 31P and 2H NMR spectra of MSI-78 in mechanically aligned DMPC bilayers. Furthermore, 2H NMR experiments on DMPC-d54 multilamellar vesicles indicate that the acyl chains of DMPC are highly disordered in the presence of the peptide as is to be expected for the proposed structure of the peptide-lipid assembly.     

Insertion selectivity of antimicrobial peptide protegrin-1 into lipid monolayers: Effect of head group electrostatics and tail group packing

The ability to selectively target the harmful microbial membrane over that of the host cell is one of the most important characteristics of the antimicrobial peptides (AMPs). This selectivity strongly depends on the chemical and structural properties of the lipids that make up the cell membrane. A systematic study of the initial membrane selectivity of protegrin-1 (PG-1), a β-sheet AMP, was performed using Langmuir monolayers. Constant pressure insertion assay was used to quantify the amount of PG-1 insertion and fluorescence microscopy was employed to observe the effect of PG-1 on lipid ordering. Charge and packing properties of the monolayer were altered by using lipids with different head groups, substituting saturated with unsaturated lipid tail group(s) and incorporating spacer molecules. PG-1 inserted most readily into anionic films composed of phosphatidylglycerol (PG) and lipid A, consistent with its high selectivity for microbial membranes. It also discriminated between zwitteranionic phospholipids, inserting more readily into phosphatidylcholine (PC) monolayers than those composed of phosphatidylethanolamine, potentially explaining why PG-1 is hemolytic for PC-rich human erythrocytes and not for the PE-rich erythrocytes of ruminants. Increased packing density of the monolayer by increased surface pressure, increased tail group saturation or incorporation of dihydrocholesterol diminishes the insertion of PG-1. Fluorescence microscopy shows that lipid packing is disordered upon PG-1 insertion. However, the presence of PG-1 can still affect lipid morphology even with no observed PG-1 insertion. These results show the important role that lipid composition of the cell membrane plays in the activity of AMPs.     

Insertion selectivity of antimicrobial peptide protegrin-1 into lipid monolayers: effect of head group electrostatics and tail group packing

The ability to selectively target the harmful microbial membrane over that of the host cell is one of the most important characteristics of the antimicrobial peptides (AMPs). This selectivity strongly depends on the chemical and structural properties of the lipids that make up the cell membrane. A systematic study of the initial membrane selectivity of protegrin-1 (PG-1), a beta-sheet AMP, was performed using Langmuir monolayers. Constant pressure insertion assay was used to quantify the amount of PG-1 insertion and fluorescence microscopy was employed to observe the effect of PG-1 on lipid ordering. Charge and packing properties of the monolayer were altered by using lipids with different head groups, substituting saturated with unsaturated lipid tail group(s) and incorporating spacer molecules. PG-1 inserted most readily into anionic films composed of phosphatidylglycerol (PG) and lipid A, consistent with its high selectivity for microbial membranes. It also discriminated between zwitteranionic phospholipids, inserting more readily into phosphatidylcholine (PC) monolayers than those composed of phosphatidylethanolamine, potentially explaining why PG-1 is hemolytic for PC-rich human erythrocytes and not for the PE-rich erythrocytes of ruminants. Increased packing density of the monolayer by increased surface pressure, increased tail group saturation or incorporation of dihydrocholesterol diminishes the insertion of PG-1. Fluorescence microscopy shows that lipid packing is disordered upon PG-1 insertion. However, the presence of PG-1 can still affect lipid morphology even with no observed PG-1 insertion. These results show the important role that lipid composition of the cell membrane plays in the activity of AMPs.     

Membrane interaction and perturbation mechanisms induced by two cationic cell penetrating peptides with distinct charge distribution

Independently from the cell penetrating peptide uptake mechanism (endocytic or not), the interaction of the peptide with the lipid bilayer remains a common issue that needs further investigation. The cell penetrating or antimicrobial properties of exogenous peptides require probably different preliminary interactions with the plasma membrane. Herein, we have employed (31)P NMR, differential scanning calorimetry and CD to study the membrane interaction and perturbation mechanisms of two basic peptides with similar length but distinct charge distribution, penetratin (non-amphipathic) and RL16, a secondary amphipathic peptide. The peptide effects on the thermotropic phase behavior of large multilamellar vesicles of dimyristoylphosphatidylcholine (DMPC), dimyristoylphosphatidylglycerol (DMPG) and dipalmitoleoyl phosphatidylethanolamine (DiPoPE) were investigated. We have found that, even though both peptides are cationic, their interaction with zwitterionic versus anionic lipids is markedly distinct. Penetratin greatly affects the temperature, enthalpy and cooperativity of DMPG main phase transition but does not affect those of DMPC while RL16 presents opposite effects. Additionally, it was found that penetratin induces a negative curvature whereas RL16 induces a positive one, since a decrease in the fluid lamellar to inverted hexagonal phase transition temperature of DiPoPE (T(H)) was observed for penetratin and an increase for RL16. Contrary to penetratin, (31)P NMR of samples containing DMPC MLVs and RL16 shows an isotropic signal indicative of the formation of small vesicles, concomitant with a great decrease in sample turbidity both below and at the phase transition temperature. Opposite effects were also observed on DMPG where both peptides provoke strong aggregation and precipitation. Both CPPs adopt helical structures when contacting with anionic lipids, and possess a dual behavior by either presenting their cationic or hydrophobic domains towards the phospholipid face, depending on the lipid nature (anionic vs zwitterionic, respectively). Surprisingly, the increase of electrostatic interactions at the water membrane interface prevents the insertion of RL16 hydrophobic region in the bilayer, but is essential for the interaction of penetratin. Modulation of amphipathic profiles and charge distribution of CPPs can alter the balance of hydrophobic and electrostatic membrane interaction leading to translocation or and membrane permeabilisation. Penetratin has a relative pure CPP behavior whereas RL16 presents mixed CPP/AMP properties. A better understanding of those processes is essential to unveil their cell translocation mechanism.     

Membrane-bound dimer structure of a beta-hairpin antimicrobial peptide from rotational-echo double-resonance solid-state NMR

The intermolecular packing of a beta-hairpin antimicrobial peptide, PG-1, in lipid bilayers is determined using solid-state NMR distance measurements. Previous spin counting experiments showed that PG-1 associates as dimers in POPC bilayers; however, the detailed dimer structure was unknown. We have now measured several intermolecular 13C-19F, 1H-13C, and 15N-13C distances in site-specifically labeled PG-1 to constrain the structure of the intermolecular interface. The distances are measured using the rotational-echo double-resonance (REDOR) technique under magic-angle spinning. The results indicate that two PG-1 molecules align in a parallel fashion with the C-terminal strand of the hairpin forming the dimer interface. Six hydrogen bonds stabilize this interface, and the Phe12 side chain adopts the g- conformation in the membrane as in solution. The parallel packing of the peptide in the lipid bilayer differs from the antiparallel dimer found in DPC micelles and may be stabilized by its strong amphipathic character, which should facilitate its insertion into the amphipathic lipid bilayer. This study demonstrates the utility of the REDOR NMR technique for the elucidation of the oligomeric structure of membrane proteins.