Preparation and characterization of N-(2-carboxybenzyl)chitosan as a potential pH-sensitive hydrogel for drug delivery

A novel water-soluble chitosan derivative [N-(2-carboxybenzyl)chitosan, CBCS] was synthesized. The chemical structure of CBCS was characterized by FTIR, (1)H NMR and UV spectroscopies. The degree of substitution (DS) of N-2-carboxybenzyl was determined by colloid titration. In different pH buffer solutions, the swelling characteristics of hydrogels based on CBCS (CBCSG) prepared by crosslinking with glutaraldehyde have been studied. Results showed that the swelling ratio (SR) of CBCSG decreased with an increase of the amount of glutaraldehyde, and that CBCSG swelled more significantly in alkaline solution than in acidic medium, showing the lowest SR at pH5.0. The SR of CBCSG increased with the raising of the DS of the N-2-carboxybenzyl group in alkaline solution, but no significant change was observed in an acidic environment. CBCSG showed swelling reversibility when alternately soaked in pH1.0 and 7.4 buffer solutions. Release profiles of fluorouracil (5-FU), a poorly water-soluble drug, from CBCSG were studied under both simulated gastric and intestinal pHconditions. The release was much quicker in pH7.4 buffer than in pH1.0 solution. Results indicated that CBCS could be a potential pH-sensitive carrier for colon-specific drug delivery system.     

Design and development of hydrogel beads for targeted drug delivery to the colon

The purpose of this research was to develop and evaluate a multiparticulate system of chitosan hydrogel beads exploiting pH-sensitive property and specific biodegradability for colon-targeted delivery of satranidazole. Chitosan hydrogel beads were prepared by the cross-linking method followed by enteric coating with Eudragit S100. All formulations were evaluated for particle size, encapsulation efficiency, swellability, and in vitro drug release. The size of the beads was found to range from 1.04±0.82 mm to 1.95±0.05 mm. The amount of the drug released after 24 hours from the formulation was found to be 97.67%±1.25% in the presence of extracellular enzymes as compared with 64.71%±1.91% and 96.52%±1.81% release of drug after 3 and 6 days of enzyme induction, respectively, in the presence of 4% cecal content. Degradation of the chitosan hydrogel beads in the presence of extracellular enzymes as compared with rat cecal and colonic enzymes indicates the potential of this multiparticulate system to serve as a carrier to deliver macromolecules specifically to the colon and can be offered as a substitute in vitro system for performing degradation studies. Studies demonstrated that orally administered chitosan hydrogel beads can be used effectively for the delivery of drug to the colon. Published: July 13, 2007     

Synthesis and characterization of a hemoglobin-ribavirin conjugate for targeted drug delivery

A novel conjugate of human hemoglobin (Hb) and the nucleoside analogue ribavirin (RBV) was synthesized to demonstrate the utility of Hb as a biocompatible drug carrier for improved drug delivery in the treatment of liver disease. RBV is used in combination with interferon for the treatment of hepatitis C, but its side effects can result in dose limitation or discontinuation of treatment. Targeted delivery of RBV may help to prevent or minimize its toxicity. The hemoglobin-ribavirin conjugate (Hb-RBV) was designed to release bioactive drug upon endocytosis by cells and tissues involved in extracellular Hb catabolism and clearance. Ribavirin-5'-monophosphate (RBV-P) was prepared from RBV and activated as the 5'-monophosphorimidazolide (RBV-P-Im) for reaction with carbonmonoxyhemoglobin to yield Hb-RBV consisting of multiple RBV drugs covalently attached as physiologically labile phosphoramidates via their 5'-hydroxyl groups. A molar drug ratio of six to eight RBV molecules per Hb tetramer was obtained with near complete haptoglobin (Hp) binding of the drug modified Hb maintained. The conjugate complex (Hp-Hb-RBV) was selectively taken up in vitro by cells that express the hemoglobin-haptoglobin receptor, CD163. Recovered ribavirin enzymatically cleaved from Hb-RBV showed equipotent antiproliferative activity compared to control unconjugated RBV against human HepG2 and mouse AML12 liver cell lines. Based upon the reported high level of Hb uptake in the liver, Hb-RBV may be useful in the treatment of certain liver diseases, as well as inflammatory disorders associated with CD163-positive macrophages.     

Hyaluronic acid modified pH-sensitive liposomes for targeted intracellular delivery of doxorubicin

Context: Surface-modified pH-sensitive liposomal system may be useful for intracellular delivery of chemotherapeutics.

Objective: Achieving site-specific targeting with over-expressed hyaluronic acid (HA) receptors along with using pH sensitive liposome carrier for intracellular drug delivery was the aim of this study.

Materials and methods: Stealth HA-targeted pH-sensitive liposomes (SL-pH-HA) were developed and evaluated to achieve effective intracellular delivery of doxorubicin (DOX) vis–a-vis enhanced antitumor activity.

Results: The in vitro release studies demonstrated that the release of DOX from SL-pH-HA was pH-dependent, i.e. faster at mildly acidic pH ～5, compared to physiological pH ～7.4. SLpH-HA was evaluated for their cytotoxicity potential on CD44 receptor expressing MCF-7 cells. The half maximal inhibitory concentration (IC50) of SL-pH-HA and SL-HA were about 1.9 and 2.5?μM, respectively, after 48?h of incubation. The quantitative uptake study revealed higher localization of targeted liposomes in the receptor positive cells, which was further confirmed by fluorescent microscopy. The antitumor efficacy of the DOX-loaded HA-targeted pH-sensitive liposomes was also verified in a tumor xenograft mouse model.

Discussion: DOX was efficiently delivered to the tumor site by active targeting via HA and CD44 receptor interaction. The major side-effect of conventional DOX formulation, i.e. cardiotoxicity was also estimated by measuring serum enzyme levels of LDH and CPK and found to be minimized with developed formulation. Overall, HA targeted pH-sensitive liposomes were significantly more potent than the non-targeted liposomes in cells expressing high levels of CD44.

Conclusion: Results strongly implies the promise of such liposomal system as an intracellular drug delivery carrier developed for potential anticancer treatment.     

Cytosolic delivery of macromolecules: I. Synthesis and characterization of pH-sensitive acyloxyalkylimidazoles

A series of 1-(acyloxyalkyl)imidazoles (AAI) were synthesized by nucleophilic substitution of chloroalkyl esters of fatty acids with imidazole. The former was prepared from fatty acid chloride and an aldehyde. When incorporated into liposomes, these lipids show an apparent pK(a) value ranging from 5.12 for 1-(palmitoyloxymethyl)imidazole (PMI) to 5.29 for 1-[(alpha-myristoyloxy)ethyl]imidazole (alpha-MEI) as determined by a fluorescence assay. When the imidazole moiety was protonated, the lipids were surface-active, as demonstrated by hemolytic activity towards red blood cells. As expected, AAI were hydrolyzed in serum as well as in cell homogenate. They were significantly less toxic than biochemically stable N-dodecylimidazole (NDI) towards Chinese hamster ovary (CHO) and RAW 264.7 (RAW) cells as determined by MTT assay. When fed to RAW cells, fluorescein-labeled oligonucleotides encapsulated in liposomes containing 20 mol% 1-(stearoyloxymethyl)imidazole (SMI) resulted in punctate as well as partially diffuse fluorescence. In a functional assay involving down-regulation of luciferase in CV-1 cells, neutral liposomes containing imidazole lipids showed suboptimal delivery of antisense phosphorothioate oligomers. Taken together, the results suggest that AAI are of potential use in developing nontoxic, pH-sensitive liposomes. However, these liposomal formulations need to be optimized to achieve higher concentrations of pH-sensitive detergents within the endosome to facilitate efficient cytosolic release of liposome-entrapped contents.     

Preparation and properties of a pH/temperature-responsive carboxymethyl chitosan/poly(N-isopropylacrylamide)semi-IPN hydrogel for oral delivery of drugs

Thermo- and pH-responsive semi-IPN polyampholyte hydrogels were prepared by using carboxymethylchitosan and poly(N-isopropylacrylamide) with N,N'-methylenebisacrylamide (BIS) as the crosslinking agent. The swelling characteristics of these hydrogels at distinct compositions as a function of pH and temperature were investigated. It was found that the semi-IPN hydrogels demonstrated the pH- and temperature-responsive nature of the materials, and it also showed good reversibility. The study on the release of coenzyme A (CoA) showed that within 24h the cumulative release ratio of CoA was 22.6% in pH 2.1 solution and 89.1% in pH 7.4 solution at 37 degrees C, respectively. The release rate of CoA was higher at 37 degrees C than 25 degrees C in a pH 7.4 buffer solution. An increased release rate of CoA was observed with the content of carboxymethylchitosan increasing in the hydrogel at 25 degrees C in pH 7.4 solution. These results show that semi-IPN hydrogel seems to be of great promise in pH-temperature oral drug delivery systems.     

Synthesis and in vitro evaluation of carboxymethyl starch-chitosan nanoparticles as drug delivery system to the colon

The purpose of this study was to examine chitosan (CS)-carboxymethyl starch (CMS) nanoparticles as drug delivery system to the colon. The 5-aminosalicylic acid (5-ASA) was chosen as model drug molecule. CS-CMS nanoparticles were formulated by a complex coacervation process under mild conditions. The influence of process variables, including the two ionic polymers, on particle size, and nanoparticles entrapment of 5-ASA was studied. In vitro release of 5-ASA was also evaluated, and the integrity of 5-ASA in the release fraction was assessed using sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The release of 5-ASA from nanoparticle was based on the ion-exchange mechanism. The CS-CMS nanoparticles developed based on the modulation of ratio show promise as a system for controlled delivery of drug to the colon.     

Preparation and characterization of novel chitosan/gelatin membranes using chitosan hydrogel

Chitin and chitosan are novel biomaterials. The novel chitosan/gelatin membranes were prepared using the suspension of chitosan hydrogel mixed with gelatin. The prepared chitosan/gelatin membranes were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), mechanical, swelling, and thermal studies. The morphology of these chitosan/gelatin membranes was found to be very smooth and homogeneous. The XRD studies showed that the chitosan/gelatin membranes have good compatibility and interaction between the chitosan and gelatin. The stress and elongation of chitosan/gelatin membranes on wet condition showed excellent when the mixture ratio of gelatin was 0.50. The prepared chitosan/gelatin membranes showed good swelling, mechanical and thermal properties. Cell adhesion studies were also carried out using human MG-63 osteoblast-like cells. The cells incubated with chitosan/gelatin membranes for 24 h were capable of forming cell adhesion. Thus the prepared chitosan/gelatin membranes are bioactive and are suitable for cell adhesion suggesting that these membranes can be used for tissue-engineering applications. Therefore, these novel chitosan/gelatin membranes are useful for biomedical applications.     

Constructing a collagen hydrogel for the delivery of stem cell-loaded chitosan microspheres

Multipotent stem cells have been shown to be extremely useful in the field of regenerative medicine. However, in order to use these cells effectively for tissue regeneration, a number of variables must be taken into account. These variables include: the total volume and surface area of the implantation site, the mechanical properties of the tissue and the tissue microenvironment, which includes the amount of vascularization and the components of the extracellular matrix. Therefore, the materials being used to deliver these cells must be biocompatible with a defined chemical composition while maintaining a mechanical strength that mimics the host tissue. These materials must also be permeable to oxygen and nutrients to provide a favorable microenvironment for cells to attach and proliferate. Chitosan, a cationic polysaccharide with excellent biocompatibility, can be easily chemically modified and has a high affinity to bind with in vivo macromolecules. Chitosan mimics the glycosaminoglycan portion of the extracellular matrix, enabling it to function as a substrate for cell adhesion, migration and proliferation. In this study we utilize chitosan in the form of microspheres to deliver adipose-derived stem cells (ASC) into a collagen based three-dimensional scaffold. An ideal cell-to-microsphere ratio was determined with respect to incubation time and cell density to achieve maximum number of cells that could be loaded. Once ASC are seeded onto the chitosan microspheres (CSM), they are embedded in a collagen scaffold and can be maintained in culture for extended periods. In summary, this study provides a method to precisely deliver stem cells within a three dimensional biomaterial scaffold.     

Synthesis of cholesterol-carborane conjugate for targeted drug delivery

The cholesterol-carborane conjugate has been designed and synthesized to selectively deliver boron to tumor cells by means of reconstituted low-density lipoprotein. The chemical stability and cytotoxicity of the new compound have been examined. Several methods have been evaluated for incorporation of the compound into LDL.     

Synthesis of galactosyl compounds for targeted gene delivery

Cell-specific DNA delivery offers a great potential for targeted gene therapy. Toward this end, we have synthesized a series of compounds carrying galactose residues as a targeting ligand for asialoglycoprotein receptors of hepatocytes and primary amine groups as a functional domain for DNA binding. Biological activity of these galactosyl compounds in DNA delivery was evaluated in HepG2 and BL-6 cells and compared with respect to the number of galactose residues as well as primary amine groups in each molecule. Transfection experiments using a firefly luciferase gene as a reporter revealed that compounds with multivalent binding properties were more active in DNA delivery. An optimal transfection activity in HepG2 cells requires seven primary amine groups and a minimum of two galactose residues in each molecule. The transfection activity of compounds carrying multi-galactose residues can be inhibited by asialofetuin, a natural substrate for asialoglycoprotein receptors of hepatocytes, suggesting that gene transfer by these galactosyl compounds is asialoglycoprotein receptor-mediated. These results provide direct evidence in support of our new strategy for the use of small and synthetic compounds for cell specific and targeted gene delivery.     

Encapsulation of ciprofloxacin within modified xanthan gum- chitosan based hydrogel for drug delivery

The aim of the present work was to investigate the preparation of polyelectrolyte hydrogel as potential drug carrier for antibacterial Ciprofloxacin drug (CFX), intended for controlled release formulation. Hydrogel of N-trimehtyl chitosan (TMC)/sodium carboxymethyl xanthan gum (CMXG) was prepared and ciprofloxacin was employed as a model drug to investigate the loading and release performance of the prepared hydrogel. FTIR, DSC, TGA and SEM analysis were used to characterize the TMC/CMXG hydrogel and its CFX loaded hydrogel. The results showed that the ciprofloxacin was successfully incorporated and released from the prepared hydrogel without the loss of structural integrity or the change in its functionality. The encapsulation efficiency of CFX within the prepared hydrogel was found to be increased with increasing the concentration of drug reaching about 93.8 ± 2.1% with concentration of CFX 250 µg/ml. It was shown also that the drug is entrapped within the gel without significant interaction as confirmed from FTIR spectra and DSC analysis. In vitro release study in phosphate buffer saline (PBS), indicated the steady rise in cumulative drug release with the highest release amount, reaching about 96.1 ± 1.8% up to 150 min, whereby the gel with high drug loading efficiency (3.52 ± 0.07%) displayed faster and higher release rate than that of gel containing a smaller amount of drug (0.44 ± 0.01%). The release kinetics of loaded drug followed zero-order kinetics. CFX drug loaded hydrogel showed high activity against the gram positive and gram negative bacterial strains due to the successful released of CFX from the CFX loaded hydrogel into the tested bacterial strains with the highest diameter of inhibition zone against Escherichia coli (67.0 ± 1.0) as compared to reference antibiotic, Gentamicin (28 ± 0.5). Cytotoxicity of the prepared hydrogel was examined in vitro using lung human normal cell lines and showed the highest cell viability (97 ± 0.5%) at concentration up to 50 µg/ml. Consequently, TMC/CMXG hydrogel can be proposed as new controlled release drug delivery system.     

Synthesis of novel pH-sensitive chitosan graft copolymers and micellar solubilization of paclitaxel

Herein, highly pH-sensitive graft copolymers, N-octyl-N-(2-carboxylbenzoyl) chitosan derivatives, were synthesized and characterized by FTIR, ¹H NMR, ¹³C NMR, differential scanning calorimetry and X-ray diffraction spectrometry. The polymers can form micelles solublizing paclitaxel, with critical micellar concentrations ranged from 0.07 to 0.32 mg/ml, drug-loading rate ranged from 30.7% to 65.3% and entrapment efficiency ranged from 44.2% to 61.4%. Additionally, the result shows that the micelles display highly sensitivity to mildly acidic pH while reasonably stable at physiologic pH, which might pave the way for building pharmaceutical nanocarriers specifically releasing cargo at certain pathological sites of body.     

Synthesis of folate-functionalized RAFT polymers for targeted siRNA delivery

Receptor-mediated, cell-specific delivery of siRNA enables silencing of target genes in specific tissues, opening the door to powerful therapeutic options for a multitude of diseases. However, the development of delivery systems capable of targeted and effective siRNA delivery typically requires multiple steps and the use of sophisticated, orthogonal chemistries. Previously, we developed diblock copolymers consisting of dimethaminoethyl methacrylate-b-dimethylaminoethyl methacrylate-co-butyl methacrylate-co-propylacrylic acid as potent siRNA delivery systems that protect siRNA from enzymatic degradation and enable its cytosolic delivery through pH-responsive, endosomolytic behavior. (1, 2) These architectures were polymerized using a living radical polymerization method, specifically reversible addition-fragmentation chain transfer (RAFT) polymerization, which employs a chain transfer agent (CTA) to modulate the rate of reaction, resulting in polymers with low polydispersity and telechelic chain ends reflecting the chemistry of the CTA. Here we describe the straightforward, facile synthesis of a folate receptor-targeted diblock copolymer siRNA delivery system because the folate receptor is an attractive target for tumor-selective therapies as a result of its overexpression in a number of cancers. Specifically, we detail the de novo synthesis of a folate-functionalized CTA, use the folate-CTA for controlled polymerizations of diblock copolymers, and demonstrate efficient, specific cellular folate receptor interaction and in vitro gene knockdown using the folate-functionalized polymer.     

Structural and rheological characterization of Scleroglucan/borax hydrogel for drug delivery

The polysaccharide Scleroglucan, one of the most rigid polymers found in nature, can form a chemical/physical gel, in the presence of borax. The obtained hydrogel was loaded with three different model molecules (Theophylline, Vitamin B12 and Myoglobin) and then, after freeze-drying, was used as a matrix for tablets. The release profiles of the substances from the dosage forms were evaluated; the matrix appeared capable to modulate the diffusion of the chosen molecules, and different diffusion rates were observed, according to the different radii of the tested molecules. Interestingly, in the dissolution medium the matrix undergoes an anisotropic swelling taking place only in the axial direction, while a negligible radial variation occurs. The water uptake of the matrix occurs according to a Fickian process.

Samples at two different polymer concentrations (0.7 and 2.3%, w/v) were characterized in terms of rheological and mechanical parameters and the properties were interpreted in terms of the molecular structure obtained by conformational analysis.

The flow curves acquired in the viscoelasticity interval, show the effect of the borate ion in improving the resistance of the gel in comparison to the polymer alone. The evaluation of the moduli indicates that the system is viscoelastic, with an appreciable liquid component that increases as the polymer concentration decreases. Also the cohesion of the gel is higher in comparison to the Scleroglucan and is strongly dependent on temperature.

The combination of experimental and theoretical conformational analysis approaches, allowed us to propose a model for the structure of the macromolecular network and to give an explanation to the anomalous swelling that was observed. It came out that the polymer can built up a channel structure, mediated via borax ion interaction, that can accommodate guest molecules of different size.     

Synthesis and in vitro characterization of oxytocin receptor targeted PEGylated immunoliposomes for drug delivery to the uterus

Abstract

Targeted delivery of therapeutics to the uterus is an important goal in the treatment of obstetric complications, such as preterm labour, postpartum hemorrhage, and dysfunctional labour. Current treatment for these obstetric complications is challenging, as there are limited effective and safe therapeutic options available. We have developed a targeted drug delivery system for the uterus by conjugating anti-oxytocin receptor (OTR) antibodies to the surface of PEGylated liposomes (OTR-PEG-ILs). The functionality of the OTR-PEG-ILs has previously been evaluated on human and murine myometrial tissues as well as in vivo in a murine model of preterm labour. The aim of this study was to report the pharmaceutical synthesis and characterization of the OTR-PEG-ILs and investigate their specific cellular interaction with OTR-expressing myometrial cells in vitro. Immunoliposomes composed of 1,2-distearoyl-sn-glycero-2-phosphocholine (DSPC) and cholesterol were prepared using an optimized method for the coupling of low concentrations of antibody to liposomes. The liposomes were characterized for particle size, antibody conjugation, drug encapsulation, liposome stability, specificity of binding, cellular internalization, mechanistic pathway of cellular uptake, and cellular toxicity. Cellular association studies demonstrated specific binding of OTR-PEG-ILs to OTRs and significant cellular uptake following binding. Evaluation of the mechanistic pathway of cellular uptake indicated that they undergo internalization through both clathrin- and caveolin-mediated mechanisms. Furthermore, cellular toxicity studies have shown no significant effect of OTR-PEG-ILs or the endocytotic inhibitors on cell viability. This study further supports oxytocin receptors as a novel pharmaceutical target for drug delivery to the uterus.     

Synthesis and characterization of N-aryl chitosan derivatives

Selective N-arylation of chitosan was performed via a Schiff bases formed by the reaction between the 2-amino group of glucosamine residue of chitosan with an aromatic aldehyde under acidic condition followed by reduction of the Schiff base intermediate with sodium cyanoborohydride (Borch reduction). Aromatic aldehydes bearing either an electron donating or electron withdrawing substituent were used. The chemical structures and thermal properties of the N-aryl chitosans were characterized by FT-IR, (1)H NMR, (13)C NMR, TGA, and DSC. The extent of N-substitution (ES) was influenced by the molar ratio of the aldehyde to the glucosamine residue of chitosan, the reaction time and the substituent on the aromatic ring. Lower ESs resulted from N-arylation using an aldehyde with an electron donating substituent. A linear relationship between the targeted ES and the ES obtained was observed when aldehydes bearing electron withdrawing substituents were employed.     

Preparation and characterization of nanoparticles shelled with chitosan for oral insulin delivery

Nanoparticles (NPs) composed of chitosan (CS) and poly(gamma-glutamic acid) (gamma-PGA) were prepared by a simple ionic-gelation method for oral insulin delivery. Fourier transform infrared (FT-IR) spectra indicated that CS and gamma-PGA were ionized at pH 2.5-6.6, while X-ray diffractograms demonstrated that the crystal structure of CS was disrupted after it was combined with gamma-PGA. The diameters of the prepared NPs were in the range of 110-150 nm with a negative or positive surface charge, depending on the relative concentrations of CS to gamma-PGA used. The NPs with a positive surface charge (or shelled with CS) could transiently open the tight junctions between Caco-2 cells and thus increased the paracellular permeability. After loading of insulin, the NPs remained spherical and the insulin release profiles were significantly affected by their stability in distinct pH environments. The in vivo results clearly indicated that the insulin-loaded NPs could effectively reduce the blood glucose level in a diabetic rat model.     

Biophysical characterization of a riboflavin-conjugated dendrimer platform for targeted drug delivery

The present study describes the biophysical characterization of generation-five poly(amidoamine) (PAMAM) dendrimers conjugated with riboflavin (RF) as a cancer-targeting platform. Two new series of dendrimers were designed, each presenting the riboflavin ligand attached at a different site (isoalloxazine at N-3 and d-ribose at N-10) and at varying ligand valency. Isothermal titration calorimetry (ITC) and differential scanning calorimetry (DSC) were used to determine the binding activity for riboflavin binding protein (RfBP) in a cell-free solution. The ITC data shows dendrimer conjugates have K(D) values of ≥ 465 nM on a riboflavin basis, an affinity ~93-fold lower than that of free riboflavin. The N-3 series showed greater binding affinity in comparison with the N-10 series. Notably, the affinity is inversely correlated with ligand valency. These findings are also corroborated by DSC, where greater protein-conjugate stability is achieved with the N-3 series and at lower ligand valency.