Theoretical and experimental study towards a nanogap dielectric biosensor

Theoretical and experimental studies of nanogap capacitors as potential label free biosensors are presented. The nanogap device is capable of detecting the existence of single stranded DNA (ssDNA) oligonucleotides (20-mer) in 100 nM aqueous solutions using a 20 nm gap of 1.2 pl in volume. While the dielectric properties of DNA solution have been widely investigated, early approaches are limited at low frequency by the parasitic noise due to the electrical double layer (EDL) impedance. Nanogap electrodes have the potential to serve as biomolecular junctions because their size (5-100 nm) minimizes electrode polarization effects regardless of frequency. In this paper, we modeled the effects of the EDL interaction between two parallel nanogap electrodes by solving the Poisson-Boltzmann (PB) equation for equilibrium state. When the gap size is smaller than the EDL thickness, the dependence of the nanogap capacitance on the ionic strength is insignificant. This is critical in using the capacitance change as an indicator of the existence of target molecules. The predicted capacitance of nanogaps filled with various ionic strength electrolytes was in quantitative agreement with the experimental measurements. The various concentrations of the target molecules in nanogap sensor were characterized. A capacitance change of a 20 nm x (10)1.5 microm x 4mm gap from 3.5 to 4.1 nF at 200 Hz was recorded between deionized water (DI) and 100 nM ssDNA solution (about 70,000 molecules inside the gap for equilibrium state).     

Nanogap Dielectric Spectroscopy for Aptamer-Based Protein Detection

Among the various label-free methods for monitoring biomolecular interactions, capacitive sensors stand out due to their simple instrumentation and compatibility with multiplex formats. However, electrode polarization due to ion gradient formation and noise from solution conductance limited early dielectric spectroscopic measurements to high frequencies only, which in turn limited their sensitivity to biomolecular interactions, as the applied excitation signals were too fast for the charged macromolecules to respond. To minimize electrode polarization effects, capacitive sensors with 20 nm electrode separation were fabricated using silicon dioxide sacrificial layer techniques. The nanoscale separation of the capacitive electrodes in the sensor results in an enhanced overlapping of electrical double layers, and apparently a more ordered “ice-like” water structure. Such effects in turn reduce low frequency contributions from bulk sample resistance and from electrode polarization, and thus markedly enhance sensitivity toward biomolecular interactions. Using these nanogap capacitive sensors, highly sensitive, label-free aptamer-based detection of protein molecules is achieved.     

Facile conversion of RNA aptamers to modular fluorescent sensors with tunable detection wavelengths

A GTP aptamer was converted to a modular fluorescent GTP sensor by conjugation of RRE (Rev responsive element) RNA and successive complex formation with a fluorophore-modified Rev peptide. Structural changes associated with substrate binding in the RNA aptamer were successfully transduced into changes in fluorescence intensity because of the modular structure of ribonucleopeptides. A simple modular strategy involving conjugation of a fluorophore-modified ribonucleopeptide to the stem region of an RNA aptamer deduced from secondary structural information helps produce fluorescent sensors, which allow tuning of excitation and detection wavelengths through the replacement of the fluorophore at the N-terminal of the Rev peptide.     

In vitro testing of a simply constructed, highly stable glucose sensor suitable for implantation in diabetic patients

We have constructed and tested in vitro a potentially implantable, needle-type amperometric enzyme electrode which is suitable for continuous monitoring of glucose concentrations in diabetic patients. The major requirements of stability during operation and ease of manufacture have been met with a sensor design which involves a simple dip-coating procedure for applying to a platinum base electrode an inner membrane of glucose oxidase immobilised in polyhydroxyethyl methacrylate (pHEMA), and an outer membrane composed of a pHEMA/polyurethane mixture. Sensors were operated at 700 mV for detection of hydrogen peroxide. Calibration curves for the sensor were linear to at least 20 mM glucose and were unaffected by a reduction in PO2 from 20 to 5 kPa. During continuous operation in 5 mM buffered glucose solutions in vitro, sensors suffered no significant loss of response over periods of up to 60 h. Such electrodes are, therefore, useful for development as in vivo glucose sensors.     

Stepwise Functionalization of Ribonucleopeptides: Optimization of the Response of Fluorescent Ribonucleopeptide Sensors for ATP

A stable complex of a peptide and RNA, ribonucleopeptide (RNP), provides a new framework to construct a macromolecular receptor for small molecules. The RNP receptor functionalized by a fluorophore-labeled Rev peptide exerts an optical signal associated with the ligand binding events. Replacing the Rev peptide of the ATP-binding RNP with a fluorophore-modified Rev peptide affords a fluorescent ATP sensor.     

Stepwise functionalization of ribonucleopeptides: optimization of the response of fluorescent ribonucleopeptide sensors for ATP

A stable complex of a peptide and RNA, ribonucleopeptide (RNP), provides a new framework to construct a macromolecular receptor for small molecules. The RNP receptor functionalized by a fluorophore-labeled Rev peptide exerts an optical signal associated with the ligand binding events. Replacing the Rev peptide of the ATP-binding RNP with a fluorophore-modified Rev peptide affords a fluorescent ATP sensor.     

Peptide biosensor for recognition of cross-species cell surface markers

Biosensors based on phage display-derived peptides as biorecognition molecules were used for the detection of cell surface cross-species markers in tissue homogenates. The peptide selected for murine myofibers was immobilized onto the surface of an acoustic wave sensor by biotin-streptavidin coupling. To detect peptide-receptor interaction, the sensors were exposed to muscle and control (kidney, liver, brain) tissue homogenates. The sensor showed a strong response to murine muscle. The amplitudes of the responses to the feline muscle homogenates were lower compared to those of the murine muscle, while the same K(d) indicated that the peptide has cross-species affinity. In contrast, murine kidney, liver and brain homogenates produced insignificant responses. Specificity of the sensor was shown in a blocking experiment, as reduced signal was detected when muscle preparations were preincubated with free peptide. Additionally, when muscle-specific peptide was replaced with two different random control peptides, the sensors produced no response to murine muscle. Suitability of peptide ligands for a variety of species can be evaluated using this technology.     

Sonochemically fabricated microelectrode arrays for biosensors offering widespread applicability: Part I

A novel and patented procedure is described for the sonochemical fabrication of a new class of microelectrode array based sensor with electrode element populations of up to 2 x 10(5) cm(-2). For some years it has been accepted that microelectrode arrays offer an attractive route for lowering minimum limits of detection and imparting stir (convectional mass transport) independence to sensor responses; despite this no commercial biosensors, to date, have employed microelectrode arrays, largely due to the cost of conventional fabrication routes that have not proved commercially viable for disposable devices. Biosensors formed by our sonochemical approach offer unrivalled sensitivity and impart stir independence to sensor responses. This format lends itself for mass fabrication due to the simplicity and inexpensiveness of the approach; in the first instance impedimetric and amperometric sensors are reported for glucose as model systems. Sensors already developed for ethanol, oxalate and a number of pesticide determinations will be reported in subsequent publications.     

A new amperometric glucose microsensor: in vitro and short-term in vivo evaluation

For biosensor fabrication, it is important to optimize materials and methods in order to create predictable function in vitro and in vivo. For this reason, we designed a new glucose sensor ('revised protocol') that utilized an outer permselective membrane made of amphiphobic polyurethane which allows glucose passage through hydrophilic segments. An inner polyethersulfone membrane, stabilized with a trimethoxysilane, provided specificity. Before application of the inner membrane, it was necessary to etch the platinum electrode with a radio frequency oxygen plasma. The revised protocol sensors (n=185) were compared with sensors fabricated with an earlier ('original') protocol (n=204) which used an outer polyurethane without hydrophilic segments and a complex inner membrane of cellulose acetate and Nafion. The function of revised protocol sensors was more predictable in vitro as evidenced by a much lower variation of glucose sensitivity than the original protocol sensors. Revised and original protocol sensors were nearly linear up to a glucose concentration of 20 mM. In vitro interference from 0.1 mM acetaminophen was minimal in both groups of sensors and would be expected to represent about 2% of the total sensor response at normal glucose levels for revised protocol sensors. Prolonged testing of the revised protocol sensors for 11 days during immersion in buffer revealed stable sensitivities (day 1: 6.12+/-1.34 nA/mM; day 3: 6.33+/-1.40; day 8: 7.13+/-1.39; and day 11: 7.56+/-1.47; sensitivity for day 1 vs. each other day: not significant) and no critical loss of glucose oxidase activity. The response of the revised protocol sensors (n=7) to intraperitoneal glucose was tested in rats approximately one day after subcutaneous implantation and the sensors tracked glucose closely with a slight lag of 3-6 min.     

Odorant binding protein based biomimetic sensors for detection of alcohols associated with Salmonella contamination in packaged beef

Detection of food-borne bacteria present in the food products is critical to prevent the spread of infectious diseases. Intelligent quality sensors are being developed for detecting bacterial pathogens such as Salmonella in beef. One of our research thrusts was to develop novel sensing materials sensitive to specific indicator alcohols at low concentrations. Present work focuses on developing olfactory sensors mimicking insect odorant binding protein to detect alcohols in low concentrations at room temperature. A quartz crystal microbalance (QCM) based sensor in conjunction with synthetic peptide was developed to detect volatile organic compounds indicative to Salmonella contamination in packaged beef. The peptide sequence used as sensing materials was derived from the amino acids sequence of Drosophila odorant binding protein, LUSH. The sensors were used to detect alcohols: 3-methyl-1-butanol and 1-hexanol. The sensors were sensitive to alcohols with estimated lower detection limits of <5 ppm. Thus, the LUSH-derived QCM sensors exhibited potential to detect alcohols at low ppm concentrations.     

Water, Shape Recognition, Salt Bridges, and Cation-Pi Interactions Differentiate Peptide Recognition of the HIV Rev-Responsive Element

Recognition of the human immunodeficiency virus Rev-responsive element (RRE) RNA by the Rev protein is an essential step in the viral life cycle. Formation of the Rev-RRE complex signals nucleocytoplasmic export of unspliced and partially spliced viral RNA. Essential components of the complex have been localized to a minimal arginine-rich Rev peptide and stem IIB of RRE. In vitro selection studies have identified a synthetic peptide known as RSG 1.2 that binds with better specificity and affinity to RRE than the Rev peptide. NMR structures of both peptide-RNA complexes of Rev and RSG 1.2 bound to RRE stem IIB have been solved and reveal gross structural differences between the two bound complexes. Molecular dynamics simulations of the Rev and RSG 1.2 peptides in complex with RRE stem IIB have been simulated to better understand on an atomic level how two arginine-rich peptides of similar length recognize the same sequence of RNA with such different structural motifs. While the Rev peptide employs some base-specific hydrogen bonding for recognition of RRE, shape recognition, through contact with the sugar-phosphate backbone, and cation-pi interactions are also important. Molecular dynamics simulations suggest that RSG 1.2 binds more tightly to the RRE sequence than Rev by forming more base-specific contacts, using water to mediate peptide-RNA contacts, and is held in place by a strong salt bridge network spanning the major groove of the RNA.     

Screen-printed enzyme sensors for l-lysine determination

Sensors for the determination of L-lysine in samples of fermentation broth have been developed. Low-cost screen-printed sensors comprising a platinum working electrode, an Ag/AgCl pseudo reference and a carbon counter electrode were used as transducers for the enzyme sensors. L-lysine-(alpha)-oxidase from Trichoderma viride has been immobilized by entrapment into a polyurethane hydrogel. Sensors were characterized for L-lysine with respect to pH value, linear range, reproducibility, repeatability, storage and working stability. The sensitivities to other amino acids were also determined. A batch system with two working electrodes, one with immobilized enzyme and one without was adapted for the determination of L-lysine by differential measurements. Good agreement was found between L-lysine concentrations measured by the enzyme sensors and by a conventional amino acid analyzer.     

Design and application of highly responsive fluorescence resonance energy transfer biosensors for detection of sugar in living Saccharomyces cerevisiae cells

A protein sensor with a highly responsive fluorescence resonance energy transfer (FRET) signal for sensing sugars in living Saccharomyces cerevisiae cells was developed by combinatorial engineering of the domain linker and the binding protein moiety. Although FRET sensors based on microbial binding proteins have previously been created for visualizing various sugars in vivo, such sensors are limited due to a weak signal intensity and a narrow dynamic range. In the present study, the length and composition of the linker moiety of a FRET-based sensor consisting of CFP-linker(1)-maltose-binding protein-linker(2)-YFP were redesigned, which resulted in a 10-fold-higher signal intensity. Molecular modeling of the composite linker moieties, including the connecting peptide and terminal regions of the flanking proteins, suggested that an ordered helical structure was preferable for tighter coupling of the conformational change of the binding proteins to the FRET response. When the binding site residue Trp62 of the maltose-binding protein was diversified by saturation mutagenesis, the Leu mutant exhibited an increased binding constant (82 microM) accompanied by further improvement in the signal intensity. Finally, the maltose sensor with optimized linkers was redesigned to create a sugar sensor with a new specificity and a wide dynamic range. When the optimized maltose sensors were employed as in vivo sensors, highly responsive FRET images were generated from real-time analysis of maltose uptake of Saccharomyces cerevisiae (baker's yeast).     

A Point-of-Care Immunosensor for Human Chorionic Gonadotropin in Clinical Urine Samples Using a Cuneated Polysilicon Nanogap Lab-on-Chip

Human chorionic gonadotropin (hCG), a glycoprotein hormone secreted from the placenta, is a key molecule that indicates pregnancy. Here, we have designed a cost-effective, label-free, in situ point-of-care (POC) immunosensor to estimate hCG using a cuneated 25 nm polysilicon nanogap electrode. A tiny chip with the dimensions of 20.5 × 12.5 mm was fabricated using conventional lithography and size expansion techniques. Furthermore, the sensing surface was functionalized by (3-aminopropyl)triethoxysilane and quantitatively measured the variations in hCG levels from clinically obtained human urine samples. The dielectric properties of the present sensor are shown with a capacitance above 40 nF for samples from pregnant women; it was lower with samples from non-pregnant women. Furthermore, it has been proven that our sensor has a wide linear range of detection, as a sensitivity of 835.88 μA mIU^-1 ml^-2 cm^-2 was attained, and the detection limit was 0.28 mIU/ml (27.78 pg/ml). The dissociation constant K_d of the specific antigen binding to the anti-hCG was calculated as 2.23 ± 0.66 mIU, and the maximum number of binding sites per antigen was B_max = 22.54 ± 1.46 mIU. The sensing system shown here, with a narrow nanogap, is suitable for high-throughput POC diagnosis, and a single injection can obtain triplicate data or parallel analyses of different targets.     

Electrochemical analysis of copper ion using a Gly–Gly–His tripeptide modified poly(3-thiopheneacetic acid) biosensor

A novel biosensor harnessing a conducting polymer functionalized with a copper ion specific peptide proved to be highly effective for electrochemical analysis of copper ions. The developed sensor comprised a transducer based on a conducting polymer (poly(3-thiopheneacetic acid)) electrode and a probe (tripeptide, Gly–Gly–His) selectively cognitive of copper ions. For functionalization of the electrode, the carboxylic group of the polymer was covalently coupled with the amine group of the tripeptide, and its structural features were confirmed by X-ray photoelectron spectroscopy (XPS) and attenuated total reflection infrared (ATR-IR) spectroscopy. The peptide modified polythiophene biosensor was used for the electrochemical analysis of various trace metal ions by square wave voltammetry. The electrode was found to be highly sensitive and selective to Cu²⁺ in the range of 0.02–20 μM with almost no cross binding to other metal ions such as Ni²⁺ and Pb²⁺. Furthermore, the developed sensor exhibited a high stability and reproducibility despite the repeated use of the sensor electrode and probe. With the advent of more diverse affinity bioprobes specific towards a broad range of analytes, the demonstrated strategy harnessing peptide modified polythiophene biosensor is likely to provide an excellent platform for the selective determination of trace amount of analytes whose detection is otherwise cumbersome.     

Proflavine acts as a Rev inhibitor by targeting the high-affinity Rev binding site of the Rev responsive element of HIV-1

Rev is an essential regulatory HIV-1 protein that binds the Rev responsive element (RRE) within the env gene of the HIV-1 RNA genome, activating the switch between viral latency and active viral replication. Previously, we have shown that selective incorporation of the fluorescent probe 2-aminopurine (2-AP) into a truncated form of the RRE sequence (RRE-IIB) allowed the binding of an arginine-rich peptide derived from Rev and aminoglycosides to be characterized directly by fluorescence methods. Using these fluorescence and nuclear magnetic resonance (NMR) methods, proflavine has been identified, through a limited screen of selected small heterocyclic compounds, as a specific and high-affinity RRE-IIB binder which inhibits the interaction of the Rev peptide with RRE-IIB. Direct and competitive 2-AP fluorescence binding assays reveal that there are at least two classes of proflavine binding sites on RRE-IIB: a high-affinity site that competes with the Rev peptide for binding to RRE-IIB (K(D) approximately 0.1 +/- 0.05 microM) and a weaker binding site(s) (K(D) approximately 1.1 +/- 0.05 microM). Titrations of RRE-IIB with proflavine, monitored using (1)H NMR, demonstrate that the high-affinity proflavine binding interaction occurs with a 2:1 (proflavine:RRE-IIB) stoichiometry, and NOEs observed in the NOESY spectrum of the 2:1 proflavine.RRE-IIB complex indicate that the two proflavine molecules bind specifically and close to each other within a single binding site. NOESY data further indicate that formation of the 2:1 proflavine.RRE-IIB complex stabilizes base pairing and stacking within the internal purine-rich bulge of RRE-IIB in a manner analogous to what has been observed in the Rev peptide.RRE-IIB complex. The observation that proflavine competes with Rev for binding to RRE-IIB by binding as a dimer to a single high-affinity site opens the possibility for rational drug design based on linking and modifying it and related compounds.     

Voltammetric sensor for vanillylmandelic acid based on molecularly imprinted polymer-modified electrodes

Despite the increasing number of applications of molecularly imprinted polymers (MIPs) in analytical chemistry, the construction of a biomimetic voltammetric sensor remains still challenging. This work investigates the development of a voltammetric sensor for vanillylmandelic acid (VMA) based on acrylic MIP-modified electrodes. Thin layers of MIPs for VMA have been prepared by spin coating the surface of a glassy carbon electrode with the monomers mixture (template, methacrylic acid, a cross-linking agent and solvent), followed by in situ photopolymerisation. After extraction of the template molecule, the peak current recorded with the imprinted sensor after rebinding was linear with VMA concentration in the range 19-350 microg ml(-1), whereas the response of the control electrode is independent of incubation concentration, and was about one-tenth of the value recorded with the imprinted sensor at the maximum concentration tested. Under the conditions used, the sensor is able to differentiate between VMA and other closely structural-related compounds, such as 3-methoxy-4-hydroxyphenylethylene glycol (not detected), or 3,4- and 2,5-dihydroxyphenilacetic acids, which are adsorbed on the bare electrode surface but not at the polymer layer. Homovanillic acid was detected with the imprinted sensors after incubation, indicating that the presence of both methoxy and carboxylic groups in the same position as in VMA is necessary for effective binding in the imprinted sites. Nevertheless, both species can be differentiated by the oxidation potential. It can be concluded that MIP-based voltammetric electrodes are very promising analytical tool for the development of highly selective analytical sensors.     

Increased pathogen resistance and yield in transgenic plants expressing combinations of the modified antimicrobial peptides based on indolicidin and magainin

Reverse peptide of indolicidin (Rev4), a 13-residue peptide based on the sequence of indolicidin, has been shown to possess both strong antimicrobial and protease inhibitory activities in vitro. To evaluate its efficacy in vivo, we produced and evaluated transgenic tobacco (Nicotiana tabacum L.) and Arabidopsis thaliana [(L.) Heynh.] plants expressing Rev4 with different signal peptide sequences for pathogen resistance. All transgenic plants showed normal growth and development, an indication of no or low cytotoxicity of the peptide. Furthermore, the transgenic plants exhibited elevated resistance to three bacterial and two oomycete pathogens. Interestingly, tobacco plants expressing Rev4 displayed enhanced yield compared to the control as indicated by an increased biomass production by as much as 34% in two field trials. When Rev4 was coexpressed with another antimicrobial peptide, Myp30, the disease resistance levels in the transgenic Arabidopsis were enhanced. These findings suggest the potential of using these peptides to protect plants from microbial pathogens and to enhance yield.     

Construction of dopamine sensors by using fluorescent ribonucleopeptide complexes

A facile strategy of stepwise molding of a ribonucleopeptide (RNP) complex affords fluorescent RNP sensors with selective dopamine recognition. In vitro selection of a RNA-derived RNP library, a complex of the Rev peptide and its binding site Rev Responsive Element (RRE) RNA appended with random nucleotides in variable lengths, afforded RNP receptors specific for dopamine. The modular structure of the RNP receptor enables conversion of dopamine-binding RNP receptors to fluorescent dopamine sensors. Application of conditional selection schemes, such as the variation of salt concentrations and application of a counter-selection step by using a competitor ligand norepinephrine resulted in isolation of RNP receptors with defined dopamine-binding characteristics. Increasing the salt condition at the in vitro selection stage afforded RNP receptors with higher dopamine affinity, while addition of norepinephrine in the in vitro selection milieu at the counter-selection step reinforced the selectivity of RNP receptors to dopamine against norepinephrine. Thermodynamic analyses and circular dichroismic studies of the dopamine-RNP complexes suggest that the dopamine-binding RNP with higher selectivity against norepinephrine forms a pre-organized binding pocket and that the dopamine-binding RNP with higher affinity binds dopamine through the induced-fit mechanism. These results indicate that the selection condition controls the ligand-binding mechanism of RNP receptors.     

Peptide-triggered conformational switch in HIV-1 RRE RNA complexes

We have used NMR spectroscopy to determine the solution structure of a complex between an oligonucleotide derived from stem IIB of the Rev responsive element (RRE-IIB) of HIV-1 mRNA and an in vivo selected, high affinity binding Arg-rich peptide. The peptide binds in a partially alpha-helical conformation into a pocket within the RNA deep groove. Comparison with the structure of a complex between an alpha-helical Rev peptide and RRE-IIB reveals that the sequence of the bound peptide determines the local conformation of the RRE peptide binding site. A conformational switch of an unpaired uridine base was revealed; this points out into the solvent in the Rev peptide complex, but it is stabilized inside the RNA deep groove by stacking with an Arg side chain in the selected peptide complex. The conformational switch has been visualized by NMR chemical shift mapping of the uridine H5/H6 atoms during a competition experiment in which Rev peptide was displaced from RRE-IIB by the higher affinity binding selected peptide.