Enzyme promiscuity: mechanism and applications

Introductory courses in biochemistry teach that enzymes are specific for their substrates and the reactions they catalyze. Enzymes diverging from this statement are sometimes called promiscuous. It has been suggested that relaxed substrate and reaction specificities can have an important role in enzyme evolution; however, enzyme promiscuity also has an applied aspect. Enzyme condition promiscuity has, for a long time, been used to run reactions under conditions of low water activity that favor ester synthesis instead of hydrolysis. Together with enzyme substrate promiscuity, it is exploited in numerous synthetic applications, from the laboratory to industrial scale. Furthermore, enzyme catalytic promiscuity, where enzymes catalyze accidental or induced new reactions, has begun to be recognized as a valuable research and synthesis tool. Exploiting enzyme catalytic promiscuity might lead to improvements in existing catalysts and provide novel synthesis pathways that are currently not available.     

Membrane chromatography: preparation and applications to protein separation

As a result of the convective flow of solutes through porous membranes, membrane chromatography has a higher capture efficiency and a higher productivity than column chromatography and shows most promising industrial applications for the recovery, isolation, and purification of proteins and enzymes. This paper presents a comprehensive review of the methods for preparation of adsorptive membranes (such as surface modification, in situ copolymerization, direct formation from hydrophilic materials, and functionalized particulate-entrapped membranes) and deals particularly with novel macroporous chitin and chitosan membranes for protein separations developed by the authors.     

A continuous multicolumn countercurrent solvent gradient purification (MCSGP) process

Biomolecules are often purified via solvent gradient batch chromatography. Typically suitable smooth linear solvent gradients are applied to obtain the separation between the desired component and hundreds of impurities. The desired product is usually intermediate between weakly and strongly adsorbing impurities, and therefore a central cut is required to get the desired pure product. The stationary phases used for preparative and industrial separations have a low efficiency due to strong axial dispersion and strong mass transfer resistances. Therefore a satisfactory purification often cannot be achieved in a single chromatographic step. For large scale productions and for very valuable molecules, countercurrent operation such as the well known SMB process, is needed in order to increase separation efficiency, yield and productivity. In this work a novel multicolumn solvent gradient purification process (MCSGP-process) is introduced, which combines two chromatographic separation techniques, which are solvent gradient batch and continuous countercurrent SMB. The process consists of several chromatographic columns, which are switched in position opposite to the flow direction. Most of the columns are equipped with a gradient pump to adjust the modifier concentration at the column inlet. Some columns are interconnected, so that non pure product streams are internally, countercurrently recycled. Other columns are short circuited and operate in batch mode. As a working example the purification of an industrial stream containing 46% of the hormone Calcitonin is considered. It is found that for the required purity the MCSGP unit achieves a yield close to 100% compared to a maximum value of a single column batch chromatography of 66%.     

Immobilized Biocatalysts for the Production of Nucleosides and Nucleoside Analogues by Enzymatic Transglycosylation Reactions

The recombinant enzymes uridine phosphorylase (UP) and purine nucleoside phosphorylase (PNP) were over-expressed in high-biomass bacterial fermentations and co-immobilized, without previous purification, on epoxy-activated solid supports by covalent linkages. These preparations are efficient biocatalysts of transglycosylation reactions and have been developed for producting natural and modified nucleosides of pharmaceutical interest in the field of antiviral and antitumoral agents. The new biocatalysts described in this work are suitable for both laboratory and industrial scale applications due to the maintainance of high catalytic efficiency, thermal and solvent stability, reusability and ease of operation in batch as well as in continuous reactions.     

Design of new reaction conditions for characterization of a mutant thermophilic α-l-fucosidase

Glycosynthases are mutant glycosidases, which in the presence of activated glycosides and suitable reaction conditions, synthesize oligosaccharides without hydrolysing them. This feature makes these catalysts promising tools for the large scale synthesis of carbohydrates. However, despite the popularity of the glycosynthetic approach, the number of enzymes effecting glycosynthetic reactions is still limited. We report here on the design of novel reaction conditions for a thermophilic α-l-fucosidase mutant, which might provide a route for the production of novel glycosynthases.     

Tools for Selective Enzyme Reaction Steps in the Synthesis of Laboratory Chemicals

The need for more selective reactions steps and the compatibility between process steps which follow on from each other has been a major driving force for organic synthesis. The synthesis of chiral compounds, metabolites, new chemical entities and natural products by a combination of chemical and enzyme reaction steps has become well established, due the existence of stable enzymes as selective catalysts which are inherently chiral by nature. Auxiliary tools such as suitable transfer reagents for reaching complete conversion, easy and robust reaction control as well as tools for straightforward workup and purification of the final product have been developed. Selective enzyme reaction steps in the area of hydrolyses, oxidation steps including hydroxylation and the Baeyer‐Villiger oxidation, carbon‐carbon bond formation and glycosylation reactions have compared favorably with existing methods of classical organic synthesis. The tools developed during optimization and scale‐up of these enzyme reaction steps have the potential to shorten development time. The introduction of selective enzyme reactions into an entire synthetic process has resulted in harmonization of improvements in economic efficiency with resultant solutions to health, safety and environment problems. This will become even more important in industrial synthetic chemistry in the future, for convenient solutions to certain intractable synthetic problems and for expanding the repertoire of chemistry by modular biocatalysts. Efficient isolation procedures for the final product are essential to take full advantage of the biocatalytic conversion to obtain high product yields.     

Developing microbial biofilm as a robust biocatalyst and its challenges

Biocatalysts, such as bacteria, yeast, fungi and the enzymes they produce, have been used for many industrial applications since they function as effective and environmentally friendly tools. Whole cells have also been used in many sophisticated bioprocesses since a number of sequential reactions can be catalyzed within the cells. However, the use of whole cells in suspension in batch, fed-batch and continuous processes has some limitations. For instance, the cultures are non-reusable, they are sometimes sensitive to the toxicity of substrates or products, there can be issues with short-term stability, and each of these issues can impede biocatalyst regeneration, perturbing the downstream process and causing complexity in running large scale continuous culture. Recently, biofilms have emerged as a new generation of biocatalysts to solve these limitations in the production of many bio-based materials, including chemicals, antibiotics, enzymes, bioethanol, biohydrogen, and electricity production via microbial fuel cells. The establishment of industrial processes using biofilms has the potential for high benefit in terms of low-cost cell immobilization without the necessity of added polymers or chemicals. Many small-scale biofilm reactors have been developed for the production of value-added products, and it may be challenging to establish it on an industrial scale.     

Carbohydrate-binding domains facilitate efficient oligosaccharides synthesis by enhancing mutant catalytic domain transglycosylation activity

Chemoenzymatic approaches using carbohydrate-active enzymes (CAZymes) offer a promising avenue for the synthesis of glycans like oligosaccharides. Here, we report a novel chemoenzymatic route for cellodextrins synthesis employed by chimeric CAZymes, akin to native glycosyltransferases, involving the unprecedented participation of a “non-catalytic” lectin-like domain or carbohydrate-binding modules (CBMs) in the catalytic step for glycosidic bond synthesis using β-cellobiosyl donor sugars as activated substrates. CBMs are often thought to play a passive substrate targeting role in enzymatic glycosylation reactions mostly via overcoming substrate diffusion limitations for tethered catalytic domains (CDs) but are not known to participate directly in any nucleophilic substitution mechanisms that impact the actual glycosyl transfer step. This study provides evidence for the direct participation of CBMs in the catalytic reaction step for β-glucan glycosidic bonds synthesis enhancing activity for CBM-based CAZyme chimeras by >140-fold over CDs alone. Dynamic intradomain interactions that facilitate this poorly understood reaction mechanism were further revealed by small-angle X-ray scattering structural analysis along with detailed mutagenesis studies to shed light on our current limited understanding of similar transglycosylation-type reaction mechanisms. In summary, our study provides a novel strategy for engineering similar CBM-based CAZyme chimeras for the synthesis of bespoke oligosaccharides using simple activated sugar monomers.     

Expanding the Halohydrin Dehalogenase Enzyme Family: Identification of Novel Enzymes by Database Mining

Halohydrin dehalogenases are very rare enzymes that are naturally involved in the mineralization of halogenated xenobiotics. Due to their catalytic potential and promiscuity, many biocatalytic reactions have been described that have led to several interesting and industrially important applications. Nevertheless, only a few of these enzymes have been made available through recombinant techniques; hence, it is of general interest to expand the repertoire of these enzymes so as to enable novel biocatalytic applications. After the identification of specific sequence motifs, 37 novel enzyme sequences were readily identified in public sequence databases. All enzymes that could be heterologously expressed also catalyzed typical halohydrin dehalogenase reactions. Phylogenetic inference for enzymes of the halohydrin dehalogenase enzyme family confirmed that all enzymes form a distinct monophyletic clade within the short-chain dehydrogenase/reductase superfamily. In addition, the majority of novel enzymes are substantially different from previously known phylogenetic subtypes. Consequently, four additional phylogenetic subtypes were defined, greatly expanding the halohydrin dehalogenase enzyme family. We show that the enormous wealth of environmental and genome sequences present in public databases can be tapped for in silico identification of very rare but biotechnologically important biocatalysts. Our findings help to readily identify halohydrin dehalogenases in ever-growing sequence databases and, as a consequence, make even more members of this interesting enzyme family available to the scientific and industrial community.     

Radical mechanisms in adenosylmethionine- and adenosylcobalamin-dependent enzymatic reactions

A class of enzymatic reactions of S-adenosylmethionine (AdoMet) has recently been recognized, in which AdoMet plays a novel role by initiating free radical formation through the intermediate formation of 5'-deoxyadenosine-5'-yl, the 5'-deoxyadenosyl radical. The reactions are in this way related to adenosylcobalamin-dependent processes, which also depend on the formation of the 5'-deoxyadenosyl radical as an intermediate. The mechanisms by which the 5'-deoxyadenosyl radical is generated by the AdoMet- and adenosylcobalamin-dependent enzymes are very different. However, the functions of the 5'-deoxyadenosyl radical are similar in that in all cases it abstracts hydrogen from a substrate to form 5'-deoxyadenosine and a substrate-derived free radical. In this paper, the role of the 5'-deoxyadenosyl radical in the reaction of the adenosylcobalamin-dependent reactions will be compared with its role in the AdoMet-dependent reaction of lysine 2,3-aminomutase. The mechanism by which AdoMet is cleaved to the 5'-deoxyadenosyl radical at enzymatic sites will also be discussed.     

Production of fine chemicals using biocatalysis

Presently, a large number of biotransformations are carried out on an industrial scale and are discussed in a fast increasing number of reviews. Besides this, a significant number of biotransformations have been investigated over the past year, from degrading to transforming and synthetic reactions. The development of more specific and stable biocatalysts, either isolated enzymes or whole cells, generated by the new methods of genetic engineering and improved by reaction engineering have led to new industrial biotransformations.     

Microbial P450 enzymes in biotechnology

Oxidations are key reactions in chemical syntheses. Biooxidations using fermentation processes have already conquered some niches in industrial oxidation processes since they allow the introduction of oxygen into non-activated carbon atoms in a sterically and optically selective manner that is difficult or impossible to achieve by synthetic organic chemistry. Biooxidation using isolated enzymes is limited to oxidases and dehydrogenases. Surprisingly, cytochrome P450 monooxygenases have scarcely been studied for use in biooxidations, although they are one of the largest known superfamilies of enzyme proteins. Their gene sequences have been identified in various organisms such as humans, bacteria, algae, fungi, and plants. The reactions catalyzed by P450s are quite diverse and range from biosynthetic pathways (e.g. those of animal hormones and secondary plant metabolites) to the activation or biodegradation of hydrophobic xenobiotic compounds (e.g. those of various drugs in the liver of higher animals). From a practical point of view, the great potential of P450s is limited by their functional complexity, low activity, and limited stability. In addition, P450-catalyzed reactions require a constant supply of NAD(P)H which makes continuous cell-free processes very expensive. Quite recently, several groups have started to investigate cost-efficient ways that could allow the continuous supply of electrons to the heme iron. These include, for example, the use of electron mediators, direct electron supply from electrodes, and enzymatic approaches. In addition, methods of protein design and directed evolution have been applied in an attempt to enhance the activity of the enzymes and improve their selectivity. The promising application of bacterial P450s as catalyzing agents in biocatalytic reactions and recent progress made in this field are both covered in this review.     

Current state and perspectives of penicillin G acylase-based biocatalyses

In the course of more than 60-year history, penicillin G acylase (PGA) gained a unique position among enzymes used by pharmaceutical industry for production of β-lactam antibiotics. Kinetically controlled enzymatic syntheses of cephalosporins of novel generations in which PGA catalyzes coupling of activated acyl donor with nucleophile belong among the latest large-scale applications. Contrary to rather specific roles of other enzymes involved in β-lactam biocatalyses, the PGA seems to have the greatest potential. On the laboratory scale, other applications with industrial potential were described, e.g., directed evolution of the enzyme to meet specific demands of industrial processes or its modification into the enzyme catalyzing reactions with novel substrates. The fact that β-lactams represent the most important group of antibiotics comprising 65 % of the world antibiotic market explains such a tremendous and continuous interest in this enzyme. Indeed, the annual consumption of PGA has recently been estimated to range from 10 to 30 million tons. The application potential of the enzyme goes beyond the β-lactam biocatalysis due to its enantioselectivity and promiscuity: the PGA can be used for the production of achiral and chiral compounds convenient for the preparation of synthons and active pharmaceutical ingrediences, respectively. These biocatalyses, however, still wait for large-scale application.     

Rapid media transition: An experimental approach for steady state analysis of metabolic pathways

Commonly steady state analysis of microbial metabolism is performed under well defined physiological conditions in continuous cultures with fixed external rates. However, most industrial bioprocesses are operated in fed‐batch mode under non‐stationary conditions, which cannot be realized in chemostat cultures. A novel experimental setup—rapid media transition—enables steady state perturbation of metabolism on a time scale of several minutes in parallel to operating bioprocesses. For this purpose, cells are separated from the production process and transferred into a lab‐scale stirred‐tank reactor with modified environmental conditions. This new approach was evaluated experimentally in four rapid media transition experiments with Escherichia coli from a fed‐batch process. We tested the reaction to different carbon sources entering at various points of central metabolism. In all cases, the applied substrates (glucose, succinate, acetate, and pyruvate) were immediately utilized by the cells. Extracellular rates and metabolome data indicate a metabolic steady state during the short‐term cultivation. Stoichiometric analysis revealed distribution of intracellular fluxes, which differs drastically subject to the applied carbon source. For some reactions, the variation of flux could be correlated to changes of metabolite concentrations. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Halogenation and Oxidation Reactions with Haloperoxidases

Haloperoxidases are enzymes which catalyze the incorporation of halogen atoms into organic molecules. They are found throughout nature, playing a major role in the defence system of many organisms. Their reaction mechanisms as well as their use as catalysts for halogenation and oxidation reactions on laboratory and industrial scales are discussed. Up to now, selective halogenation reactions have only been reported for the chloroperoxidase from Pseudomonas pyrrocinia. The usefulness of the other enzymes is based on their ability to produce hypohalous acid (HOX) in a controllable way, allowing the smooth (yet nonselective) halogenation of electron-rich substrates. On the other hand, it has been shown recently that some haloperoxidases can stereoselectively convert sulfides and alkenes into their corresponding homochiral oxides. Therefore, these enzymes will undoubtedly gain importance in the near future.     

Using enzyme cascades in biocatalysis: Highlight on transaminases and carboxylic acid reductases

Biocatalysis, the use of enzymes in chemical transformations, is an important green chemistry tool. Cascade reactions combine different enzyme activities in a sequential set of reactions. Cascades can occur within a living (usually bacterial) cell; in vitro in ‘one pot’ systems where the desired enzymes are mixed together to carry out the multi-enzyme reaction; or using microfluidic systems. Microfluidics offers particular advantages when the product of the reaction inhibits the enzyme(s). In vitro systems allow variation of different enzyme concentrations to optimise the metabolic ‘flux’, and the addition of enzyme cofactors as required. Cascades including cofactor recycling systems and modelling approaches are being developed to optimise cascades for wider industrial scale use. Two industrially important enzymes, transaminases and carboxylic acid reductases are used as examples regarding their applications in cascade reactions with other enzyme classes to obtain important synthons of pharmaceutical interest.     

Curating a comprehensive set of enzymatic reaction rules for efficient novel biosynthetic pathway design

Enzyme substrate promiscuity has significant implications for metabolic engineering. The ability to predict the space of possible enzymatic side reactions is crucial for elucidating underground metabolic networks in microorganisms, as well as harnessing novel biosynthetic capabilities of enzymes to produce desired chemicals. Reaction rule-based cheminformatics platforms have been implemented to computationally enumerate possible promiscuous reactions, relying on existing knowledge of enzymatic transformations to inform novel reactions. However, past versions of curated reaction rules have been limited by a lack of comprehensiveness in representing all possible transformations, as well as the need to prune rules to enhance computational efficiency in pathway expansion. To this end, we curated a set of 1224 most generalized reaction rules, automatically abstracted from atom-mapped MetaCyc reactions and verified to uniquely cover all common enzymatic transformations. We developed a framework to systematically identify and correct redundancies and errors in the curation process, resulting in a minimal, yet comprehensive, rule set. These reaction rules were capable of reproducing more than 85% of all reactions in the KEGG and BRENDA databases, for which a large fraction of reactions is not present in MetaCyc. Our rules exceed all previously published rule sets for which reproduction was possible in this coverage analysis, which allows for the exploration of a larger space of known enzymatic transformations. By leveraging the entire knowledge of possible metabolic reactions through generalized enzymatic reaction rules, we are able to better utilize underground metabolic pathways and accelerate novel biosynthetic pathway design to enable bioproduction towards a wider range of new molecules.     

Halogenation and Oxidation Reactions with Haloperoxidases

Haloperoxidases are enzymes which catalyze the incorporation of halogen atoms into organic molecules. They are found throughout nature, playing a major role in the defence system of many organisms. Their reaction mechanisms as well as their use as catalysts for halogenation and oxidation reactions on laboratory and industrial scales are discussed. Up to now, selective halogenation reactions have only been reported for the chloroperoxidase from Pseudomonas pyrrocinia. The usefulness of the other enzymes is based on their ability to produce hypohalous acid (HOX) in a controllable way, allowing the smooth (yet nonselective) halogenation of electron-rich substrates. On the other hand, it has been shown recently that some haloperoxidases can stereoselectively convert sulfides and alkenes into their corresponding homochiral oxides. Therefore, these enzymes will undoubtedly gain importance in the near future.     

Modeling of uncertainties in biochemical reactions

Mathematical modeling is an indispensable tool for research and development in biotechnology and bioengineering. The formulation of kinetic models of biochemical networks depends on knowledge of the kinetic properties of the enzymes of the individual reactions. However, kinetic data acquired from experimental observations bring along uncertainties due to various experimental conditions and measurement methods. In this contribution, we propose a novel way to model the uncertainty in the enzyme kinetics and to predict quantitatively the responses of metabolic reactions to the changes in enzyme activities under uncertainty. The proposed methodology accounts explicitly for mechanistic properties of enzymes and physico‐chemical and thermodynamic constraints, and is based on formalism from systems theory and metabolic control analysis. We achieve this by observing that kinetic responses of metabolic reactions depend: (i) on the distribution of the enzymes among their free form and all reactive states; (ii) on the equilibrium displacements of the overall reaction and that of the individual enzymatic steps; and (iii) on the net fluxes through the enzyme. Relying on this observation, we develop a novel, efficient Monte Carlo sampling procedure to generate all states within a metabolic reaction that satisfy imposed constrains. Thus, we derive the statistics of the expected responses of the metabolic reactions to changes in enzyme levels and activities, in the levels of metabolites, and in the values of the kinetic parameters. We present aspects of the proposed framework through an example of the fundamental three‐step reversible enzymatic reaction mechanism. We demonstrate that the equilibrium displacements of the individual enzymatic steps have an important influence on kinetic responses of the enzyme. Furthermore, we derive the conditions that must be satisfied by a reversible three‐step enzymatic reaction operating far away from the equilibrium in order to respond to changes in metabolite levels according to the irreversible Michelis–Menten kinetics. The efficient sampling procedure allows easy, scalable, implementation of this methodology to modeling of large‐scale biochemical networks. Biotechnol. Bioeng. 2011;108: 413–423. © 2010 Wiley Periodicals, Inc.