共查询到20条相似文献,搜索用时 15 毫秒
1.
S Fink 《Stain technology》1987,62(1):27-33
As a new aqueous adhesive to affix sections to glass slides, hydrolyzed vinyltriethoxysilane--either pure, in combination with polyvinyl alcohol or with specially prepared aqueous polyacrylate solutions--was applied. The silane proved to be very effective in enhancing bonding to the glass surface. As a general aqueous adhesive, a solution of 2% polyvinyl alcohol (m.w. 108,000; 99.7% hydrolyzed) with 0.2% hydrolyzed vinyltriethoxysilane is recommended. This stock solution is diluted 1:10 to 1:50 and used directly to float sections onto slides on a warming plate. 相似文献
2.
S Fink 《Histochemistry》1992,97(3):243-246
A new technique is presented for the external stabilization of cryostat sections by spraying the specimen surfaces with an aqueous solution of poly(vinyl alcohol) before each sectioning stroke. The spray freezes upon the surface and forms a tough coating which facilitates subsequent sectioning and handling especially of difficult material. The sections are affixed upon cold glass slides covered with an improved formulation of pressure-sensitive adhesive. During further processing of the affixed sections, the PVA-coating and any surrounding supporting medium dissolve without traces in the first aqueous incubation or staining solution. 相似文献
3.
S. Fink 《Histochemistry and cell biology》1992,97(3):243-246
Summary A new technique is presented for the external stabilization of cryostat sections by spraying the specimen surfaces with an aqueous solution of poly(vinyl alcohol) before each sectioning stroke. The spray freezes upon the surface and forms a tough coating which facilitates subsequent sectioning and handling especially of difficult material. The sections are affixed upon cold glass slides covered with an improved formulation of pressure-sensitive adhesive. During further processing of the affixed sections, the PVA-coating and any surrounding supporting medium dissolve without traces in the first aqueous incubation or staining solution. 相似文献
4.
Celloidin blocks of Golgi-Cox impregnated material are cut at 50 μ, the sections collected in 70% alcohol, transferred to a 3:1 mixture of absolute alcohol and chloroform for 2 min, and then stored in xylene or toluene for at least 3 min, or up to 2 wk until processed further. Mounting is done on glass slides which have been coated with fresh egg albumen diluted in 0.2% ammonia water (or a 0.5% solution of dry powdered egg albumen) and then dried at 60°C overnight. For attachment to these coated slides, sections are first soaked for 2-3 min in a freshly prepared mixture of methyl benzoate, 50 ml; benzyl alcohol, 200 ml; chloroform, 150 ml; and then transferred quickly to the slides by means of a brush. After 2-3 min the chloroform evaporates and the celloidin softens. The slides are then immersed in toluene which hardens the celloidin and anchors the sections to the slides. Alcohols of descending concentrations to 40% are followed by alkalinizations, first in: absolute alcohol, 40 ml; strong ammonia water 60 ml, for 2 min, then in: absolute alcohol, 70 ml; strong ammonia water, 30 ml, for 1 hr. Excess alkali is then removed by 70% and 40% alcohol, 2 min each, and a 10 min wash in running tap water. Bleaching in 1% Na2S2O3, for 10 min and washing again in tap water for 10 min completes the process preliminary to staining. The preparations are then stained for 90 min in an aqueous solution of either 0.5% cresylecht violet, neutral red, or Darrow red, buffered at pH 3.6. Dehydration and differentiation in ascending grades of alcohol, clearing with toluene or xylene, and applying a cover glass with a mounting medium having a refractive index of about 1.61 completes the process. 相似文献
5.
Donald L. Stilwell 《Biotechnic & histochemistry》1957,32(1):19-23
Blocks of fresh issue were fixed 2 or more days in: cobalt sulfate (or nitrate), 1 gm; distilled water, 80 ml; 10% calcium chloride, 10 ml; and formalin, 10 ml. The fixed tissue was washed thoroughly in tap water, embedded in gelatin, frozen sections cut, and mounted on slides with gelatin adhesive. The sections were stained 15-30 min in a saturated, filtered solution of Sudan black B in 70% alcohol, differentiated in 50% alcohol under microscopic observation, and a cover glass applied with glycerol-gelatin. In thick (50-100 μ) sections, myelin stained green to gray-green and this allowed easy differentiation between nerves and other tissue elements. 相似文献
6.
Arthur R. Spurr 《Biotechnic & histochemistry》1954,29(6):301-313
An aqueous histologic and cytologic mounting medium containing polyvinyl alcohol, cadmium iodide and fructose is described. It is used in the preparation of permanent slides and may be applied to sections stained and rinsed in water or in any concentration of ethyl alcohol. The medium forms a hard, tough, quick-drying film which adheres well to the slide and cover glass. It is nonfluorescent, clear, optically homogeneous, and isotropic; it does not admit bubbles under the cover glass or crystallize on drying. It prevents or minimizes the bleeding of many stains from the sections; a list of 60 dyes, mostly basic, is given. The fresh medium has a pH of 4.4. The refractive index of the fresh medium is nD20 1.4674; the dried film is nD 1.6020 which may be lowered to nD 1.5150 by decreasing the cadmium iodide in the formula. The viscosity at 25°C. is 7,299 centipoises. The medium has the following composition: distilled water, 40 g.; cadmium iodide, 34 g.; polyvinyl alcohol (Elvanol 51-05, du Pont's low viscosity grade) 18 g.; fructose, 8 g. The medium is prepared as follows: wash the polyvinyl alcohol with absolute methyl alcohol; dry and then grind in a mortar; dissolve the cadmium iodide in the water; add the polyvinyl alcohol while stirring with a speed-controlled motor-driven mixer; heat to 75°C. on a water bath with continuous stirring until dissolved; remove from the water bath and add the fructose while stirring; replace water lost by evaporation. The medium is ready for use when the foam has dispersed after standing. 相似文献
7.
Rat suprarenal glands fixed in Palade's 1% OsO4, buffered at pH 7.7 with veronal-acetate, to which 0.1% MgCl2 was added, were embedded in Vestopal-W and sectioned at 0.2-1 µ. The sections were attached to slides by floating on water, without adhesive, and drying at 60-80° C, placed in acetone for 1 min and then treated with the following staining procedure: Place the preparation in a filtered solution of oil red O, 1 gm; 70% alcohol, 50 ml; and acetone, C.P., 50 ml; for 0.5-1 hr. Rinse in absolute ethyl alcohol; drain; counterstain with 0.5% aqueous thionin for 5 min; rinse in distilled water; drain; stain in 0.2% azure B in phosphate buffer at pH 9, for 5 min. Dry and apply a drop of immersion oil directly on the section. The preparations are temporary. Ciaccio-positive lipids, rendered insoluble by OsO, fixation, stained red to ochre. 相似文献
8.
Methods are proposed for staining plant chromosomes with the dye brilliant cresyl blue, and for making these stained preparations permanent by using polyvinyl alcohol mounting medium.
The stain, which is composed of 2% brilliant cresyl blue in 45% aqueous acetic or propionic acid, is used with fixed material in making smear preparations. The technics for staining are similar to those employed in the aceto-carmine method.
The mounting medium is made by mixing 56% polyvinyl alcohol, which is diluted in water to the consistency of thick molasses, with 22% lactic acid and 22% phenol by volume. The permanent slides are made by floating off the cover slip of the temporary slide in 70% alcohol, then applying the mounting medium and replacing the cover slip.
The chief advantages of the methods described are:
1)The preparation of the stain is rapid and simple. The batch of stain will be good with the first try.
2)The staining procedure in some instances is shorter than when using aceto-carmine.
3)The stain shows a high degree of specificity for nuclear structures and gives better results than aceto-carmine when used on certain plant tissues.
4)A minimum number of cells is lost in making the slides permanent when using polyvinyl alcohol mounting medium as the slide and cover slip are run through only one solution prior to mounting.
5)The mounting medium dries rapidly and this shortens the time required before critical examination of the permanent mounts can be made. 相似文献
The stain, which is composed of 2% brilliant cresyl blue in 45% aqueous acetic or propionic acid, is used with fixed material in making smear preparations. The technics for staining are similar to those employed in the aceto-carmine method.
The mounting medium is made by mixing 56% polyvinyl alcohol, which is diluted in water to the consistency of thick molasses, with 22% lactic acid and 22% phenol by volume. The permanent slides are made by floating off the cover slip of the temporary slide in 70% alcohol, then applying the mounting medium and replacing the cover slip.
The chief advantages of the methods described are:
1)The preparation of the stain is rapid and simple. The batch of stain will be good with the first try.
2)The staining procedure in some instances is shorter than when using aceto-carmine.
3)The stain shows a high degree of specificity for nuclear structures and gives better results than aceto-carmine when used on certain plant tissues.
4)A minimum number of cells is lost in making the slides permanent when using polyvinyl alcohol mounting medium as the slide and cover slip are run through only one solution prior to mounting.
5)The mounting medium dries rapidly and this shortens the time required before critical examination of the permanent mounts can be made. 相似文献
9.
H. C. Cook 《Biotechnic & histochemistry》1965,40(6):321-328
Equal-size pieces of spleen, liver, cerebrum, tonsil and myocardium were taken from human postmortem tissue and sections of the following kinds were made: cryostat, CO2 freezing microtome, paraffin, and double-embedded celloidin-paraffin. Fixation was in 10% formol-saline with the exception of the cryostat material which was fresh-frozen. The sections thus prepared were attached to identical sets of slides with glycerol-albumen, soluble starch, amylopectin starch, human plasma, 0.2% gelatin, 0.2% gelatin-formol, by flattening with 50% alcohol, and including a control slide without adhesive. Identical batches of the mounted sections were then dried overnight at 18-20, 37 and 56 C followed by washing in running tap water, 10% NH4OH at 18-20 C and 1% NaOH and 10% NaOH solution at 56 C over a period of 4 days. Sections separating from the slides during successive intervals of soaking showed that plasma was the overall best adhesive and 56 C the most effective drying temperature. Agar, in the limited tests applied, was found to be quite effective but had a tendency to take up nuclear dyes. 相似文献
10.
We describe a fast method for firm attachment of large plastic sections to glass slides with EVA-copolymers, commonly known as hot melt sticks. Solid hot melt sticks dissolve slowly in xylene to form an adhesive gel within 6 hours. Small drops of hot melt gel are applied to the corners of the sections and surrounding slide surface at ambient or elevated temperatures. The gel sticks to both the plastic and the glass slides. The hot melt “corner point method” prevented detachment of sections in staining procedures. As an additional technique, we suggest the use of hot melt adhesive for attaching plastic specimen blocks to wooden blocks or metallic specimen holders. 相似文献
11.
Ruby Rick Little 《Biotechnic & histochemistry》1957,32(2):79-83
Serial sections of cooked rice kernels may be obtained by following either of two dehydration schedules and embedding in Carbowax. In the first schedule the cooked, rinsed and drained kernels are immersed several days in a nonaqueous fixative composed of: isopropyl alcohol, 10 ml; propionic acid, 30 ml; acetone, 10 ml; methylal, 40 ml; dioxane, 30 ml; and propylene glycol, 30 ml (Newcomer's, modified), followed by 7 or 8 days in equal parts of propylene glycol, dioxane and glycerol (changed once), and 4 days on a warming table in the same mixture with 5% Carbowax added. The dehydrated kernels are then infiltrated 4-24 hr with a Carbowax embedding mixture. In the second schedule they are immersed several days in an aqueous solution consisting of: propylene glycol, 12.5 ml; polyethylene glycol 400, 12.5 ml; either with 75 ml of water containing 0.1% thymol, or with a mixture of water, 65 ml; formalin, 10 ml; CaCl2, 1 gm; and CdCl2, 1 gm; followed by 3 or 4 days in 50% propylene glycol, and 3 or 4 days on a warming table in 80% propylene glycol with 5% Carbowax added. Infiltration is as above. The composition of the embedding mixture is varied according to the temperature and humidity likely to prevail during sectioning. The texture of the wax may be improved by adding small amounts of gum arabic, spermaceti, and glycerol. Serial sections 3-10 μ thick are placed on clean dry slides, and adhesive dropped at the edges of the ribbon of Carbowax until it is dissolved. The adhesive consists of water-glass (concentrated solution), 1 ml; concentrated ammonia, 1 ml; Carbowax, 5 gm; and water, 98 ml. After the slides are dry they are stored, or immersed 10 min in chloroform, collodionized, and passed to staining solutions. Atmospheric conditions affect not only the Carbowax, but also the response to reagents of cooked rice and of sections. 相似文献
12.
《Biotechnic & histochemistry》2013,88(4):195-196
Specimens of both vertebrate and invertebrate nerve-containing tissues were fixed 2-3 days in Bouin's fluid, soaked 2 days in alcohol containing 2% strong ammonia water, dehydrated and embedded in paraffin. The sections were mounted with gelatin adhesive according to Masson's procedure, dewaxed, passed through graded alcohols to water, then back to 2% ammoniated 80% alcohol for 12-24 hours. The slides were rinsed 3-5 seconds in distilled water, impregnated about one and a half hours in 40% AgNO3 at increasing temperature up to 45°C. The slides were flooded with 62.5% formalin and this solution allowed to remain 3-5 minutes; they were then blotted with filter paper. A second impregnation in ammoniated silver carbonate, controlled under the microscope, was followed by a 10-minute treatment with 10% aqueous acetic acid, toning with gold chloride, then thiosulfate and finally washing. Counterstaining with ponceau red or acid fuchsin, eventually followed by aniline blue or fast green, dehydration and covering, completed the process. 相似文献
13.
E. Van Campenhout 《Biotechnic & histochemistry》1953,28(4):195-200
Specimens of both vertebrate and invertebrate nerve-containing tissues were fixed 2-3 days in Bouin's fluid, soaked 2 days in alcohol containing 2% strong ammonia water, dehydrated and embedded in paraffin. The sections were mounted with gelatin adhesive according to Masson's procedure, dewaxed, passed through graded alcohols to water, then back to 2% ammoniated 80% alcohol for 12-24 hours. The slides were rinsed 3-5 seconds in distilled water, impregnated about one and a half hours in 40% AgNO3 at increasing temperature up to 45°C. The slides were flooded with 62.5% formalin and this solution allowed to remain 3-5 minutes; they were then blotted with filter paper. A second impregnation in ammoniated silver carbonate, controlled under the microscope, was followed by a 10-minute treatment with 10% aqueous acetic acid, toning with gold chloride, then thiosulfate and finally washing. Counterstaining with ponceau red or acid fuchsin, eventually followed by aniline blue or fast green, dehydration and covering, completed the process. 相似文献
14.
A series of experiments with protargol staining of nerve fibers in mammalian adrenal glands has yielded the following procedure: Fix-1-2 days in a mixture of formamide (Eastman Kodak Company) 10 cc, chloral hydrate 5 g., and 50% ethyl alcohol 90 cc. Wash, dehydrate and embed in paraffin. Cut sections about 15 and mount on slides. Remove the paraffin and run down to distilled water. Mordant 1-2 days in a 1% aqueous solution of thallous (or lead) nitrate at 56-60°C. Wash thru several changes of distilled water and impregnate in 1% aqueous protargol (Winthrop Chemical Company) at 37-40°C. for 1 to 2 days. Rinse quickly in distilled water and differentiate 7-15 seconds in a 0.1% aqueous solution of oxalic acid. Rinse thru several changes of distilled water for a total time of 0.5 to 1.0 rain. Reduce 3-5 rain, in Bodian's reducer: hydroquinone 1 g., sodium sulfite 5 g., distilled water 100 cc. Wash in running water 3-5 min. and tone 5-10 min. in a 0.2% gold chloride solution. Wash 0.5 min. or more and reduce in a 2% oxalic acid solution to which has been added strong formalin, 1 cc. per 100. (Caution. This last reduction is critical and over-reduction can spoil an otherwise good stain; 15-30 seconds usually suffices, and the sections should show only the beginning of darkening to a purplish or gray color.) Wash, fix in hypo, wash, dehydrate and cover. 相似文献
15.
S Fink 《Stain technology》1987,62(2):93-99
Adhesion of various organic-solvent based adhesives to glass slides could be greatly improved by first priming the slide with a copolymer of allyl methacrylate and methacryloxypropyltrimethoxysilane. The use of different solvents and types of adhesives with these slides is discussed. Cellulose nitrate in different esters of acetic acid proved to be an effective adhesive for varied sections at room temperature and in the cryostat. Carbowax sections as a special case preferably were affixed with polyisobutylene in petroleum ether. Most of the attachments formed resisted even boiling water. 相似文献
16.
Siegfried Fink 《Biotechnic & histochemistry》1987,62(2):93-99
Adhesion of various organic-solvent based adhesives to glass slides could be greatly improved by first priming the slide with a copolymer of allyl methacrylate and methacryloxypropyltrimethoxysilane. The use of different solvents and types of adhesives with these slides is discussed. Cellulose nitrate in different esters of acetic acid proved to be an effective adhesive for varied sections at room temperature and in the cryostat. Carbowax sections as a special case preferably were affixed with polyisobutylene in petroleum ether. Most of the attachments formed resisted even boiling water. 相似文献
17.
J. Thomas Bell Jr. 《Biotechnic & histochemistry》1959,34(4):219-221
An oil red O fat stain is prepared by dissolving 250 mg of the dye in 100 ml of a 1% Tween 40 solution in 30% alcohol, and incubating the mixture at 60°C for 24 hr. The solution is then filtered at room temperature under vacuum through medium porosity frittedglass. Frozen sections cut from material fixed in CaCl2-CdCl2-formalin (1%:1%:10%) are placed in the stain for not less than 4 hr. After washing in the alcoholic-Tween solvent, they are mounted on glass slides from distilled water with Farrants' medium. The resulting preparations appear to be permanent, for in a 2-yr test they have remained free from stain crystalization and the fat particles are still discrete and dark red. 相似文献
18.
A method is described for preparing cake crumb for sectioning and staining. Previous to embedding, the fat was stained and fixed by exposing small blocks of cake to the fumes from a 5%, freshly-prepared, aqueous solution of osmic acid (OsO4). This was followed by dehydration in ethyl alcohol and tertiary butyl alcohol, removal of air under vacuum and infiltration with paraffin.
Sections were cut 20 and 9Op thick and mounted with water.
Wax was removed by immersion in xylene. The sections were rehydrated in a series of ethyl alcohol dilutions, from concentrated to dilute, then transferred to distilled water.
Protein was then stained pink by immersion of the slides in an acidified 0.04% water solution of eosin Y, or starch was stained blue with a dilute aqueous solution of iodine. Ten grams iodine and 10 g. KI were dissolved in 25 ml. distilled water. This stock solution was diluted for use one to two hundred times.
The relationship between protein and starch was demonstrated by staining the sections with eosin, differentiating in 50% alcohol and staining with iodine.
When slides of cake crumb were prepared in this way, the fat was stained black, the protein bright pink and the starch granules a dark blue. 相似文献
Sections were cut 20 and 9Op thick and mounted with water.
Wax was removed by immersion in xylene. The sections were rehydrated in a series of ethyl alcohol dilutions, from concentrated to dilute, then transferred to distilled water.
Protein was then stained pink by immersion of the slides in an acidified 0.04% water solution of eosin Y, or starch was stained blue with a dilute aqueous solution of iodine. Ten grams iodine and 10 g. KI were dissolved in 25 ml. distilled water. This stock solution was diluted for use one to two hundred times.
The relationship between protein and starch was demonstrated by staining the sections with eosin, differentiating in 50% alcohol and staining with iodine.
When slides of cake crumb were prepared in this way, the fat was stained black, the protein bright pink and the starch granules a dark blue. 相似文献
19.
Aqueous solutions combining a high concentration of formaldehyde (4%) with low concentrations of glutaraldehyde (0.5--01%) have been used to simultaneously localize amines by the formation of fluorescent products and to fix central nervous tissue for electron microscopy. The fluorescence reaction is produced by the aldehyde mixture at room temperature and the fluorescence is stable when the tissue is maintained in aqueous solution. This means that nerve cell bodies and terminal fields which contain catecholamines can be located accurately in vibratome sections at the light microscope level and, after further processing, can be examined under the electron microscope. With 1% glutaraldehyde in the aldehyde mixture, ultrastructural details are well preserved; there is no significant distortion of any component of the tissue. If vibratome or cryostat sections are dried against glass slides, the intensity of the fluorescence reaction is enhanced and the sections can be permanently mounted. 相似文献
20.
M Slater 《Stain technology》1989,64(6):297-299
A continuing problem in immunogold labeling of 1 microns LR White sections for light microscopy is the lack of adherence of the sections to the glass microscope slides during silver enhancement. A technique is described to overcome this problem using a 2% Formvar solution to coat the glass. 相似文献