Dissociative phosphoryl transfer in PEP mutase catalysis: structure of the enzyme/sulfopyruvate complex and kinetic properties of mutants

The crystal structure of PEP mutase from Mytilus edulis in complex with a substrate-analogue inhibitor, sulfopyruvate S-pyr (K(i) = 22 microM), has been determined at 2.25 A resolution. Mg(II)-S-pyr binds in the alpha/beta barrel's central channel, at the C-termini of the beta-strands. The binding mode of S-pyr's pyruvyl moiety resembles the binding mode of oxalate seen earlier. The location of the sulfo group of S-pyr is postulated to mimic the phosphonyl group of the product phosphonopyruvate (P-pyr). This sulfo group interacts with the guanidinium group of Arg159, but it is not aligned for nucleopilic attack by neighboring basic amino side chains. Kinetic analysis of site directed mutants, probing the key active site residues Asp58, Arg159, Asn122, and His190 correlate well with the structural information. The results presented here rule out a phosphoryl transfer mechanism involving a double displacement, and suggest instead that PEP mutase catalysis proceeds via a dissociative mechanism in which the pyruvyl C(3) adds to the same face of the phosphorus from which the C(2)O departs. We propose that Arg159 and His190 serve to hold the phosphoryl/metaphosphate/phosphonyl group stationary along the reaction pathway, while the pyruvyl C(1)-C(2) bond rotates upon formation of the metaphosphate. In agreement with published data, the phosphoryl group transfer occurs on the Si-face of PEP with retention of configuration at phosphorus.     

Conformational flexibility of PEP mutase

Previous work has indicated that PEP mutase catalyzes the rearrangement of phosphoenolpyruvate to phosphonopyruvate by a dissociative mechanism. The crystal structure of the mutase with Mg(II) and sulfopyruvate (a phosphonopyruvate analogue) bound showed that the substrate is anchored to the active site by the Mg(II), and shielded from solvent by a large loop (residues 115-133). Here, the crystal structures of wild-type and D58A mutases, in the apo state and in complex with Mg(II), are reported. In both unbound and Mg(II)-bound states, the active site is accessible to the solvent. The loop (residues 115-133), which in the enzyme-inhibitor complexes covers the active site cavity, is partially disordered or adopts a conformation that allows access to the cavity. In the apo state, the residues associated with Mg(II) binding are poised to accept the metal ion. When Mg(II) binds, the coordination is the same as that previously observed in the enzyme-Mg(II) sulfopyruvate complex, except that the coordination positions occupied by two ligand oxygen atoms are occupied by two water molecules. When the loop opens, three key active site residues are displaced from the active site, Lys120, Asn122, and Leu124. Lys120 mediates Mg(II) coordination. Asn122 and Leu124 surround the transferring phosphoryl group, and thus prevent substrate hydrolysis. Amino acid replacement of any one of these three loop residues results in a significant loss of catalytic activity. It is hypothesized that the loop serves to gate the mutase active site, interconverting between an open conformation that allows substrate binding and product release and a closed conformation that separates the reaction site from the solvent during catalysis.     

Structure and function of PA4872 from Pseudomonas aeruginosa, a novel class of oxaloacetate decarboxylase from the PEP mutase/isocitrate lyase superfamily

Pseudomonas aeruginosa PA4872 was identified by sequence analysis as a structurally and functionally novel member of the PEP mutase/isocitrate lyase superfamily and therefore targeted for investigation. Substrate screens ruled out overlap with known catalytic functions of superfamily members. The crystal structure of PA4872 in complex with oxalate (a stable analogue of the shared family alpha-oxyanion carboxylate intermediate/transition state) and Mg2+ was determined at 1.9 A resolution. As with other PEP mutase/isocitrate lyase superfamily members, the protein assembles into a dimer of dimers with each subunit adopting an alpha/beta barrel fold and two subunits swapping their barrel's C-terminal alpha-helices. Mg2+ and oxalate bind in the same manner as observed with other superfamily members. The active site gating loop, known to play a catalytic role in the PEP mutase and lyase branches of the superfamily, adopts an open conformation. The Nepsilon of His235, an invariant residue in the PA4872 sequence family, is oriented toward a C(2) oxygen of oxalate analogous to the C(3) of a pyruvyl moiety. Deuterium exchange into alpha-oxocarboxylate-containing compounds was confirmed by 1H NMR spectroscopy. Having ruled out known activities, the involvement of a pyruvate enolate intermediate suggested a decarboxylase activity of an alpha-oxocarboxylate substrate. Enzymatic assays led to the discovery that PA4872 decarboxylates oxaloacetate (kcat = 7500 s(-1) and Km = 2.2 mM) and 3-methyloxaloacetate (kcat = 250 s(-1) and Km = 0.63 mM). Genome context of the fourteen sequence family members indicates that the enzyme is used by select group of Gram-negative bacteria to maintain cellular concentrations of bicarbonate and pyruvate; however the decarboxylation activity cannot be attributed to a pathway common to the various bacterial species.     

Helix swapping between two alpha/beta barrels: crystal structure of phosphoenolpyruvate mutase with bound Mg(2+)-oxalate.

BACKGROUND: Phosphonate compounds are important secondary metabolites in nature and, when linked to macromolecules in eukaryotes, they might play a role in cell signaling. The first obligatory step in the biosynthesis of phosphonates is the formation of a carbon-phosphorus bond by converting phosphoenolpyruvate (PEP) to phosphonopyruvate (P-pyr), a reaction that is catalyzed by PEP mutase. The PEP mutase functions as a tetramer and requires magnesium ions (Mg2+). RESULTS: The crystal structure of PEP mutase from the mollusk Mytilus edulis, bound to the inhibitor Mg(2+)-oxalate, has been determined using multiwavelength anomalous diffraction, exploiting the selenium absorption edge of a selenomethionine-containing protein. The structure has been refined at 1.8 A resolution. PEP mutase adopts a modified alpha/beta barrel fold, in which the eighth alpha helix projects away from the alpha/beta barrel instead of packing against the beta sheet. A tightly associated dimer is formed, such that the two eighth helices are swapped, each packing against the beta sheet of the neighboring molecule. A dimer of dimers further associates into a tetramer. Mg(2+)-oxalate is buried close to the center of the barrel, at the C-terminal ends of the beta strands. CONCLUSIONS: The tetramer observed in the crystal is likely to be physiologically relevant. Because the Mg(2+)-oxalate is inaccessible to solvent, substrate binding and dissociation might be accompanied by conformational changes. A mechanism involving a phosphoenzyme intermediate is proposed, with Asp58 acting as the nucleophilic entity that accepts and delivers the phosphoryl group. The active-site architecture and the chemistry performed by PEP mutase are different from other alpha/beta-barrel proteins that bind pyruvate or PEP, thus the enzyme might represent a new family of alpha/beta-barrel proteins.     

Investigation of metal ion binding in phosphonoacetaldehyde hydrolase identifies sequence markers for metal-activated enzymes of the HAD enzyme superfamily

The 2-haloalkanoic acid dehalogenase (HAD) family, which contains both carbon and phosphoryl transferases, is one of the largest known enzyme superfamilies. HAD members conserve an alpha,beta-core domain that frames the four-loop active-site platform. Each loop contributes one or more catalytic groups, which function in mediating the core chemistry (i.e., group transfer). In this paper, we provide evidence that the number of carboxylate residues on loop 4 and their positions (stations) on the loop are determinants, and therefore reliable sequence markers, for metal ion activation among HAD family members. Using this predictor, we conclude that the vast majority of the HAD members utilize a metal cofactor. Analysis of the minimum requirements for metal cofactor binding was carried out using Mg(II)-activated Bacillus cereus phosphonoacetaldehyde hydrolase (phosphonatase) as an experimental model for metal-activated HAD members. Mg(II) binding occurs via ligation to the loop 1 Asp12 carboxylate and Thr14 backbone carbonyl and to the loop 4 Asp186 carboxylate. The loop 4 Asp190 forms a hydrogen bond to the Mg(II) water ligand. X-ray structure determination of the D12A mutant in the presence of the substrate phosphonoacetaldehyde showed that replacement of the loop 1 Asp, common to all HAD family members, with Ala shifts the position of Mg(II), thereby allowing innersphere coordination to Asp190 and causing a shift in the position of the substrate. Kinetic analysis of the loop 4 mutants showed that Asp186 is essential to cofactor binding while Asp190 simply enhances it. Within the phosphonatase subfamily, Asp186 is stringently conserved, while either position 185 or position 190 is used to position the second loop 4 Asp residue. Retention of a high level of catalytic activity in the G185D/D190G phosphonatase mutant demonstrated the plasticity of the metal binding loop, reflected in the variety of combinations in positioning of two or three Asp residues along the seven-residue motif of the 2700 potential HAD sequences that were examined.     

Catalytic cycling in beta-phosphoglucomutase: a kinetic and structural analysis

Lactococcus lactis beta-phosphoglucomutase (beta-PGM) catalyzes the interconversion of beta-d-glucose 1-phosphate (beta-G1P) and beta-d-glucose 6-phosphate (G6P), forming beta-d-glucose 1,6-(bis)phosphate (beta-G16P) as an intermediate. Beta-PGM conserves the core domain catalytic scaffold of the phosphatase branch of the HAD (haloalkanoic acid dehalogenase) enzyme superfamily, yet it has evolved to function as a mutase rather than as a phosphatase. This work was carried out to identify the structural basis underlying this diversification of function. In this paper, we examine beta-PGM activation by the Mg(2+) cofactor, beta-PGM activation by Asp8 phosphorylation, and the role of cap domain closure in substrate discrimination. First, the 1.90 A resolution X-ray crystal structure of the Mg(2+)-beta-PGM complex is examined in the context of previously reported structures of the Mg(2+)-alpha-d-galactose-1-phosphate-beta-PGM, Mg(2+)-phospho-beta-PGM, and Mg(2+)-beta-glucose-6-phosphate-1-phosphorane-beta-PGM complexes to identify conformational changes that occur during catalytic turnover. The essential role of Asp8 in nucleophilic catalysis was confirmed by demonstrating that the D8A and D8E mutants are devoid of catalytic activity. Comparison of the ligands to Mg(2+) in the different complexes shows that a single Mg(2+) coordination site must alternatively accommodate water, phosphate, and the phosphorane intermediate during catalytic turnover. Limited involvement of the HAD family metal-binding loop in Mg(2+) anchoring in beta-PGM is consistent with the relatively loose binding indicated by the large K(m) for Mg(2+) activation (270 +/- 20 microM) and with the retention of activity found in the E169A/D170A double loop mutant. Comparison of the relative positions of cap and core domains in the different complexes indicated that interaction of cap domain Arg49 with the "nontransferring" phosphoryl group of the substrate ligand might stabilize the cap-closed conformation, as required for active site desolvation and alignment of Asp10 for acid-base catalysis. Kinetic analyses of the specificity of beta-PGM toward phosphoryl group donors and the specificity of phospho-beta-PGM toward phosphoryl group acceptors were carried out. The results support a substrate induced-fit mechanism of beta-PGM catalysis, which allows phosphomutase activity to dominate over the intrinsic phosphatase activity. Last, we present evidence that the autophosphorylation of beta-PGM by the substrate beta-G1P accounts for the origin of phospho-beta-PGM in the cell.     

The monomer/dimer transition of enzyme I of the Escherichia coli phosphotransferase system

Enzyme I (EI) is the first protein in the phosphotransfer sequence of the bacterial phosphoenolpyruvate:glycose phosphotransferase system. This system catalyzes sugar phosphorylation/transport and is stringently regulated. Since EI homodimer accepts the phosphoryl group from phosphoenolpyruvate (PEP), whereas the monomer does not, EI may be a major factor in controlling sugar uptake. Previous work from this and other laboratories (e.g. Dimitrova, M. N., Szczepanowski, R. H., Ruvinov, S. B., Peterkofsky, A., and Ginsburg A. (2002) Biochem. 41, 906-913), indicate that K(a) is sensitive to several parameters. We report here a systematic study of K(a) determined by sedimentation equilibrium, which showed that it varied by 1000-fold, responding to virtually every parameter tested, including temperature, phosphorylation, pH (6.5 versus 7.5), ionic strength, and especially the ligands Mg(2+) and PEP. This variability may be required for a regulatory protein. Further insight was gained by analyzing EI by sedimentation velocity, by near UV CD spectroscopy, and with a nonphosphorylatable active site mutant, EI-H189Q, which behaved virtually identically to EI. The singular properties of EI are explained by a model consistent with the results reported here and in the accompanying paper (Patel, H. V., Vyas, K. A., Mattoo, R. L., Southworth, M., Perler, F. B., Comb, D., and Roseman, S. (2006) J. Biol. Chem. 281, 17579-17587). We suggest that EI and EI-H189Q each comprise a multiplicity of conformers and progressively fewer conformers as they dimerize and bind Mg(2+) and finally PEP. Mg(2+) alone induces small or no detectable changes in structure, but large conformational changes ensue with Mg(2+)/PEP. This effect is explained by a "swiveling mechanism" (similar to that suggested for pyruvate phosphate dikinase (Herzberg, O., Chen, C. C., Kapadia, G., McGuire, M., Carroll, L. J., Noh, S. J., and Dunaway-Mariano, D. (1996) Proc. Natl. Acad. Sci. U. S. A. 93, 2652-2657)), which brings the C-terminal domain with the two bound ligands close to the active site His(189).     

Mutational analysis of the nuclease domain of Escherichia coli ribonuclease III. Identification of conserved acidic residues that are important for catalytic function in vitro

The ribonuclease III superfamily represents a structurally distinct group of double-strand-specific endonucleases with essential roles in RNA maturation, RNA decay, and gene silencing. Bacterial RNase III orthologs exhibit the simplest structures, with an N-terminal nuclease domain and a C-terminal double-stranded RNA-binding domain (dsRBD), and are active as homodimers. The nuclease domain contains conserved acidic amino acids, which in Escherichia coli RNase III are E38, E41, D45, E65, E100, D114, and E117. On the basis of a previously reported crystal structure of the nuclease domain of Aquifex aeolicus RNase III, the E41, D114, and E117 side chains of E. coli RNase III are expected to be coordinated to a divalent metal ion (Mg(2+) or Mn(2+)). It is shown here that the RNase III[E41A] and RNase III[D114A] mutants exhibit catalytic activities in vitro in 10 mM Mg(2+) buffer that are comparable to that of the wild-type enzyme. However, at 1 mM Mg(2+), the activities are significantly lower, which suggests a weakened affinity for metal. While RNase III[E41A] and RNase III[D114A] have K(Mg) values that are approximately 2.8-fold larger than the K(Mg) of RNase III (0.46 mM), the RNase III[E41A/D114A] double mutant has a K(Mg) of 39 mM, suggesting a redundant function for the two side chains. RNase III[E38A], RNase III[E65A], and RNase III[E100A] also require higher Mg(2+) concentrations for optimal activity, with RNase III[E100A] exhibiting the largest K(Mg). RNase III[D45A], RNase III[D45E], and RNase III[D45N] exhibit negligible activities, regardless of the Mg(2+) concentration, indicating a stringent functional requirement for an aspartate side chain. RNase III[D45E] activity is partially rescued by Mn(2+). The potential functions of the conserved acidic residues are discussed in the context of the crystallographic data and proposed catalytic mechanisms.     

Caught in the act: the structure of phosphorylated beta-phosphoglucomutase from Lactococcus lactis

Phosphoglucomutases catalyze the interconversion of D-glucose 1-phosphate and D-glucose 6-phosphate, a reaction central to energy metabolism in all cells and to the synthesis of cell wall polysaccharides in bacterial cells. Two classes of phosphoglucomutases (alpha-PGM and beta-PGM) are distinguished on the basis of their specificity for alpha- and beta-glucose-1-phosphate. beta-PGM is a member of the haloacid dehalogenase (HAD) superfamily, which includes the sarcoplasmic Ca(2+)-ATPase, phosphomannomutase, and phosphoserine phosphatase. beta-PGM is unusual among family members in that the common phosphoenzyme intermediate exists as a stable ground-state complex in this enzyme. Herein we report, for the first time, the three-dimensional structure of a beta-PGM and the first view of the true phosphoenzyme intermediate in the HAD superfamily. The crystal structure of the Mg(II) complex of phosphorylated beta-phosphoglucomutase (beta-PGM) from Lactococcus lactis has been determined to 2.3 A resolution by multiwavelength anomalous diffraction (MAD) phasing on selenomethionine, and refined to an R(cryst) = 0.24 and R(free) = 0.28. The active site of beta-PGM is located between the core and the cap domain and is freely solvent accessible. The residues within a 6 A radius of the phosphorylated Asp8 include Asp10, Thr16, Ser114, Lys145, Glu169, and Asp170. The cofactor Mg(2+) is liganded with octahedral coordination geometry by the carboxylate side chains of Asp8, Glu169, Asp170, and the backbone carbonyl oxygen of Asp10 along with one oxygen from the Asp8-phosphoryl group and one water ligand. The phosphate group of the phosphoaspartyl residue, Asp8, interacts with the side chains of Ser114 and Lys145. The absence of a base residue near the aspartyl phosphate group accounts for the persistence of the phosphorylated enzyme under physiological conditions. Substrate docking shows that glucose-6-P can bind to the active site of phosphorylated beta-PGM in such a way as to position the C(1)OH near the phosphoryl group of the phosphorylated Asp8 and the C(6) phosphoryl group near the carboxylate group of Asp10. This result suggests a novel two-base mechanism for phosphoryl group transfer in a phosphorylated sugar.     

The substrate proton of the pyruvate kinase reaction

The pyruvate kinase reaction occurs in separate phosphate- and proton-transfer stages: (formula; see text) K+, Mg2+, and Mg.ADP are known to be required for the phosphoryl transfer step, and K+ and Mg2+ with allosteric stimulation by MgATP are important for proton transfer. This paper uses the isotope trapping method with 3H-labeled water to identify the proton donor and determine when in the sequence of the catalytic cycle it is generated. When the enzyme was allowed to exchange briefly with 3H2O (pulse phase) and then diluted into a mixture containing PEP, ADP, and the cofactor K+, Mg2+, or Co2+ in D2O (chase phase), an amount of [3H]pyruvate was formed in great excess of the amount expected from steady-state catalysis in the diluted 3H-labeled water. With K+, Mg2+, and ADP at pH 6-9.5 in the pulse phase, a limit of 1.25 enzyme equiv of 3H were trapped. The concentration of PEP required for half-maximum trapping was 14-fold greater than its steady-state Km. Therefore, the rate constant for dissociation of the donor proton is estimated to be 14 times the steady-state rate of [3H]pyruvate formation, approximately 109 s-1, or 1500 s-1. At pD 6.4, Mg2+ and ADP were required in the chase, indicating that the ADP in the pulse was not bound tightly enough to be used in the chase. At pD 9.4, ADP was not required in the chase, only Mg2+ or Co2+, making it possible to limit the chase to one turnover from hybrid labeled complexes such as E.K.Mg.CoADP or E.K.Co.MgADP and PEP.(ABSTRACT TRUNCATED AT 250 WORDS)     

18O-exchange evidence that mutations of arginine in a signature sequence for P-type pumps affect inorganic phosphate binding

We have proposed a model for part of the catalytic site of P-type pumps in which arginine in a signature sequence functions like lysine in P-loop-containing enzymes that catalyze adenosine 5'-triphosphate hydrolysis [Smirnova, I. N., Kasho, V. N., and Faller, L. D. (1998) FEBS Lett. 431, 309-314]. The model originated with evidence from site-directed mutagenesis that aspartic acid in the DPPR sequence of Na,K-ATPase binds Mg(2+) [Farley, R. A., et al. (1997) Biochemistry 36, 941-951]. It was developed by assuming that the catalytic domain of P-type pumps evolved from enzymes that catalyze phosphoryl group transfer. The functions of the positively charged amino group in P-loops are to bind substrate and to facilitate nucleophilic attack upon phosphorus by polarizing the gamma-phosphorus-oxygen bond. To test the prediction that the positively charged guanidinium group of R596 in human alpha(1) Na,K-ATPase participates in phosphoryl group transfer, the charge was progressively decreased by site-directed mutagenesis. Mutants R596K, -Q, -T, -M, -A, -G, and -E were expressed in yeast membranes, and their ability to catalyze phosphorylation with inorganic phosphate was evaluated by following (18)O exchange. R596K, in which the positive charge is retained, resembled the wild type. Substitution of a negative charge (R596E) resulted in complete loss of activity. The remaining mutants with uncharged side chains had both lowered affinity for inorganic phosphate and altered phosphate isotopomer distributions, consistent with increased phosphate-off rate constants compared to that of the wild type. Therefore, mutations of R596 strengthen our hypothesis that the oppositely charged side chains of the DPPR peptide in Na,K-ATPase form a quaternary complex with magnesium phosphate.     

A catalytically deficient active site variant of PvuII endonuclease binds Mg(II) ions

In efforts to understand the mechanisms of many nucleic acid enzymes, the first site-directed mutations are made at conserved acidic active residues. Almost without exception, the low or null activities of the resulting variants are attributed to the importance of the acidic residue(s) to the ligation of required metal ions. Using (25)Mg NMR spectroscopy as a direct probe of metal ion binding and the homodimeric PvuII restriction endonuclease as a model system, this interpretation is examined and clarified. Our results indicate that Mg(II) binds wild-type PvuII endonuclease in the absence of DNA with a K(d,app) of 1.9 mM. Hill analysis yields an n(H) coefficient of 1.4, a value consistent with the binding of more than one Mg(II) ion per monomer active site. Variable pH studies indicate that two ionizable groups are responsible for Mg(II) binding by wild-type PvuII endonuclease near physiological pH. The pK(a,app) for these ionizations is 6.7, a value which is unusual for acidic residues but consistent with data obtained for critical groups in MunI endonuclease and a number of other hydrolases. To assign residues critical to ligating Mg(II), binding measurements were performed on the low activity catalytic site mutants E68A and D58A. As expected, E68A binds Mg(II) ions very weakly (K(d,app) approximately 40 mM), implicating Glu68 as critical to Mg(II) binding. Interestingly, while D58A has only residual specific activity, it retains an affinity for Mg(II) with a K(d,app) of 3.6 mM and exhibits a Hill coefficient of 0.7. Moreover, in this variant, multiple ionizable groups with pK(a,app) of 7.2 are involved in Mg(II) binding, suggesting a shuffling of Mg(II) ligands in the active site. These data indicate that Asp58 is important for the critical positioning of metal ion(s) required for catalysis.     

Phosphorylation of the sarcoplasmic calcium-activated adenosinetriphosphatase as studied by 31P nuclear magnetic resonance

A reinvestigation of a study of Fossel et al. [Fossel, E. T., Post, R. L., O'Hara, D.S., & Smith, T. W. (1981) Biochemistry 20, 7215-7219] in which the 31P nuclear magnetic resonance (NMR) signal of the phosphointermediate of the sarcoplasmic (Ca2+, Mg2+)-ATPase has been identified shows that the signal they describe most probably originates from free Mg . ATP but not from the phosphoenzyme itself. It was possible to detect the 31P NMR signal of the phosphoenzyme in peptic fragments of sarcoplasmic ATPase phosphorylated either by ATP or by inorganic phosphate. The two products exhibit the same spectral characteristics in 31P NMR, implying that most probably both reaction pathways yield the same chemical product. Chemical shifts at low pH (-6.5 ppm) and high pH (-1.4 ppm) of the phosphoryl group are indicative of a beta-phosphoaspartyl moiety, thus confirming independently the results from chemical analysis. The relatively low pK value of 4.3 of the phosphoryl group suggests an interaction with a positively charged group of the enzyme.     

Conformational studies of the interdomain linker peptides in the dihydrolipoyl acetyltransferase component of the pyruvate dehydrogenase multienzyme complex of Escherichia coli.

Two peptides (PEP1, 26 residues, and PEP2, 22 residues) were synthesized with amino acid sequences identical to two of the long segments of polypeptide chain rich in alanine, proline, and charged amino acids that link the lipoyl domains together in the dihydrolipoyl acetyltransferase component of the pyruvate dehydrogenase multienzyme complex of Escherichia coli. The circular dichroism and 400-MHz 1H NMR spectra of the peptides indicated that they lacked regular secondary structure. Even in the presence of 45% (v/v) hexafluoroisopropanol, they appeared to acquire a helical content of only 23-25%. However, 13C NMR spectroscopy revealed that the Ala-Pro peptide bonds were all (> 95%) in the trans configuration, compared with a value of 87% for the Ala-Pro bond in the model peptide AAPA, which is a recurrent sequence motif in PEP1 and PEP2. Likewise in peptides representing the N- and C-terminal halves of peptide PEP2, the Ala-Pro bonds were again all (> 95%)-trans, suggesting that peptide length is the essential determinant of the cis:trans ratio. Antisera were raised against peptides PEP2 and PEP3, the latter representing a third interdomain segment of polypeptide chain (Radford, S. E., Laue, E. D., Perham, R. N., Martin, S. R., and Appella, E. (1989a) J. Biol. Chem. 264, 767-775). Despite extensive sequence similarity among peptides PEP1, PEP2, and PEP3, only limited immunological cross-reactivity was observed, which suggests that the antigenic epitope(s) in the peptides are different and distinct. It is likely that these peptides are representative of a class of inter-domain linkers or spacers found in a wide variety of proteins and endowed with varying degrees of flexibility and stiffness to match their particular biological purpose.     

Identification of substrate contact residues important for the allosteric regulation of phosphofructokinase from Eschericia coli

The side chains of Escherichia coli phosphofructokinase (EcPFK) that interact with bound substrate, fructose 6-phosphate (Fru-6-P), are examined for their potential roles in allosteric regulation. Mutations that severely decrease Fru-6-P affinity and/or k(cat)/K(m) were created at each contact residue, with the exception of the catalytic base, D127. Even though Fru-6-P affinity was greatly decreased for R162E, M169A, E222A/H223A, and R243E, the mutated proteins retained the ability to be activated by MgADP and inhibited by phosphoenolpyruvate (PEP). R252E did not show an allosteric response to either MgADP or PEP. The H249E mutation retained MgADP activation but did not respond to PEP. R72E, T125A, and R171E maintained allosteric inhibition by PEP. Both R72E and T125A displayed a MgADP-dependent decrease in k(cat) but no MgADP-dependent K-type effects. R171E maintained MgADP-dependent K-type activation but also displayed a MgADP-dependent decrease in k(cat). Localization of mutations that alter MgADP activation near the transferred phosphate group indicates the importance of the 1-methoxy region of Fru-6-P in allosteric regulation by MgADP. A region near the 6'-phosphate may be similarly important for PEP inhibition. R252 is uniquely positioned between the 1'- and 6'-phosphates of bound Fru-1,6-BP, and the mutation at this position may alter both allosterically responsive regions. The differential functions of specific regions in the Fru-6-P contact residues support different mechanisms for allosteric activation and inhibition. In addition, the lack of correlation between mutations that decrease Fru-6-P affinity and those that abolish allosteric communications supports the independence of affinity and allosteric coupling.     

Isolation of BamHI variants with reduced cleavage activities

Derivation of the bamhIR sequence (Brooks, J. E., Nathan, P.D., Landry, D., Sznyter, L.A., Waite-Rees, P., Ives, C. C., Mazzola, L. M., Slatko, B. E., and Benner, J. S. (1991) Nucleic Acids Res., in press), the gene coding for BamHI endonuclease, has facilitated construction of an Escherichia coli strain that overproduces BamHI endonuclease (W. E. Jack, L. Greenough, L. F. Dorner, S. Y. Xu, T. Strezelecka, A. K. Aggarwal, and I. Schildkraut, submitted for publication). As expected, low-level constitutive expression of the bamhIR gene in E. coli from the Ptac promotor construct is lethal to the host unless the bamHIM gene, which encodes the BamHI methylase, is also expressed within the cell. We identified four classes of BamHI endonuclease variants deficient in catalysis by selecting for survival of a host deficient for bamHIM gene, transformed with mutagenized copies of the bamhIR gene, and then screening the surviving cell extracts for DNA cleavage and binding activities. Class I variants (G56S, G91S/T153I, T114I, G130R, E135K, T153I, T157I, G194D) displayed 0.1-1% of the wild-type cleavage activity; class II variant (D94N) lacked cleavage activity but retained wild-type DNA binding specificity; class III variants (E77K, E113K) lacked cleavage activity but bound DNA more tightly; class IV variants (G56D, G90D, G91S, R122H, R155H) lacked both binding and cleavage activities. Variants with residual cleavage activities induced the E. coli SOS response and thus are presumed to cleave chromosomal DNA in vivo. We conclude that Glu77, Asp94, and Glu113 residues are essential for BamHI catalytic function.     

MeaB is a component of the methylmalonyl-CoA mutase complex required for protection of the enzyme from inactivation

Adenosylcobalamin-dependent methylmalonyl-CoA mutase catalyzes the interconversion of methylmalonyl-CoA and succinyl-CoA. In humans, deficiencies in the mutase lead to methylmalonic aciduria, a rare disease that is fatal in the first year of life. Such inherited deficiencies can result from mutations in the mutase structural gene or from mutations that impair the acquisition of cobalamins. Recently, a human gene of unknown function, MMAA, has been implicated in methylmalonic aciduria (Dobson, C. M., Wai, T., Leclerc, D., Wilson, A., Wu, X., Dore, C., Hudson, T., Rosenblatt, D. S., and Gravel, R. A. (2002) Proc. Natl. Acad. Sci. U. S. A. 99, 15554-15559). MMAA orthologs are widespread in bacteria, archaea, and eukaryotes. In Methylobacterium extorquens AM1, a mutant defective in the MMAA homolog meaB was unable to grow on C(1) and C(2) compounds because of the inability to convert methylmalonyl-CoA to succinyl-CoA (Korotkova N., Chistoserdova, L., Kuksa, V., and Lidstrom, M. E. (2002) J. Bacteriol. 184, 1750-1758). Here we demonstrate that this defect is not due to the absence of adenosylcobalamin but due to an inactive form of methylmalonyl-CoA mutase. The presence of active mutase in double mutants defective in MeaB and in the synthesis of either R-methylmalonyl-CoA or adenosylcobalamin indicates that MeaB is necessary for protection of mutase from inactivation during catalysis. MeaB and methylmalonyl-CoA mutase from M. extorquens were cloned and purified in their active forms. We demonstrated that MeaB forms a complex with methylmalonyl-CoA mutase and stimulates in vitro mutase activity. These results support the hypothesis that MeaB functions to protect methylmalonyl-CoA mutase from irreversible inactivation.     

Swiveling domain mechanism in pyruvate phosphate dikinase

Pyruvate phosphate dikinase (PPDK) catalyzes the reversible conversion of phosphoenolpyruvate (PEP), AMP, and Pi to pyruvate and ATP. The enzyme contains two remotely located reaction centers: the nucleotide partial reaction takes place at the N-terminal domain, and the PEP/pyruvate partial reaction takes place at the C-terminal domain. A central domain, tethered to the N- and C-terminal domains by two closely associated linkers, contains a phosphorylatable histidine residue (His455). The molecular architecture suggests a swiveling domain mechanism that shuttles a phosphoryl group between the two reaction centers. In an early structure of PPDK from Clostridium symbiosum, the His445-containing domain (His domain) was positioned close to the nucleotide binding domain and did not contact the PEP/pyruvate-binding domain. Here, we present the crystal structure of a second conformational state of C. symbiosum PPDK with the His domain adjacent to the PEP-binding domain. The structure was obtained by producing a three-residue mutant protein (R219E/E271R/S262D) that introduces repulsion between the His and nucleotide-binding domains but preserves viable interactions with the PEP/pyruvate-binding domain. Accordingly, the mutant enzyme is competent in catalyzing the PEP/pyruvate half-reaction but the overall activity is abolished. The new structure confirms the swivel motion of the His domain. In addition, upon detachment from the His domain, the two nucleotide-binding subdomains undergo a hinge motion that opens the active-site cleft. A similar hinge motion is expected to accompany nucleotide binding (cleft closure) and release (cleft opening). A model of the coupled swivel and cleft opening motions was generated by interpolation between two end conformations, each with His455 positioned for phosphoryl group transfer from/to one of the substrates. The trajectory of the His domain avoids major clashes with the partner domains while preserving the association of the two linker segments.     

Synthesis of phosphoenol pyruvate (PEP) analogues and evaluation as inhibitors of PEP-utilizing enzymes.

The synthesis of 10 new phosphoenolpyruvate (PEP) analogues with modifications in the phosphate and the carboxylate function is described. Included are two potential irreversible inhibitors of PEP-utilizing enzymes. One incorporates a reactive chloromethylphosphonate function replacing the phosphate group of PEP. The second contains a chloromethyl group substituting for the carboxylate function of PEP. An improved procedure for the preparation of the known (Z)- and (E)-3-chloro-PEP is also given. The isomers were obtained as a 4 : 1 mixture, resolved by anion-exchange chromatography after the last reaction step. The stereochemistry of the two isomers was unequivocally assigned from the (3)J(H-C) coupling constants between the carboxylate carbons and the vinyl protons. All of these and other known PEP-analogues were tested as reversible and irreversible inhibitors of Mg2+- and Mn2+- activated PEP-utilizing enzymes: enzyme I of the phosphoenolpyruvate:sugar phosphotransferase system (PTS), pyruvate kinase, PEP carboxylase and enolase. Without exception, the most potent inhibitors were those with substitution of a vinyl proton. Modification of the phosphate and the carboxylate groups resulted in less effective compounds. Enzyme I was the least tolerant to such modifications. Among the carboxylate-modified analogues, only those replaced by a negatively charged group inhibited pyruvate kinase and enolase. Remarkably, the activity of PEP carboxylase was stimulated by derivatives with neutral groups at this position in the presence of Mg2+, but not with Mn2+. For the irreversible inhibition of these enzymes, (Z)-3-Cl-PEP was found to be a very fast-acting and efficient suicide inhibitor of enzyme I (t(1/2) = 0.7 min).