Electrochemical genosensors for biomedical applications based on gold nanoparticles

Two gold nanoparticles-based genomagnetic sensors designs for detection of DNA hybridization are described. Both assays are based on a magnetically induced direct electrochemical detection of gold tags on magnetic graphite-epoxy composite electrodes. The first design is a two strands assay format that consists of the hybridization between a capture DNA strand which is linked with paramagnetic beads and another DNA strand related to BRCA1 breast cancer gene used as a target which is coupled with streptavidin-gold nanoparticles. The second genomagnetic sensor design is a sandwich assay format with more application possibilities. A cystic fibrosis related DNA strand is used as a target and sandwiched between two complementary DNA probes: the first one linked with paramagnetic beads and a second one modified with gold nanoparticles via biotin-streptavidin complexation reactions. The electrochemical detection of gold nanoparticles by differential pulse voltammetry was performed in both cases. The developed genomagnetic sensors provide a reliable discrimination against noncomplementary DNA as well against one and three-base mismatches. Optimization parameters affecting the hybridization and analytical performance of the developed genosensors are shown for genomagnetic assays of DNA sequences related with the breast cancer and cystic fibrosis genes.     

Sensitive and isothermal electrochemiluminescence gene-sensing of Listeria monocytogenes with hyperbranching rolling circle amplification technology

Listeria monocytogenes (L. monocytogenes) is one of the most problematic human pathogens, as it is mainly transmitted through the food chain and cause listeriosis. Thus, specific and sensitive detection of L. monocytogenes is required to ensure food safety. In this study, we proposed a method using hyperbranching rolling circle amplification (HRCA) combined with magnetic beads based electrochemiluminescence (ECL) to offer an isothermal, highly sensitive and specific assay for the detection of L. monocytogenes. At first, a linear padlock probe was designed to target a specific sequence in the hly gene which is specific to L. monocytogenes and then ligated by Taq DNA ligase. After ligation and digestion, further amplification by HRCA with a biotiny labeled primer and a tris (bipyridine) ruthenium (TBR) labeled primer was performed. The resulting HRCA products were then captured onto streptavidin-coated paramagnetic beads and were analyzed by magnetic beads based ECL platform to confirm the presence of targets. Through this approach, as low as 10 aM synthetic hly gene targets and about 0.0002 ng/μl of genomic DNA from L. monocytogenes can be detected, the ability to detect at such ultratrace levels could be attributed to the powerful amplification of HRCA and the high sensitivity of current magnetic bead based ECL detection platform.     

Electrochemical magneto immunosensing of antibiotic residues in milk

A novel electrochemical immunosensing strategy for the detection of sulfonamide antibiotics in milk based on magnetic beads is presented. Among the different strategies for immobilizing the class-specific anti-sulfonamide antibody to the magnetic beads--such as those based on the use of Protein A or carboxylate modified magnetic beads - ,the best strategy was found to be the covalent bonding on tosyl-activated magnetic beads. The immunological reaction for the detection of sulfonamide antibiotics performed on the magnetic bead is based on a direct competitive assay using a tracer with HRP peroxidase for the enzymatic labelling. After the immunochemical reactions, the modified magnetic beads can be easily captured by a magneto sensor made of graphite-epoxy composite (m-GEC), which is also used as the transducer for the electrochemical immunosensing. The electrochemical detection is thus achieved through a suitable substrate for the enzyme HRP and an electrochemical mediator. The electrochemical approach is also compared with a novel magneto-ELISA with optical detection. The performance of the electrochemical immunosensing strategy based on magnetic beads was successfully evaluated using spiked milk samples, and the detection limit was found to be 1.44 microg L(-1) (5.92 nmol L(-1)) for raw full cream milk. This strategy offers great promise for rapid, simple, cost-effective and on-site analysis of biological, food and environmental samples.     

Nano-magnetic primer based electrochemiluminescence-polymerase chain reaction (NMPE-PCR) assay

Here we have developed a novel nano-magnetic primer based electrochemiluminescence-polymerase chain reaction (NMPE-PCR) strategy for detection of genome. The key idea of this method is integrating the two in situ processes: PCR on the surface of magnetic nanoparticles (MNPs) and magnetic beads based ECL readout platform, to avoid some laborious manual operations and achieve rapid yet sensitive detection. At first, the approach employs a pair of functional primers for amplification: one is tris-(2,2'-bipyridyl) ruthenium (TBR) labeled primer; the other one is nano-magnetic primer which is prepared by attaching the primer to the surfaces of MNPs. With the presence of DNA analyte and PCR mixture, the TBR labeled products are directly loaded and enriched on the surface of MNPs during PCR cycling. Then the MNPs-TBR complexes can be analyzed by a magnetic ECL platform without any post-modification or post-incubation. Finally, we used Listeria monocytogenes as the target to examine these desirable properties of this assay, reaching a detection limit of 500 fg/μL for genome in 1 h. The proposed study has provided the evidence as a proof-of-concept, thus having potential for development of automatic mode for detection of specific gene.     

Highly sensitive and selective colorimetric genotyping of single-nucleotide polymorphisms based on enzyme-amplified ligation on magnetic beads

Herein we report a new strategy for highly sensitive and selective colorimatric assay for genotyping of single-nucleotide polymorphisms (SNPs). It is based on the use of a specific gap ligation reaction, horseradish peroxidase (HRP) for signal amplification, and magnetic beads for the easy separation of the ligated product. Briefly, oligonucleotide capture probe functionalized magnetic beads are first hybridized to a target DNA. Biotinylated oligonucleotide detection probes are then allowed to hybridize to the already captured target DNA. A subsequent ligation at the mutation point joins the two probes together. The introduction of streptavidin-conjugated HRP and a simple magnetic separation allow colorimetric genotyping of SNPs. The assay is able to discriminate one copy of mutant in 1000 copies of wild-type KRAS oncogene at 30 picomolar. The detection limit of the assay is further improved to 1 femtomolar by incorporating a ligation chain reaction amplification step, offering an excellent opportunity for the development of a simple and highly sensitive diagnostic tool.     

A TaqMan PCR Method for Routine Diagnosis of the Quarantine Fungus Guignardia citricarpa on Citrus Fruit

With respect to disease risk for the quarantine fungus Guignardia citricarpa on citrus fruit an accurate diagnosis for routine analysis is required. Also, when inspections have to be performed on imported citrus fruits, a fast detection method is urgently needed. A fast automated DNA extraction method based on magnetic beads combined with a real‐time PCR assay was optimized to improve and advance the routine diagnosis of citrus black spot disease. Real‐time PCR was used for detection of the pathogen G. citricarpa in planta. A specific primer/TaqMan probe combination that discriminates between G. citricarpa and the harmless citrus endophyte Guignardia mangiferae, was designed based on the internal transcribed spacer region of the multi‐copy rDNA gene. Co‐amplification of target DNA along with an internal competitor DNA fragment made the diagnostic assay more reliable to check for false negatives. The real‐time PCR was specific, since no cross reaction was observed with a series of citrus pathogens and related species. The diagnostic assay was performed on lesions dissected from imported diseased oranges. Comparison between the conventional PCR and the real‐time PCR methods showed that the TaqMan method was more sensitive.     

Towards Q-PCR of pathogenic bacteria with improved electrochemical double-tagged genosensing detection

A very sensitive assay for the rapid detection of pathogenic bacteria based on electrochemical genosensing has been designed. The assay was performed by the PCR specific amplification of the eaeA gene, related with the pathogenic activity of Escherichia coli O157:H7. The efficiency and selectivity of the selected primers were firstly studied by using standard Quantitative PCR (Q-PCR) based on TaqMan fluorescent strategy. The bacteria amplicon was detected by using two different electrochemical genosensing strategies, a highly selective biosensor based on a bulk-modified avidin biocomposite (Av-GEB) and a highly sensitive magneto sensor (m-GEC). The electrochemical detection was achieved in both cases by the enzyme marker HRP. The assay showed to be very sensitive, being able to detect 4.5 ng microl(-1) and 0.45 ng microl(-1) of the original bacterial genome after only 10 cycles of PCR amplification, when the first and the second strategies were used, respectively. Moreover, the electrochemical strategies for the detection of the amplicon showed to be more sensitive compared with Q-PCR strategies based on fluorescent labels such as TaqMan probes.     

Switch on or switch off: an optical DNA sensor based on poly(p-phenylenevinylene) grafted magnetic beads

There has been an enormous demand for commercial label-free DNA sensors in a diverse range of fields including pre-emptive medicine, diagnostics, environmental monitoring, and food industry. Addressing the need for sensitive, selective and facile DNA sensors, we demonstrate a novel switch on/off sensor design that utilizes sandwich hybridization between photoluminescent anionic conjugated polyelectrolyte (CPE) bound captureprobe coated onto magnetic beads, target and the signaling probe. The hybridization-readout in our sensor was monitored by either fluorescence resonance energy transfer (FRET, switch-on) or superquenching (switch-off) depending on the type of signaling probe used. Moreover recent designs that utilize beads for sensing DNA have been limited towards using electrostatic interactions or intercalation of dyes to observe FRET. To our knowledge this is the first report of a switch on/off sensor utilizing either FRET or superquenching thus providing flexibility for future development of such rapid, facile and sensitive DNA sensors. The FRET-based sensor was investigated by optimizing the reaction parameters and selectivity. A low detection limit of 240 fmol in 2 mL of SSC buffer was achieved.     

Electrochemical strategy for sensing protein phosphorylation

We herein report a novel electrochemical method in this paper to monitor protein phosphorylation and to assay protein kinase activity based on Zr(4+) mediated signal transition and rolling circle amplification (RCA). First, substrate peptide immobilized on a gold electrode can be phosphorylated by protein kinase A. Then, Zr(4+) links phosphorylated peptide and DNA primer probe by interacting with the phosphate groups. After the introduction of the padlock probe and phi29 DNA polymerase, RCA is achieved on the surface of the electrode. As the RCA product, a very long DNA strand, may absorb a large number of electrochemical speices, [Ru(NH(3))(6)](3+), via the electrostatic interaction, localizing them onto the electrode surface, initiated by protein kinase A, a sensitive electrochemical method to assay the enzyme activity is proposed. The detection limit of the method is as low as 0.5 unit/mL, which might promise this method as a good candidate for monitoring phosphorylation in the future.     

Solid-phase time-resolved fluorescence detection of human immunodeficiency virus polymerase chain reaction amplification products.

A new assay system for the detection of polymerase chain reaction (PCR) amplification products is presented. This single-pot sandwich assay system employs solid-support oligonucleotide-coated capture beads, a rare earth metal chelate-labeled probe, and a time-resolved fluorescence detection. The new assay system was evaluated for various reaction conditions including, DNA denaturation time, hybridization salt concentration, probe concentration, and hybridization time, all of which are important in designing an assay with a high level of sensitivity for the detection of duplex DNA. This nonisotopic assay system was applied to the detection of purified human immunodeficiency virus (HIV) DNA and sensitivity was compared with agarose gel electrophoresis and slot blot hybridization using a 32P-labeled probe. We were able to detect the amplified product from one copy of HIV DNA after 35 cycles of PCR amplification in less than 30 min using this assay, which compared with one copy by gel electrophoresis after 40 cycles of PCR amplification and one copy by slot blot hybridization after 35 cycles of PCR amplification and an overnight exposure of the autoradiogram. Thus, this assay is rapid, sensitive, and easy to use.     

Electrochemical sandwich assay for attomole analysis of DNA and RNA from beer spoilage bacteria Lactobacillus brevis

Attomole (10(-18)mol) levels of RNA and DNA isolated from beer spoilage bacterial cells Lactobacillus brevis have been detected by the electrochemical sandwich DNA hybridization assay exploiting enzymatic activity of lipase. DNA sequences specific exclusively to L. brevis DNA and RNA were selected and used for probe and target DNA design. The assay employs magnetic beads (MB) modified with a capture DNA sequence and a reporter DNA probe labeled with the enzyme, both made to be highly specific for L. brevis DNA. Lipase-labeled DNAs captured on MBs in the sandwich assay were collected on gold electrodes modified with a ferrocene (Fc)-terminated SAM formed by aliphatic esters. Lipase hydrolysis of the ester bond released a fraction of the Fc redox active groups from the electrode surface, decreasing the electrochemical signal from the surface-confined Fc. The assay, shown to be efficient for analysis of short synthetic DNA sequences, was ineffective with genomic double stranded bacterial DNA, but it allowed down to 16 amole detection of 1563 nts long RNA, isolated from bacterial ribosomes without the need for PCR amplification, and single DNA strands produced from ribosomal RNA. No interference from E. coli RNA was registered. The assay allowed analysis of 400 L. brevis cells isolated from 1L of beer, which fits the "alarm signal" range (from 1 to 100 cells per 100mL).     

Microscale detection of specific bacterial DNA in soil with a magnetic capture-hybridization and PCR amplification assay.

A magnetic capture-hybridization PCR technique (MCH-PCR) was developed to eliminate the inhibitory effect of humic acids and other contaminants in PCRs targeting specific soil DNA. A single-stranded DNA probe, which was complementary to an internal part of the target gene, was used to coat magnetic beads. After hybridization in a suspension of soil DNA, magnetic extraction of the beads separated the hybrid DNA from all other soil DNA, humic acids, and other interfering soil components. The MCH was followed by PCR amplification of the specific target DNA. In barley rhizosphere soil, detection of a lux gene inserted in a Pseudomonas fluorescens strain could be demonstrated in nonsterile soil samples (0.5 mg). This corresponded to a detection of fewer than 40 bacterial cells per cm of barley root. The MCH-PCR technique greatly improves the current protocols for PCR detection of specific microorganisms or genes in soil because specific target DNA sequences from very small soil samples can be extracted and determined.     

Cocaine detection via rolling circle amplification of short DNA strand separated by magnetic beads

A novel and sensitive fluorescence biosensor based on aptamer and rolling circle amplification for the determination of cocaine was developed in the present work. Here cocaine aptamers immobilized onto Au nanoparticles modified magnetic beads hybridized with short DNA strand. In the presence of cocaine, the short DNA strand was displaced from aptamer owing to cocaine specially binding with aptamer. Next, the short DNA strand was separated by magnetic beads and used to originate rolling circle amplification as primer. The end products of rolling circle amplification were detected by fluorescence signal generation upon molecular beacons hybridizing with the end products of rolling circle amplification. With rolling circle amplification and the separation by magnetic beads reducing the background signal, the new strategy was suitable for the detection of as low as 0.48 nM cocaine. Compared with reported cocaine sensors, our method exhibited excellent sensitivity. Our new strategy may provide a platform for numerous proteins and low molecular weight analytes to highly sensitively detect by DNA amplification.     

Detecting nucleic acid fragments in serum using a magnetically modulated sandwich assay

We present a novel assay for rapid and highly sensitive detection of specific nucleic acid fragments in human serum. In a magnetic modulation biosensing (MMB) system, magnetic beads and fluorescently labeled probes are attached to the target analyte and form a “sandwich” complex. An alternating external magnetic field gradient condenses the magnetic beads (and hence the target molecules with the fluorescently labeled probes) to the detection volume and sets them in a periodic motion, in and out of a laser beam. A synchronous detection enables the removal of background signal from the oscillating target signal without complicated sample preparation. The high sensitivity of the MMB system, combined with the specificity of a sandwich hybridization assay, enables detection of DNA fragments without enzymatic signal amplification. Here, we demonstrate the sensitivity of the assay by directly detecting the EML4‐ALK oncogenic translocation sequence spiked in human serum. The calculated limit of detection is 1.4 pM, which is approximately 150 times better than a conventional plate reader. In general, the MMB‐assisted SHA can be implemented in many other applications for which enzymatic amplification, such as PCR, is not applicable and where rapid detection of specific nucleic acid targets is required.     

A comparative study of PCR product detection and quantitation by electrochemiluminescence and fluorescence

Amplification and detection of target DNA sequences are made possible in a polymerase chain reaction (PCR) by using a mixture of biotinylated and ruthenium(II) trisbipyridal (Ru(bpy)₃²⁺)-end-labelled primers. In this way, biotin for capture and Ru(bpy)₃²⁺ for detection are directly incorporated into the PCR product obviating subsequent probe hybridization. PCR of a bacterial DNA template from Alteromonas species strain JD6.5 using a cocktail of biotin- and Ru(bpy)₃²⁺-labelled primers amplified a 1 kilobase region. Serial dilution of PCR product followed by magnetic separation with Streptavidin (SA)-coated magnetic beads and an electrochemiluminescence (ECL) assay using the semi-automated QPCR System 5000 demonstrated sensitive (pg range) DNA detection. ECL assay of probe hybridization to a human immunodeficiency virus (HIV) sequence also produced pg level sensitivity. Quantitative DNA determination by ECL assay correlated well with visual detection of DNA in electrophoretic gels. However, DNA detection by ECL assay was 10 to 100 times more sensitive than conventional ethidium bromide staining. The combination of DNA-based magnetic separation with ECL assay provides a very sensitive and rapid method of quantitating DNA which, owing to its rapid and facile nature, may have many applications in the research, environmental monitoring, industrial and clinical fields.     

A one-step electrochemical method for DNA detection that utilizes a peroxidase-mimicking DNAzyme amplified through PCR of target DNA

A novel one-step electrochemical method for DNA detection is described. The procedure utilizes a reaction catalyzed by a peroxidase-mimicking DNAzyme to produce a product, which forms an insoluble precipitation layer on the surface of an electrode. A rationally designed forward primer, conjugated with a peroxidase DNAzyme complementary sequence at its 5′-end, is used for PCR amplification of target DNA. As a result, the DNAzyme sequence is produced by amplification only when the target DNA is present in the sample. The PCR product is then subjected to the precipitation reaction on the electrode surface using an electrolyte assay buffer containing 4-chloronaphthol, hydrogen peroxide, ferrocenemethanol, hemin, and 5′-lambdaexonuclease. Finally, analysis is carried out using Faradaic impedance spectroscopy. The impedance value was found to greatly increase when target DNA is present owing to the formation of a precipitation layer on the electrode surface caused by the catalytic action of the DNAzyme. In contrast, no impedance increase is observed when a control sample not containing target DNA is utilized. By employing this strategy, target DNA from Chlamydia trachomatis was reliably detected within a 10 min period following precipitation without the need for complicated secondary procedures. This effort has led to the development of a highly convenient electrochemical one-step method for DNA detection that utilizes a peroxidase-mimicking DNAzyme, which is specifically designed to undergo amplification during PCR of target DNA.     

Detection of rare DNA targets by isothermal ramification amplification.

We described previously a novel DNA amplification technique, termed ramification amplification (RAM) (Zhang et al., Gene 211 (1998) 277). This method was designed to utilize a circular probe (C-probe) that is covalently linked by a DNA ligase when it hybridizes to a target. Then, a DNA polymerase extends the bound forward primer along the C-probe and continuously displaces a downstream strand, generating a multimeric single-stranded DNA (ssDNA), analogous to in vivo 'rolling circle' replication of bacteriophage. This multimeric ssDNA then serves as a template for multiple reverse primers to hybridize, extend, and displace downstream DNA, generating a large ramified (branching) DNA complex, and resulting in an exponential amplification. Previously, we were able to achieve a significant amplification using phi29 DNA polymerase that has a high processivity and strong displacement activity. However, due to the intrinsic limitations of the polymerase, we only achieved a sensitivity of 10,000 target molecules, which is insufficient for most practical uses. Therefore, we tested several DNA polymerases and found that exo(-) Bst DNA polymerase meets the requirement for high sensitivity. By further improving the assay condition and format, we are able to detect fewer than ten targets in 1 h and to apply successfully this method for detection of Epstein-Barr virus in human lymphoma specimens.     

Polymerase chain reaction for the rapid identification of Clostridium botulinum type A strains and detection in food samples

A polymerase chain reaction (PCR) was developed for the detection of Clostridium botulinum type A, a cause of human botulism. A two primer set and an oligonucleotide detection probe were used to specifically detect Cl. botulinum type A neurotoxin gene (BoNT/A). After 40 cycles of amplification, detection of a 798 bp amplified DNA fragment was carried out by agarose gel electrophoresis and Southern blot hybridization. This assay was able to detect 12.5 fg of purified target DNA or five bacteria per reaction. The sensitivity in artificially contaminated food samples after an 18 h enrichment step ranges from 10 to 10³ bacteria per g according to the type of food samples. No cross-reactions were observed with the other Cl. botulinum toxinotypes and other bacteria found routinely in food. This PCR method may provide a suitable and rapid alternative to standard techniques for detection of Cl. botulinum type A in food samples.