Transesterification of phosphatidylcholine in <Emphasis Type="Italic">sn</Emphasis>-1 position through direct use of lipase-producing <Emphasis Type="Italic">Rhizopus oryzae</Emphasis> cells as whole-cell biocatalyst

The enzymatic process presents an advantage of producing specified phospholipids that rarely exist in nature. In this study, we investigated the regiospecific modification of phosphatidylcholine (PC) in the sn-1 position using immobilized Rhizopus oryzae. In a reaction mixture containing egg yolk PC and exogenous lauric acid (LA) in n-hexane, lipase-producing R. oryzae cells immobilized within biomass support particles (BSPs) showed a much higher transesterification activity than lipase powders. To improve the product yield, several parameters including substrate ratio and reaction time were investigated, resulting in the incorporation of 44.2% LA into the product PC after a 48-h reaction. The analysis of the molecular structure showed that a large proportion of exogenous LA (>90%) was incorporated in the sn-1 position of the enzymatically modified PC. Moreover, the BSP-immobilized R. oryzae maintained its activity for more than 12 batch cycles. The presented results, therefore, suggest the applicability of BSP-immobilized R. oryzae as a whole-cell biocatalyst for the regiospecific modification of phospholipids.     

Enantioselective transesterification using immobilized <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> overexpressing lipase

In the present study, we used gene manipulation to construct a recombinant Aspergillus oryzae strain overexpressing lipase and investigated its application to the optical resolution of chiral compounds. A. oryzae niaD300, which was derived from the wild-type strain RIB40, was used as the host strain. The tglA gene, which encodes a triacylglycerol lipase, was cloned from the A. oryzae niaD300 chromosomal genome, then reintroduced, with and without a secretion-signal sequence, into the genome and expressed under the control of the improved glaA promoter of plasmid pNGA142. The resulting recombinant strain overexpressing A. oryzae lipase was immobilized within biomass-support particles and used as a whole-cell biocatalyst. The immobilized lipase-overexpressing strain with secretion-signal sequence showed high activity and was used to selectively synthesize (R)-1-phenylethyl acetate from (RS)-1-phenylethanol and vinyl acetate. After 48 h reaction at 30°C with molecular sieve 4A, the yield and enantiomeric excess (%ee) of (R)-1-phenylethyl acetate reached approximately 90 and 95%ee, respectively. The whole-cell biocatalyst for optical resolution of chiral compounds produced in this study maintained its activity over 25 batch-reaction cycles.     

Production of ascorbic acid glucoside by alginate-entrapped mycelia of <Emphasis Type="Italic">Aspergillus niger</Emphasis>

The mycelia of Aspergillus niger, cultivated in a medium containing 45 g l⁻¹ maltose, 66 g l⁻¹ yeast extract, and 5 g l⁻¹ K₂HPO₄ at 30°C and 200 rpm, were used as a biocatalyst in the glucosylation of ascorbic acid. Free mycelia from 3-day-old culture, when used in a 6-h reaction with maltose as the acyl donor, gave 16.07 g l⁻¹ ascorbic acid glucoside corresponding to a volumetric productivity of 2.68 g l⁻¹ h⁻¹ and a conversion of 67%. Mycelia from 3-day-old cultures were entrapped in calcium alginate beads and used as a catalyst in the glucosylation of ascorbic acid. An ascorbic acid-to-maltose molar ratio of 1:9 was found to be optimum, and the conversion reached 75% after 12 h. The concentration of ascorbic acid glucoside produced at this molar ratio was 17.95 g l⁻¹, and the productivity was 1.5 g l⁻¹ h⁻¹. The biocatalyst was repeatedly used in a fixed bed bioreactor for the synthesis of ascorbic acid glucoside and approximately 17 g l⁻¹ of ascorbic acid glucoside corresponding to a volumetric productivity of 1.42 g l⁻¹ h⁻¹ was produced in each use. The conversion was retained at 70% in each use. The entrapped mycelia also exhibited exceptionally high reusability and storage stability. The product was purified to 85% by anion exchange and gel permeation chromatography with a final yield of 75%.     

Production of fructose from inulin using mixed inulinases from <Emphasis Type="Italic">Aspergillus niger</Emphasis> and <Emphasis Type="Italic">Candida guilliermondii</Emphasis>

Two new effective microbial producers of inulinases were isolated from Jerusalem artichoke tubers grown in Thailand and identified as Aspergillus niger TISTR 3570 and Candida guilliermondii TISTR 5844. The inulinases produced by both these microorganisms were appropriate for hydrolysing inulin to fructose as the principal product. An initial inulin concentration of ∼100 g l⁻¹ and the enzyme concentration of 0.2 U g⁻¹ of substrate, yielded 37.5 g l⁻¹ of fructose in 20 h at 40°C when A. niger TISTR 3570 inulinase was the biocatalyst. The yield of fructose on inulin was 0.39 g g⁻¹. Under identical conditions, the yeast inulinase afforded 35.3 g l⁻¹ of fructose in 25 h. The fructose yield was 0.35 g g⁻¹ of substrate. The fructose productivities were 1.9 g l⁻¹ h⁻¹ and 1.4 g l⁻¹ h⁻¹ for the mold and yeast enzymes, respectively. After 20 h of reaction, the mold enzyme hydrolysate contained 53% fructose and more than 41% of initial inulin had been hydrolysed. Using the yeast enzymes, the hydrolysate contained nearly 38% fructose at 25 h and nearly 36% of initial inulin had been hydrolysed. The A. niger TISTR 3570 inulinases exhibited both endo-inulinase and exo-inulinase activities. In contrast, the yeast inulinases displayed mainly exo-inulinase activity. The mold and yeast crude inulinases mixed in the activity ratio of 5:1 proved superior to individual crude inulinases in hydrolysing inulin to fructose. The enzyme mixture provided a better combination of endo- and exo-inulinase activities than did the crude extracts of either the mold or the yeast individually.     

<Emphasis Type="Italic">In vitro</Emphasis> flowering of <Emphasis Type="Italic">Perilla frutescens</Emphasis>

This study investigated the factors affecting in vitro flowering of Perilla frutescens. The shoots regenerated from cotyledonary and hypocotyl explants cultured on Murashige and Skoog (MS) medium supplemented with benzyladenine (BA) and indole-3-acetic acid, each at 0.5 mg l⁻¹, were excised and transferred to MS medium containing 30 g l⁻¹ of sucrose, 8.25 g l⁻¹ of ammonium nitrate, and 1.0 mg l⁻¹ of BA. After 40 d of culture, 86.2% of shoots flowered and most of which self-fertilized in vitro and produced mature fruits with viable seeds. These seeds were germinated and plants were grown to maturity and flowered in soil under greenhouse conditions. The in vitro flowering system reported in this study may facilitate rapid breeding of P. frutescens and offers a model system for studying the physiological mechanism of flowering.     

Scale-up fermentation of recombinant <Emphasis Type="Italic">Candida rugosa</Emphasis> lipase expressed in <Emphasis Type="Italic">Pichia pastoris</Emphasis> using the GAP promoter

The high-cell-density fermentation of Candida rugosa lipase in the constitutive Pichia pastoris expression system was scaled up from 5 to 800 l in series by optimizing the fermentation conditions at both lab scale and pilot scale. The exponential feeding combined with pH-stat strategy succeeded in small scale studies, while a two-stage fermentation strategy, which shifted at 48 h by fine tuning the culture temperature and pH, was assessed effective in pilot-scale fermentation. The two-stage strategy made an excellent balance between the expression of heterogeneous protein and the growth of host cells, controlling the fermentation at a relatively low cell growth rate for the constitutive yeast expression system to accumulate high-level product. A stable lipase activity of approximately 14,000 IU ml⁻¹ and a cell wet weight of ca. 500 g l⁻¹ at the 800-l scale were obtained. The efficient and convenient techniques suggested in this study might facilitate further scale-up for industrial lipase production.     

Quantitative Structure-Activity Relationships for the Pre-Steady State of <Emphasis Type="Italic">Pseudomonas Species</Emphasis> Lipase Inhibitions by <Emphasis Type="Italic">p</Emphasis>-Nirophenyl-<Emphasis Type="Italic">N</Emphasis>-Substituted Carbamates

The pre-steady states of Pseudomonas species lipase inhibitions by p-nitrophenyl-N-substituted carbamates (1–6) are composed of two steps: (1) formation of the non-covalent enzyme–inhibitor complex (E:I) from the inhibitor and the enzyme and (2) formation of the tetrahedral enzyme–inhibitor adduct (E–I) from the E:I complex. From a stopped-flow apparatus, the dissociation constant for the E:I complex, K_S, and the rate constant for formation of the tetrahedral E–I adduct from the E:I complex, k₂ are obtained from the non-linear least-squares of curve fittings of first-order rate constant (k_obs) versus inhibition concentration ([I]) plot against k_obs=k₂+k₂[I]/(K_S+[I]). Values of pK_S, and log k₂ are linearly correlated with the σ^* values with the ρ^* values of −2.0 and 0.36, respectively. Therefore, the E:I complexes are more positive charges than the inhibitors due to the ρ^* value of −2.0. The tetrahedral E–I adducts on the other hand are more negative charges than the E:I complexes due to the ρ^* value of 0.36. Formation of the E:I complex from the inhibitor and the enzyme are further divided into two steps: (1) the pre-equilibrium protonation of the inhibitor and (2) formation of the E:I complex from the protonated inhibitor and the enzyme.     

Stimulation of saponin production in <Emphasis Type="Italic">Panax ginseng</Emphasis> hairy roots by two oligosaccharides from <Emphasis Type="Italic">Paris polyphylla</Emphasis> var. <Emphasis Type="Italic">yunnanensis</Emphasis>

Two oligosaccharides, a heptasaccharide (HS) and an octasaccharide (OS), isolated from Paris polyphylla var. yunnanensis, stimulated the growth and saponin accumulation of Panax ginseng hairy roots at 5–30 mg l⁻¹. HS and OS at 30 mg l⁻¹, fed separately to hairy root cultures at 10 days post-inoculation, increased the root biomass dry weight by more than 70% to ∼20 g l⁻¹ from 13 g l⁻¹ and the total saponin content of roots by more than 1-fold to ∼3.5% from 1.6% (w/w). The results suggest that the two oligosaccharides may have plant growth-regulatory activity in plant tissue cultures.     

Gene analysis,optimized production and property of marine lipase from <Emphasis Type="Italic">Bacillus pumilus</Emphasis> B106 associated with South China Sea sponge <Emphasis Type="Italic">Halichondria rugosa</Emphasis>

Gene cloning, optimized production and property of marine lipase from Bacillus pumilus B106 associated with South China Sea sponge Halichondria rugosa were investigated in this paper. A lipase gene with whole ORF encoding 215 amino acids was obtained by PCR, protein domain prediction suggested that the deduced lipase belongs to α/β hydrolases family. Based on single factor Seriatim-Factorial test and Plackett–Burman experimental design, the optimal medium consisted of (per l) 12.5 ml maize oil, 5.0 g beef extract, 2.0 g PO₄ ³⁻ (0.6 g KH₂PO₄, 1.4 g K₂HPO₄), 17.15 g Mg²⁺, 5.0 g yeast extract, 2.282 g CaCl₂ and 5.0 ml Tween80 with artificial sea water. Using this optimum medium, lipase activity and cell concentration were increased by 3.54- and 1.31-fold over that of the basal medium, respectively. This lipase showed tolerance to high salinity, pH and temperature. About 10–20% methanol exhibited a stimulatory effect on the lipase activity, while activity was inhibited by 30–40% methanol, 2-propanol, DMSO, and ethanol. This study provides a valuable resource for marine lipase production and extends our understanding of the possible role of sponge-associated bacteria in the biotransformation of chemical compounds for the sponge host.     

High-resolution mapping and gene prediction of <Emphasis Type="Italic">Xanthomonas Oryzae</Emphasis> pv. <Emphasis Type="Italic">Oryzae</Emphasis> resistance gene <Emphasis Type="Italic">Xa7</Emphasis>

Bacterial blight (BB) caused by Xanthomonas oryzae pv. oryzae (Xoo) is a devastating disease in rice worldwide. The resistance gene Xa7, which provides dominant resistance against the pathogen with avirulence (Avr) gene AvrXa7, has proved to be durably resistant to BB. A set of SSR markers were selected from the “gramene” database based on the Xa7 gene initial mapping region on chromosome 6. These markers were used to construct a high-resolution genetic map of the chromosomal region surrounding the Xa7 gene. An F₂ mapping population with 721 highly susceptible individuals derived from a cross between the near isogenic lines (NILs) IRBB7 and IR24 were constructed to localize the Xa7 gene. In a primary analysis with eleven polymorphic SSR markers, Xa7 was located in approximately the 0.28-cM region. To walk closer to the target gene, recombinant F₂ individuals were tested using newly developed STMS (sequence tagged microsatellite) markers. Finally, the Xa7 gene was mapped to a 0.21-cM interval between the markers GDSSR02 and RM20593. The Xa7-linked markers were landed on the reference sequence of cv. Nipponbare through bioinformatics analysis. A contig map corresponding to the Xa7 gene was constructed. The target gene was assumed to span an interval of approximately 118.5-kb which contained a total of fourteen genes released by the TIGR Genome Annotation Version 5.0. Candidate-gene analysis of Xa7 revealed that the fourteen genes encode novel domains that have no amino acid sequence similar to other cloned Xa(xa) genes. Shen Chen and Zhanghui Huang are contributed equally to this work.     

Mutational analysis of the <Emphasis Type="Italic">gum</Emphasis> gene cluster required for xanthan biosynthesis in <Emphasis Type="Italic">Xanthomonas</Emphasis><Emphasis Type="Italic">oryzae</Emphasis> pv <Emphasis Type="Italic">oryzae</Emphasis>

Genome sequence analysis of Xanthomonas oryzae pv. oryzae has revealed a cluster of 12 ORFs that are closely related to the gum gene cluster of Xanthomonas campestris pv. campestris. The gum gene cluster of X. oryzae encodes proteins involved in xanthan production; however, there is little experimental evidence supporting this. In this study, biochemical analyses of xanthan produced by a defined set of X. oryzae gum mutant strains allowed us to preliminarily assign functions to most of the gum gene products: biosynthesis of the pentasaccharide repeating unit for GumD, GumM, GumH, GumK, and GumI, xanthan polymerization and transport for GumB, GumC, GumE, and GumJ, and modification of the pentasaccharide repeating unit for GumF, GumG, and GumL. In addition, we found that the exopolysaccharides are essential but not specific for the virulence of X. oryzae. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users. Sang-Yoon Kim and Jeong-Gu Kim contributed equally to this work.     

Preparation of a whole-cell biocatalyst of mutated <Emphasis Type="Italic">Candida antarctica</Emphasis> lipase B (mCALB) by a yeast molecular display system and its practical properties

To prepare a whole-cell biocatalyst of a stable lipase at a low price, mutated Candida antarctica lipase B (mCALB) constructed on the basis of the primary sequences of CALBs from C. antarctica CBS 6678 strain and from C. antarctica LF 058 strain was displayed on a yeast cell surface by α-agglutinin as the anchor protein for easy handling and stability of the enzyme. When mCALB was displayed on the yeast cell surface, it showed a preference for short chain fatty acids, an advantage for producing flavors; although when Rhizopus oryzae lipase (ROL) was displayed, the substrate specificity was for middle chain lengths. When the thermal stability of mCALB on the cell surface was compared with that of ROL on a cell surface, T _1/2, the temperature required to give a residual activity of 50% for heat treatment of 30 min, was 60°C for mCALB and 44°C for ROL indicating that mCALB displayed on cell surface has a higher thermal stability. Furthermore, the activity of the displayed mCALB against p-nitrophenyl butyrate was 25-fold higher than that of soluble CALB, as reported previously. These findings suggest that mCALB-displaying yeast is more practical for industrial use as the whole-cell biocatalyst.     

Authentic seed-specific activity of the <Emphasis Type="Italic">Perilla</Emphasis> oleosin 19 gene promoter in transgenic <Emphasis Type="Italic">Arabidopsis</Emphasis>

The Perilla (Perilla frutescens L. cv. Okdong) oleosin gene, PfOle19, produces a 19-kDa protein that is highly expressed only in seeds. The activity of the −2,015 bp 5′-upstream promoter region of this gene was investigated in transgenic Arabidopsis plants using the fusion reporter constructs of enhanced green fluorescent protein (EGFP) and β-glucuronidase (GUS). The PfOle19 promoter directs Egfp expression in developing siliques, but not in leaves, stems or roots. In the transgenic Arabidopsis, EGFP fluorescence and histochemical GUS staining were restricted to early seedlings, indehiscent siliques and mature seeds. Progressive 5′-deletions up to the −963 bp position of the PfOle19 promoter increases the spatial control of the gene expression in seeds, but reduces its quantitative levels of expression. Moreover, the activity of the PfOle19 promoter in mature seeds is 4- and 5-fold greater than that of the cauliflower mosaic virus 35S promoter in terms of both EGFP intensity and fluorometric GUS activity, respectively.     

Isolation of a Novel Lipase Gene from <Emphasis Type="Italic">Serratia liquefaciens</Emphasis> S33 DB-1, Functional Expression in <Emphasis Type="Italic">Pichia pastoris</Emphasis> and its Properties

A new lipase gene designated as SlLipA was isolated from Serratia liquefaciens S33 DB-1 by the genomic-walking method. The cloned gene contained an open reading frame (ORF) of 1,845 bp encoding 615 amino acids with a conserved GXSXG motif. Genome sequence analysis showed that an aldo/keto reductase gene closed to the SlLipA gene. The lipase gene was cloned into the expression vector pPICZαA and successfully integrated into the heterologous host, methylotrophic yeast Pichia pastoris GS115. Five transformants could be expressed as secreted recombinant proteins with the high activity on Triglyceride–Agarose plate and as candidates to produce the recombinant enzyme. A C-terminal His tag was used for its purification. The lipase activity of different transformants against substrate para-nitrophenyl laurate (p-NPL) varied from 14 to 16 U ml⁻¹. For the substrates para-nitrophenyl caprate (p-NPC), p-NPL, para-nitrophenyl myristate (p-NPM), para-nitrophenyl palmitate (p-NPP), and para-nitrophenyl stearate (p-NPS), the specific activity was shown to be preferred to long acyl chain length of p-NPS.     

Enhancement of polysaccharides production in <Emphasis Type="Italic">Ganoderma lucidum</Emphasis> by the addition of ethyl acetate extracts from <Emphasis Type="Italic">Eupolyphaga sinensis</Emphasis> and <Emphasis Type="Italic">Catharsius molossus</Emphasis>

To screen stimulators from Chinese medicinal insects for mycelial growth and polysaccharides production of Ganoderma lucidum, G. lucidum was inoculated into the media with and without supplementation of medicinal insect extracts. The ethyl acetate extract of Eupolyphaga sinensis at 55 mg l⁻¹ lead to significant increase in both biomass and intracellular polysaccharides (IPS) concentration from 8.53 ± 0.41 to 14.16 ± 0.43 and 1.28 ± 0.09 to 2.13 ± 0.11 g l⁻¹, respectively. In addition, the ethyl acetate extract of Catharsius molossus at 55 mg l⁻¹ significantly enhanced extracellular polysaccharides (EPS) production; the EPS yield increased from 350.9 ± 14.1 to 475.1 ± 15.3 mg l⁻¹. There were no new components in the two types of polysaccharides obtained by the addition of the insect extracts.     

Removal of <Emphasis Type="Italic">p</Emphasis>-chlorophenol by the marine microalga <Emphasis Type="Italic">Tetraselmis marina</Emphasis>

The ability of Tetraselmis marina, a green coastal microalga, to remove chlorophenols under photoautotrophic conditions was investigated. T.marina was able to grow in the presence of 20 mg L⁻¹ of the phenolic compounds tested. The EC₅₀ (growth rate) value of p-chlorophenol (p-CP) to T.marina was found to be 25.5 mg L⁻¹. The microalga was able to remove chlorophenols, showing higher efficiency for p-CP. The effect of photoregime and NaHCO₃ concentration on p-CP removal was investigated. Under continuous illumination with 1 g L⁻¹ NaHCO₃ initial concentration T.marina removed 65% of 20 mg L⁻¹ in a 10-day cultivation period.     

<Emphasis Type="Italic">Trichoderma harzianum</Emphasis>: a biocontrol agent against <Emphasis Type="Italic">Bipolaris oryzae</Emphasis>

Rice brown spot, caused by Bipolaris oryzae, can be a serious disease causing a considerable yield loss. Trichoderma harzianum is an effective biocontrol agent for a number of plant fungal diseases. Thus, this research was carried out to investigate the mechanisms of action by which T. harzianum antagonizes Bipolaris oryzae in vitro, and the efficacy of spray application of a spore suspension of T. harzianum for control of rice brown spot disease under field conditions. In vitro, the antagonistic behavior of T. harzianum resulted in the overgrowth of B. oryzae by T. harzianum, while the␣antifungal metabolites of T.␣harzianum completely prevented the linear growth of B. oryzae. Light and scanning electron microscope (SEM) observations showed no evidence that mycoparasitism contributed to the aggressive nature of the tested isolate of T. harzianum against B. oryzae. Under field conditions, spraying of a spore suspension of T. harzianum at 10⁸ spore ml⁻¹ significantly reduced the disease severity (DS) and disease incidence (DI) on the plant leaves, and also significantly increased the grain yield, total grain carbohydrate, and protein, and led to a significant increase in the total photosynthetic pigments (chlorophyll a and b and carotenoids) in rice leaves.     

A novel cold-adapted lipase from <Emphasis Type="Italic">Acinetobacter</Emphasis> sp. XMZ-26: gene cloning and characterisation

Acinetobacter sp. XMZ-26 (ACCC 05422) was isolated from soil samples obtained from glaciers in Xinjiang Province, China. The partial nucleotide sequence of a lipase gene was obtained by touchdown PCR using degenerate primers designed based on the conserved domains of cold-adapted lipases. Subsequently, a complete gene sequence encoding a 317 amino acid polypeptide was identified. Our novel lipase gene, lipA, was overexpressed in Escherichia coli. The recombinant protein (LipA) was purified by Ni-affinity chromatography, and then deeply characterised. The LipA resulted to hydrolyse pNP esters of fatty acids with acyl chain length from C2 to C16, and the preferred substrate was pNP octanoate showing a k _cat = 560.52 ± 28.32 s⁻¹, K _m = 0.075 ± 0.008 mM, and a k _cat/K _m = 7,377.29 ± 118.88 s⁻¹ mM⁻¹. Maximal LipA activity was observed at a temperature of 15°C and pH 10.0 using pNP decanoate as substrate. That LipA peaked at such a low temperature and remained most activity between 5°C and 35°C indicated that it was a cold-adapted enzyme. Remarkably, this lipase retained much of its activity in the presence of commercial detergents and organic solvents, including Ninol, Triton X-100, methanol, PEG-600, and DMSO. This cold-adapted lipase may find applications in the detergent industry and organic synthesis.     

Stability of lipase immobilized on <Emphasis Type="Italic">O</Emphasis>-pentynyl dextran

O-Pentynyl dextran (PyD), an amphiphilic polysaccharide derivative with a degree of substitution (DS) of 0.43 was compared with ion exchange resins Lewatit VP OC 1600, Amberlite XAD 761 and Duolite A568 for immobilization of Lipase from Rhizopus arrhizus by adsorption method. The immobilized enzymes were employed for esterification of octanoic acid with geraniol in n-hexane as model reaction. PyD showed higher lipase adsorption and with 249 μmol min⁻¹ g⁻¹ significant higher esterification activity than the other supports (67–83 μmol min⁻¹ g⁻¹). Biocatalysts from all types of supports except PyD became completely inactive within 8 weeks storing at −10 °C while lipase immobilized on PyD retained its full esterification activity for at least 14 weeks. In repeated use, yield decreased rapidly after two cycles for all supports except for PyD. For this biopolymeric support, constantly 90% yield was achieved even after eight cycles, when the biocatalyst was washed with n-hexane and water and then freeze-dried. To achieve this yield, prolonged reaction times were required, partly on the account of an increasing delay period, probably to adapt active conformation, until the reaction starts.