Implant prosthetic rehabilitation of the patients with mandibular resection following oral malignoma surgery

Patient underwent mandibular resection due to surgical therapy of oropharingeal malignoma. Facial asymmetry and cosmetic distortion are frequent consequences of such interventions, which may also include deviation and intrusion of the mandible, motor and sensory disorders, abnormal intermaxillary relations and malocclusion. Implant-supported prosthesis could be an optimal solution to prosthodontic treatment of such patients. However, there is a problem in determination of stable (interocclusal) intermaxillary relations. This article describes the choice of therapy and procedures undertaken in prosthetic rehabilitation of a patient who underwent mandibular resection and radiotherapy with supported prosthesis retained with four implants.     

标尺模板在Branemark种植修复中的制作和应用

目的:制作并观察标尺模板在指导Branemark种植手术,提高手术安全性方面的作用。方法:选择15例患者52颗种植体,铸造制作标尺模板后戴入口腔拍摄曲面体层片。根据影象所显示的适宜种植区域与颏孔、上颌窦等颌骨重要解剖结构的位置,结合上部修复设计选择Branemark种植体数量与植入点,并借助标尺模板的定位网格予以记录。手术时将标尺模板戴入口腔,根据记录结果在颌骨表面显示种植体入点与颌骨重要解剖结构的位置,指导手术进行。术后戴入标尺模板拍摄对照片,判断种植体与预定位置的吻合性。结果:52颗种植体中,除1颗种植体因术中临时改变种植位置,其余51颗种植入位置均与术前计划一致。结论:在Branemark种植修复中制作并应用标尺模板,能方便直观地帮助术者将种植体植入预定位置,避免损伤颏孔等颌骨重要解剖结构,提高了手术的正确性与安全性。     

Maxillary reconstruction with a fibula osteoseptocutaneous free flap and simultaneous insertion of osseointegrated dental implants

The fibula osteoseptocutaneous flap is a good option for reconstruction of three-dimensional composite maxillary defects. This flap provides both bone and soft-tissue reconstruction and allows osseointegrated dental implantation, either simultaneously or in a second-stage procedure. Simultaneous placement of osseointegrated dental implants reduces operative sessions and allows faster oral rehabilitation for properly selected patients. The defects may result from trauma or resection of benign tumors or low-grade malignancies. Between August of 1999 and July of 2001, three patients underwent maxillary reconstruction with the fibula osteoseptocutaneous flap and simultaneous osseointegrated dental implants. The cause of the defect was trauma in two cases and resection of an adenoid cystic carcinoma in the other. The mean length of the fibula used for bony reconstruction was 4.7 cm. One osteotomy was performed in one case and no osteotomy was necessary in the other two. Skin islands of 8 x 2.5 cm and 16 x 3.5 cm were used for two patients. For the other patient, a double skin island was used for both nasal (6 x 4 cm) and oral (6 x 5 cm) reconstructions. Two osseointegrated implants were inserted into the fibular bone for each patient. Six months after the first-stage procedure, palatal rotation flaps or mucosa grafts were used to cover the exposed implant necks and prepare the implants for prostheses. One month after the second-stage procedure, prostheses were placed. An implant-supported prosthesis was used for one patient and implant/tissue-supported prostheses were used for the others. At a mean follow-up time of 30 months (range, 16 to 38 months), all patients were able to use the dental prosthesis for chewing (beginning 6 weeks after the final procedure) and all patients were satisfied with the cosmetic results.     

PHEMA as a fibrous capsule-resistant breast prosthesis

The presence of a silicone (poly-dimethyl siloxane) breast prosthesis in a breast reconstruction patient typically leads to fibrous tissue encapsulation of the prosthesis. Fibrous capsular contracture forces the prosthesis into a hardened sphere. The initially satisfactory cosmetic result can thus be changed into a deformed mass of inappropriate compliance. It is the author's hope with the present study to identify a material for implantation with a diminished tendency to form fibrous encapsulation, to improve the long-term results of prosthetic implants. The purpose of this investigation was to compare the early capsule production quality of poly-2-hydroxyethyl methacrylate (PHEMA) and poly-dimethyl siloxane (silicone). Each of five rats subcutaneously underwent implantation with both a disk of poly-dimethyl siloxane (control) and a similar disk of PHEMA. In this study, the extent of fibrous encapsulation was assessed at 6 weeks after implantation of the two disk types. The five disks of poly-dimethyl siloxane were embedded in fibrous tissue, whereas there was no apparent fibrous tissue surrounding the implants of PHEMA. The author concludes that the results for PHEMA were superior to those for silicone at 6 weeks with regard to fibrous encapsulation (p = 0.0312).     

Mechanical response comparison in an implant overdenture retained by ball attachments on conventional regular and mini dental implants: a finite element analysis

This study investigates the bone/implant mechanical responses in an implant overdenture retained by ball attachments on two conventional regular dental implants (RDI) and four mini dental implants (MDI) using finite element (FE) analysis. Two FE models of overdentures retained by RDIs and MDIs for a mandibular edentulous patient with validation within 6% variation errors were constructed by integrating CT images and CAD system. Bone grafting resulted in 2 mm thickness at the buccal side constructed for the RDIs-supported model to mimic the bone augmentation condition for the atrophic alveolar ridge. Nonlinear hyperelastic material and frictional contact element were used to simulate characteristic of the ball attachment-retained overdentures. The results showed that a denture supported by MDIs presented higher surrounding bone strains than those supported by RDIs under different load conditions. Maximum bone micro strains were up to 6437/2987 and 13323/5856 for MDIs/RDIs under single centric and lateral contacts, respectively. Corresponding values were 4429/2579 and 9557/5774 under multi- centric and lateral contacts, respectively. Bone micro strains increased 2.06 and 1.96-folds under single contact, 2.16 and 2.24-folds under multiple contacts for MDIs and RDIs when lateral to axial loads were compared. The maximum RDIs and MDIs implant stresses in all simulated cases were found by far lower than their yield strength. Overdentures retained using ball attachments on MDIs in poor edentulous bone structure increase the surrounding bone strain over the critical value, thereby damaging the bone when compared to the RDIs. Eliminating the occlusal single contact and oblique load of an implant-retained overdenture reduces the risk for failure.     

Stability of dental implants in microvascular osseous transplants

Microvascular iliac crest and scapula transplants have been used in reconstruction of the lower jaw following tumor surgery. It has only been with the insertion of dental implants that a satisfactory prosthetic rehabilitation of the patient has been achieved. For this study, a follow-up of 38 patients with lower jaw tumors was carried out. The patients had been treated with partial resection of the lower jaw and neck dissection with microvascular iliac crest transplants (n = 20) or microvascular scapula transplants (n = 18); this was followed with dental implants (n = 143) in the region of the transplants or the local lower jaw. One hundred thirty-nine of the 143 dental implants were loaded by prosthetic superstructures. In all patients, the implant situation was evaluated on average 2 years 5 months after implantation. Periotest values, periimplant probing depths, and contact bleeding were registered, and the extent of periimplant bone loss was defined radiographically. The clinical situation in the region of the implant was compared for both types of implants and also with the nonresected lower jaw. The average Periotest values were within the normal range for all groups. In one scapula implant, however, a better average of Periotesting, -3.3, was found compared with implants of the iliac crest with Periotest values of -0.7. A measurement of -2.1 was found for the local lower jaw, similar to that of scapula implants. Pathologic probing depths were found for all three compared groups. The radiographically determined vertical loss of bone was the same for all three groups, on average 1 mm at 27 months postoperatively. The highest incidence of sulcus bleeding was found in the scapula implant group. Thus, it can be stated that the scapula transplants provide a similar transplant site to local lower jaw bone, whereas implants in iliac crest transplants show lesser bony stability. Periimplant soft-tissue conditions are worse for both types of transplants compared with local tissue of the lower jaw.     

Computational framework to model and design surgical meshes for hernia repair

Surgical procedures for hernia surgery are usually performed using prosthetic meshes. In spite of all the improvements in these biomaterials, the perfect match between the prosthesis and the implant site has not been achieved. Thus, new designs of surgical meshes are still being developed. Previous to implantation in humans, the validity of the meshes has to be addressed, and to date experimental studies have been the gold standard in testing and validating new implants. Nevertheless, these procedures involve long periods of time and are expensive. Thus, a computational framework for the simulation of prosthesis and surgical procedures may overcome some disadvantages of the experimental methods. The computational framework includes two computational models for designing and validating the behaviour of new meshes, respectively. Firstly, the beam model, which reproduces the exact geometry of the mesh, is set to design the weave and determine the stiffness of the surgical prosthesis. However, this implies a high computational cost whereas the membrane model, defined within the framework of the large deformation hyperelasticity, is a relatively inexpensive computational tool, which also enables a prosthesis to be included in more complex geometries such as human or animal bodies.     

Finite element analysis of implant-supported prosthesis with pontic and cantilever in the posterior maxilla

The aim of this study was to evaluate the influence of pontic and cantilever designs (mesial and distal) on 3-unit implant-retained prosthesis at maxillary posterior region verifying stress and strain distributions on bone tissue (cortical and trabecular bones) and stress distribution in abutments, implants and fixation screws, under axial and oblique loadings, by 3D finite element analysis. Each model was composed of a bone block presenting right first premolar to the first molar, with three or two external hexagon implants (4.0 × 10 mm), supporting a 3-unit splinted dental fixed dental prosthesis with the variations: M1 – three implants supporting splinted crowns; M2 – two implants supporting prosthesis with central pontic; M3 – two implants supporting prosthesis with mesial cantilever; M4 – two implants supporting prosthesis with distal cantilever. The applied forces were 400 N axial and 200 N oblique. The von Mises criteria was used to evaluate abutments, implants and fixation screws and maximum principal stress and microstrain criteria were used to evaluate the bone tissue. The decrease of the number of implants caused an unfavorable biomechanical behavior for all structures (M2, M3, M4). For two implant-supported prostheses, the use of the central pontic (M2) showed stress and strain distributions more favorable in the analyzed structures. The use of cantilever showed unfavorable biomechanical behavior (M3 and M4), mainly for distal cantilever (M4). The use of three implants presented lower values of stress and strain on the analyzed structures. Among two implant-supported prostheses, prostheses with cantilever showed unfavorable biomechanical behavior in the analyzed structures, especially for distal cantilever.     

Expandable tumor prostheses in children

Any surgical resection in the lower extremities in children will cause a leg length discrepancy from physeal resection. To avoid the resulting functional deficit, leg length discrepancy must be reconciled with surgical techniques to approximate equal leg lengths at skeletal maturity. Currently there are several manufacturers who offer options for prosthetic reconstruction with expandable implants. These implants can be expanded to a length projected on the basis of three factors: the length of bone resected, the anticipated future growth of the contralateral extremity, and the estimated discrepancy of limb length at skeletal maturity. In this article, we review the basic principles and guidelines for prediction of remaining bone growth and planning lengthening in children, and present the currently available expandable prostheses and the evolution performed over time.     

Efficiency of polylactide/polyglycolide copolymers bone replacements in bone defects healing measured by densitometry

Healing of bone defects is the most frequent cause of failure in surgical treatments of an odontogenic ostitic processes. The aim of this study was to determine successfulness in healing of bone defects after implantation of alloplastic co-polymer-polyglycol bone implant. A group of 45 cases with periradicular ostitic processes were examined. The densitometric measurements were taken from radiovisiographic dental x-ray images. Patients were observed throughout a period of one year. The results obtained were analyzed and presented graphically. Thirty-eight patients (84%) were treated successfully, and seven patients (16%) showed unsuccessful healing of the bone defects. The results obtained indicate that polyglycol copolymer bone implants can be successfully used in a treatment of odontogenically caused bone defects. Their fundamental advantage is a slow biodegradation, which ensures a more suitable area for the apposition of a new bone in the defect, simple application in clinical work and the possibility of a mutual combination of all three available forms.     

Placement of endosteal implants in the zygoma after maxillectomy: a Cadaver study using surgical navigation

Endosteal implants facilitate obturator prosthesis fixation in tumor patients after maxillectomy. Previous clinical studies have shown, however, that the survival of implants placed into available bone after maxillectomy is generally poor. Nevertheless, implants positioned optimally in residual zygomatic bone provide superior stability from a biomechanical point of view. In a pilot study, the authors assessed the precision of VISIT, a computer-aided surgical navigation system dedicated to the placement of endosteal implants in the maxillofacial area. Five cadaver specimens underwent hemimaxillectomy. The cadaver head was matched to a preoperative high-resolution computed tomograph by using implanted surgical microscrews as fiducial markers. The position of a surgical drill relative to the cadaver head was determined with an optical tracking system. Implants were placed into the zygomatic arch, where maximum bone volume was available. The results were assessed using tests for localization accuracy and postoperative computed tomographic scans of the cadaver specimens. The localization accuracy of landmarks on the bony skull was 0.6 +/- 0.3 mm (average +/- SD), as determined with a 5-df pointer probe; the localization accuracy of the tip of the implant burr was 1.7 +/- 0.4 mm. The accuracy of the implant position compared with the planned position was 1.3 +/- 0.8 mm for the external perforation of the zygoma and 1.7 +/-1.3 mm for the internal perforation. Eight of 10 implants were inserted with maximal contact to surrounding bone, and two implants were located unfavorably. Reliable placement of implants in this region is difficult to achieve. The technique described in this article may be very helpful in the management of patients after maxillary resection with poor support for obturator prostheses.     

Auricular reconstruction: indications for autogenous and prosthetic techniques

Learning Objectives: After studying this article, the participant should be able to: 1. Describe the alternatives for auricular reconstruction. 2. Discuss the pros and cons of autogenous reconstruction of total or subtotal auricular defects. 3. Enumerate the indications for prosthetic reconstruction of total or subtotal auricular defects. 4. Understand the complexity of and the expertise required for prosthetic reconstruction of auricular defects.The indications for autogenous auricular reconstruction versus prosthetic reconstruction with osseointegrated implant-retained prostheses were outlined in Plastic and Reconstructive Surgery in 1994 by Wilkes et al. of Canada, but because of the relatively recent Food and Drug Administration approval (1995) of extraoral osseointegrated implants, these indications had not been examined by a surgical unit in the United States. The purpose of this article is to present an evolving algorithm based on an experience with 98 patients who underwent auricular reconstruction over a 10-year period. From this experience, the authors conclude that autogenous reconstruction is the procedure of choice in the majority of pediatric patients with microtia. Prosthetic reconstruction of the auricle is considered in such pediatric patients with congenital deformities for the following three relative indications: (1) failed autogenous reconstruction, (2) severe soft-tissue/skeletal hypoplasia, and/or (3) a low or unfavorable hairline. A fourth, and in our opinion the ideal, indication for prosthetic ear reconstruction is the acquired total or subtotal auricular defect, most often traumatic or ablative in origin, which is usually encountered in adults. Although prosthetic reconstruction requires surgical techniques that are less demanding than autogenous reconstruction, construction of the prosthesis is a time-consuming task requiring experience and expertise. Although autogenous reconstruction presents a technical challenge to the surgeon, it is the prosthetic reconstruction that requires lifelong attention and may be associated with late complications. This article reports the first American series of auricular reconstruction containing both autogenous and prosthetic methods by a single surgical team.     

Three-dimensional finite element analysis of stress distribution in retention screws of different crown–implant ratios

The retaining screw of the implant-supported dental prosthesis is the weakest point of the crown/implant system. Furthermore, crown height is another important factor that may increase the lever arm. Therefore, the aim of this study was to assess the stress distribution in implant prosthetic screws with different heights of the clinical crown of the prosthesis using the method of three-dimensional finite element analysis. Three models were created with implants (3.75 mm × 10 mm) and crowns (heights of 10, 12.5 and 15 mm). The results were visualised by means of von Mises stress maps that increased the crown heights. The screw structure exhibited higher levels of stresses in the oblique load. The oblique loading resulted in higher stress concentration when compared with the axial loading. It is concluded that the increase of the crown was damaging to the stress distribution on the screw, mainly in oblique loading.     

Accelerated rehabilitation of an edentulous patient with an implant retained dental prosthesis: a case report

This case report details the successful rehabilitation of an edentulous patient using a complete upper prosthesis and a lower implant retained overdenture. The provision of care was split between a specialist centre and a primary care setting. This approach reduced inconvenience to the patient. Modern surgical and prosthodontic techniques also reduced the total delivery time. After initial consultation a new set of complete dentures was prescribed with changes in design to the originals. The patient was also planned for placement of two mandibular implants to stabilise and retain the mandibular denture. The first line of treatment involved provision of a new set of dentures constructed by the patient's general dental practitioner. Dental implants were then placed in a specialist centre and the patient returned to the dental practice for attachment of the lower denture to the dental implants. The benefits and success of mandibular implant retained dentures are well documented. With delivery of the overdenture, the patient reported increased satisfaction with his prostheses which allowed him to eat a greater range of foods and enabled him to feel confident when speaking and socialising.     

Treatment of midfacial defects using prostheses supported by ITI dental implants

The purpose of this study was to evaluate retrospectively the use of ITI dental implants used for anchoring facial prostheses in the restorative treatment of midface defects. The authors analyzed the clinical data of 26 patients with orbital defects (n = 11), orbitonasal defects (n = 4), orbitonasomaxillary defects (n = 3), and nasal defects (n = 8). Data included age, sex, primary disease, implant position, implant length, implant failure, prosthetic attachment, radiation therapy, and peri-implant skin reactions. Follow-up was at 1, 3, 6, and 12 months and then on a yearly basis. The authors noted the status of healing and complications, if any. In total, 62 implants were placed as follows: 27 (43.5 percent) for orbital prostheses, 12 (19.4 percent) for orbitonasal prostheses, 14 (22.6 percent) for orbitonasomaxillary prostheses, and nine (14.5 percent) for nasal prostheses. Thirty-eight implants (61.3 percent) were placed in previously irradiated areas in 18 patients (69.2 percent). Mild skin reactions together with mild accumulation of sebaceous crusting around implants were recorded in 14.2 percent of the skin observations. No patient experienced severe inflammation requiring administration of systemic antibiotics or surgical revision. Implant success was 100 percent in both irradiated and nonirradiated patients. In conclusion, ITI dental implants result in a high rate of success in retaining midface prostheses and offer good stability and aesthetic satisfaction.     

Microbial growth in saline breast implants and saline tissue expanders

The subject of microbial growth within the saline medium of prosthetic breast implants has been one of great controversy in recent years. Although several articles have described microbial growth within the tissue surrounding implanted breast prostheses, few have attempted to determine the possibility of such contamination of the luminal saline. The authors studied the intraluminal saline medium of a series of explanted breast prostheses with the objective of identifying any microbial contamination. Over a 6-month period, a consecutive series of saline-filled breast implants and tissue expanders were removed from 37 patients. Under the supervision of a microbiologist, saline extracted from each implant was subjected to bacterial and fungal cultures, Gram staining, and acid-fast staining. A total of 24 saline-filled breast implants were removed from 15 patients, and 32 saline-filled tissue expanders were removed from 22 patients. The average length of implantation was 28.1 months for the implants and 7.1 months for the expanders. None of the saline within the implants or expanders within our series displayed any evidence of microbial contamination. These results suggest that microbial contamination of the luminal saline of prosthetic breast implants is an extremely unlikely event.     

The carriage of Candida species on the dorsal surface of the tongue: the correlation with the dental, periodontal and prosthetic status in elderly subjects

Objectives: To screen the carriage status of Candida species, especially Candida albicans and its genotype in an epidemiological survey and to investigate its correlation with the dental, periodontal and prosthetic status of healthy elderly subjects. Materials and methods: Microbiological samples were collected from the dorsum of the tongue of 366 subjects, aged 75, and cultured on CHROMagar medium. The carriage status of Candida spp. and the distribution of C. albicans genotypes by a polymerase chain reaction (PCR) method were analysed and compared with the dental, periodontal and prosthetic status of the subjects. Results: A high carriage rate (68.6%) of Candida spp. and the predominant species of C. albicans (72.1%) were found in this study. The prevalence, density and multi‐species of Candida spp. were significantly related to the presence of a dental prosthesis. In C. albicans, genotype A predominated (56.4%) and genotype D showed a higher prevalence (12.5%) than previous reports. When comparing Candida spp. carriage with the oral status, significant positive correlations were found with the presence of any dental prosthesis, missing teeth, the number of retained roots and the percentage of sites showing bleeding on probing (BOP), while significant negative correlations were found with the number of teeth present, sound and filled teeth. Conclusions: Candida carriage on the dorsum of the tongue in healthy elderly is significantly associated with the dental, periodontal and prosthetic status, especially the presence of a dental prosthesis. As the complexity of the prosthesis being worn increased, the relative risk of Candida carriage and the numbers and multi‐species of Candida increased accordingly.     

CAD–CAM prosthetically guided bone regeneration using preformed titanium mesh for the reconstruction of atrophic maxillary arches

The protocol presented here is intended to minimise the intervention in bone reconstruction surgery when severe atrophy or deformity is present in the maxillary arches. A patient underwent augmentation of an atrophic maxillary arch using titanium mesh and particulate autogenous plus bovine demineralised bone. After computed tomography data elaboration, computer-aided design and computer-aided machining were used to plan the augmentation of bone volume to improve the implant position needed to support the final dental prosthesis. The augmented maxilla was rapidly prototyped in plastic, and the titanium mesh was tested on this model before the surgical intervention. Then, the preformed titanium mesh was implanted in the maxillary arch with bone grafting. The bone was augmented relative to the position of the implants for the definitive fixed implant-supported rehabilitation. The protocol presented here is a viable, reproducible way to determine the correct bone augmentation for the final implant-supported prosthetic rehabilitation.     

Rehabilitation with ear prosthesis linked to osseointegrated implants

doi: 10.1111/j.1741‐2358.2011.00612.x Rehabilitation with ear prosthesis linked to osseointegrated implants Background: The absence of an ear, which can be the result of a congenital malformation, surgical tumour resection or traumatic injury, is a significant aesthetic problem. Attachment of ear prostheses with adhesives can cause local irritation for the wearer and affect the colour of the prostheses. Use of implants in craniofacial reconstruction can improve the retention and stability of prostheses giving to patient greater comfort and security relative to adhesive attachment. Objective: The aim of this report was to present a clinical case of a mutilated patient who was rehabilitated by means of installing an ear prosthesis fixed through osseointegrated implants. Materials and methods: The patient had two implants installed in the mastoid region that were linked by a bar, and a clip‐type system was used. The ear prosthesis was constructed from medical‐use silicone, pigmented to match the patient’s skin colour and linked to the retention system. Conclusion: The patient’s rehabilitation was satisfactory from both a functional and an aesthetic point of view, making it possible for the patient to return to a normal social life and regain lost self‐esteem.     

Genome analysis and clinical implications of the bacterial communities in early biofilm formation on dental implants restored with titanium or zirconia abutments

This cross-sectional study aimed to identify and quantify up to 42 target species colonizing the early biofilm of dental implants restored with titanium or zirconia abutments. A total of 720 samples from 20 healthy individuals were investigated. Biofilm samples were collected from the peri-implant sulci, inner parts of implants, abutment surfaces and prosthetic crowns over a functioning period of 30 days. Checkerboard DNA–DNA hybridization was used for microbial detection and quantitation. Clinical characteristics (probing depth, bleeding on probing, clinical attachment level and marginal bone loss) were also investigated during the monitoring period. Genome counts were low at the implant loading time point for both the abutment materials, and increased over time. Both the titanium and the zirconia groups presented similar microbial counts and diversity over time, and the microbiota was very similar to that colonizing the remaining teeth. Clinical findings were consistent with a healthy condition with no significant difference regarding marginal bone loss between the two materials.