Thermoseparating water/polymer system: a novel one-polymer aqueous two-phase system for protein purification

In this study we show that proteins can be partitioned and separated in a novel aqueous two-phase system composed of only one polymer in water solution. This system represents an attractive alternative to traditional two-phase systems which uses either two polymers (e.g., PEG/dextran) or one polymer in high-salt concentration (e.g., PEG/salt). The polymer in the new system is a linear random copolymer composed of ethylene oxide and propylene oxide groups which has been hydrophobically modified with myristyl groups (C(14)H(29)) at both ends (HM-EOPO). This polymer thermoseparates in water, with a cloud point at 14 degrees C. The HM-EOPO polymer forms an aqueous two-phase system with a top phase composed of almost 100% water and a bottom phase composed of 5-9% HM-EOPO in water when separated at 17-30 degrees C. The copolymer is self-associating and forms micellar-like structures with a CMC at 12 microM (0.01%). The partitioning behavior of three proteins (lysozyme, bovine serum albumin, and apolipoprotein A-1) in water/HM-EOPO two-phase systems has been studied, as well as the effect of various ions, pH, and temperature on protein partitioning. The amphiphilic protein apolipoprotein A-1 was strongly partitioned to the HM-EOPO-rich phase within a broad-temperature range. The partitioning of hydrophobic proteins can be directed with addition of salt. Below the isoelectric point (pI) BSA was partitioned to the HM-EOPO-rich phase and above the pI to the water phase when NaClO(4)was added to the system. Lysozyme was directed to the HM-EOPO phase with NaClO(4), and to the water phase with Na-phosphate. The possibility to direct protein partitioning between water and copolymer phases shows that this system can be used for protein separations. This was tested on purification of apolipoprotein A-1 from human plasma and Escherichia coli extract. Apolipoprotein A-1 could be recovered in the HM-EOPO-rich phase and the majority of contaminating proteins in the water phase. By adding a new water/buffer phase at higher pH and with 100 mM NaClO(4), and raising the temperature for separation, the apolipoprotein A-1 could be back-extracted from the HM-EOPO phase into the new water phase. This novel system has a strong potential for use in biotechnical extractions as it uses only one polymer and can be operated at moderate temperatures and salt concentrations and furthermore, the copolymer can be recovered.     

Tryptophan-tagged cutinase studied by steady state fluorescence for understanding of tag interactions in aqueous two-phase systems

Genetic engineering has been used to construct fusion proteins of Fusarium solani pisi cutinase and tryptophan-based tags, expressed in Saccharomyces cerevisiae, to increase the partitioning in aqueous two-phase systems. The separation systems were composed of thermoseparating polymers (random copolymers of ethylene oxide and propylene oxide, EOPO) and detergents (C(12)EO(n)). In this study, the fluorescence behaviour of the peptide-tagged protein, free peptide tag and tryptophan was investigated. The tryptophan-tagged proteins, cutinase-(WP)(4) and cutinase-TGGSGG-(WP)(4), showed emission spectra similar to the free peptides and tryptophan, indicating solvent exposure of the tag. The influence of polymers and detergents on the fluorescence of tagged proteins was examined. When peptides and tagged proteins were exposed to polymer, a slight blue shift of the emission maximum was observed. Larger blue shifts of the emission maximum were observed when C(12)EO(n) detergents were utilised. The results correlate with aqueous two-phase partitioning where addition of C(12)EO(n) detergents results in more extreme partitioning compared to systems containing only polymers. Dynamic light scattering (DLS) measurements of the EOPO copolymers were carried out, showing that the polymers did not aggregate at concentrations used in aqueous two-phase systems. Quenching of fluorescence with iodide for both proteins and peptide tags was studied. Plots according to the Stern-Volmer equation resulted in a linear fit, indicating exposed tryptophan residues for both free peptides and fusion proteins. The quenching constants were similar for both tagged protein and free peptide tag. The fluorescence results indicated that the tryptophan residues in the tag were exposed to the solvent and could interact with detergents and polymers in the two-phase systems.     

A novel two-step extraction method with detergent/polymer systems for primary recovery of the fusion protein endoglucanase I-hydrophobin I

Extraction systems for hydrophobically tagged proteins have been developed based on phase separation in aqueous solutions of non-ionic detergents and polymers. The systems have earlier only been applied for separation of membrane proteins. Here, we examine the partitioning and purification of the amphiphilic fusion protein endoglucanase I(core)-hydrophobin I (EGI(core)-HFBI) from culture filtrate originating from a Trichoderma reesei fermentation. The micelle extraction system was formed by mixing the non-ionic detergent Triton X-114 or Triton X-100 with the hydroxypropyl starch polymer, Reppal PES100. The detergent/polymer aqueous two-phase systems resulted in both better separation characteristics and increased robustness compared to cloud point extraction in a Triton X-114/water system. Separation and robustness were characterized for the parameters: temperature, protein and salt additions. In the Triton X-114/Reppal PES100 detergent/polymer system EGI(core)-HFBI strongly partitioned into the micelle-rich phase with a partition coefficient (K) of 15 and was separated from hydrophilic proteins, which preferably partitioned to the polymer phase. After the primary recovery step, EGI(core)-HFBI was quantitatively back-extracted (K(EGIcore-HFBI)=150, yield=99%) into a water phase. In this second step, ethylene oxide-propylene oxide (EOPO) copolymers were added to the micelle-rich phase and temperature-induced phase separation at 55 degrees C was performed. Total recovery of EGI(core)-HFBI after the two separation steps was 90% with a volume reduction of six times. For thermolabile proteins, the back-extraction temperature could be decreased to room temperature by using a hydrophobically modified EOPO copolymer, with slightly lower yield. The addition of thermoseparating co-polymer is a novel approach to remove detergent and effectively releases the fusion protein EGI(core)-HFBI into a water phase.     

A novel two-step extraction method with detergent/polymer systems for primary recovery of the fusion protein endoglucanase I–hydrophobin I

Extraction systems for hydrophobically tagged proteins have been developed based on phase separation in aqueous solutions of non-ionic detergents and polymers. The systems have earlier only been applied for separation of membrane proteins. Here, we examine the partitioning and purification of the amphiphilic fusion protein endoglucanase I_core–hydrophobin I (EGI_core–HFBI) from culture filtrate originating from a Trichoderma reesei fermentation. The micelle extraction system was formed by mixing the non-ionic detergent Triton X-114 or Triton X-100 with the hydroxypropyl starch polymer, Reppal PES100. The detergent/polymer aqueous two-phase systems resulted in both better separation characteristics and increased robustness compared to cloud point extraction in a Triton X-114/water system. Separation and robustness were characterized for the parameters: temperature, protein and salt additions. In the Triton X-114/Reppal PES100 detergent/polymer system EGI_core–HFBI strongly partitioned into the micelle-rich phase with a partition coefficient (K) of 15 and was separated from hydrophilic proteins, which preferably partitioned to the polymer phase. After the primary recovery step, EGI_core–HFBI was quantitatively back-extracted (K_{EGIcore–HFBI}=150, yield=99%) into a water phase. In this second step, ethylene oxide–propylene oxide (EOPO) copolymers were added to the micelle-rich phase and temperature-induced phase separation at 55°C was performed. Total recovery of EGI_core–HFBI after the two separation steps was 90% with a volume reduction of six times. For thermolabile proteins, the back-extraction temperature could be decreased to room temperature by using a hydrophobically modified EOPO copolymer, with slightly lower yield. The addition of thermoseparating co-polymer is a novel approach to remove detergent and effectively releases the fusion protein EGI_core–HFBI into a water phase.     

Genetic engineering of the Fusarium solani pisi lipase cutinase for enhanced partitioning in PEG-phosphate aqueous two-phase systems

The Fusarium solani pisi lipase cutinase has been genetically engineered to investigate the influence of C-terminal peptide extensions on the partitioning of the enzyme in PEG-salt based aqueous two-phase bioseparation systems. Seven different cutinase lipase variants were constructed containing various C-terminal peptide extensions including tryptophan rich peptide tags ((WP)(2) and (WP)(4)), positively ((RP)(4)) and negatively ((DP)(4)) charged tags as well as combined tags with tryptophan together with either positively ((WPR)(4)) or negatively ((WPD)(4)) charged amino acids. The modified cutinase variants were stably produced in Escherichia coli as secreted to the periplasm from which they were efficiently purified by IgG-affinity chromatography employing an introduced N-terminal IgG-binding ZZ affinity fusion partner present in all variants. Partitioning experiments performed in a PEG 4000/sodium phosphate aqueous two-phase system showed that for variants containing either (WP)(2) or (WP)(4) peptide extensions, 10- to 70-fold increases in the partitioning to the PEG rich top-phase were obtained, when compared to the wild type enzyme. An increased partitioning was also seen for cutinase variants tagged with both tryptophans and charged amino acids, whereas the effect of solely charged peptide extensions was relatively small. In addition, when performing partitioning experiments from cell disintegrates, the (WP)(4)-tagged cutinase showed a similarly high PEG-phase partitioning, indicating that the effect from the peptide tag was unaffected by the background of the host proteins. Taken together, the results show that the partitioning of the recombinantly produced cutinase model enzyme could be significantly improved by relatively minor genetic engineering and that the effects observed for purified proteins are retained also in an authentic whole cell disintegrate system. The results presented should be of general interest also for the improvement of the partitioning properties of other industrially interesting proteins including bulk enzymes.     

Extraction of peptide tagged cutinase in detergent-based aqueous two-phase systems

Detergent-based aqueous two-phase systems have the advantage to require only one auxiliary chemical to induce phase separation above the cloud point. In a systematic study the efficiency of tryptophan-rich peptide tags was investigated to enhance the partitioning of an enzyme to the detergent-rich phase using cutinase as an example. Up to 90% enzyme activity could be extracted in a single step from whole broth of recombinant Saccharomyces cerevisiae expressing cutinase variants carrying a (WP)₄ tag. In contrast, the extraction yield of wild type cutinase was 2–3% only. The detergent concentration and the temperature are the main parameters to optimize the extraction yield. Considering availability, extraction yields, and price the detergent Agrimul NRE 1205 served best for enzyme recovery.     

Effect of salts and surfactants on the partitioning of Fusarium solani pisi cutinase in aqueous two-phase systems of thermoseparating ethylene oxide/propylene oxide random copolymer and hydroxypropyl starch

An aqueous two-phase system composed by a thermoseparating random copolymer of ethylene oxide/propylene oxide 50/50 (%w/w), Breox, and hydroxypropyl starch – Reppal PES 100 was evaluated for the partitioning of Fusarium solani pisi recombinant cutinase. The effect of several additives on the partitioning of pure cutinase was evaluated. Micelles of sodium dodecanoate provided a ten-fold increase of the partitioning coefficient (K=9) and recovery yields of 60-75%. The phase diagrams of the systems composed of Breox, Reppal and sodium dodecanoate were determined and it was found that in systems with high surfactant concentrations, the binodal was moved to lower polymer concentrations, enabling a two-phase system with 6% (w/w) of each polymer.     

Pilot-scale extraction of an intracellular recombinant cutinase from E. coli cell homogenate using a thermoseparating aqueous two-phase system

A thermoseparating aqueous two-phase system for extraction of a recombinant cutinase fusion protein from Escherichia coli homogenate has been scaled up to pilot scale. The target protein ZZ-cutinase-(WP)(4) was produced in a fed batch process at 500 l to a concentration of 12% of the total protein and at a cell concentration of 19.7 g l(-1). After harvest and high-pressure homogenisation a first extraction step was performed in an EO(50)PO(50) (50% (w/w) ethylene oxide and 50% (w/w) propylene oxide) thermopolymer/amylopectin rich Waxy barley starch system. The (WP)(4) tag was used for enhanced target protein partitioning to the EO(50)PO(50) phase while the cell debris was collected in the starch phase. A second extraction step followed where the recovered EO(50)PO(50) phase from the first step was supplemented with a non-ionic detergent (C(12-18)EO(5)) and heated to the cloud point (CP) temperature (45 degrees C). One polymer-rich liquid phase and one almost pure aqueous phase were formed. The target protein could be obtained in a water phase after the thermal phase separation at a total recovery over the extraction steps of 71% and a purification factor of 2.5. We were able to demonstrate that a disk-stack centrifugal separator could be adapted for rapid separation of both primary and thermoseparated phase systems.     

Application of the aqueous two-phase systems of ethylene and propylene oxide copolymer-maltodextrin for protein purification

In this study, the effect of several factors that govern the partitioning behaviour of three model proteins, such as bovine serum albumin, lysozyme and trypsin was analysed in a two-phase system formed by maltodextrin and a copolymer of ethylene and propylene oxides. The protein partition coefficient (K(r)) showed to be very sensitive to temperature changes, protein molecular weight, pH medium and the lyotropic ion presence. The phase diagram obtained for these novel polymer-polymer two-phase systems shows two phases with high polymer concentrations. The maltodextrin is enriched in the bottom phase while the copolymer of ethylene and propylene oxides is found in the upper phase. Since this copolymer is thermoreactive, the upper phase can be removed and heated above the copolymer's cloud point resulting in the formation of a new two-phase system with a lower water phase, containing the target protein and an upper copolymer-rich phase. Our results show that systems formed by maltodextrin and a copolymer of ethylene and propylene oxides may be considered as an interesting alternative to be used in protein purification due to their low cost, and also because they offer a viable solution to problems of polymer removal and recycling.     

Primary recovery of a genetically engineered Trichoderma reesei endoglucanase I (Cel 7B) fusion protein in cloud point extraction systems

Here we present data to demonstrate how partitioning of a hydrophilic enzyme can be directed to the hydrophobic detergent-enriched phase of an aqueous two-phase system by addition of short stretches of amino acid residues to the protein molecule. The target enzyme was the industrially important endoglucanase I, EGI (endo-1,4-beta-D-glucan-4-glucanohydrolase, EC 3.2.1.4, Cel7B) of Trichoderma reesei. We investigated the partitioning of three EGI variants containing various C-terminal peptide extensions including Trp-Pro motifs of different lengths and localizations. Additionally, a recently developed system composed of the thermoseparating copolymer HM-EOPO was utilized to study the effects of fusion tags. The addition of peptides containing tryptohan residues enhanced the partitioning of EGI to the HM-EOPO-rich phase. The system composed of a nonionic detergent (Agrimul NRE1205) resulted in the highest partition coefficient (K = 31) and yield (90%) with the construct EGI(core-P5)(WP)(4) containing (Trp-Pro)(4) after a short linker stretch. A recombinant strain of T. reesei Rut-C30 for large-scale production was constructed in which the fusion protein EGI(core-P5)(WP)(4) was expressed from the strong promoter of the cellulase gene cbh1. The fusion protein was successfully expressed and secreted from the fungus during shake-flask cultivations. Cultivation in a 28-L bioreactor however, revealed that the fusion protein is sensitive to proteases. Consequently, only low production levels were obtained in large-scale production trials.     

Separation of amino acids and peptides by temperature induced phase partitioning. Theoretical model for partitioning and experimental data

There is a strong interest in use of ‘smart polymers’ in separation systems. These are polymers which can react on external influence, such as temperature or pH change. With such polymers it is possible from the outside to affect the properties of a separation system. Amphiphilic copolymers show drastic changes in solubility properties, such as self-association and phase separation, at e.g. temperature increase. The random copolymers of ethylene oxide and propylene oxide units (EOPO-polymers) can form aqueous two-phase systems above the copolymer cloud point temperature. Two phases are formed, one consisting of 40–60% polymer in water and the other of almost 100% water. Amino acids and peptides can be partitioned in the thermoseparating systems. The partitioning strongly depends on the solute hydrophobicity, where aromatic amino acids and peptides are partitioned to the polymer phase and hydrophilic to the water phase. Salt effects can be used to enhance the partitioning of charged molecules. The thermodynamic driving forces which govern the partitioning of molecules in a thermoseparated aqueous phase system is described with use of the Flory-Huggins theory for polymer solutions. Expressions are derived which show the entropic and enthalpic effects on solute partitioning. This revised version was published online in July 2006 with corrections to the Cover Date.     

Partitioning and characterization of tyrosine-tagged green fluorescent proteins in aqueous two-phase systems

The green fluorescent protein GFPuv has been genetically engineered to investigate the influence of N-terminal tyrosine extensions in aqueous two-phase systems. Fusions in the N-terminus affected the protein expression, and tags containing three tyrosines and prolines influenced the expression favorably. This effect is probably due to changes in mRNA stability, because the amounts of corresponding mRNAs correlated with the amounts of GFPuv proteins. The partitioning was investigated in two different aqueous two-phase systems, a two-polymer system composed of EO30PO70/dextran and a PEG/salt system with potassium phosphate. Partitioning in the PEG/salt system generally was more favorable than in the EO30PO70/dextran system. Tags with three tyrosines resulted in higher partitioning toward the EO30PO70- and PEG-rich phases, respectively. The effect of adding proline residues to the tag was also investigated, and the partitioning effect of the tag was enhanced when prolines were included in the tags with three tyrosines. The best tyrosine tag, Y3P2, increased the partition coefficient 5 times in the PEG/salt system. Thermoseparation of the EO30PO70 phase allowed recovery of 83% Y3P2-GFPuv protein in a water phase.     

Mechanisms of phase behaviour and protein partitioning in detergent/polymer aqueous two-phase systems for purification of integral membrane proteins

Detergent/polymer aqueous two-phase systems are studied as a fast, mild and efficient general separation method for isolation of labile integral membrane proteins. Mechanisms for phase behaviour and protein partitioning of both membrane-bound and hydrophilic proteins have been examined in a large number of detergent/polymer aqueous two-phase systems. Non-ionic detergents such as the Triton series (polyoxyethylene alkyl phenols), alkyl polyoxyethylene ethers (C(m)EO(n)), Tween series (polyoxyethylene sorbitol esters) and alkylglucosides form aqueous two-phase systems in mixtures with hydrophilic polymers, such as PEG or dextran, at low and moderate temperatures. Phase diagrams for these mixtures are shown and phase behaviour is discussed from a thermodynamic model. Membrane proteins, such as bacteriorhodopsin and cholesterol oxidase, were partitioned strongly to the micelle phase, while hydrophilic proteins, BSA and lysozyme, were partitioned to the polymer phase. The partitioning of membrane protein is mainly determined by non-specific hydrophobic interactions between detergent and membrane protein. An increased partitioning of membrane proteins to the micelle phase was found with an increased detergent concentration difference between the phases, lower polymer molecular weight and increased micelle size. Partitioning of hydrophilic proteins is mainly related to excluded volume effects, i.e. increased phase component size made the hydrophilic proteins partition more to the opposite phase. Addition of ionic detergent to the system changed the partitioning of membrane proteins slightly, but had a strong effect on hydrophilic proteins, and can be used for enhanced separation between hydrophilic proteins and membrane protein.     

Partitioning of Proteins using a Hydrophobically Modified Ethylene Oxide/SDS Aqueous Two-phase System

Summary A novel aqueous two-phase system containing hydrophobically modified ethylene oxide (HM-EO) and sodium dodecyl sulphate (SDS) was developed to enhance the selectivity of protein partitioning in two phases. Phase diagrams of HM-EO/H₂O and HM-EO/SDS/H₂O were measured, and the mechanism of interaction between HM-EO polymer and the anionic surfactant sodium dodecyl sulphate (SDS) was also discussed. It was found that the improvement of selectivity of protein partitioning was related to the increase of electrostatic potential difference between the two phases because of the charged network formed by mixed micelles of HM-EO and SDS in the bottom phase. With bovine serum albumin (BSA) and lysozyme as model proteins, some factors, such as pH, SDS concentration, conductivity and temperature of the system, were investigated for the influences of protein partition in HM-EO/SDS/H₂O systems. The results showed that the addition of SDS not only changed the phase behaviour, but also played an important role in protein partitioning.     

Aqueous micellar two-phase system composed of hyamine-type hydrophobically modified ethylene oxide and application for cytochrome P450 BM-3 separation

The hydrophobically modified ethylene oxide polymer, HM-EO, was modified with an alkyl halide to prepare a hyamine-type HM-EO, named N-Me-HM-EO, which could be used for forming N-Me-HM-EO/buffer aqueous micellar two-phase system. The critical micelle concentration of N-Me-HM-EO solution and the phase diagrams of N-Me-HM-EO/buffer systems were determined. By using this novel aqueous micellar two-phase system, the separation of cytochrome P450 BM-3 from cell extract was explored. The partitioning behavior of P450 BM-3 in N-Me-HM-EO/buffer systems was measured. The influences of some factors such as total proteins concentration, pH, temperature and salt concentration, on the partitioning coefficients of P450 BM-3 were investigated. Since the micellar aggregates in the N-Me-HM-EO enriched phase were positively charged, it was possible to conduct the proteins with different charges to top or bottom phases by adjusting pH and salt concentration in the system. A separation scheme consisting of two consecutive aqueous two-phase extraction steps was proposed: the first extraction with N-Me-HM-EO/buffer system at pH 8.0, and the second extraction in the same system at pH 6.0. The recovery of P450 BM-3 was 73.3% with the purification factor of 2.5. The results indicated that the aqueous micellar two-phase system composed of hyamine modified polysoap has a promising application for selective separation of biomolecules depending on the enhanced electrostatic interactions between micelles and proteins.     

Functional selection of phage displayed peptides for facilitated design of fusion tags improving aqueous two-phase partitioning of recombinant proteins.

Aqueous two-phase systems allow for the unequal distribution of proteins and other molecules in water-rich solutions containing phase separating polymers or surfactants. One approach to improve the partitioning properties of recombinant proteins is to produce the proteins as fused to certain peptide tags. However, the rational design of such tags has proven difficult since it involves a compromise between multivariate parameters such as partitioning properties, solvent accessibility and production/secretion efficiency. In this work, a novel approach for the identification of suitable peptide tag extensions has been investigated. Using the principles of selection, rather than design, peptide sequences contributing to an improved partitioning have been identified using phage display technology. A 40 million member phagemid library of random nona-peptides, displayed as fusion to the major coat protein pVIII of the filamentous phage M13, was employed in the selection of top-phase partitioning phage particles in a PEG/sodium phosphate system. After multiple cycles of selection by partitioning, peptides with high frequencies of both tyrosine and proline residues were found to be over represented in selected clones. The identified peptide sequences, or derivatives thereof, were subsequently individually analyzed for their partitioning behavior as displayed on phage, as free synthetic peptides and as genetically fused to a recombinant model target protein. The results showed that novel peptide sequences capable of enhancing top-phase partitioning without interfering with protein production and secretion indeed could be identified for the aqueous two-phase system investigated.     

Synthesis of dye conjugates of ethylene oxide-propylene oxide copolymers and application in temperature-induced phase partitioning.

Synthesis of conjugates of the ethylene oxide/propylene oxide copolymer UCON 50-HB-5100 and the triazine dyes Cibacron Blue F3G-A and Procion Yellow HE-3G is described. The UCON-dye conjugate of Procion Yellow HE-3G is used as a ligand for affinity partitioning of glucose-6-phosphate dehydrogenase from bakers' yeast. The enzyme is first partitioned in a two-phase system composed of UCON, UCON-ligand and dextran, and the two phases isolated in separate containers. A small amount of salt is then added to the upper phase, which contains the UCON-ligand-enzyme complex, and the temperature increased above the cloud point of the UCON polymer to give a new two-phase system. The new two-phase system consists of an upper salt/water phase containing free enzyme and a lower UCON/water phase containing free UCON-ligand. Temperature-induced phase partitioning is thus seen to be of much assistance in dissociating enzyme-ligand complex, recovering enzyme and recycling UCON-ligand.     

Enzymatic hydrolysis of cellulose in aqueous two-phase systems. I. Partition of cellulases from Trichoderma reesei

The partitioning of endo-beta-glucanase, exo-beta-glucanase, and beta-glucosidase from Trichoderma reesei QM 9414 in aqueous two-phase systems has been studied with the object of designing a phase system for continuous bioconversion of cellulose. The partitioning of the enzymes in two-phase systems composed of various water soluble polymeric compounds were studied. Systems based on dextran and polyethylene glycol (PEG) were optimal for one-sidedly partitioning the enzymes to the bottom phase. The influence of polymer molecular weights, polymer concentration, ionic composition of the medium, pH, temperature, and adsorption of the enzymes to cellulose on the enzyme partition coefficients (K) were studied. By combining the effects of polymer molecular weight and adsorption to cellulose, K values could be reduced for endo-beta-glucanase to 0.02 and for beta-glucosidase to 0.005 at 20 degrees C in a phase system of Dextran 40-PEG 40000 in the presence of excess cellulose, At 50 degrees C, K values were increased by a factor of two. In a phase system based on inexpensive crude dextran and PEG, the partition coefficient for endo-beta-glucanase was 0.16 and for beta-glucosidase was 0.14 at 20 degrees C with excess cellulose present.     

Peptide fusion tags with tryptophan and charged residues for control of protein partitioning in PEG–potassium phosphate aqueous two-phase systems

A partition study with peptides and recombinant proteins in poly(ethylene glycol)4000–potassium phosphate aqueous two-phase systems has been performed. The aim was to study to what extent the insertion of charged residues could affect protein partition in addition to the already observed effects of tryptophan residues. The model proteins used are based on a staphylococcal protein A derivative, Z, and modified by the insertion of peptide tags close to the C-terminus. The tags differed with respect to their content of both Trp, negatively (Asp) and positively charged (Lys) amino acid residues. The same partitioning trends were observed for the peptides and fusion proteins. The effect of Trp residues was to direct the partitioning towards the PEG phase. The insertion of two negatively charged (Asp) residues into a Trp₄-tag enhanced the partition towards the PEG phase even more. The introduction of positively charged (Lys) residues in addition to Trp residues, on the other hand, pulled the peptide or protein towards the potassium phosphate phase. The partitioning of peptides gave a good qualitative picture of the effect of the peptide on partitioning when fused to the protein. The efficiencies of the tags were calculated based on partitioning of tags and fusion proteins, and tag efficiencies generally varied between 60 and 85%.     

Partitioning of peptides and recombinant protein–peptide fusions in thermoseparating aqueous two-phase systems: effect of peptide primary structure

Genetic engineering has been used for fusion of peptides, with different length and composition, on a protein to study the effect on partitioning in an aqueous two-phase system. The system was composed of dextran and the thermoseparating ethylene oxide–propylene oxide random copolymer, EO30PO70. Peptides containing tryptophan, proline, arginine or aspartate residues were fused at the C-terminus of the recombinant protein ZZ-cutinase. The aim was to find effective tags for the lipolytic enzyme cutinase for large-scale extraction. The target protein and peptide tags were partitioned separately and then together in the fusion proteins in order to gain increased understanding of the influence of certain amino acid residues on the partitioning. The salt K₂SO₄ was used to reduce the charge dependent salt effects on partitioning and to evaluate the contribution to the partition coefficient from the hydrophobic–hydrophilic properties of the amino acid residues. The effect of Trp on peptide partitioning was independent of the difference in primary structure for (Trp)n, (Trp-Pro)n, (Ala-Trp-Trp-Pro)n and was only determined by the number of Trp. The effect of the charged residues, Arg and Asp, was dependent on the surrounding residues, i.e. if they were situated next to Trp or not. The partitioning behaviour observed for the peptides was qualitatively and in some cases also quantitatively the same as for the fusion proteins. The effect of the salts sodium perchlorate and triethylammonium phosphate on the partitioning was also studied. The salt effects observed for the peptides were qualitatively similar to the effects observed for the fusion proteins.