Retinal proteins as model systems for membrane protein folding

Experimental folding studies of membrane proteins are more challenging than water-soluble proteins because of the higher hydrophobicity content of membrane embedded sequences and the need to provide a hydrophobic milieu for the transmembrane regions. The first challenge is their denaturation: due to the thermodynamic instability of polar groups in the membrane, secondary structures in membrane proteins are more difficult to disrupt than in soluble proteins. The second challenge is to refold from the denatured states. Successful refolding of membrane proteins has almost always been from very subtly denatured states. Therefore, it can be useful to analyze membrane protein folding using computational methods, and we will provide results obtained with simulated unfolding of membrane protein structures using the Floppy Inclusions and Rigid Substructure Topography (FIRST) method. Computational methods have the advantage that they allow a direct comparison between diverse membrane proteins. We will review here both, experimental and FIRST studies of the retinal binding proteins bacteriorhodopsin and mammalian rhodopsin, and discuss the extension of the findings to deriving hypotheses on the mechanisms of folding of membrane proteins in general. This article is part of a Special Issue entitled: Retinal Proteins—You can teach an old dog new tricks.     

Protein refolding in an oscillatory flow reactor

We demonstrate that an oscillatory flow reactor is a viable reactor for protein refolding via direct dilution. The mixing characteristics of the oscillatory flow reactor are well described and controllable and, importantly, can be scaled-up to process scale without a loss of mixing efficiency. This makes the oscillatory flow reactor an attractive alternative to conventional stirred-tank reactors for process-scale renaturation.     

Refolding strategies from inclusion bodies in a structural genomics project

The South-Paris Yeast Structural Genomics Project aims at systematically expressing, purifying and determining the structure of S. cerevisiae proteins with no detectable homology to proteins of known structure. We brought 250 yeast ORFs to expression in E. coli, but 37% of them form inclusion bodies. This important fraction of proteins that are well expressed but lost for structural studies prompted us to test methodologies to recover these proteins. Three different strategies were explored in parallel on a set of 20 proteins: (1) refolding from solubilized inclusion bodies using an original and fast 96-well plates screening test, (2) co-expression of the targets in E. coli with DnaK-DnaJ-GrpE and GroEL-GroES chaperones, and (3) use of the cell-free expression system. Most of the tested proteins (17/20) could be resolubilized at least by one approach, but the subsequent purification proved to be difficult for most of them.     

Ratiocinative screen of eukaryotic integral membrane protein expression and solubilization for structure determination

Persistent hurdles impede the successful determination of high-resolution crystal structures of eukaryotic integral membrane proteins (IMP). We designed a high-throughput structural genomics oriented pipeline that seeks to minimize effort in uncovering high-quality, responsive non-redundant targets for crystallization. This “discovery-oriented” pipeline sidesteps two significant bottlenecks in the IMP structure determination pipeline: expression and membrane extraction with detergent. In addition, proteins that enter the pipeline are then rapidly vetted by their presence in the included volume on a size-exclusion column—a hallmark of well-behaved IMP targets. A screen of 384 rationally selected eukaryotic IMPs in baker’s yeast Saccharomyces cerevisiae is outlined to demonstrate the results expected when applying this discovery-oriented pipeline to whole-organism membrane proteomes. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users. Franklin A. Hays and Zygy Roe-Zurz have contributed equally to this work.     

Preparation of PVA/chitosan lipase membrane reactor and its application in synthesis of monoglyceride

Polyvinyl alcohol (PVA)/chitosan (CS) composite lipase membrane was prepared in this paper, which was used for enzymatic processing of fats and oils. The parameters, such as concentration of lipase, pH, and cross-linking agent as well as metal ions, which influence the immobilization of lipase in membrane, were optimized. The immobilized activity of lipase was 2.64 IU/cm² with recovery of 24%. The membrane reactor was used in a two-phase system reaction to synthesize monoglyceride (MG) by hydrolysis of palm oil, which was reused for at least nine batches with yield of 32–50%.     

Refolding of lactate dehydrogenase by zeolite beta

We used zeolite beta as an adsorbing matrix to refold recombinant lactate dehydrogenase (LDH) protein collected as an insoluble aggregate from a bacterial expression system. The adsorption isotherm revealed that 1 g of zeolite adsorbed 200 mg of denatured LDH solubilized with a buffer containing 6 M of guanidine hydrochloride. The pH of the buffer had little effect on the adsorption, but this property was abolished by preincubation of the zeolite with polyethylene glycol (PEG) in a weight ratio of 1:10. These data suggest that the adsorption of LDH depends on the hydrophobicity of the zeolite surface, and that the adsorption of PEG to zeolite is sufficient to release LDH from its surface. LDH was thus released by refolding buffer containing PEG and arginine, and soluble LDH was obtained in its active enzymatic form. The addition of arginine dramatically increased the yield of LDH in a dose‐dependent manner. The overall refolding efficiency was optimized to 35%. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Glucose oxidase catalysed oxidation of glucose in a dialysis membrane electrochemical reactor (D-MER)

The purpose of this work was to evaluate the effectiveness of a new Membrane Electrochemical Reactor (MER) for the production of gluconic acid by glucose oxidase (GOD) catalysed glucose oxidation. The GOD was confined against the electrode surface with a dialysis membrane. The role of the electrochemical step was to eliminate by oxidation the hydrogen peroxide that appeared as a by-product of the reaction and strongly inhibited and/or inactivated GOD. The dialysis MER gave a transformation ratio of 30% with an initial glucose concentration of around 300 mM. This result is significantly better than the maximum of 10% obtained when hydrogen peroxide was eliminated by addition of a large excess of catalase in solution, as is generally done. The D-MER also revealed unexpected properties of the enzyme kinetics, such as an oscillatory behaviour, which were discussed.     

Utilization of protein intrinsic disorder knowledge in structural proteomics

Intrinsically disordered proteins (IDPs) and proteins with long disordered regions are highly abundant in various proteomes. Despite their lack of well-defined ordered structure, these proteins and regions are frequently involved in crucial biological processes. Although in recent years these proteins have attracted the attention of many researchers, IDPs represent a significant challenge for structural characterization since these proteins can impact many of the processes in the structure determination pipeline. Here we investigate the effects of IDPs on the structure determination process and the utility of disorder prediction in selecting and improving proteins for structural characterization. Examination of the extent of intrinsic disorder in existing crystal structures found that relatively few protein crystal structures contain extensive regions of intrinsic disorder. Although intrinsic disorder is not the only cause of crystallization failures and many structured proteins cannot be crystallized, filtering out highly disordered proteins from structure-determination target lists is still likely to be cost effective. Therefore it is desirable to avoid highly disordered proteins from structure-determination target lists and we show that disorder prediction can be applied effectively to enrich structure determination pipelines with proteins more likely to yield crystal structures. For structural investigation of specific proteins, disorder prediction can be used to improve targets for structure determination. Finally, a framework for considering intrinsic disorder in the structure determination pipeline is proposed.     

A new Trichoplusia ni cell line for membrane protein expression using a baculovirus expression vector system

A new cell line, MSU-TnT4 (TnT4), was established from Trichoplusia ni embryos for use with baculovirus expression vectors and evaluated for its potential for membrane protein production. To evaluate membrane protein synthesis, recombinant baculoviruses were constructed to express the human neurotensin receptor 1 as an enhanced green fluorescent protein (GFP) fusion. TnT4 cells had a doubling time of 21 h and expressed the membrane-GFP fusion protein at approximately twice the level as Sf21 cells from the p10 promoter, as evaluated by GFP intensity. Expression of secreted alkaline phosphatase (SEAP) was similar to that of Sf21 cells. Expression of membrane-GFP fusion proteins in recombinant baculoviruses provides a rapid method for evaluating the potential of new cell lines for the production of membrane proteins using a baculovirus expression vector system (BEVS).     

Expression of a modified green fluorescent protein gene in transgenic maize plants and progeny

Several modifications of a wild-type green fluorescent protein (GFP) gene were combined into a single construct, driven by the ubi-1 promoter and intron region, and transformed into maize. Green fluorescence, indicative of GFP expression, was observed in stably transformed callus as well as in leaves and roots of regenerated plants and their progeny. Cell wall autofluorescence made GFP expression difficult to observe in sections of leaves and roots. However, staining sections with toluidine blue allowed detection of GFP in transgenic tissue. Bright GFP fluorescence was observed in approximately 50% of the pollen of transgenic plants. These results suggest that GFP can be used as a reporter gene in transgenic maize; however, further modification, i.e., to alter the emission spectra, would increase its utility. Received: 17 December 1997 / Revision received: 6 March 1998 / Accepted: 20 March 1998     

Atomic force microscopy differentiates discrete size distributions between membrane protein containing and empty nanolipoprotein particles

To better understand the incorporation of membrane proteins into discoidal nanolipoprotein particles (NLPs) we have used atomic force microscopy (AFM) to image and analyze NLPs assembled in the presence of bacteriorhodopsin (bR), lipoprotein E4 n-terminal 22k fragment scaffold and DMPC lipid. The self-assembly process produced two distinct NLP populations: those containing inserted bR (bR-NLPs) and those that did not (empty-NLPs). The bR-NLPs were distinguishable from empty-NLPs by an average increase in height of 1.0 nm as measured by AFM. Streptavidin binding to biotinylated bR confirmed that the original 1.0 nm height increase corresponds to br-NLP incorporation. AFM and ion mobility spectrometry (IMS) measurements suggest that NLP size did not vary around a single mean but instead there were several subpopulations, which were separated by discrete diameters. Interestingly, when bR was present during assembly the diameter distribution was shifted to larger particles and the larger particles had a greater likelihood of containing bR than smaller particles, suggesting that membrane proteins alter the mechanism of NLP assembly.     

Monitoring of conformational change in maltose binding protein using split green fluorescent protein

In this study, we describe a novel method for the detection of conformational changes in proteins, which is predicated on the reconstitution of split green fluorescent protein (GFP). We employed fluorescence complementation assays for the monitoring of the conformationally altered proteins. In particular, we used maltose binding protein (MBP) as a model protein, as MBP undergoes a characteristic hinge-twist movement upon substrate binding. The common feature of this approach is that GFP, as a reporter protein, splits into two non-fluorescent fragments, which are genetically fused to the N- and C-termini of MBP. Upon binding to maltose, the chromophores move closer together, resulting in the generation of fluorescence. This split GFP method also involves the reconstitution of GFP, which is determined via observations of the degree to which fluorescence intensity is restored. As a result, reconstituted GFP has been observed to generate fluorescence upon maltose binding in vitro, thereby allowing for the direct detection of changes in fluorescence intensity in response to maltose, in a concentration- and time-dependent fashion. Our findings showed that the fluorescence complementation assay can be used to monitor the conformational alterations of a target protein, and this ability may prove useful in a number of scientific and medical applications.     

ER retention may play a role in sorting of the nuclear pore membrane protein POM121

Integral membrane proteins of the nuclear envelope (NE) are synthesized on the rough endoplasmic reticulum (ER) and following free diffusion in the continuous ER/NE membrane system are targeted to their proper destinations due to interactions of specific domains with other components of the NE. By studying the intracellular distribution and dynamics of a deletion mutant of an integral membrane protein of the nuclear pores, POM121, which lacks the pore-targeting domain, we investigated if ER retention plays a role in sorting of integral membrane proteins to the nuclear envelope. A nascent membrane protein lacking sorting determinants is believed to diffuse laterally in the continuous ER/NE lipid bilayer and expected to follow vesicular traffic to the plasma membrane. The GFP-tagged deletion mutant, POM121(1-129)-GFP, specifically distributed within the ER membrane, but was completely absent from the Golgi compartment and the plasma membrane. Experiments using fluorescence recovery after photobleaching (FRAP) and fluorescence loss in photobleaching (FLIP) demonstrated that despite having very high mobility within the whole ER network (D = 0.41 +/- 0.11 micro m(2)/s) POM121(1-129)-GFP was unable to exit the ER. It was also not detected in post-ER compartments of cells incubated at 15 degrees C. Taken together, these experiments show that amino acids 1-129 of POM121 are able to retain GFP in the ER membrane and suggest that this retention occurs by a direct mechanism rather than by a retrieval mechanism. Our data suggest that ER retention might be important for sorting of POM121 to the nuclear pores.     

Pulling single bacteriorhodopsin out of a membrane: Comparison of simulation and experiment

Mechanical unfolding of single bacteriorhodopsins from a membrane bilayer is studied using molecular dynamics simulations. The initial conformation of the lipid membrane is determined through all-atom simulations and then its coarse-grained representation is used in the studies of stretching. A Go-like model with a realistic contact map and with Lennard-Jones contact interactions is applied to model the protein-membrane system. The model qualitatively reproduces the experimentally observed differences between force-extension patterns obtained on bacteriorhodopsin at different temperatures and predicts a lack of symmetry in the choice of the terminus to pull by. It also illustrates the decisive role of the interactions of the protein with the membrane in determining the force pattern and thus the stability of transmembrane proteins.     

融合牛肠激酶轻链EKL包涵体蛋白的复性纯化

大肠杆菌高密度发酵表达肠激酶轻链融合蛋白DsbA-rEKL,主要以包涵体形式存在。包涵体经4mol/L尿素和0.5%TritonX-100洗涤,以6mol/L盐酸胍、100mmol/LDTT溶解,在胱氨酸存在下,以脉冲加样方式复性。融合蛋白复性在6mmol/L胱氨酸存在下、脉冲加量0.03mg/mL和复性终蛋白浓度0.3mg/mL为最佳复性方案。复性的融合蛋白加2mmol/LCaCL2后快速自切。经IDA-Sepharose及Q-Sepharose纯化,rEKL纯度可达95%以上,可高效酶切重组瑞特普酶融合蛋白Trx-rPA。实现了大规模生产rEKL,每升发酵液经复性及纯化后,可得rEKL60mg/L以上,使以融合蛋白表达rPA等药用蛋白成为现实。     

Azo dye decolorization by a laccase/mediator system in a membrane reactor: enzyme and mediator reusability

This paper presents the use of a membrane-integrated reactor system with recycling of laccase and mediator for azo dye decolorization. From initial screening of different laccases and mediators, Trametes versicolor laccase and syringaldehyde provided the best system for decolorization. Decolorization yields of 98, 88, 80 and 78% were obtained for Red FN-2BL, Red BWS, Remazol Blue RR and Blue 4BL, respectively. The reaction parameters were optimized and a membrane reactor was set up for dye decolorization in batch mode with reuse of the enzyme. Between 10 and 20 batches could be run with decolorization yields from 95 to 52% depending on the dye type. To study the possibility of reusing both enzyme and mediator, the reactor was run using 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO) coupled to polyethylene glycol (PEG). Nine batches were run for the treatment of Remazol Blue RR, providing decolorization yields of 96-78%. Cost analysis of the processes showed that the costs of laccase/syringaldehyde or laccase/TEMPO were almost equal when running 20 batches, but the cost for the PEG-TEMPO was higher. However, the advantages associated with reuse of the mediator should motivate further development of the concept.     

Displacement current on purple membrane fragments oriented in a suspension

The displacement current is measured in a suspension of electric field-oriented purple membranes isolated from Halobacterium halobium, the photocycle being driven by a light flash. A simple quantitative theory of the method is presented and used to evaluate the distances the protons move during their way through the bacteriorhodopsin molecules. A lower limit of the velocity of proton movement is also given.     

A packed bed membrane reactor for production of biodiesel using activated carbon supported catalyst

In this study, a novel continuous reactor has been developed to produce high quality methyl esters (biodiesel) from palm oil. A microporous TiO₂/Al₂O₃ membrane was packed with potassium hydroxide catalyst supported on palm shell activated carbon. The central composite design (CCD) of response surface methodology (RSM) was employed to investigate the effects of reaction temperature, catalyst amount and cross flow circulation velocity on the production of biodiesel in the packed bed membrane reactor. The highest conversion of palm oil to biodiesel in the reactor was obtained at 70 °C employing 157.04 g catalyst per unit volume of the reactor and 0.21 cm/s cross flow circulation velocity. The physical and chemical properties of the produced biodiesel were determined and compared with the standard specifications. High quality palm oil biodiesel was produced by combination of heterogeneous alkali transesterification and separation processes in the packed bed membrane reactor.