Coupling of iminodiacetic acid with amino acid derivatives in solution and solid phase

The IR studies for the preactivation step of N-protected iminodiacetic acid with different coupling reagents (TCFH,TFFH, HATU, HBTU, HSTU) were reported here and showed theformation of an anhydride as an active intermediate in caseof TCFH and TFFH. The formation of a mixture of an anhydrideand an active ester (–OBt, –OAt or –OSu) were observed forHBTU, HATU or HSTU coupling reagent. Dependent on the couplingconditions, acylation of N-protected iminodiacetic acid with amino acid ester or amide derivatives in solution phase gavemono- or di-substituted iminodiacetic acid derivatives. Couplingof N-protected iminodiacetic acid with an amino acid or peptideattached to a solid support (PAL-PEG-PS or Wang resin) gave onlythe monosubstituted iminodiacetic acid derivatives.     

Practical protocols for stepwise solid-phase synthesis of cysteine-containing peptides.

This study details a series of conditions that may be applied to ensure 'safe' incorporation of cysteine with minimal racemization during automated or manual solid-phase peptide synthesis. Earlier studies from our laboratories [Han et al. (1997) J. Org. Chem. 62, 4307-4312] showed that several common coupling methods, including those exploiting in situ activating agents such as N-[(dimethylamino)-1H-1,2,3-triazolo[4,5-b]pyridin-1-ylmethylene]-N-methylmethanaminium hexafluorophosphate N-oxide (HATU), N-[1H-benzotriazol-1-yl)-(dimethylamino)methylene]-N-methylmethanaminium hexafluorophosphate N-oxide (HBTU), and (benzotriazol-1-yl-N-oxy)tris(dimethylamino)phosphonium hexafluorophosphate (BOP) [all in the presence of N-methylmorpholine (NMM) or N,N-diisopropylethylamine (DIEA) as a tertiary amine base], give rise to unacceptable levels (i.e. 5-33%) of cysteine racemization. As demonstrated on the tripeptide model H-Gly-Cys-Phe-NH(2), and on the nonapeptide dihydrooxytocin, the following methods are recommended: O-pentafluorophenyl (O-Pfp) ester in DMF; O-Pfp ester/1-hydroxybenzotriazole (HOBt) in DMF; N,N'-diisopropylcarbodiimide (DIPCDI)/HOBt in DMF; HBTU/HOBt/2,4,6-trimethylpyridine (TMP) in DMF (preactivation time 3.5-7.0 min in all of these cases); and HBTU/HOBt/TMP in CH(2)Cl(2)/DMF (1:1) with no preactivation. In fact, several of the aforementioned methods are now used routinely in our laboratory during the automated synthesis of analogs of the 58-residue protein bovine pancreatic trypsin inhibitor (BPTI). In addition, several highly hindered bases such as 2,6-dimethylpyridine (lutidine), 2,3,5,6-tetramethylpyridine (TEMP), octahydroacridine (OHA), and 2,6-di-tert-butyl-4-(dimethylamino)pyridine (DB[DMAP]) may be used in place of the usual DIEA or NMM to minimize cysteine racemization even with the in situ coupling protocols.     

A versatile synthetic route to chiral quinoxaline derivatives from amino acids precursors

Summary The synthesis ofN-protected L-amino acid (3-benzylquinoxalin-2-yl) hydrazide derivatives is reported here. 3-Benzyl-2-hydrazinoquinoxaline was prepared and then coupled withN-Boc-L-amino acids including; Alanine, Valine, Leucine, Phenylalanine, Tyrosine, Serine and Proline in the presence of HBTU as a coupling reagent to provide the expected product with high yield and purity. The products were deprotected by p-toluenesulphonic acid in acetonitrile and then the tosylate salts were evaluated for antibacterial and antifungal activity. Abbreviations: HBTU, N-[(1H-benzotriazol-1-yl)(dimethylamino)methylene]-N-methylmethanaminium hexafluorophosphate N-oxide Boc,t-butyloxycarbonyl, DIEA, diisopropylethylamine; DMF, N,N-dimethylformamide; PTSA, p-toluenesulphonic acid, TEA, triethyl amine. Amino acids are abbreviated and designated following the rules of the IUPAC-IUB Commission of BiochemicalNomenclature (J. Biol. Chem., 247 (1972) 977).     

Addition of HOXt (X = A or B) improves the efficiency of phenol-based coupling reagents during peptide synthesis

Summary In the course of comparing the effectiveness of HATU, HBTU, and phenol-based coupling reagents, such as the pentafluorophenyl, 2-nitrophenyl, and 2,4,5-trichlorophenyl uronium salts by (a) formation of Fmoc-Ala-Val-OtBu, (b) (2+1) segment coupling and (c) stepwise solid phase peptide assembly of typical model peptides such as the pentapeptide H-Tyr-Aib-Aib-Phe-Leu-NH₂ and ACP decapeptide (65–74), we found a striking improvement of the less effective phenol-based coupling reagents (HPyOPfp, HPyONp, and HPyOTcp), both with regard to reaction rate and extent of epimerization, when HOAt was added and a clear superiority of HAPyU (in the presence and absence of HOAt) relative to the compounds derived from HOBt, HOPfp, HONp, and HOTcp. Abbreviations: Aib, α-aminoisobutyric acid; DIEA, diisopropylethylamine; TMP, collidine, 2,4,6,-tri-methylpyridine; DMF, N, N-dimethylformamide; HOBt, 1-hydroxybenzotriazole; HOAt, 7-aza-1-hydroxybenzotriazole; HAPyU, 1-(1-pyrrolidinyl-1H-1,2,3-triazolo[4,5-b]pyridin-1-ylmethylene)-N-methylmethanaminium hexafluorophosphate N-oxide; HOPfp, pentafluorophenol; HONp, 2-nitrophenol; HOTcp, 2,4,5-trichlorophenol; HPyOPfp,bis(tetramethylene)pentafluorophenoxyformamidinium hexafluorophosphate; HpyONp,bis(tetramethylene)-2-nitrophenoxyformamidinium hexafluorophosphate; HPyOTcp,bis(tetramethylene)-2,4,5-trichlorophenoxyformamidinium hexafluorophosphate; BTCFHbis(tetramethylene)chloroformamidinium hexafluororophosphate. Amino acids and peptides are abbreviated and designated following the rules of the IUPAC-IUB Commission of Biochemical Nomenclature [J. Biol. Chem., 247 (1972) 977]     

Nα-Fmoc-O,O-(dimethylphospho)-L-tyrosine fluoride: A convenient building block for the solid-phase synthesis of phosphotyrosyl peptides

Summary Fmoc-O,O-(dimethylphospho)-l-tyrosine was converted into stable Fmoc-O,O-(dimethylphospho)-L-tyrosine fluoride by means of (diethylamino) sulfur trifluoride or cyanuric fluoride. This building block was used for efficient coupling of phosphotyrosine to the adjacent sterically hindered amino acid Aib or Ac₆c in, model peptide sequences as well as for the synthesis of the ‘difficult’ phosphotyrosine peptide Stat91^695–708. The phosphate methyl groups were cleaved on solid phase after peptide assembly by means of trimethylsilyl iodide in MeCN. Aib, α-aminoisobutyric acid Ac₆c, 1-amino-cyclohexyl-l-carboxylic acid; BOP, benzotriazol-l-yl-oxy-tris(dimethylamino) phosphonium hexafluorophosphate, CIP, 2-chloro-l, 3-dimethylimidazolidium hexafluorophosphate, DAST, (diethylamino)sulfur trifluoride; DBU 1,8-diazabicyclo[5.4.0]undec-7-ene; DCM, dichloromethane; DIEA, drisopropylethylamine; DMA dimethylacetamide; Fmoc, 9-fluorenylmethoxycarbonyl; HATU,O-(7-azabenzotriazol-l-yl)-1.1,3,3-tetramethyluronium hexafluorophosphate; HOAt, I-hydroxy-7-azabenzotriazole; HOBt,N-hydroxybenzotriazole; HPLC, high-performance liquid chromatography; MBHA, 4-methylbenzhydrylamine; MeCN, acetonitrile; NMP,N-methyl-2-pyrrolidinone; NMR, nuerear magnetic resonance; PS, polystyrene; PyBroP, bromotris(pyrrolidino)phosphonium hexafluorophosphate; Rink amide MBHA-PS, 4-(2′,4′-dimethoxyphenyl-Fmoc-aminophenyl)-phenoxyacetamido-norleucyl-MBHA-PS; TFA, trifluoroacetic acid; TMSI, trimethylsilyl iodide; TPTU, 2-(2-pyridon-l-yl)-1,1,3,3-tetramethyluroniumfluoroborate; t_R, retention time; UNCA, arethane-protected amino acidN-carboxy anhydride Abbreviations for amino acids and nomenclature of, peptide structures follow the recommendations of the IUPAC-IUB Commission on Biochemical Nomenclature [Eur. J. Biochem., 138 (1984) 9].     

Evaluation of coupling conditions for the incorporation of Nα-Fmoc-Tyr(PO3H2)-OH in solid-phase peptide synthesis

Summary In order to minimise the formation of the pyrophosphate derivative of the target peptide when side-chain-unprotected phopshotyrosine is used in solid-phase peptide synthesis, this building block can be incorporated using benzotriazolyloxy-tris-(dimethylamino)phosphonium hexafluorophosphate/1-hydroxybenzotriazole/N-methylmorpholine (1:1:2.3) in the presence of a chaotropic salt (0.4 M LiCl in N-methyl-2-pyrrolidinone).Abbreviations BOP benzotriazolyloxy-tris-(dimethylamino)phosphonium hexafluorophosphate - DIEA diisopropylethylamine - Fmoc 9-fluorenylmethoxycarbony - HATU N-[(dimethylamino)1H-1,2,3-triazolo[4,5-b]pyridin-1-ylmethylene]-N-methylmethan-aminium hexafluorophosphate N-oxide - HOBt 1-hydroxybenzotriazole - HPLC high-performance liquid chromatography - MALDI-TOF matrix-assisted laser-desorption ionization time-of-flight mass spectrometry - NMM N-methylmorpholine - NMP N-methyl-2-pyrrolidinone - Pmc 2,2,5,7,8-pentamethyl-chroman-6-sulfonyl - ® solid support - TFA trifluoroacetic acid - TPTU 2-(2-pyridon-1-yl)-1,1,3,3-tetramethyluroniumfluoroborate. Abbreviations used for amino acids follow the recommendations of the IUPAC-IUB Commission of Biochemical Nomenclature [Eur. J. Biochem., 138 (1984) 9]     

Derivatives of Aminoquinones with N-protected Amino Acids

Summary The synthesis of derivatives of aminoquinones with N-protected amino acids is reported here. 2-Amino-1,4-benzoquinone and 2-amino-1,4-naphthoquinone, prepared by the azide method in yields of 60 and 95% respectively, were coupled with N-Boc-protected amino acids including glycine, serine, proline and tyrosine, to give the correspondening derivatives.N, N′-Diisopropylcarbodiimide/1-hydroxybenzotriazole orN, N′-dicyclohexylcarbodiimide/HOBt used as coupling reagents provided the expected products in satisfactory yields and purities as supported by TLC, HPLC and spectral analysis.     

Efficient solid-phase synthesis of a large peptide by a single coupling protocol with a single HPLC purification step

Peptide chain assembly is now routinely performed by the use of automated synthesizers, although purification and characterization of large peptides still requires knowledge and experience. Structural biology has recently become closely involved in molecular recognition studies that often require the analysis of relatively large peptides using high-resolution NMR spectroscopy, for which synthesis of high-quality peptides in 5–10 mg amounts is of prime importance. The present study describes a solid-phase synthesis of a 7 kDa peptide related to the recently characterized ethylene-responsive element binding protein of tobacco, which is the conserved sequence among these proteins. The rapid and efficient preparation was carried out through a single coupling in combination with a single HPLC separation step. Assembly was performed in 63 h. Different coupling chemistries were employed and compared, involving benzotriazol-1-yloxy-tris(pyrrolidino)phosphonium hexafluorophosphate, 1-hydroxy-7-azabenzotriazole and/or the recently introduced reagent, N-[(dimethylamino)-1H-1,2,3-triazolo[4,5-b]pyridin-1-ylmethylene]-N-methylmethanaminium hexafluorophosphate N-oxide. After each synthesis, purified material was characterized by mass spectrometry, sequencing and enzymatic mapping and shown to contain a high proportion of the desired peptide.     

Synthesis of peptides containing α,β-didehydroamino acids. Scope and limitations

Summary α, β-Didehydroamino acids, which are key components of both natural andde novo peptides, are frequently encountered in naturally occurring peptides — mostly of microbial and fungal origin and/or from marine organisms. Herein, we report on a reappraisal of the use of the water-soluble carbodiimide/CuCl method for the preparation of this kind of peptide in both solution and solid-phase modes and describe some side reactions encountered during the process. Abbreviations: Alloc, allyloxycarbonyl; Barlos resin, 2-chlorotrityl chloride resin, Boc,tert-butoxycarbonyl; Boc₂O, di-tert-butyl dicarbonate; Bzl, benzyl; DABCO, 1,4-diazabicyclo[2.2.2]octane; DAST, (diethylamino)sulfur trifluoride; DBU, 1,8-diazabicyclo[5.4.0]undec-7-ene; DDAAs, α, β-didehydroarnino acids; DEAD, diethyl azodicarboxylate; Dha, Didehydroalanine, (Z)-Dhb, Z-Didebydroaminobutyric acid; (Z)-Dhp, Z-Didehydrophenylalanine; DSC, disuccinimidyl carbonate; DDP, α, β-didehydropeptides; EDC, WSC, 3-(3′-dimethylaminopropyl)-1-ethylearbodiimide; Fmoc, fiuorenylmethoxycarbonyl; HATU, N-{(dimethylamino)-1H-1,2,3-triazolo[4,5-b]pyridino-1-ylmethylene}-N-methylmethanaminium hexafluorophosphate; HOAt, 1-hydroxy-7-azabenzotriazole; (β-OH)Phe, phenylserine or β-hydroxyphenylalanine; Ph₃P, triphenylphosphine; PyAOP, (7-azabenzotriazol-1-yloxy)-tris(pyrrolidino)phosphonium hexafluorophosphate; TEA, triethylamine; TFA, trifluoroacetic acid. Amino acid symbols denote thel-configuration unless stated otherwise. All solvent ratios are volume/volume unless stated otherwise.     

Structural studies of reagents for peptide bond formation: Crystal and molecular structures of HBTU and HATU

Summary X-ray structure determinations of HBTU and HATU, well-known reagents for peptide bond formation, show that the solid-state structures of these compounds differ markedly from those commonly presented in the literature. The solid-state structures are isomers of the N,N,N',N'-tetramethyluronium salt formulation commonly written for HBTU and HATU. HBTU and HATU, obtained either directly from synthesis or from CH₃CN solution, crystallize as the guanidinium N-oxide isomers. Both compounds crystallize in nearly identical conformations, despite marked differences in crystal packing.     

Characterization of synthetic peptide byproducts from cyclization reactions using on-line HPLC-ion spray and tandem mass spectrometry

Summary The cyclization of a linear dynorphin A (Dyn A) analogue to give the lactam derivative cyclo[d-Asp², Dap⁵]Dyn A(1–13)NH₂ (where Dap=,-diaminopropionic acid) was studied to evaluate the usefulness of different coupling reagents for side chain to side chain lactam formation. This cyclization proved to be difficult and yielded substantial byproducts that varied depending upon the activating reagent used. On-line HPLC-ion spray mass spectrometry was more practical and useful than conventional HPLC alone for characterizing the products of these cyclization reactions. Peptide byproducts could be identified from the series of multiply charged ions observed, even when some of these peptides eluted from the HPLC with similar retention times. In addition to the desired cyclic peptide, the peptide byproducts observed following the cyclization using BOP (benzotriazol-1-yl-oxy-tris(dimethylamino)phosphonium hexafluorophosphate) were the linear peptide, the cyclic dimeric peptide and the linear peptide resulting from aspartimide rearrangement. The peptide byproducts obtained following cyclization using HATU (O-(7-azabenzotriazol-1-yl)-1,1,3,3-tetramethyluronium hexafluorophosphate) and HAPyU (O-(7-azabenzotriazol-1-yl)-1,1,3,3-bis(tetramethylene)uronium hexafluorophosphate) were predominantly linear tetramethylguanidinium (Tmg) and dipyrrolidinylguanidinium (Dpg) derivatives resulting from alkylation of the side chain of Dap by HATU and HAPyU, respectively; in addition to monomeric guanidinium derivatives, dimeric and aspartimide-containing peptides were also produced. Peptide sequencing by ion spray tandem mass spectrometry was performed to confirm the structure of both pure peptides and peptide byproducts in the crude samples. A unique fragmentation for the ,-bond of the Dap side chain was demonstrated and could be used to identify linear peptide byproducts. The distinctive fragment ions from this cleavage were also observed for the peptides containing the Tmg and Dpg functionalities on the Dap side chain.     

Synthesis,antioxidative and antiviral activity of hydroxycinnamic acid amides of thiazole containing amino acid

The synthesis and the biological (antioxidant and antiviral) activities of novel hydroxycinnamic acid amides of a thiazole containing TFA.valine-4-carboxylic acid ethyl ester are reported. The amides have been synthesized from p-coumaric, ferulic and sinapic acids with the corresponding TFA.valine-thiazole-4-carboxylic acid ethyl ester using the coupling reagent N-ethyl-N′-(3-dimethylaminopropyl) carbodiimide hydrochloride (EDC) and 4-(dimethylamino) pyridine (DMAP) as a catalyst. The antioxidant properties of the newly synthesized amides have been studied for then antioxidative activity using 2,2-diphenyl-1-picrylhydrazyl (DPPH)* test. The newly synthesized compounds have been tested against the replication in vitro of influenza virus A (H3N2) and human herpes virus 1 and 2 (HSV-1 and HSV-2).     

Synthesis of phosphopeptides by the Multipinast method: Evaluation of coupling methods for the incorporation of Fmoc- Tyr(PO3Bzl,H)-OH,Fmoc- Ser(PO3Bzl,H)-OH and Fmoc- Thr(PO3Bzl,H)-OH

Summary The efficiency of various coupling methods for the incorporation of the three monobenzyl phosphorodiesterprotected derivatives, Fmoc-Tyr(PO₃Bzl,H)-OH, Fmoc-Ser(PO₃Bzl,H)-OH and Fmoc-Thr(PO₃Bzl,H)-OH, was examined through the test synthesis of Ala-Ser-Gln-Gly-Xxx(PO₃H₂)-Leu-Glu-Asp-Pro-Ala-NH₂ (Xxx=Tyr, Ser, Thr) using the Multipin method of multiple peptide synthesis. The coupling methods examined were (1) PyBrop/DIEA; (2) BOP/HOBt/NMM; (3) BOP/HOBt/DIEA; (4) HBTU/HOBt/DIEA; (5) HATU/HOAt/DIEA; (6) HATU/DIEA; (7) DIC/HOBt; (8) DIC/HOBt/DIEA; (9)DIC/HOAt; (10) DIC/HOAt/DIEA. While all four DIC-based coupling procedures resulted in incomplete incorporation, both the HBTU/HOBt/DIEA and HATU/HOAt/DIEA coupling procedures provided most efficient incorporation of the three Fmoc-Xxx (PO₃Bzl,H)-OH derivatives. In the subsequent synthesis of the α-helical Tyr(P)-peptide, Glu-Thr-Gly-The-Lys-Ala-Glu-Leu-Leu-Ala-Lys-Tyr(PO₃H₂)-Glu-Ala-Thr-His-Lys-NH₂, analysis of the crude peptide by electrospray MS confirmed that several residue deletions had occurred but that complete incorporation of the Tyr(P)-residue had been accomplished using HBTU/HOBt/DIEA coupling of Fmoc-Tyr(PO₃Bzl,H)-OH. Multipin is a trademark of Chiron Technologies Pty. Ltd., Clayton, Victoria, Australia.     

Multiple oligodeoxyribonucleotide syntheseson a reusable solid-phase CPG support via the hydroquinone-O,O'-diacetic acid (Q-Linker) linker arm

A strategy for oligodeoxyribonucleotide synthesis on a reusable CPG solid-phase support, derivatized with hydroxyl groups instead of amino groups, has been developed. Ester linkages, through a base labile hydroquinone- O, O '-diacetic acid ( Q-Linker ) linker arm, were used to couple the first nucleoside to the hydroxyl groups on the support. This coupling was rapidly accomplished (10 min) using O -benzotriazol-1-yl- N, N, N ', N '-tetramethyluronium hexafluorophosphate (HBTU) and 1-hydroxybenzotriazole as the activating reagents. Oligodeoxyribonucleotide synthesis was performed using existing procedures and reagents, except a more labile capping reagent, such as chloro-acetic anhydride, methoxyacetic anhydride or t-butylphenoxyacetic anhydride, was used instead of acetic anhydride. After each oligodeoxyribonucleotide synthesis, the product was cleaved from the support with ammonium hydroxide (3 min) and deprotected as usual. Residual linker arms or capping groups were removed by treatment with ammonium hydroxide/methylamine reagent and the regenerated support was capable of reuse. Up to six different oligodeoxyribonucleotide syntheses or up to 25 cycles of nucleoside derivatization and cleavage were consecutively performed on the reusable support. This method may provide a significant cost advantage over conventional single-use solid supports currently used for the manufacture of antisense oligodeoxyribonucleotides.     

3-(1-Piperidinyl)alanine formation during the preparation ofC-terminal cysteine peptides with the Fmoc/t-Bu strategy

Summary Several side reactions have been detected for cysteine-containing peptides. During the synthesis ofC-terminal cysteine peptides, a base-catalyzed elimination of the sulfhydryl-protected side-chain to afford the dehydroalanine derivative followed by a nucleophilic addition to the alkene was observed. MALDI-TOF analysis was a useful analytical technique to determine this phenomenon.Abbreviations Acm acetamidomethyl - Boc tert-butyloxycarbonyl - t-Bu tert-butyl - DBU 1,8-diazabicyclo[5.4.0]undec-7-ene - DIEA N,N-diisopropylethylamine - DMF N,N-dimethylformamide - Fmoc 9-fluorenylmethyloxycarbonyl - HATU N-[(dimethylamino)-1H-1,2,3-triazolo[4,5-b]pyridin-1-yl-methylene]-N-methylmethanaminium hexafluorophosphateN-oxide - HBTU N-[(1H-benzotriazol-1-yl)(dimethylamino)methylene]-N-methylmethanaminium hexafluorophosphateN-oxide - HOAt 1-hydroxy-7-azabenzotriazole - HOBt 1-hydroxybenzotriazole - HPLC high-performance liquid chromatography - MALDI-TOF matrix-assisted laser desorption/ionization time-of-flight mass spectrometry - PAC 4-hydroxymethylphenoxyacetic acid handle - PAL 5-(4-(9-fluorenylmethyloxycarbonyl)aminomethyl-3,5-dimethoxy-phenoxy)valeric acid handle - PEG-PS polyethylene glycol-polystyrene graft supports - PS polystyrene - Reagent R TFA/thioanisole/1,2-ethanedithiol/anisole (90:5:3:2) - S-t-Bu S-tert-butyl mercapto - TFA trifluoroacetic acid - Trt triphenylmethyl. Amino acid symbols denote thel-configuration, unless indicated otherwise     

Synthesis of phosphopeptides by the Multipinast method: Evaluation of coupling methods for the incorporation of Fmoc- Tyr(PO3Bzl,H)-OH, Fmoc- Ser(PO3Bzl,H)-OH and Fmoc- Thr(PO3Bzl,H)-OH

astMultipin is a trademark of Chiron Technologies Pty. Ltd., Clayton, Victoria, Australia.The efficiency of various coupling methods for the incorporation of the three monobenzyl phosphorodiester-protected derivatives, Fmoc- Tyr(PO3Bzl,H)-OH, Fmoc-Ser(PO3Bzl,H)-OH and Fmoc-Thr(PO3Bzl,H)-OH, was examined through the test synthesis of Ala-Ser-Gln-Gly-Xxx(PO3H2)-Leu- Glu-Asp-Pro-Ala-NH2 (Xxx = Tyr, Ser, Thr) using the Multipin method of multiple peptide synthesis. The coupling methods examined were (1) PyBrop/DIEA; (2) BOP/HOBt/NMM; (3) BOP/HOBt/DIEA; (4) HBTU/HOBt/DIEA; (5) HATU/HOAt/DIEA; (6) HATU/DIEA; (7) DIC/HOBt; (8) DIC/HOBt/DIEA; (9) DIC/HOAt; (10) DIC/HOAt/DIEA. While all four DIC-based coupling procedures resulted in incomplete incorporation, both the HBTU/HOBt/DIEA and HATU/HOAt/DIEA coupling procedures provided most efficient incorporation of the three Fmoc- Xxx(PO3Bzl,H)-OH derivatives. In the subsequent synthesis of the -helical Tyr(P)-peptide, Glu-Thr-Gly-The-Lys- Ala-Glu-Leu-Leu-Ala-Lys-Tyr(PO3H2)-Glu-Ala-Thr- His-Lys-NH2, analysis of the crude peptide by electrospray MS confirmed that several residue deletions had occurred but that complete incorporation of the Tyr(P)-residue had been accomplished using HBTU/HOBt/DIEA coupling of Fmoc- Tyr(PO3Bzl,H)-OH.     

Microwave‐assisted solid‐phase peptide synthesis of neurosecretory protein GL composed of 80 amino acid residues

We recently identified a novel cDNA encoding a small secretory protein of 80 amino acid residues, termed neurosecretory protein GL (NPGL), from the chicken hypothalamus. Homologs of NPGL have been reported to be present in mammals, such as human and rat. NPGL is amidated at its C‐terminus, contains an intramolecular disulfide bond, and is hydrophobic in nature. In this study, we have optimized the synthesis of the entire 80‐amino acid peptide sequence of rat NPGL by microwave‐assisted solid‐phase peptide synthesis. NPGL was obtained with a 10% yield when the coupling reactions were performed using 1‐[Bis(dimethylamino)methylene]‐1H‐1,2,3‐triazolo[4,5‐b]pyridinium‐3‐oxid hexafluorophosphate (HATU) at 50 °C for 5 min, and Fmoc deprotections were performed using 40% piperidine containing 0.1 M HOBt. Furthermore, the disulfide bond of NPGL was formed with 20% yield with the use of glutathione‐containing redox buffer and 50% acetonitrile. Copyright © 2015 European Peptide Society and John Wiley & Sons, Ltd.     

A method for the facile solid-phase synthesis of gramicidin S and its analogs

Summary A simple method is described for the facile synthesis of gramicidin S and six other analogs, using standard solidphase synthetic technology and a single solution-phase cyclization step. The peptides were purified to homogeneity and characterized by plasma desorption time-of-flight mass spectrometry and NMR spectroscopy. Complete ¹H NMR assignments for all seven peptides (in aqueous solution) are presented. Unlike previous approaches, the presented method is simple, automatable, rapid (less than three days), high-yielding, requires no side-chain protection during cyclization, and appears to be generally applicable to the preparation of a variety of related head-to-tail cyclic peptides.Abbreviations Boc t-butyloxycarbonyl - BOP benzotriazoyl N-oxytris(dimethylamino)phosphonium hexafluorophosphate - Bzl benzyl - DCC N,N-dicyclohexylcarbodiimide - DCM dichloromethane - DIEA N,N-diisopropylethylamine - DMF N,N-dimethylformamide - DQF-COSY double-quantum-filtered correlation spectroscopy - DSS 2,2-dimethyl-2-silapentane-5-sulfonate, sodium salt - EDAC 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide - HBTU 2-(1H-benzotriazol-1-yl)-1,1,3,3-tetramethyl uronium hexafluorophosphate - HOBt 1-hydroxybenzotriazole - 4-MeBzl 4-methylbenzyl - NHS N-hydroxysuccinimide - NOESY nuclear Overhauser effect spectroscopy - PAM phenylacetamidomethyl (resin) - RP-HPLC reversed-phase high-performance liquid chromatography - TFA trifluoroacetic acid - TOCSY total correlation spectroscopy - Tos tosyl - Troc 2,2,2-trichloroethylcarbamate.     

Comparative study of methods to couple hindered peptides.

A comparative study of modern coupling reactions involving Boc-protected amino acid derivatives and dipeptides with N-terminal alpha,alpha-dialkylation and N-methylation was carried out. The coupling reactions were run using either equimolar amounts of the amino and activated carboxyl components or an excess of the activated carboxyl component. Yields of the target tripeptide Boc-Phe-Xaa-Phe-OBzl (Xaa = (NMe)Ala, (NMe)Aib, or (NMe) alpha Ac5c) were compared. Less than 10% of the product was obtained from methods utilizing pivaloyl mixed anhydride, pentafluorophenyl ester or acyl fluoride activation when Xaa = (NMe)Aib and (NMe) alpha Ac5c. At room temperature, significant yields of these two products were obtained from reactions which utilized an excess of the HBTU reagent (O-benzotriazol-1-yl-N,N,N',N'-tetramethyluronium hexafluorophosphate), the PyBroP reagent (bromo-tris-pyrrolidino-phosphonium hexafluorophosphate) or Boc-Phe-NCA (Boc-protected phenylalanine N-carboxyanhydride). Moreover, the Boc-Phe-NCA method was superior when used over a prolonged reaction time or at elevated temperature.