Characterization of the W321F mutant of Mycobacterium tuberculosis catalase–peroxidase KatG

A single amino acid mutation (W321F) in Mycobacterium tuberculosis catalase-peroxidase (KatG) was constructed by site-directed mutagenesis. The purified mutant enzyme was characterized using optical and electron paramagnetic resonance spectroscopy, and optical stopped-flow spectrophotometry. Reaction of KatG(W321F) with 3-chloroperoxybenzoic acid, peroxyacetic acid, or t-butylhydroperoxide showed formation of an unstable intermediate assigned as Compound I (oxyferryl iron:porphyrin pi-cation radical) by similarity to wild-type KatG, although second-order rate constants were significantly lower in the mutant for each peroxide tested. No evidence for Compound II was detected during the spontaneous or substrate-accelerated decay of Compound I. The binding of isoniazid, a first-line anti-tuberculosis pro-drug activated by catalase-peroxidase, was noncooperative and threefold weaker in KatG(W321F) compared with wild-type enzyme. An EPR signal assigned to a protein-based radical tentatively assigned as tyrosyl radical in wild-type KatG, was also observed in the mutant upon reaction of the resting enzyme with alkyl peroxide. These results show that mutation of residue W321 in KatG does not lead to a major alteration in the identity of intermediates formed in the catalytic cycle of the enzyme in the time regimes examined here, and show that this residue is not the site of stabilization of a radical as might be expected based on homology to yeast cytochrome c peroxidase. Furthermore, W321 is indicated to be important in KatG for substrate binding and subunit interactions within the dimer, providing insights into the origin of isoniazid resistance in clinically isolated KatG mutants.     

Resonance Raman spectroscopy of Compound II and its decay in Mycobacterium tuberculosis catalase-peroxidase KatG and its isoniazid resistant mutant S315T

The reaction of Mycobacterium tuberculosis KatG and the mutant KatG(S315T) with two different organic peroxides is studied using resonance Raman spectroscopy. For the first time, an intermediate is observed in a catalase-peroxidase with vibrations that are characteristic of Compound II. The observation of this intermediate is consistent with photoreduction of Compound I and is in agreement with the formation of Compound I during the catalytic cycle of KatG. The same intermediate is detected in KatG(S315T), a mutant associated with resistance to isoniazid (INH), but with a lower yield, indicating that the organic peroxides cannot react with the heme iron in KatG(S315T) as efficiently as in wild-type KatG. Our results are consistent with catalytic competence of the S315T mutant and support the model that the S315T mutation confers antibiotic resistance by modifying the interaction between the enzyme and the drug.     

Analysis of heme structural heterogeneity in Mycobacterium tuberculosis catalase-peroxidase (KatG)

Mycobacterium tuberculosis catalase-peroxidase (KatG) is a heme enzyme considered important for virulence, which is also responsible for activation of the anti-tuberculosis pro-drug isoniazid. Here, we present an analysis of heterogeneity in KatG heme structure using optical, resonance Raman, and EPR spectroscopy. Examination of ferric KatG under a variety of conditions, including enzyme in the presence of fluoride, chloride, or isoniazid, and at different stages during purification in different buffers allowed for assignment of spectral features to both five- and six-coordinate heme. Five-coordinate heme is suggested to be representative of "native" enzyme, since this species was predominant in the enzyme examined immediately after one chromatographic protocol. Quantum mechanically mixed spin heme is the most abundant form in such partially purified enzyme. Reduction and reoxidation of six-coordinate KatG or the addition of glycerol or isoniazid restored five-coordinate heme iron, consistent with displacement of a weakly bound distal water molecule. The rate of formation of KatG Compound I is not retarded by the presence of six-coordinate heme either in wild-type KatG or in a mutant (KatG[Y155S]) associated with isoniazid resistance, which contains abundant six-coordinate heme. These results reveal a number of similarities and differences between KatG and other Class I peroxidases.     

Evidence for radical formation at Tyr-353 in Mycobacterium tuberculosis catalase-peroxidase (KatG)

Mycobacterium tuberculosis KatG is a heme-containing catalase-peroxidase responsible for activation, through its peroxidase cycle, of the front line antituberculosis antibiotic isoniazid (isonicotinic acid hydrazide). Formation of Compound I (oxyferryl heme-porphyrin pi-cation radical), the classical peroxidase intermediate generated when the resting enzyme turns over with alkyl peroxides, is rapidly followed by production of a protein-centered tyrosyl radical in this enzyme. In our efforts to identify the residue at which this radical is formed, nitric oxide was used as a radical scavenging reagent. Quenching of the tyrosyl radical generated in the presence of NO was shown using electron paramagnetic resonance spectroscopy, and formation of nitrotyrosine was confirmed by proteolytic digestion followed by high performance liquid chromatography analysis of the NO-treated enzyme. These results are consistent with formation of nitrosyltyrosine by addition of NO to tyrosyl radical and oxidation of this intermediate to nitrotyrosine. Two predominant nitrotyrosine-containing peptides were identified that were purified and sequenced by Edman degradation. Both peptides were derived from the same M. tuberculosis KatG sequence spanning residues 346-356 with the amino acid sequence SPAGAWQYTAK, and both peptides contained nitrotyrosine at residue 353. Some modification of Trp-351 most probably into nitrosotryptophan was also found in one of the two peptides. Control experiments using denatured KatG or carried out in the absence of peroxide did not produce nitrotyrosine. In the mutant enzyme KatG(Y353F), which was constructed using site-directed mutagenesis, a tyrosyl radical was also formed upon turnover with peroxide but in poor yield compared with wild-type KatG. Residue Tyr-353 is unique to M. tuberculosis KatG and may play a special role in the function of this enzyme.     

Hydrogen peroxide-mediated isoniazid activation catalyzed by Mycobacterium tuberculosis catalase-peroxidase (KatG) and its S315T mutant

Inhibition of the enzyme Mycobacterium tuberculosis InhA (enoyl-acyl carrier protein reductase) due to formation of an isonicotinoyl-NAD adduct (IN-NAD) from isoniazid (INH) and nicotinamide adenine dinucleotide cofactor is considered central to the mode of action of INH, a first-line treatment for tuberculosis infection. INH action against mycobacteria requires catalase-peroxidase (KatG) function, and IN-NAD adduct formation is catalyzed in vitro by M. tuberculosis KatG under a variety of conditions, yet a physiologically relevant approach to the process has not emerged that allows scrutiny of the mechanism and the origins of INH resistance in the most prevalent drug-resistant strain bearing KatG[S315T]. In this report, we describe how hydrogen peroxide, delivered at very low concentrations to ferric KatG, leads to efficient inhibition of InhA due to formation of the IN-NAD adduct. The rate of adduct formation mediated by wild-type KatG was about 20-fold greater than by the isoniazid-resistant KatG[S315T] mutant under optimal conditions (H2O2 supplied along with NAD+ and INH). Slow adduct formation also occurs starting with NADH and INH, in the presence of KatG even in the absence of added peroxide, due to endogenous peroxide. The poor efficiency of the KatG[S315T] mutant can be enhanced merely by increasing the concentration of INH, consistent with this enzyme's reduced affinity for INH binding to the resting enzyme and the catalytically competent enzyme intermediate (Compound I). Origins of drug resistance in the KatG[S315T] mutant enzyme are analyzed at the structural level through examination of the three-dimensional X-ray crystal structure of the mutant enzyme.     

Reduction of cytochrome c peroxidase compounds I and II by ferrocytochrome c. A stopped-flow kinetic investigation

The oxidation of yeast cytochrome c peroxidase by hydrogen peroxide produces a unique enzyme intermediate, cytochrome c peroxidase Compound I, in which the ferric heme iron has been oxidized to an oxyferryl state, Fe(IV), and an amino acid residue has been oxidized to a radical state. The reduction of cytochrome c peroxidase Compound I by horse heart ferrocytochrome c is biphasic in the presence of excess ferrocytochrome c as cytochrome c peroxidase Compound I is reduced to the native enzyme via a second enzyme intermediate, cytochrome c peroxidase Compound II. In the first phase of the reaction, the oxyferryl heme iron in Compound I is reduced to the ferric state producing Compound II which retains the amino acid free radical. The pseudo-first order rate constant for reduction of Compound I to Compound II increases with increasing cytochrome c concentration in a hyperbolic fashion. The limiting value at infinite cytochrome c concentration, which is attributed to the intracomplex electron transfer rate from ferrocytochrome c to the heme site in Compound I, is 450 +/- 20 s-1 at pH 7.5 and 25 degrees C. Ferricytochrome c inhibits the reaction in a competitive manner. The reduction of the free radical in Compound II is complex. At low cytochrome c peroxidase concentrations, the reduction rate is 5 +/- 3 s-1, independent of the ferrocytochrome c concentration. At higher peroxidase concentrations, a term proportional to the square of the Compound II concentration is involved in the reduction of the free radical. Reduction of Compound II is not inhibited by ferricytochrome c. The rates and equilibrium constant for the interconversion of the free radical and oxyferryl forms of Compound II have also been determined.     

Impact of distal side water and residue 315 on ligand binding to ferric Mycobacterium tuberculosis catalase-peroxidase (KatG)

The catalase-peroxidase (KatG) of Mycobacterium tuberculosis (Mtb) is important for the virulence of this pathogen and also is responsible for activation of isoniazid (INH), an antibiotic in use for over 50 years in the first line treatment against tuberculosis infection. Overexpressed Mtb KatG contains a heterogeneous population of heme species that present distinct spectroscopic properties and, as described here, functional properties. A six-coordinate (6-c) heme species that accumulates in the resting enzyme after purification is defined as a unique structure containing weakly associated water on the heme distal side. We present the unexpected finding that this form of the enzyme, generally present as a minority species along with five-coordinate (5-c) enzyme, is the favored reactant for ligand binding. The use of resting enzyme samples with different proportional composition of 5-c and 6-c forms, as well as the use of KatG mutants with replacements at residue 315 that have different tendencies to stabilize the 6-c form, allowed demonstration of more rapid cyanide binding and preferred peroxide binding to enzyme containing 6-c heme. Optical-stopped flow and equilibrium titrations of ferric KatG with potassium cyanide reveal complex behavior that depends in part on the amount of 6-c heme in the resting enzymes. Resonance Raman and low-temperature EPR spectroscopy clearly demonstrate favored ligand (cyanide or peroxide) binding to 6-c heme. The 5-c and 6-c enzyme forms are not in equilibrium on the time scale of the experiments. The results provide evidence for the likely participation of specific water molecule(s) in the first phases of the reaction mechanism of catalase-peroxidase enzymes.     

Prostaglandin H synthase and hydroperoxides: peroxidase reaction and inactivation kinetics

The reaction kinetics of the peroxidase activity of prostaglandin H synthase have been examined with 15-hydroperoxyeicosatetraenoic acid and hydrogen peroxide as substrates and tetramethylphenylenediamine as cosubstrate. The apparent Km and Vmax values for both hydroperoxides were found to increase linearly with the cosubstrate concentration. The overall reaction kinetics could be interpreted in terms of an initial reaction of the synthase with hydroperoxide to form an intermediate equivalent to horseradish peroxidase Compound I, followed by reduction of this intermediate by cosubstrate to regenerate the resting enzyme. The rate constants estimated for the generation of synthase Compound I were 7.1 X 10(7) M-1 s-1 with the lipid hydroperoxide and 9.1 X 10(4) M-1 s-1 with hydrogen peroxide. The rate constants estimated for the rate-determining step in the regeneration of resting enzyme by cosubstrate were 9.2 X 10(6) M-1 s-1 in the case of the reaction with lipid hydroperoxide and 3.5 X 10(6) M-1 s-1 in the case of reaction with hydrogen peroxide. The intrinsic affinities of the synthase peroxidase for substrate (Ks) were estimated to be on the order of 10(-8) M for lipid hydroperoxide and 10(-5) M for hydrogen peroxide. These affinities are quite similar to the reported affinities of the synthase for these hydroperoxides as activators of the cyclooxygenase. The peroxidase activity was found to be progressively inactivated during the peroxidase reaction. The rate of inactivation of the peroxidase was increased by increases in hydroperoxide level, and decreased by increases in peroxidase cosubstrate. The inactivation of the peroxidase appeared to occur by a hydroperoxide-dependent process, originating from synthase Compound I or Compound II.     

Engineering the proximal heme cavity of catalase-peroxidase

Catalase-peroxidases (KatGs) are prokaryotic heme peroxidases with homology to yeast cytochrome c peroxidase (CCP) and plant ascorbate peroxidases (APXs). KatGs, CCP and APXs contain identical amino acid triads in the heme pocket (distal Arg/Trp/His and proximal His/Trp/Asp), but differ dramatically in their reactivities towards hydrogen peroxide and various one-electron donors. Only KatGs have high catalase activity in addition to a peroxidase activity of broad specificity. Here, we investigated the effect of mutating the conserved proximal triad on KatG catalysis. With the exception of W341F, all variants (H290Q, W341A, D402N, D402E) exhibited a catalase activity <1% of wild-type KatG and spectral properties indicating alterations in heme coordination and spin states. Generally, the peroxidase activity was much less effected by these mutations. Compared with wild-type KatG the W341F variant had a catalase and halogenation activity of about 40% and an even increased overall peroxidase activity. This variant, for the first time, allowed to monitor the hydrogen peroxide mediated transitions of ferric KatG to compound I and back to the resting enzyme. Compound I reduction by aromatic one-electron donors (o-dianisidine, pyrogallol, aniline) was not influenced by exchanging Trp by Phe. The findings are discussed in comparison with the data known from CCP and APX and a reaction mechanism for the multifunctional activity of the W341F variant is suggested.     

Conformational differences in Mycobacterium tuberculosis catalase-peroxidase KatG and its S315T mutant revealed by resonance Raman spectroscopy

KatG from Mycobacterium tuberculosis is a heme-containing catalase-peroxidase, which belongs to the class I peroxidases and is important for activation of the prodrug isoniazid (INH), a front-line antituberculosis drug. In many clinical isolates, resistance to INH has been linked to mutations on the katG gene, and the most prevalent mutation, S315T, suggests that modification of the heme pocket has occurred. Electronic absorption and resonance Raman spectra of ferric wild-type (WT) KatG and its INH-resistant mutant KatG(S315T) at different pH values and their complexes with INH and benzohydroxamic acid (BHA) are reported. At neutral pH, a quantum mechanically mixed spin state (QS) is revealed, which coexists with five-coordinate and six-coordinate high-spin hemes in WT KatG. The QS heme is the major species in KatG(S315T). Addition of either INH or BHA to KatG induces only minor changes in the resonance Raman spectra, indicating that both compounds do not directly interact with the heme iron. New vibrational modes are observed at 430, 473, and 521 cm(-1), and these modes are indicative of a change in conformation in the KatG heme pocket. The intensity of these modes and the relative population of the QS heme are stable in KatG(S315T) but not in the WT enzyme. This indicates that there are differences in heme pocket stability between WT KatG and KatG(S315T). We will discuss the stabilization of the QS heme and propose a model for the inhibition of INH oxidation by KatG(S315T).     

Reduced affinity for Isoniazid in the S315T mutant of Mycobacterium tuberculosis KatG is a key factor in antibiotic resistance

Catalase-peroxidase (KatG) from Mycobacterium tuberculosis is responsible for the activation of the antitubercular drug isonicotinic acid hydrazide (INH) and is important for survival of M. tuberculosis in macrophages. Characterization of the structure and catalytic mechanism of KatG is being pursued to provide insights into drug (INH) resistance in M. tuberculosis. Site-directed mutagenesis was used to prepare the INH-resistant mutant KatG[S315T], and the overexpressed enzyme was characterized and compared with wild-type KatG. KatG[S315T] exhibits a reduced tendency to form six-coordinate heme, because of coordination of water to iron during purification and storage, and also forms a highly unstable Compound III (oxyferrous enzyme). Catalase activity and peroxidase activity measured using t-butylhydroperoxide and o-dianisidine were moderately reduced in the mutant compared with wild-type KatG. Stopped-flow spectrophotometric experiments revealed a rate of Compound I formation similar to wild-type KatG using peroxyacetic acid to initiate the catalytic cycle, but no Compound I was detected when bulkier peroxides (chloroperoxybenzoic acid, t-butylhydroperoxide) were used. The affinity of resting (ferric) KatG[S315T] for INH, measured using isothermal titration calorimetry, was greatly reduced compared with wild-type KatG, as were rates of reaction of Compound I with the drug. These observations reveal that although KatG[S315T] maintains reasonably good steady state catalytic rates, poor binding of the drug to the enzyme limits drug activation and brings about INH resistance.     

Identification and characterization of tyrosyl radical formation in Mycobacterium tuberculosis catalase-peroxidase (KatG)

The catalytic function of Mycobacterium tuberculosis catalase-peroxidase (KatG) and its role in activation of the anti-tuberculosis antibiotic isoniazid were investigated using rapid freeze-quench electron paramagnetic resonance (RFQ-EPR) experiments. The reaction of KatG with peroxyacetic acid was followed as a function of time using x-band EPR at 77 K. A doublet EPR signal appears within 6.4 ms after mixing and at time points through hundreds of milliseconds. Thereafter, a singlet signal develops and finally predominates after 1 s, with a total yield of radical approximately 0.5 spin/heme. Simulation of the spectra provided EPR parameters consistent with those for tyrosyl radicals. Changes in the hyperfine splitting and/or line width in spectra for l-3,3-[2H2]tyrosine-labeled, but not l-2,4,5,6,7-[2H5]tryptophan-labeled KatG confirmed this assignment. The initial rate of radical formation was unchanged using a 3-fold or 10-fold excess of peroxyacetic acid, consistent with a rate-determining step involving an intermediate. Although Compound I is likely to be the precursor of tyrosyl radical in KatG, neither its EPR signal nor its reduction to Compound II during formation of the radical(s) could be observed. The tyrosyl radical doublet signal was rapidly quenched by addition of isoniazid and benzoic hydrazide, but not by iproniazid, which binds poorly to KatG.     

Rapid formation of compound II and a tyrosyl radical in the Y229F mutant of Mycobacterium tuberculosis catalase-peroxidase disrupts catalase but not peroxidase function

Catalase-peroxidases (KatG), which belong to Class I heme peroxidase enzymes, have high catalase activity and substantial peroxidase activity. The Y229F mutant of Mycobacterium tuberculosis KatG was prepared and characterized to investigate the functional role of this conserved residue unique to KatG enzymes. Purified, overexpressed KatG[Y229F] exhibited severely reduced steady-state catalase activity while the peroxidase activity was enhanced. Optical stopped-flow experiments showed rapid formation of Compound (Cmpd) II (oxyferryl heme intermediate) in the reaction of resting KatG[Y229F] with peroxyacetic acid or chloroperoxybenzoic acid, without detectable accumulation of Cmpd I (oxyferryl heme pi-cation radical intermediate), the latter being readily observed in the wild-type enzyme under similar conditions. Facile formation of Cmpd III (oxyferrous enzyme) also occurred in the mutant in the presence of micromolar hydrogen peroxide. Thus, the lost catalase function may be explained in part because of formation of intermediates that do not participate in catalatic turnover. The source of the reducing equivalent required for generation of Cmpd II from Cmpd I was shown by rapid freeze-quench electron paramagnetic resonance spectroscopy to be a tyrosine residue, just as in wild-type KatG. The kinetic coupling of radical generation and Cmpd II formation was shown in KatG[Y229F]. Residue Y229, which is a component of a newly defined three amino acid adduct in catalase-peroxidases, is critically important for protecting the catalase activity of KatG.     

Effect of distal cavity mutations on the formation of compound I in catalase-peroxidases

Catalase-peroxidases have a predominant catalase activity but differ from monofunctional catalases in exhibiting a substantial peroxidase activity and in having different residues in the heme cavity. We present a kinetic study of the formation of the key intermediate compound I by probing the role of the conserved distal amino acid triad Arg-Trp-His of a recombinant catalase-peroxidase in its reaction with hydrogen peroxide, peroxoacetic acid, and m-chloroperbenzoic acid. Both the wild-type enzyme and six mutants (R119A, R119N, W122F, W122A, H123Q, H123E) have been investigated by steady-state and stopped-flow spectroscopy. The turnover number of catalase activity of R119A is 14.6%, R119N 0.5%, H123E 0.03%, and H123Q 0.02% of wild-type activity. Interestingly, W122F and W122A completely lost their catalase activity but retained their peroxidase activity. Bimolecular rate constants of compound I formation of the wild-type enzyme and the mutants have been determined. The Trp-122 mutants for the first time made it possible to follow the transition of the ferric enzyme to compound I by hydrogen peroxide spectroscopically underlining the important role of Trp-122 in catalase activity. The results demonstrate that the role of the distal His-Arg pair in catalase-peroxidases is important in the heterolytic cleavage of hydrogen peroxide (i.e. compound I formation), whereas the distal tryptophan is essential for compound I reduction by hydrogen peroxide.     

Kinetics of the reaction of superoxide anion with ferric horseradish peroxidase

Reaction of horseradish peroxidase A2 and C with superoxide anion (O2-) has been studied using pulse radiolysis technique. Peroxidase C formed Compound I and an oxy form of the enzyme due to reaction of ferric enzyme with hydrogen peroxide (H2O2) and O2-, respectively. At low concentrations of O2- (less than 1 mM), O2- reacted with ferric peroxidase C nearly quantitatively and formation of H2O2 was negligible. The rate constant for the reaction was found to be increased below pH 6 and this phenomenon can be explained by assuming that HO2 reacts with peroxidase C more rapidly than O2-. In contrast the formation of oxyperoxidase could not be detected in the case of peroxidase A2 after the pulse, and only Compound I of the enzyme was formed. Peroxidase A2, however, produced the oxy form upon aerobic addition of NADH, suggesting that O2- can also react with peroxidase A2 to form the oxy form. The results at present indicate that the rate constant for the reaction of O2- with peroxidase A2 is smaller than 103 M-1.s-1.     

Distal site aspartate is essential in the catalase activity of catalase-peroxidases

Structural and biochemical characterization of aspartate 152 at the distal heme side of catalase-peroxidase (KatG) from Synechocystis PCC 6803 reveals an important functional role for this residue. In the wild-type protein, the side chain carboxyl group of Asp152 is 7.8 A apart from the heme iron and is hydrogen-bonded to two water molecules and a KatG-specific large loop. We have prepared the site-specific variants Asp152Asn, Asp152Ser, Asp152Trp, and Pro151Ala. Exchange of Asp152 exhibited dramatic consequences on the bifunctional activity of this unique peroxidase. The turnover number of catalase activity of Asp152Asn is 2.7%, Asp152Ser 5.7%, and Asp152Trp is 0.6% of wild-type activity. By contrast, the peroxidase activity of the Asp152 variants was 2-7 times higher than that of wild-type KatG or Pro151Ala. The KatG-specific pH profile of the catalase activity was completely different in these variants and exchange of Asp152 made it possible to follow the transition of the ferric enzyme to the redox intermediate compound I by hydrogen peroxide spectroscopically and to determine the corresponding bimolecular rate constant to be 7.5 x 10(6) M(-1) s(-1) (pH 7 and 15 degrees C). The reactivity of compound I toward aromatic one-electron donors was enhanced in the Asp152 variants compared with the wild-type protein, whereas the reactivity toward hydrogen peroxide was dramatically decreased. A mechanism for the hydrogen peroxide oxidation, which is different from monofunctional catalases and involves the distal residues Trp122 and Asp152, is proposed.     

Oxidation of horseradish peroxidase compound II to compound I.

In the reaction between equimolar amounts of horseradish peroxidase and chlorite, the native enzyme is oxidized directly to Compound II (Hewson, W.D., and Hager, L.P. (1979) J. Biol. Chem. 254, 3175-3181). At acidic pH but not at alkaline values, this initial reaction is followed by oxidation of Compound II to Compound I. The highly pH-dependent chemistry of Compound II can be readily demonstrated by the reduction of Compound I, with ferrocyanide at acidic, neutral, and alkaline pH values. Titration at low pH yields very little Compound II, whereas at high pH, the yield is quantitative. Similarly, the reaction of horseradish peroxidase and chlorite at low pH yields Compound I while only Compound II is formed at high pH. At intermediate pH values both the ferrocyanide reduction and the chlorite reaction produce intermediate yields of Compound II. This behavior is explained in terms of acidic and basic forms of Compound II. The acidic form is reactive and unstable relative to the basic form. Compound II can be readily oxidized to Compound I by either chloride or chlorine dioxide in acidic solution. The oxidation does not occur in alkaline solution, nor will hydrogen peroxide cause the oxidation of Compound II, even at low pH.     

Modification of the active site of Mycobacterium tuberculosis KatG after disruption of the Met-Tyr-Trp cross-linked adduct

Mycobacterium tuberculosis catalase-peroxidase (Mtb KatG) is a bifunctional enzyme that possesses both catalase and peroxidase activities and is responsible for the activation of the antituberculosis drug isoniazid. Mtb KatG contains an unusual adduct in its distal heme-pocket that consists of the covalently linked Trp107, Tyr229, and Met255. The KatG(Y229F) mutant lacks this adduct and has decreased steady-state catalase activity and enhanced peroxidase activity. In order to test a potential structural role of the adduct that supports catalase activity, we have used resonance Raman spectroscopy to probe the local heme environment of KatG(Y229F). In comparison to wild-type KatG, resting KatG(Y229F) contains a significant amount of 6-coordinate, low-spin heme and a more planar heme. Resonance Raman spectroscopy of the ferrous-CO complex of KatG(Y229F) suggest a non-linear Fe-CO binding geometry that is less tilted than in wild-type KatG. These data provide evidence that the Met-Tyr-Trp adduct imparts structural stability to the active site of KatG that seems to be important for sustaining catalase activity.     

Isoniazid: Radical-induced oxidation and reduction chemistry

Isoniazid is a potent and selective therapeutic prodrug agent used to treat infections by Mycobacterium tuberculosis. Although it has been used clinically for over five decades its full mechanism of action is still being elucidated. Essential to its mechanism of action is the activation of isoniazid to a reactive intermediate, the isonicotinyl acyl radical, by the catalase-peroxidase KatG. The isonicotinyl acyl radical then reacts with NAD producing an inhibitor of the NADH-dependent enoyl ACP reductase responsible for mycolic acid synthesis as its primary target. However, the initial oxidation of isoniazid by KatG has also revealed alternative reaction pathways leading to an array of carbon-, oxygen-, and nitrogen-centered radical intermediates. It has also been reported that isoniazid produces nitric oxide in the presence of KatG and hydrogen peroxide. In this study, the temperature-dependent rate constants for the hydroxyl radical oxidation and solvated electron reduction of isoniazid and two model compounds have been studied. Based on these data the initial oxidation of isoniazid by the hydroxyl radical has been shown to predominantly occur at the primary nitrogen of the hydrazyl moiety, consistent with the postulated mechanism for the formation of the isonicotinyl radical. The hydrated electron reduction occurred mostly at the pyridine ring. Concomitant EPR spin-trap measurements under a variety of oxidizing and reducing conditions did not show any evidence of nitric oxide production as had been previously reported. Finally, examination of the transient absorption spectra obtained for hydrated electron reaction with isoniazid demonstrated for the first time an initial reduced transient identified as the isonicotinyl acyl radical produced from isoniazid.     

Catalase-peroxidases (KatG) exhibit NADH oxidase activity

Catalase-peroxidases (KatG) produced by Burkholderia pseudomallei, Escherichia coli, and Mycobacterium tuberculosis catalyze the oxidation of NADH to form NAD+ and either H2O2 or superoxide radical depending on pH. The NADH oxidase reaction requires molecular oxygen, does not require hydrogen peroxide, is not inhibited by superoxide dismutase or catalase, and has a pH optimum of 8.75, clearly differentiating it from the peroxidase and catalase reactions with pH optima of 5.5 and 6.5, respectively, and from the NADH peroxidase-oxidase reaction of horseradish peroxidase. B. pseudomallei KatG has a relatively high affinity for NADH (Km=12 microm), but the oxidase reaction is slow (kcat=0.54 min(-1)) compared with the peroxidase and catalase reactions. The catalase-peroxidases also catalyze the hydrazinolysis of isonicotinic acid hydrazide (INH) in an oxygen- and H2O2-independent reaction, and KatG-dependent radical generation from a mixture of NADH and INH is two to three times faster than the combined rates of separate reactions with NADH and INH alone. The major products from the coupled reaction, identified by high pressure liquid chromatography fractionation and mass spectrometry, are NAD+ and isonicotinoyl-NAD, the activated form of isoniazid that inhibits mycolic acid synthesis in M. tuberculosis. Isonicotinoyl-NAD synthesis from a mixture of NAD+ and INH is KatG-dependent and is activated by manganese ion. M. tuberculosis KatG catalyzes isonicotinoyl-NAD formation from NAD+ and INH more efficiently than B. pseudomallei KatG.