High‐Performance Solution‐Processed Double‐Walled Carbon Nanotube Transparent Electrode for Perovskite Solar Cells

Double‐walled carbon nanotubes are between single‐walled carbon nanotubes and multiwalled carbon nanotubes. They are comparable to single‐walled carbon nanotubes with respect to the light optical density, but their mechanical stability and solubility are higher. Exploiting such advantages, solution‐processed transparent electrodes are demonstrated using double‐walled carbon nanotubes and their application to perovskite solar cells is also demonstrated. Perovskite solar cells which harvest clean solar power have attracted a lot of attention as a next‐generation renewable energy source. However, their eco‐friendliness, cost, and flexibility are limited by the use of transparent oxide conductors, which are inflexible, difficult to fabricate, and made up of expensive rare metals. Solution‐processed double‐walled carbon nanotubes can replace conventional transparent electrodes to resolve such issues. Perovskite solar cells using the double‐walled carbon nanotube transparent electrodes produce an operating power conversion efficiency of 17.2% without hysteresis. As the first solution‐processed electrode‐based perovskite solar cells, this work will pave the pathway to the large‐size, low‐cost, and eco‐friendly solar devices.     

Sample Preparation and Imaging Conditions Affect mEos3.2 Photophysics in Fission Yeast Cells

Photoconvertible fluorescent proteins (PCFPs) are widely used in super-resolution microscopy and studies of cellular dynamics. However, our understanding of their photophysics is still limited, hampering their quantitative application. For example, we do not know the optimal sample preparation methods or imaging conditions to count protein molecules fused to PCFPs by single-molecule localization microscopy in live and fixed cells. We also do not know how the behavior of PCFPs in live cells compares with fixed cells. Therefore, we investigated how formaldehyde fixation influences the photophysical properties of the popular green-to-red PCFP mEos3.2 in fission yeast cells under a wide range of imaging conditions. We estimated photophysical parameters by fitting a three-state model of photoconversion and photobleaching to the time course of fluorescence signal per yeast cell expressing mEos3.2. We discovered that formaldehyde fixation makes the fluorescence signal, photoconversion rate, and photobleaching rate of mEos3.2 sensitive to the buffer conditions likely by permeabilizing the yeast cell membrane. Under some imaging conditions, the time-integrated mEos3.2 signal per yeast cell is similar in live cells and fixed cells imaged in buffer at pH 8.5 with 1 mM DTT, indicating that light chemical fixation does not destroy mEos3.2 molecules. We also discovered that 405-nm irradiation drove some red-state mEos3.2 molecules to enter an intermediate dark state, which can be converted back to the red fluorescent state by 561-nm illumination. Our findings provide a guide to quantitatively compare conditions for imaging mEos3.2-tagged molecules in yeast cells. Our imaging assay and mathematical model are easy to implement and provide a simple quantitative approach to measure the time-integrated signal and the photoconversion and photobleaching rates of fluorescent proteins in cells.     

Carbon Nanomaterials for Dye‐Sensitized Solar Cell Applications: A Bright Future

There is an urgent need for alternative energy resources due to the rapid rise in the price of fossil fuels and the great danger of the increasing greenhouse effect caused by carbon dioxide emission. Sunlight provides by far the largest of all carbon‐neutral energy sources. Therefore, the current solar‐ or photovoltaic‐cell‐based technologies, which can utilize solar energy, are of extreme importance. Dye‐sensitized solar cells (DSSCs) are of particular interest because they can offer a number of advantages when compared to existing photovoltaic technologies. In this review, recent advances in carbon‐related nanomaterials and their application as materials for DSSCs are discussed. Carbon nanomaterials such as carbon nanotubes and graphene display remarkable electrical, thermal, and mechanical properties that enable several exciting applications in DSSCs. The progress on the utilisation of carbon nanotubes, graphene, and their nanocomposites is reviewed as highly prospective materials to replace transparent conductive oxide (TCO) layers and counter electrodes in DSSCs. Moreover, carbon nanomaterials enable improvement of the performance of absorbing layers in working photoanodes by enhancing the light absorption and electron transport across the semiconducting nanostructured film. The application of carbon nanotubes, graphite particles, and graphene as additives towards the improved efficiency of the electrolyte in these solar cells is also discussed. Finally, a brief outlook is provided on the future development of carbon nanomaterial composites as prospective materials for DSSCs, particularly as components for printable solar cells, which are expected to play an important role in the future solar‐cell market.     

Highly selective and sensitive determination of dopamine using a Nafion/carbon nanotubes coated poly(3-methylthiophene) modified electrode

A poly(3-methylthiophene) modified glassy carbon electrode coated with Nafion/single-walled carbon nanotubes film was fabricated and used for highly selective and sensitive determination of dopamine. The hybrid film surface of the modified electrode was characterized by scanning electrochemical microscopy (SECM) and the results indicated that the carbon nanotubes were dispersed uniformly on the conductive polymer. The experimental results suggest that the hybrid film modified electrode combining the advantages of poly(3-methylthiophene), carbon nanotubes with Nafion exhibits dramatic electrocatalytic effect on the oxidation of dopamine (DA) and results in a marked enhancement of the current response. In 0.1M phosphate buffer solution (PBS) of pH 7.0, the differential pulse voltammetric (DPV) peak heights are linear with DA concentration in three intervals, viz. 0.020-0.10 microM, 0.10-1.0 microM and 1.0-6.0 microM, with correlation coefficients of 0.9993, 0.9996 and 0.9993, respectively. The detection limit of 5.0 nM DA could be estimated (S/N=3). Moreover, the interferences of ascorbic acid (AA) and uric acid (UC) are effectively diminished. This hybrid film modified electrode can be applied to the determination of DA contents in dopamine hydrochloride injection and human serum. These attractive features provide a potential application for either in vitro measurement of DA in the presence of excess AA and UA or as detectors in flow injection analysis (FIA) and high performance liquid chromatography (HPLC).     

Single‐Walled Carbon Nanotubes in Emerging Solar Cells: Synthesis and Electrode Applications

Emerging solar cells, namely, organic solar cells and perovskite solar cells, are the thin‐film photovoltaics that have light to electricity conversion efficiencies close to that of silicon solar cells while possessing advantages in having additional functionalities, facile‐processability, and low fabrication cost. To maximize these advantages, the electrode components must be replaced by materials that are more flexible and cost‐effective. Researchers around the globe have been looking for the new electrodes that meet these requirements. Among many candidates, single‐walled carbon nanotubes have demonstrated their feasibility as the new alternative to conventional electrodes, such as indium tin oxide and metals. This review discusses various growth methods of single‐walled carbon nanotubes and their electrode applications in thin‐film photovoltaics.     

Determination of glutathione and glutathione disulfide in hepatocytes by liquid chromatography with an electrode modified with functionalized carbon nanotubes

Glutathione (GSH) and glutathione disulfide (GSSG) are important thiols, which provide defence against oxidative stress by scavenging free radicals or causing the reduction of hydrogen peroxide. The ratio GSH/GSSG is often used as a sensitive index of oxidative stress in vivo. In this paper, a direct electrochemical method using an electrode modified with functionalized carbon nanotubes as electrochemical detector (ED) for liquid chromatography (LC) was described. The electrochemical behaviors of GSH and GSSG on this modified electrode were investigated by cyclic voltammetry and it was found that the functionalized carbon nanotubes exhibited efficiently electrocatalysis on the current responses of GSH and GSSG. In LC-ED, both of the analytes showed good and stable current responses. The detection limit of GSH was 0.2 pmol on column and that of GSSG was 1.2 pmol on column, which were low enough for the analysis of real small samples. The method was sensitive enough to detect difference in concentration of GSH and GSSG in hepatocytes from animals with and without introduction of oxidation stress by glucose or hydrogenperoxide.     

The Role of Nanotubes in Carbon Nanotube–Silicon Solar Cells

The mechanism of action of nanotube‐silicon heterojunction solar cells is under discussion with literature reports suggesting either p‐n or Schottky junction characteristics. The crux of the issue is whether the nanotubes contribute to the observed photocurrent or not. In order to further understand the mechanism of action of these solar cells, devices were fabricated using nanotubes sorted by (n,m) species, so that the excitonic transition is well defined and is outside the range of absorption of silicon and such that any contribution to the photocurrent from the nanotubes should be easily resolved from that of the silicon by analysis of the photocurrent spectrum. The devices exhibited the photocurrent spectra of silicon only, indicating that the nanotubes do not contribute to the photocurrent. However, by changing the back contact electrode material, results were obtained that appear to show such a contribution.     

Multifunctional Effect of p‐Doping,Antireflection, and Encapsulation by Polymeric Acid for High Efficiency and Stable Carbon Nanotube‐Based Silicon Solar Cells

Silicon solar cells among different types of solar energy harvesters have entered the commercial market owing to their high power conversion efficiency and stability. By replacing the electrode and the p‐type layer by a single layer of carbon nanotubes, the device can be further simplified. This greatly augments the attractiveness of silicon solar cells in the light of raw material shortages and the solar payback period, as well as lowering the fabrication costs. However, carbon nanotube‐based silicon solar cells still lack device efficiency and stability. These can be improved by chemical doping, antireflection coating, and encapsulation. In this work, the multifunctional effects of p‐doping, antireflection, and encapsulation are observed simultaneously, by applying a polymeric acid. This method increases the power conversion efficiency of single‐walled carbon nanotube‐based silicon solar cells from 9.5% to 14.4% and leads to unprecedented device stability of more than 120 d under severe conditions. In addition, the polymeric acid‐applied carbon nanotube‐based silicon solar cells show excellent chemical and mechanical robustness. The obtained stable efficiency stands the highest among the reported carbon nanotube‐based silicon solar cells.     

Microtubule-dependent transport and dynamics of vimentin intermediate filaments

We studied two aspects of vimentin intermediate filament dynamics—transport of filaments and subunit exchange. We observed transport of long filaments in the periphery of cells using live-cell structured illumination microscopy. We studied filament transport elsewhere in cells using a photoconvertible-vimentin probe and total internal reflection microscopy. We found that filaments were rapidly transported along linear tracks in both anterograde and retrograde directions. Filament transport was microtubule dependent but independent of microtubule polymerization and/or an interaction with the plus end–binding protein APC. We also studied subunit exchange in filaments by long-term imaging after photoconversion. We found that converted vimentin remained in small clusters along the length of filaments rather than redistributing uniformly throughout the network, even in cells that divided after photoconversion. These data show that vimentin filaments do not depolymerize into individual subunits; they recompose by severing and reannealing. Together these results show that vimentin filaments are very dynamic and that their transport is required for network maintenance.     

Photoelectric properties of chlorophyll and carotene solutions in nematic liquid crystal located between semiconducting electrodes

The photopotential and photocurrent generation for chlorophyll a, beta-carotene and a mixture of these pigments dissolved in nematic liquid crystal and located between transparent semiconducting electrodes were measured. Both pigments exhibit photopotential and photocurrent generation. From the photocurrent amplitudes it follows that the efficiency of electron transfer to a semiconducting electrode from beta-carotene is higher than from chlorophyll alpha. The photocurrent amplitude of the pigment mixture is slightly lower than that calculated as a sum of amplitudes of pigments located in separated cells. This difference can be explained by secondary effects, such as competition between carotene and chlorophyll molecules in a process of adsorption on a semiconducting electrode. Therefore it seems that no charge transfer complexes of chlorophyll and carotene are formed in the investigated model system.     

Comparison of complex permittivities of isotonic colloids containing single‐wall carbon nanotubes of varying chirality

The application of bio‐compatible, conductive nanoparticles in combination with radiofrequency (RF) irradiation to raise tissue temperatures between 40 and 60 °C for hyperthermia and ablation spurred interest in the complex permittivities of isotonic nanoparticle‐based colloids. Nanoparticles with large aspect ratios and high permittivities increase the bulk permittivity of the colloid and RF losses at the macroscopic scale. The complex permittivities of isotonic colloids with and without single‐wall carbon nanotubes (SWCNTs) containing either metallic, semiconducting, or mixed chiralities were measured from 20 MHz to 1 GHz at room temperature. The colloids were made with one of three different isotonic solvents: phosphate buffered saline (PBS), and Dulbecco's modified eagle medium (DMEM) with and without 0.5% weight/volume bovine serum albumin to simulate cytosol and blood, respectively. The concentration of elemental carbon from the SWCNTs in the colloids ranged from 16 to 17 mM. The permittivities were corrected for electrode polarization effects by fitting the data to the Cole–Cole relaxation model with a constant phase angle element. The presence of SWCNTs increased both the real and imaginary components of the permittivities of the colloids. For all three solvents, the direct current (DC) components of the real and imaginary permittivities were greatest for the colloids containing the mixed chirality SWCNTs, followed by the colloids with semiconducting SWCNTs, and then metallic SWCNTs. Bioelectromagnetics 33:134–146, 2012. © 2011 Wiley Periodicals, Inc.     

Ranking the affinity of aromatic residues for carbon nanotubes by using designed surfactant peptides.

A series of surfactant peptides were created to evaluate the affinity of aromatic AAs for single-walled carbon nanotubes in the absence of complications from peptide folding or self-association. Each surfactant peptide has a lipidlike architecture, with two Lys residues at the C-terminus as a hydrophilic head, five Val residues to form a hydrophobic tail, and the testing AA at the N-terminus. Raman and CD spectroscopic studies reveal that the surfactant peptides have a large unordered structural component which is independent of peptide concentration, suggesting that the peptides undergo minimal association under experimental conditions, thus removing this interference from interpretation of the peptide/carbon nanotube interactions. A lack of peptide self-association is also indicated by sedimentation equilibrium ultracentrifugation results. Optical spectroscopy of the peptide/carbon nanotube dispersions indicate that among the three aromatic AAs, tryptophan has the highest affinity for carbon nanotubes (both bundled and individual states) when incorporated into a surfactant peptide, while the Tyr-containing peptide is more selective for individual carbon nanotubes. Phe has the lowest overall affinity for carbon nanotubes. Raman spectra of dispersions made with SPF, SPY and SPW display similar types of nanotubes dispersed, although differences in the relative nanotube populations are observed by optical spectroscopy.     

Reactivity of carbon nanotubes: Free radical generation or scavenging activity?

Carbon nanotubes (CNTs) currently attract intense research efforts because of their unique properties which make them suitable for many industrial applications. When inhaled, CNTs constitute a possible hazard to human health. Several studies have shown that when instilled in the lung of experimental animals, CNTs induced an inflammatory and fibrotic response similar to that caused by other toxic particles which might be the result of oxidative stress caused by particle- and/or cell-derived free radicals. There is, however, no direct experimental evidence of a capacity of carbon nanotubes to generate directly free radicals. Here we report that multiwall carbon nanotubes (MWCNT) in aqueous suspension do not generate oxygen or carbon-centered free radicals in the presence of H2O2 or formate, respectively, as detected with the spin-trapping technique. Conversely, we observed that, when in contact with an external source of hydroxyl or superoxide radicals, MWCNT exhibit a remarkable radical scavenging capacity. It is therefore possible that the inflammatory reaction reported in vivo must be ascribed to MWCNT features other than particle-derived free radical generation.     

Ambient Method for the Production of an Ionically Gated Carbon Nanotube Common Cathode in Tandem Organic Solar Cells

A method of fabricating organic photovoltaic (OPV) tandems that requires no vacuum processing is presented. These devices are comprised of two solution-processed polymeric cells connected in parallel by a transparent carbon nanotubes (CNT) interlayer. This structure includes improvements in fabrication techniques for tandem OPV devices. First the need for ambient-processed cathodes is considered. The CNT anode in the tandem device is tuned via ionic gating to become a common cathode. Ionic gating employs electric double layer charging to lower the work function of the CNT electrode. Secondly, the difficulty of sequentially stacking tandem layers by solution-processing is addressed. The devices are fabricated via solution and dry-lamination in ambient conditions with parallel processing steps. The method of fabricating the individual polymeric cells, the steps needed to laminate them together with a common CNT cathode, and then provide some representative results are described. These results demonstrate ionic gating of the CNT electrode to create a common cathode and addition of current and efficiency as a result of the lamination procedure.     

Photoconversion of Purified Fluorescent Proteins and Dual-probe Optical Highlighting in Live Cells

Photoconvertible fluorescent proteins (pc-FPs) are a class of fluorescent proteins with "optical highlighter" capability, meaning that the color of fluorescence can be changed by exposure to light of a specific wavelength. Optical highlighting allows noninvasive marking of a subpopulation of fluorescent molecules, and is therefore ideal for tracking single cells or organelles.Critical parameters for efficient photoconversion are the intensity and the exposure time of the photoconversion light. If the intensity is too low, photoconversion will be slow or not occur at all. On the other hand, too much intensity or too long exposure can photobleach the protein and thereby reduce the efficiency of photoconversion.This protocol describes a general approach how to set up a confocal laser scanning microscope for pc-FP photoconversion applications. First, we describe a procedure for preparing purified protein droplet samples. This sample format is very convenient for studying the photophysical behavior of fluorescent proteins under the microscope. Second, we will use the protein droplet sample to show how to configure the microscope for photoconversion. And finally, we will show how to perform optical highlighting in live cells, including dual-probe optical highlighting with mOrange2 and Dronpa.Download video file.^{(127M, mp4)}     

Biocatalysts for fuel cells: efficient hydrogenase orientation for H<Subscript>2</Subscript> oxidation at electrodes modified with carbon nanotubes

We report the modification of gold and graphite electrodes with commercially available carbon nanotubes for immobilization of Desulfovibrio fructosovorans [NiFe] hydrogenase, for hydrogen evolution or consumption. Multiwalled carbon nanotubes, single-walled carbon nanotubes (SWCNs), and amine-modified and carboxyl-functionalized SWCNs were used and compared throughout. Two separate methods were performed: covalent attachment of oriented hydrogenase by controlled architecture of carbon nanotubes at gold electrodes, and adsorption of hydrogenase at carbon-nanotube-coated pyrolytic graphite electrodes. In the case of self-assembled carbon nanotubes at gold electrodes, hydrogenase orientation based on electrostatic interaction with the electrode surface was found to control the electrocatalytic process for H₂ oxidation. In the case of carbon nanotube coatings on pyrolytic graphite electrodes, catalysis was controlled more by the geometry of the nanotubes than by the orientation of the enzyme. Noticeably, shortened SWCNs were demonstrated to allow direct electron transfer and generate high and quite stable current densities for H₂ oxidation via adsorbed hydrogenase, despite having many carboxylic surface functions that could yield unfavorable hydrogenase orientation for direct electron transfer. This result is attributable to the high degree of oxygenated surface functions in addition to the length of shortened SWCNs that yields highly divided materials. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Molecular dynamics simulations of the orientation properties of cytochrome <Emphasis Type="Italic">c</Emphasis> on the surface of single-walled carbon nanotubes

Electron transfer between cytochrome c (Cytc) and electrodes can be influenced greatly by the orientation of protein on the surface of the electrodes. In the present study, different initial orientations of Cytc on the surface of five types of single-walled carbon nanotubes (SWNTs), with different diameters and chirality, were constructed. Properties of the orientations of proteins on the surface of these tubes were first investigated through molecular dynamics simulations. It was shown that variations in SWNT diameter do not significantly affect the orientation; however, the chirality of the SWNTs is crucial to the orientation of the heme embedded in Cytc, and the orientation of the protein can consequently be influenced by the heme orientation. A new electron pathway between Cytc and SWNT, which hopefully benefits electron transfer efficiency, has also been proposed. This study promises to provide theoretical guidance for the rational design of bio-sensors or bio-fuel cells by using Cytc-decorated carbon nanotube electrodes.     

Solid-state dye-sensitized TiO(2) solar cells based on a sensitizer covalently wired to a hole conducting polymer.

We report on the molecular wiring efficiency of a ruthenium polypyridine complex acting as a sensitizer connected to a poly(3-hexyl)thiophene chain acting as hole transporting material. We have developed an efficient synthetic strategy to covalently connect via an ethanyl spacer a regioregular poly(3-hexyl)thiophene chain to a ruthenium complex. Solid-state dye-sensitized solar cells were prepared either with the latter system or with a similar ruthenium sensitizer but lacking the polymer chain (reference system). The comparison of the photocurrent-photovoltage characteristics of the cells recorded under AM1.5 indicates a two fold improvement of the overall photoconversion efficiencies when the sensitizer is grafted to the hole transporting material (eta = 0.27%) relative to the reference system (eta = 0.13%). The higher photovoltaic performance can be attributed to the better diffusion-like propagation of the holes from the sensitizer to the counter electrode through the covalently linked polythiophene chain.     

Overoxidized polypyrrole film directed single-walled carbon nanotubes immobilization on glassy carbon electrode and its sensing applications

In this paper, the films of overoxidized polypyrrole (PPyox) directed single-walled carbon nanotubes (SWNTs) have been electrochemically coated onto glassy carbon electrode (GCE). Electroactive monomer pyrrole was added into the solution containing sodium dodecyl sulfate (SDS) and SWNTs. Then, electropolymerization was proceeded at the surface of GCE, and a novel kind of conducting polymer/carbon nanotubes (CNTs) composite film with the orientation of CNTs were obtained correspondingly. Finally, this obtained polypyrrole (PPy)/SWNTs film modified GCE was oxidized at a potential of +1.8 V. It can be found that this proposed PPyox/SWNTs composite film modified GCE exhibited excellent electrocatalytic properties for some species such as nitrite, ascorbic acid (AA), dopamine (DA) and uric acid (UA), and could be used as a new sensor for practical applications. Compared with previous CNTs modified electrodes, SWNTs were oriented towards the outside of modified layer by PPyox and SDS, which made the film easily conductive. Moreover, this proposed film modified electrode was more stable, selective and applicable.