基于地高辛标记对小麦进行Southern杂交分析主要影响因素的优化和验证

以转基因小麦和野生型小麦DNA为材料,对利用地高辛标记对小麦基因组DNA进行Southern杂交分析的影响因素进行了优化研究,包括探针制备与纯化、样品DNA量、酶切体系、真空转印条件、杂交条件、免疫检测方法等。结果表明,对随机引物标记的模板和标记后的探针进行纯化可明显提高探针的标记效率,10μg高质量的DNA样品在80μl的体系中,酶切8～12h可获得良好的效果;真空转膜时使用碱性液比中性液获得的转膜效果更干净;试剂纯度、杂交温度及杂交炉转速等均对杂交效果产生重要影响;配合改进的CSPD涂布方法,使用化学发光检测系统比单纯使用X光片显像更易操作,背景更干净;本研究所优化的地高辛标记的小麦Southern杂交分析显示出较高的灵敏度和信噪比,结果稳定,可克服同位素标记对实验条件、设备及实验人员身体状况等限制,在普通实验室推广应用。     

An alternative nonradioactive method for labeling DNA using biotin

An alternative nonradioactive labeling method and a highly sensitive technique for detecting specific DNA sequences are described. The labeling method requires the "Klenow" fragment of DNA polymerase I and random hexanucleotides (synthesized or naturally extracted) as a primer for the production of highly sensitive DNA probes. The system has three main steps: (i) labeling of DNA with biotinylated 11-dUTP; (ii) detection of biotinylated DNA by a one-step procedure with streptavidin-alkaline phosphatase complex; (iii) blocking of background with Tween 20. Twenty attograms (2 X 10(-17) g) of pBR322 plasmid DNA was detected by dot-blot hybridization. Upon Southern blot hybridization, 7.4 fg (7.4 X 10(-15) g) of pBR322 HindIII DNA was detected using the biotinylated pBR322 plasmid DNA probe; 40.8 ag and 7.4 fg of lambda HindIII DNA were detected with the biotinylated whole lambda DNA probe by dot and Southern blot hybridization, respectively. Specific bands were also detected with the biotinylated argininosuccinolyase probe upon Northern blotting of mouse poly(A+) RNA. Further applications for in situ hybridization are also described.     

A versatile non-radioactive technique for restriction analysis of recombinant DNA

Restriction analysis of recombinant DNA is most frequently performed according to Smith and Birnstiel by labeling 5'-termini with 32P, followed by partial digestion, separation, and autoradiographic detection of labeled fragments. We describe a rapid, non-radioactive technique for restriction analysis of recombinant DNA which combines Southern blotting of partial restriction digests and hybridization with a vector-specific probe labeled with the steroid-hapten Digoxigenin for immunological detection. This technique has several advantages compared to conventional methods. Labeling with 32P is not necessary and as the labeled DNA-fragment used as probe is vector-specific, it can be applied for numerous constructs using the particular cloning vector (e.g.pBR322). Furthermore, the probe can be stored for several months and can be reused many times.     

A modified nick translation method used with FISH that produces reliable results with archival tissue sections

Nick translation is used to label DNA and RNA to produce probes for in situ hybridization and Northern and Southern blotting. Fluorescence in situ hybridization (FISH) is a widely applied technique used to determine chromosomal and genetic anomalies in many biological samples. Initially the technique was applied to metaphase preparations, but the usefulness of detecting genetic anomalies in solid tumors in situ has resulted in the development of modified protocols. Formalin fixed paraffin processed tissue sections present novel challenges when applying FISH; the probes must be small (between 200 and 600 base pairs) and pretreatment is necessary before the probes can be applied to tissue sections, to promote probe access to target DNA. Here we report on a modification of a nick translation method to produce a probe that can reliably be used with FISH in paraffin processed tissue sections.     

A procedure for repeated usage of 33P-labeled DNA probes in hybridization experiments.

We describe a technique for repeated use of 33P-labeled DNA probes in Southern hybridization experiments. A nick-translated 33P-labeled DNA probe in a volume of 0.5-1.0 ml of hybridization mixture (final concentration, 10-100 ng/ml) is used to wet a sheet of filter paper (approx 10 microliters/cm2), which covers a nylon membrane with DNA transferred by Southern blotting, and both are set between two washed X-ray films. The "sandwich" is placed in a plastic bag for hybridization for 16-24 h at 42 degrees C. This very simple procedure using 33P-labeled DNA probes has a number of advantages over the standard method using 32P-labeled probes: (a) a significantly lower biohazard (body/arms exposure); (b) a very small volume of hybridization mixture in contact with a DNA-containing membrane and the higher probe concentrations attainable, causing some increase in sensitivity, and, finally, (c) repeated use of the probe-containing filter (over approx 3 days for unique sequences and up to 2 weeks for reiterated sequences) due to a relatively long 33P half-life (25.3 days).     

A two-step hybridization method for chemiluminescent detection of single copy genes.

We have developed a technique for the chemiluminescent detection of single copy genes that eliminates the high backgrounds and problems with probe labeling associated with existing methods. The procedure employs a primary hybridization of single-stranded probe DNA to immobilized target DNA, a secondary hybridization with a covalently cross-linked oligonucleotide-alkaline phosphatase conjugate, followed by incubation in the chemiluminescent substrate AMPPD and detection on x-ray film. The key to the success of this method is that the primary probe contains a region complementary to the target DNA as well as to the oligonucleotide sequence of the secondary probe-alkaline phosphatase conjugate. Here we report our results using the two-step hybridization procedure to detect single copy genes from genomic Southern blots.     

An improved method for chromosome-specific labeling of alpha satellite DNA in situ by using denatured double-stranded DNA probes as primers in a primed in situ labeling (PRINS) procedure.

An improved primed in situ labeling (PRINS) procedure that provides fast, highly sensitive, and nonradioactive cytogenetic localization of chromosome-specific tandem repeat sequences is presented. The PRINS technique is based on the sequence-specific annealing in situ of unlabeled DNA. This DNA then serves as primer for chain elongation in situ catalyzed by a DNA polymerase. If biotin-labeled nucleotides are used as substrate for the chain elongation, the hybridization site becomes labeled with biotin. The biotin is subsequently made visible through the binding of FITC-labeled avidin. Tandem repeat sequences may be detected in a few hours with synthetic oligonucleotides as primers, but specific labeling of single chromosomes is not easily obtained. This may be achieved, however, if denatured double-stranded DNA fragments from polymerase-chain-reaction products or cloned probes are used as primers. In the latter case, single chromosome pairs are stained with a speed and ease (1 h reaction and no probe labeling) that are superior to traditional in situ hybridization. Subsequent high-quality Q banding of the chromosomes is also possible. The developments described here extends the range of applications of the PRINS technique, so that it now can operate with any type of probe that is available for traditional in situ hybridization.     

Nonradioactive in Situ Hybridization with Digoxigenin Labeled DNA Probes

Nonradioactive in situ hybridization techniques are becoming increasingly important tools for rapid analysis of the topological organization of DNA and RNA sequences within cells. Prerequisite for further advances with these techniques are multiple labeling and detection systems for different probes. Here we summarize our results with a recently developed labeling and detection system. The DNA probe for in situ hybridization is modified with digoxigenin-labeled deoxyuridine-triphosphate. Digoxigenin is linked to dUTP via an 11-atom linear spacer (Dig-[11]-dUTP). Labeled DNA probes were hybridized in situ to chromosome preparations. The hybridization signal was detected using digoxigenin-specific antibodies covalently coupled to enzyme markers (alkaline phosphatase or peroxidase) or to fluorescent dyes. Color reactions catalyzed by the enzymes resulted in precipitates located on the chromosomes at the site of probe hybridization. This was verified by hybridizing DNA probes of known chromosomal origin. The signals were analyzed by bright field, reflection contrast and fluorescence microscopy. The results indicate that the new technique gives strong signals and can also be used in combination with other systems (e.g., biotin) to detect differently labeled DNA probes on the same metaphase plate.     

Preparation of horseradish peroxidase-labeled probes

The direct labeling of nucleic acid probes, with horseradish peroxidase (HRP) may be used in many membrane hybridization applications, including Southern blots, Northern blots, colony and plaque screening, PCR products detection/identification. This article describes the preparation method, which involves the labeling of a single-stranded nucleic acid probe with a positively charged HRP-parabenzoquinonepolyethyleneimine complex (labeling reagent). The associated hybridization and posthybridization protocols are relatively simple, which makes probes labeled directly with HRP particularly suitable for large scale screening, where tens or hundreds of blots are processed weekly.     

One-hour downward alkaline capillary transfer for blotting of DNA and RNA.

The downward alkaline capillary transfer of DNA and RNA from agarose gel to a hybridization membrane was performed using a transfer solution containing 3 M NaCl and 8 mM NaOH. Under mild alkaline conditions, DNA and RNA were completely eluted from the agarose gel and bound to a hybridization membrane within 1 h. On the basis of this new method of transfer a blotting protocol, downward alkaline blotting, was elaborated. It provides a fast and efficient alternative to commonly used Southern and Northern blotting protocols. The downward alkaline blotting of DNA and RNA can be completed in 2.5 and 1.5 h, respectively, and can be used with both plastic and nitrocellulose membranes. In addition, the downward alkaline blotting protocol allows for a hybridization efficiency of DNA and RNA higher than that of the standard blotting protocols performed at neutral pH.     

Trans-diamminedichlorplatinum (II)-modified probes for detection of picogram quantities of DNA.

A novel simple nonradioactive method for detection of specific nucleotide sequences has been developed. This method consists of the hybridization of a target DNA with a DNA probe modified with trans-diamminedichlorplatinum(II) (trans-DDP) followed by detection of DNA/DNA hybrids with affinity-isolated anti-DNA-trans-DDP antibodies and poly-horseradish peroxidase-protein A conjugate. Major advantages of this approach are the low cost and the extreme simplicity of the labeling procedure, which involves only mixing of the reagents. The sensitivity of the proposed technique is sufficient to detect 0.8 pg of DNA in Southern blot hybridization and 25 fg in dot hybridization and permits colony screening.     

Chromatography in DNA radiolabeling: Hands-off automation using a robotic workstation

The experiments described in the present paper were performed in order to determine whether the Biomek-1000 (Beckman Instruments, Fullerton, CA, USA) automated laboratory workstation can be used in a fully automated DNA labeling method followed by automated gravity-driven size exclusion purification of molecular probes. To this aim, we performed random oligodeoxyribonucleotide priming of a HIV-1 LTR probe that was used for molecular hybridization to Southern blotted polymerase chain reaction products. The results obtained demonstrate that the automatically labeled probe can be efficiently purified by automated and gravity-driven Sephadex G-50 chromatography, without any major changes in hybridization property. This robotic methodology can be used in several procedures employing radioisotope labeling.     

Gene mapping on maize pachytene chromosomes by in situ hybridization

A sensitive in situ hybridization technique which was effective for mapping genes of low copy number on human metaphase chromosomes was used for gene mapping on maize pachytene chromosomes. A cloned genomic EcoR1 fragment of 10.8 kb, containing most or all of the sequence encoding the Waxy locus mRNA, was used as the probe. Southern DNA blotting analyses performed by Shure et al. (1983) indicated that the Waxy locus was a single copy sequence. In our in situ hybridization experiment, the probe hybridized to a specific site on chromosome 9. Labeling at this site was detected in 48.6% of 154 randomly selected copies of chromosome 9. To test the sensitivity of the method, subclones of the fragment with insert sizes of 6.6, 4.7, 3.5, 2.3, 1.9 and 0.8 kb were used for in situ hybridizations. Labeling efficiency for each probe was determined. The data showed that a single copy probe of 1.9 kb could be detected at the correct position in 18% of 183 randomly selected number 9 chromosomes.     

The thyroglobulin gene resides on chromosome 8 in man and on chromosome 7 in the rat

Human chromosomes were separated by a dual laser FACS sorter and their DNA hybridized with a thyroglobulin gene probe. A strong hybridization signal was obtained with DNA from chromosome 8. A panel of mouse-rat cell hybrids was used to determine the chromosomal localization of the rat thyroglobulin gene by the Southern blotting method. Comparison of the cytogenetic data with the hybridization signals obtained with the rat thyroglobulin probe allowed assignment of this gene to rat chromosome 7. It is concluded that the synteny relationship between the thyroglobulin gene and the c-myc oncogene has been conserved in rat and man.     

Flow cytometric measurement of telomere length

The regulation of telomere length may be involved in the cellular physiology of senescence, reproduction, cancer, immune response to infection, and possibly immune deficiency. The measurement of telomere length, critical to research in this area, has traditionally been performed by Southern blot analysis, which is cumbersome and time consuming. Several alternative methods have been described in recent years. Some, such as pulsed-field electrophoresis, slot blots, and centromere-to-telomere ratio measurements are essentially improvements to the Southern blot technique. However, other methods such as fluorescent in situ hybridization on metaphase chromosome spreads and flow cytometry-based fluorescent in situ hybridization represent a completely new technical approach to the problem. In this review, we compare methods, with particular emphasis placed on flow cytometric techniques for measuring telomere length in situ and identifying potential areas where improvements may still be made.     

Analysis of production brewing strains of yeast by DNA fingerprinting

P. WIGHTMAN, D.E. QUAIN AND P. G. MEADEN. 1996. Production brewing strains of the yeast Saccharomyces cerevisiae were analysed by DNA fingerprinting, using a Southern blotting and hybridization procedure and employing the Tyl-15 transposon as a probe. The ability to differentiate readily between strains was very dependent on the restriction enzyme used to digest the DNA prior to Southern blotting and hybridization; the enzymes Eco RI, Pst I and Sal I were found to be particularly useful in this respect. The method was applicable to the differentiation of both ale and lager yeasts, and was sufficiently sensitive to distinguish between very closely related strains. DNA fingerprinting by this approach confirmed, for example, that a flocculent strain isolated during a production-scale fermentation with a lager yeast was genotypically different from the parent.     

Applications of universal probe on DNA hybridization

A convenient method for DNA hybridization termed "Universal probe" is described which is based on the principle of sandwich hybridization. This system consists of two probes: primary probe which is single-stranded DNA prepared from a chimeric phage-plasmid vector containing the complementary sequence to a target; and labeled secondary probe which has an opposite strand of the primary probe without the complementary sequence. By use this universal probe human beta-globin gene was able to be detected on Southern blots of genomic DNA. A potential advantage of this method is that the single-stranded primary probe is prepared easily by the chimeric phage-plasmid vector system and tedious labeling is not needed each time.     

Sheep gene mapping: synteny between COL2AI and the LDHB-PEPB-TPI-GAPD-LALBA-IGFl group

DNA extracted from 21 hamster-sheep hybrid cell lines was subjected, after Southern blotting, to hybridization with a type-II alpha 1 collagen genomic probe (COL2A1). The corresponding locus was found to be syntenic with the LDHB-PEPB-TPI-GAPD-LALBA-IGF1 group in sheep.     

cDNA cloning and mapping of the human creatine kinase M gene to 19q13

We describe the first isolation of a human creatine kinase M cDNA clone and its mapping of the gene to human chromosome 19. A human creatine kinase M cDNA clone, pJN2CK-M, harboring a 1,160-bp insert, was isolated by colony hybridization with a previously sequenced chicken creatine kinase M cDNA probe. The human cDNA was used as a probe in Southern transfers of TaqI-digested genomic DNA from mouse/human somatic-cell hybrids to localize the human creatine kinase-M gene to chromosome 19. In situ hybridization of the tritiated cDNA probe to metaphase chromosomes of peripheral blood lymphocytes from normal males revealed significant labeling to chromosome 19. These two independent methodologies assign the human creatine kinase-M gene to chromosome 19. Since greater than 69% of the grains of chromosome 19 label band q13, the human creatine kinase-M gene has been mapped to 19q13. On the basis of high-resolution G-banding, the predominant labeling site was 19q13.2-q13.3.