Fine Structures of Cell Envelopes of Chlamydia Organisms as Revealed by Freeze-Etching and Negative Staining Techniques

The cell walls of Chlamydia psittaci (meningopneumonitis strain) were examined by the freeze-etching and negative staining techniques. It was observed that the cleaved convex surface of the developmental, reticulate body was covered with numerous non-etchable particles 9 to 10 nm in diameter, these particles being rarely seen on the concave surface. Similarly, the convex surface of the mature, elementary body (EB) was covered with many particles but the concavity lacked these particles. After etching, the smooth concave surface of the EB appeared to have a hexagonally arrayed subunit structure, on which the button structure (B structure) was observed. Each B structure had a diameter of 27 nm and several B structures were grouped together in a hexagonal arrangement with a center-to-center spacing of 45 nm. In a limited area of the negatively stained EB cell wall, hexagonally arrayed rosette structures were present, with a center-to-center spacing similar to the B structures seen in the freeze-etched preparation. Each rosette, about 19 to 20 nm in diameter, appeared to be composed of a radial arrangement of nine subunits. The freeze-fractured cell wall-cytoplasmic membrane complexes indicated that the outer surface of the cytoplasmic membrane which appeared as the convex surface was covered with the fine particles, and thus it was likely that frozen EB was cleaved at the gap between the cell wall and ctyoplasmic membrane. On the cleaved inclusion, several groups of fine particles were observed. In each group, the particles were arranged hexagonally with the spacing ranging from 20 to 50 nm.     

REGULAR STRUCTURES IN MEMBRANES : I. Membranes in the Endocytic Complex of Ileal Epithelial Cells

An "apical endocytic complex" in the ileal lining cells of suckling rats is described. The complex consists of a continuous network of membrane-limited tubules which originate as invaginations of the apical plasma membrane at the base of the microvilli, some associated vesicles, and a giant vacuole. The lumenal surface of this tubular network of membranes and associated vesicles is covered with a regular repeating particulate structure. The repeating unit is an ~7.5-nm diameter particle which has a distinct subunit structure composed of possibly nine smaller particles each ~3 nm in diameter. The ~7.5-nm diameter particles are joined together with a center-to-center separation of ~15 nm to form long rows. These linear aggregates, when arranged laterally, give rise to several square and oblique two-dimensional lattice arrangements of the particles which cover the surface of the membrane. Whether a square or oblique lattice is generated depends on the center-to-center separation of the rows and on the relative displacement of the particles in adjacent rows. Four membrane faces are revealed by fracturing frozen membranes of the apical tubules and vesicles: two complementary inner membrane faces exposed by the fracturing process and the lumenal and cytoplasmic membrane surfaces revealed by etching. The outer membrane face reveals a distinct array of membrane particles. This array also sometimes can be seen on the outer (B) fracture face and is sometimes faintly visible on the inner (A) fracture face. Combined data from sectioned, negatively stained, and freeze-etched preparations indicate that this regular particulate structure is a specialization that is primarily localized in the outer half of the membrane mainly in the outer leaflet.     

Structure of rough,smooth, stripped and reconstituted rough membranes derived from rat liver as visualized by the freeze fracture technique

The structure of purified fractions of rough, smooth, stripped rough and reconstituted rough membranes have been investigated by the freeze etching technique. Preparations of rough and reconstituted rough membranes, active in protein synthesis, show vesicles whose outer surface is covered with ribosome-like particles. The inner surface of these vesicles contains also numerous particles of the same size. The particles located on the outer surface are largely absent in the stripped rough membrane preparations which, however, retain the particles located on the inner face. Particles were not seen either on the outer nor on the inner face of the smooth membranes. The possibility is considered that the particles located on the inner face are specific to the rough membranes and might play a role in the specific binding of ribosomes to the membranes.     

Asymmetric mass distribution of (Na+ + K+)-ATPase in membranes studied by freeze-fracture-etch electron microscopy

SDS-purified porcine kidney (Na+ + K+)-ATPase was studied by thin-section and freeze-etch electron microscopy. Freeze-fracturing of resealed membrane fragments shows no difference in the distribution of intramembranous particles of approx. 9.0 nm in diameter between convex and concave fracture faces. However, two types of convex face are found: FA, which shows a rather smooth background with many intramembranous particles, and FB, which shows a textured background with very few or no intramembranous particles. Etching the fractured samples further reveals that FA faces are covered with many intramembranous particles, while the etched external faces (EA) are either irregularly granulated or reveal many particles half the size of intramembranous particles. FB faces are covered with distinct pits of 9 nm or larger. The etched external surfaces (EB) are covered with many particles of intramembranous particle size. These results suggest that there are two vesicle orientations in our resealed purified membrane preparation: right-side-out, as in vivo, and inside-out. The majority of the protein mass is distributed only on one side of the membranes. Right-side-out resealed membrane vesicles after fracturing and etching show particulated FA convex fracture faces and irregularly granulated or smooth etched EA surfaces, indicating that the FA face is the protoplasmic fracture face and that the majority of the protein mass of the (Na+ + K+)-ATPase is located on the cytoplasmic half of the membrane.     

Structure of pyruvate dehydrogenase complex. Comparison between freeze-etching and negative staining.

Pyruvate dehydrogenase complex (pyruvate : lipoate oxidoreductase (decarboxylating and acceptor-acetylating), EC 1.2.4.1), from pig heart, was studied by spray freeze etching and negative staining. From freeze etching experiments an average particle weight of 7-10(6) was estimated. Negative staining after glutaraldehyde fixation and freeze etching of unfixed and prefixed enzyme solutions yielded no significant difference in particle dimensions: the majority of the isometric complex molecules measured approximately 400 A in diameter. Tantalum tungsten shadowed freeze etch replicas indicated that the surface of the complex is built up of globular units. The relative positions of these units are in good agreement with the model still under discussion.     

A study of the Distribution and Density of the VEGFR-2 Receptor on Glioma Microvascular Endothelial Cell Membranes

The purpose of the study was to examine the nanoscale distribution and density of the VEGFR-2 membrane receptor on the endothelial cell surface of glioma microvasculature. Immunofluorescence and atomic force microscopy combined with immunogold labeling techniques were used to characterize and determine the position of the glioma microvasculature endothelial cell surface receptor VEGFR-2. We aimed to indirectly detect the distribution of VEGFR-2 on the cell membrane at the nanoscale level and to analyze VEGFR-2 quantitatively. Immunofluorescence imaging showed a large amount of VEGFR-2 scattered across the endothelial cell surface; atomic force microscopy imaging also showed two globular structures of different sizes scattered across the endothelial cell surface. The difference between the average diameter of the small globular structure outside the cell surface (43.67 ± 5.02 nm) and that of IgG (44.61 ± 3.19 nm) was not statistically significant (P > 0.05). The three-dimensional morphologies of the small globular structure outside the cell surface and IgG were similar. The difference between the average diameter of the large globular structure outside the cell surface (74.19 ± 9.10 nm) and that of IgG-SpA-CG (74.54 ± 15.93 nm) was also not statistically significant (P > 0.05). The three-dimensional morphologies of this large globular structure outside the cell surface and IgG-SpA-CG were similar. The total density of these two globular structures within the unit area was 92 ± 19 particles μm(2). No globular structures were seen on the cell surface in the control group. The large globular structure on the surface of glioma microvascular endothelial cells was categorized as a VEGFR-2-IgG-SpA-CG immune complex, whereas the small globular structure was categorized as a VEGFR-2-IgG immune complex. The positions of the globular structures were the same as the positions of the VEGFR-2 molecules. A large amount of VEGFR-2 was scattered across glioma microvascular endothelial cell surfaces; the receptor density was about 92 per square micron.     

Insect UV-, and green-photoreceptor membranes studied by the freeze-fracture technique

Summary The membranes of the microvilli of UV- and green-photoreceptors of the ant Myrmecia gulosa have been studied with the freeze-fracture technique. Both inner fracture faces, the cytoplasmic P-face and the extracellular E-face, are covered by globular particles. The P-face particles appear to be randomly distributed, occasionally forming clusters. Their density is about 7,000/m², and their mean diameter is 8.5 nm. The E-face particles, however, are arranged in an ordered square pattern with a center-to-center spacing of 9 nm. The density and distribution of P- and E-face particles are the same in both the UV- and the green-photoreceptor membranes. No differences were found in the ultrastructural organization of photoreceptor membranes after dark or light adaptation. It is suggested that the P-face particles represent rhodopsin molecules.     

Xylan deposition on secondary wall of Fagus crenata fiber

Summary. Delignified and/or xylanase-treated secondary walls of Fagus crenata fibers were examined by field emission scanning electron microscopy. Microfibrils with a smooth surface were visible in the innermost surface of the differentiating fiber secondary wall. There was no ultrastructural difference between control and delignified sections, indicating that lignin deposition had not started in the innermost surface of the cell wall. There was no ultrastructural difference between control and xylanase-treated sections. Microfibrils on the outer part of the differentiating secondary wall surface had globular substances in delignified sections. These globular substances disappeared following xylanase treatment, indicating that these globules are xylan. The globular substances were not visible near the inner part of the differentiating secondary wall but gradually increased toward the outer part of the secondary wall, indicating that xylan penetrated into the cell wall and continuously accumulated on the microfibrils. Mature-fiber secondary walls were also examined by field emission scanning electron microscopy. Microfibrils were not apparent in the secondary wall in control specimens. Microfibrils with many globular substances were observed in the delignified specimens. Following xylanase treatment, the microfibrils had a smooth surface without any globules, indicating that the globular substance is xylan. These results suggest that cellulose microfibrils synthesized on the plasma membrane are released into the innermost surface of the secondary wall and coated with a thin layer of xylan. Successive deposition of xylan onto the cell wall increases the microfibril diameter. The large amounts of xylan that accumulated on microfibrils appear globular but are covered with lignin after they are deposited. Received February 20, 2001/Accepted September 1, 2001     

Influence of different etching times on dentin surface morphology

The aim of this study is to investigate the influence of different etching times on demineralized dentin surface morphology using scanning electron microscopy and qualitative line microanalysis of chemical structure. Two sample groups, consisting of 30 first premolar teeth in each group, were established. Teeth were cut at the half-distance between the enamel-dentin junction and the pulp. The first group of specimens was etched for 10 seconds and the second group for 30 seconds. 37% ortophosphoric acid was used. SEM (scanning electron microscopy) was utilized to observe the following parameters: number and diameter of dentinal tubules, dentinal and intertubular dentinal surface percentage, appearance of the dentin surface porous zone containing smear layer and demineralized residual collagen particles with dentin demineralization products in acid globules, and dissolved peritubular dentin cuff. After calculating measurements of central tendency (X,C, Mo, SD), Kolmogorov-Smirnov and Student t-test were performed to confirm the quantitative results, and the chi2-test was run to produce qualitative data. In contrast to the 10-second etching time, the increased etching time of 30 seconds resulted in the following findings: (1) an increased number of dentinal tubules (p < 0.05), (2) an increase in dentinal tubule diameter (p < 0.05), (3) an increase in dentinal tubule surface percentage (p < 0.001), (4) a decrease in intertubular dentinal surface percentage (p < 0.001), (5) appearance of dentin surface porous zone containing smear layer and demineralized residual collagen particles with dentin demineralization products in acid globules (p < 0.001), and (6) completely dissolved peritubular dentin cuff (p <0.001). Therefore, different etching times using the same phosphoric acid concentration result in different morphological changes in demineralized dentin surface. Moreover, based on a comparison with current studies, prolonged etching time causes morphological changes to dentin surface. Such changes, have, in turn, negative effects on the dentin hybridization process.     

Analysis of the structure of intramembrane particles of the mammalian urinary bladder

The luminal and discoid vacuole membranes of the superficial cell layer of the transitional epithelium of the mammalian urinary bladder have been studied by thin-sectioning and freeze-fracture-etch (FFE) electron microscope methods. For the FFE studies membranes were deposited on a cationized glass surface, covered by a thin copper disc, and fractured under liquid N2. Specimens were etched at -100 degrees C and replicated at -190 degrees C. A model of the lattice membrane derived from thin sections was used to predict the heights of the fracture faces above the glass surface. A hexagonal pattern of globular intramembrane particles spaced 160 A apart was seen in the external fracture (EF) face plaques as previously described and regarded as the dominant structure. However, very extensive areas of another pattern, seen before in only limited areas, have beeen found in the EF faces. The pattern consists of a smooth hexagonal lattice with the same space constant as the globular one but a different structure. By image analysis it consists of overlapping domains bordered by shared but incomplete metal rims. Each domain has a central spot of metal encircled by a shadow. The surface of the smooth lattice is partly complementary to the corresponding protoplasmic fracture (PF) face which shows a similar hexagonal lattice with the same space constant. The height of the smooth EF lattice above the glass substrate is the same as the plane of the center of the lipid bilayer predicted by the model. The mean heights of the particles of the globular EF lattice are greater than the total thickness of the membrane as predicted by the model and confirmed by measurements. The globular EF lattice is not complementary and it is concluded that the globular particles do not exist in the native membrane but arise artifactually during the preparatory procedures.     

Association of Paramecium bursaria Chlorella viruses with Paramecium bursaria cells: ultrastructural studies

Paramecium bursaria Chlorella viruses were observed by applying transmission electron microscopy in the native symbiotic system Paramecium bursaria (Ciliophora, Oligohymenophorea) and the green algae Chlorella (Chlorellaceae, Trebouxiophyceae). Virus particles were abundant and localized in the ciliary pits of the cortex and in the buccal cavity of P. bursaria. This was shown for two types of the symbiotic systems associated with two types of Chlorella viruses - Pbi or NC64A. A novel quantitative stereological approach was applied to test whether virus particles were distributed randomly on the Paramecium surface or preferentially occupied certain zones. The ability of the virus to form an association with the ciliate was investigated experimentally; virus particles were mixed with P. bursaria or with symbiont-free species P. caudatum. Our results confirmed that in the freshwater ecosystems two types of P. bursaria -Chlorella symbiotic systems exist, those without Chlorella viruses and those associated with a large amount of the viruses. The fate of Chlorella virus particles at the Paramecium surface was determined based on obtained statistical data and taking into account ciliate feeding currents and cortical reorganization during cell division. A life cycle of the viruses in the complete symbiotic system is proposed.     

Membranous cytochrome c oxidase. A freeze-fracture electron microscopic analysis

Suspensions of membranous cytochrome c oxidase prepared from beef heart mitochondria by Triton extraction were ultra-rapidly cooled (in excess of 10,000 deg.C/s) and analyzed using freeze-fracture and freeze-fracture-etch techniques. The preparations contained non-crystalline and crystalline vesicles as isolated vesicles, vesicles inside other vesicles and stacks of vesicles. In non-crystalline vesicles the particles (about 100 Å diameter) are probably formed by the deviation of hydrophobic fracture planes of the membranes around the large transmembrane enzymes. The intramembrane particles thus formed are compared to particles (about 80 Å diameter) in a vesicle reconstituted from purified enzyme and lipid. Crystalline membranous cytochrome c oxidase vesicles display an unusual fracture pattern in which adjacent crystalline surfaces are separated from each other and from the surrounding ice by fracture steps that are approximately the thickness of a single membrane (100 to 120 Å). In addition adjacent crystalline fracture surfaces have similar low-relief textures, both of which differ significantly from the hydrophobic surfaces normally exposed in membrane fractures. This fracture morphology is interpreted in terms of fractures along hydrophilic surfaces of the membranes. Images of etched crystalline vesicles provide support for this interpretation because etching exposes no new surfaces. It is concluded that the crystalline lattices are derived from the portions of enzymes that protrude from the membrane bilayers and that the interdigitation of the enzymes on the inside surfaces of the vesicles or between vesicles determines the appearance of the crystalline surfaces. The arrangement of the tails of the y-shaped molecules on the cytoplasmic sides of the crystalline membranes can be visualized in micrographs directly and in reconstructions of filtered images. The more complex pattern of arms protruding on the matrix side is obscured by the unidirectional shadowing. Fragmentation of the crystalline membranes during fracturing is indicated by particles sometimes present at the edges of fractured membranes and by deep, irregular pits observed in crystalline surfaces. Particles resting on some crystalline surfaces may be fragments of crystalline membranes removed during fracturing. In other crystalline membranes non-protein is removed during fracturing, leaving globular particles embedded in the lattice, which measure about 118 Å diameter. Comparing these particles to the 3-dimensional arrangement of protein described in the accompanying paper (Frey et al., 1982) suggests that such particles are composed of 2 dimers paired along the a-axis. Intramembrane and fragmentation particles of similar size may also have this protein composition.     

Die Feinstruktur der lamellären Einschlußkörper in den Zellkernen des Nektariums von Catalpa bungei

Summary In the nectary of Catalpa bungei the gland cells contain nuclear inclusions consisting of stacks of lamellae 12.7 nm thick. Each lamella is composed of globular particles with a diameter of approximately 12.7 nm. The particles are arranged in a monolayer, revealing a regular square pattern in face view. In adjacent lamellae the globular subunits are almost exactly superimposed; each of them is probably built up of smaller subunits having a diameter of 0.4 nm.

---

---

Herrn Prof. Dr. Horst Drawert nachträglich zum 60. Geburtstag gewidmet     

Adrenal chromaffin granules: evidence for an ultrastructural equivalent of the proton-pumping ATPase

Adrenal chromaffin granules are known to possess an F1-ATPase which according to biochemical criteria is very similar to the mitochondrial one. To find a morphological equivalent for this enzyme chromaffin granules from bovine adrenal medullar were subjected to negative staining and freeze-etching. With both methods globular particles of 8 to 9 min diameter could be demonstrated on the surface of these organelles. A single granule possessed on average 22 particles. In negative staining the particles appeared separated from the membrane by a stalk of 8 nm. This typical morphological appearance was independent from a great variety of experimental procedures. After freeze-etching the particles were closely apposed to the membrane without any evidence for an interposed stalk. Pretreatment of chromaffin granules with pronase or trypsin led to a time dependent disappearance of the surface particles. In negative staining the stalked of chromaffin granules were found to be very similar in structure and size to those of mitochondria which have already been identified as F1-complexes. Based on this observation and other lines of evidence we suggest that the stalk particles found on the surface of chromaffin granules represent the F1-complex of the proton-pumping ATPase of these organelles.     

Substructure of cisternal organelles of neuronal perikarya in immature rat brains revealed by quick-freeze and deep-etch techniques

Summary Membrane-bounded organelles possessing cisternae, i.e., rough endoplasmic reticulum and Golgi apparatus, in immature rat central neurons were examined by quick-freeze and deep-etch techniques to see how their intracisternal structures are organized and how ribosomes are associated with the membrane of the endoplasmic reticulum. Cisternae of endoplasmic reticulum, 60–100 nm wide, were bridged with randomly-distributed strands (trabecular strands, 12.5 nm in mean diameter). Luminal surfaces of cisternae of the endoplasmic reticulum were decorated with various-sized globular particles, some as small as intramembrane particles, and others as large as granules formed by soluble proteins seen in the cytoplasm. A closer examination revealed much thinner strands (3.3. nm in mean diameter). Such thin strands were short, usually winding toward the luminal surface, and sometimes touching the luminal surface with one end. Ribosomes appeared to be embedded into the entire thickness of cross-fractured membranes of endoplasmic reticulum, that is, their internal portions appeared to be situated at almost the same level as the cisternal luminal surface. From the internal portion of ribosomes, single thin strands occasionally protruded into the lumen, suggesting that these thin strands were newly synthesized polypeptides. A horizontal separation within ribosomes appeared to occur at the same level as the hydrophobic middle of the membrane of the endoplasmic reticulum. Interiors of the Golgi apparatus cisternae, which were much narrower than cisternae of endoplasmic reticulum, were similarly bridged with trabecular strands, but the Golgi trabecular strands were thinner and more frequent. Their cisternal lumina were also dotted with globular particles. No identifiable profiles corresponding to the thin strands in the endoplasmic reticulum were observed. Golgi cisternae showed a heterogeneous distribution of membrane granularity; the membrane in narrow cisternal space was granule-rich, while that in expanded space was granule-poor, suggesting a functional compartmentalization of the Golgi cisternae.     

Structural Changes in Membranes of Synchronized Cells demonstrated by Freeze-cleavage

FREEZE-CLEAVAGE is a new technique for studying the ultra-structure· of biological membranes, which fractures cell membranes in half, exposing two intramembranous fracture faces^1–3: the outer fracture face (OFF) and the inner fracture face (IFF). These fracture faces are partially covered with 70 Å globular particles which are thought to be unique structural components of cell membranes, formed by the association of membrane glycoproteins and lipids⁴. The 70 Å particles are dynamic structures and rapidly increase in density in the membranes of lymphocytes following exposure to mitogenic plant proteins (Scott and Marchesi, unpublished work).     

Isolation and properties of the plasmalemma in yeast

Summary A method is described for the isolation of fragments of the plasmalemma based on differential and density gradient centrifugation using cell free extracts from anaerobically grown Saccharomyces cerevisiae. Electron microscopically investigated frozen-etched specimens of isolated plasmalemma revealed the presence of globular particles attached to the outer surface of the membrane; these particles correspond to those observed in situ.In isolated plasmalemma a high specific activity of Mg⁺⁺-dependent ATPase, which is not sensitive to Oligomycin, is present. Yeast plasmalemma contains protein, lipids (including phospholipids) and an appreciable amount of polysaccharide. Hydrolysis of this polysacharide yields only mannose.The treatment of the isolated plasmalemma with detergents liberates the globular particles which can be isolated by density gradient centrifugation. Protein and polysaccharide occur in the respective fraction; therefore the globular particle represents a mannan-protein. It is concluded that the particles, which cover the plasma-membrane of plant cells, represent glycoproteins, that is, building stones to be incorporated into the fibrillar network of the cell walls.     

Studies on the surface coat of Paramecium aurelia

Summary The plasma membrane of Paramecium aurelia is covered with a ruthenium red stainable surface coat. Results obtained after digestion with pronase, trypsin and neuraminidase suggest the glycoprotein nature of this structure. Lipid extraction also affects the surface coat forming material. The results are consistent with the model proposed by Ginsburg and Kobata dealing with spatial configuration of the surface coat components.Authors are grateful to Mrs. D. Kucharczyk for very efficient technical assistence, to Mrs. Z. Kaminska for sectioning the material and Mr. A. Renski for help with the electron microscope service.     

Analysis of the thylakoid outer surface. Coupling factor is limited to unstacked membrane regions

The structure of the spinach thylakoid outer surface has been examined by deepetching, a technique which exposes the true surfaces of biological membranes by sublimination of frozen dilute buffer. The membrane surface is covered with large (150 A average diameter) and small (90 A average diameter) particles. Approximately 30% of the large particles can be removed under conditions reported to selectively remove carboxydismutase from the membrane surface. The remaining large particles can be removed only under conditions which cause a loss of coupling factor activity. When purified coupling factor is readded to membranes from which all coupling factor activity has been removed, large particles reappear, indicating that they represent coupling factor molecules. Since the number of particles and the amount of ATPase activity in the reconstituted and control membranes were the same, coupling factor molecules may be attached to specific binding sites. Analysis of antibody labeling experiments, enzyme assays, and experiments involving the unstacking and restacking of thylakoid membranes indicate that coupling factor is excluded from regions of membrane stacking (grana) and is present only in unstacked membrane regions. The exclusion of coupling factor from grana, which are known to be centers of intense photosynthetic activity, strongly suggests that the mechanism coupling electron transport to photophosphorylation is indirect. In addition to the large and small particles, in some cases regularly spaced ridges are visible on the outer surface after unstacking. Coupling factor binding sites seem to be excluded from regions where these structures occur.     

Regular structures in membranes: the lumenal plasma membrane of the cow urinary bladder.

The ultrastructure of the lumenal plasma membrane of the cow urianry bladder has been studied in thin sections of glutaraldehyde- and glutaraldehyde-H2O2-fixed specimens, by negative staining and freeze fracture. A regular hexagonal array of particles confined to polygonal plaques 0-1-0-4-mum in diameter and separated by 0-02-mum interplaque areas is revealed by all 3 techniques. Cross-sections through particulate areas fixed with glutarayldehyde-H2O2 display a tetralaminar structure consisting of the usual approximately 8-nm-thick trilamellar unit membrane structure, on the external dense leaflet of which is located an additional approximately 4-nm-thick stratum which is occasionally resolved into a row of regulrly spaced approximately 4-nm-diameter particles. Non-particulate areas feature only the approximately 8-nm-thick trilamellar structure. Tangential sections reveal an hexagonal array of particles with a unit cell of approximately 16 nm. Four membrane faces can be revealed by freeze fracture and etching of membranes of the cow urinary bladder; 2 complementary split inner membrane faces (A and B) revealed by the cleaving process and the lumenal and cytoplasmic membrane surfaces exposed by etching. Face B, which belongs to the external membrane leaflet and faces the cytoplasm, displays plaques of particles arranged in a hexagonal lattice with a unit cell of approximately 16 nm. Face A, which belongs to the cytoplasmic membrane leaflet and faces the lumen, displays a complementary array of hexagonally packed pits. The hexagonally arranged particles also protrude into the lumenal membrane surface where they can occasionally be resolved into 6 approximately 5-nm-diameter subunits; the cytoplasmic surface appears smooth. Six approximately 5-nm-diameter subunits are also revealed in negatively stained preparations. The data are consistent with a model for the membrane in which the particles forming the hexagonal structure protrude above the lumenal membrane surface and also bridge most of the thickness of the membrane.