The arterial supply of the cervical vertebral body in newborns

The cervical vertebral column is mainly supplied by both vertebral arteries. A regular ladder pattern of arteries is on the dorsal plane as well as on the ventral plane of the cervical vertebral bodies, opposite to the thoracal and the lumbar area of the vertebral column with only a dorsal ladder pattern of arteries. The cervical arterial anastomoses are built by the segmental arteries of the vertebral arteries, in the back of the cervical vertebral bodies by the arteriae canalis vertebralis anteriores and in the front by the rami anteriores (corporum vertebrarum). The thyrocervical and the costocervical trunks are an additional blood supply especially to the ventral anastomoses. A loss of a segmental artery may have no effect because of the good anastomoses. Some decades of aa. nutriciae come in the vertebral body from all sides, but only 2 up to 4 rr. centrales anteriores and 2 rr. centrales posteriores join in the middle of the vertebral body. There are parallels to the arterial blood supply of the thoracal and the lumbar vertebral bodies. The longitudinal ligaments are supplied by both ladder patterns of arteries.     

Comparative study of Mm. Multifidi in lumbar and thoracic spine.

Imbalance of Mm. Multifidi may play a role in spinal disorders such as scoliosis in the thoracic spine, and lumbar disc herniation and lower back pain in the lumbar spine. Even though changes in these muscles are related to the etiology of these disorders, their anatomy is still poorly understood, especially in the upper regions of the spine. With the aim of gaining a better understanding of the anatomy of Mm. Multifidi in the lumbar and thoracic spine, 12 fresh and two embalmed cadavers were dissected. Our results indicate that Mm. Multifidi present differences in lumbar and thoracic spines concerning their deepness, fibre trajectory, muscle length, muscle mass and tendinous tissue. In the lumbar spine Mm. Multifidi are a superficial, thick and fleshy mass, and their fibres are more vertical in relation to the spinous processes. In the thoracic spine Mm. Multifidi are deeper, thinner, and their fibres are more tendinous and oblique than in the lumbar spine. These differences have implications on Mm. Multifidi architecture and consequently for their function in these two regions of the spine.     

Experimentally induced neck pain causes a decrease in thoracic but not lumbar spine stability

Maintenance of spine stability is considered to be a critical component of spine health. Ross et al. (2015) used a topical capsaicin/heat pain sensitization model to experimentally induce lower back pain, and demonstrated that the experimental pain experience caused a decrease in the muscular contribution to lumbar spine rotational stiffness (related to mechanical stability) as well as lower back local dynamic stability (LDS). It has yet to be established if pain elsewhere in the body, specifically in other regions of the spine, can similarly affect the stability of the lower back. The purpose of this investigation was therefore to quantify thoracic and lumbar spine LDS as well as the muscular contribution to lumbar spine rotational stiffness after an experimental neck pain protocol. Results demonstrated that LDS of the thoracic spine decreased in response to the capsaicin/heat induced neck pain. Limited adaptation was required at the lumbar spine as demonstrated by the lack of statistically significant changes in lower back LDS or rotational stiffness.     

The functions of the lumbar spine during stepping in the cat

To examine the functional roles played by the lumbar spine during overground stepping, seven adult cats were run in electromyographic (EMG) experiments. Recordings were made bilaterally from mm. iliocostalis, longissimus dorsi and multifidus at a single vertebral level (L₃) and from m. rectus abdominis. Stepping movements were monitored synchronously either by videotape or by high speed cinematography. During alternate use of the hindlimbs (walking and trotting), both epaxial and abdominal muscles were active bilaterally and biphasically. During in-phase use of the hindlimbs (galloping and half-bounding), single bursts of activity were observed. Phasic bursts of activity in rectus abdominus were reciprocal to those of epaxial muscles. Second bursts of activity in either group were noted infrequently. Recordings from the same back muscle at several vertebral levels indicated little difference from these patterns. Movements of the lumbar spine during galloping and half-bounding steps, both angular and linear, are easily correlated with muscle activity patterns. Movements of the lumbar spine during walking and trotting show no particular pattern. Only small angular and linear movements are found. It is concluded that the lumbar spine contributes substantially to step length and limb speed during galloping and half-bounding steps and the epaxial and abdominal musculature may also act as elastic bodies. During walking and trotting steps, the epaxial muscles are proposed to act to stabilize the pelvic girdle to provide a firm base for limb muscles which arise on the pelvis and are synchronously active.     

Validation of lumbar spine loading from a musculoskeletal model including the lower limbs and lumbar spine

Low back mechanics are important to quantify to study injury, pain and disability. As in vivo forces are difficult to measure directly, modeling approaches are commonly used to estimate these forces. Validation of model estimates is critical to gain confidence in modeling results across populations of interest, such as people with lower-limb amputation. Motion capture, ground reaction force and electromyographic data were collected from ten participants without an amputation (five male/five female) and five participants with a unilateral transtibial amputation (four male/one female) during trunk-pelvis range of motion trials in flexion/extension, lateral bending and axial rotation. A musculoskeletal model with a detailed lumbar spine and the legs including 294 muscles was used to predict L4-L5 loading and muscle activations using static optimization. Model estimates of L4-L5 intervertebral joint loading were compared to measured intradiscal pressures from the literature and muscle activations were compared to electromyographic signals. Model loading estimates were only significantly different from experimental measurements during trunk extension for males without an amputation and for people with an amputation, which may suggest a greater portion of L4-L5 axial load transfer through the facet joints, as facet loads are not captured by intradiscal pressure transducers. Pressure estimates between the model and previous work were not significantly different for flexion, lateral bending or axial rotation. Timing of model-estimated muscle activations compared well with electromyographic activity of the lumbar paraspinals and upper erector spinae. Validated estimates of low back loading can increase the applicability of musculoskeletal models to clinical diagnosis and treatment.     

Flexion-extension movements in the adult thoracic spine

The flexion-extension mobility of the thoracic spine was studied by examining 120 patients who had no complaints about the thoracic spine. Its quantitative characteristics that assess the contribution of some segments to the movements of the thoracic spine were developed. Sexual differences of the developed quantitative characteristics of the motor function of the thoracic spine were defined. The specific features of changes in the motor function were analyzed in adult females and males.     

The arterial supply of the muscle biceps brachii

The bicipital arteries (Rami bicipitales) were classified according to the part of the muscle they supply, to the artery from which they originate and to their relative position to the median, musculocutaneous and ulnar nerves. The maximal density of bicipital arteries can be found in the middle of the upper arm and slightly distal to the greater tubercle.     

Some aspects of aging in the lumbar spine

I measured the bodies of vertebrae L3 and L4 of 338 skeletons from the Terry collection in the Smithsonian Institution, including Blacks and Whites, males and females, aged from 20 to 90 years. Transverse breadths of the upper and lower endplates (excluding osteophytes) and minimum transverse breadths all increase with age. In general, the greater broadening occurs in the endplates, but the middle of the body also broadens to such a degree that there is no demonstrable increase in vertebral “flaring” with age. In males, posterior body height decreases relative to anterior height, so that the lumbar bodies become more wedge-shaped with age, but females show essentially no change. Anterior height decreases in proportion to minimum breadth, so that the lumbar bodies become relatively lower and broader, and this change is significantly correlated with age in all groups. Midbody height decreases relative to anterior height, so that Nordin's biconcavity index is reduced with age. The increase in biconcavity remains evident even when average anterior-posterior height is used to calculate the index. At all age levels a high percentage of individuals have biconcavity indices of 80% or less, indicating that Nordin's standard of normality for this index, established from measurement on radiographs of the living, should be revised downward for use in evaluating osteoporosis in skeletal populations.     

Three-dimensional static modeling of the lumbar spine

This paper presents three-dimensional static modeling of the human lumbar spine to be used in the formation of anatomically-correct movement patterns for a fully cable-actuated robotic lumbar spine which can mimic in vivo human lumbar spine movements to provide better hands-on training for medical students. The mathematical model incorporates five lumbar vertebrae between the first lumbar vertebra and the sacrum, with dimensions of an average adult human spine. The vertebrae are connected to each other by elastic elements, torsional springs and a spherical joint located at the inferoposterior corner in the mid-sagittal plane of the vertebral body. Elastic elements represent the ligaments that surround the facet joints and the torsional springs represent the collective effect of intervertebral disc which plays a major role in balancing torsional load during upper body motion and the remaining ligaments that support the spinal column. The elastic elements and torsional springs are considered to be nonlinear. The nonlinear stiffness constants for six motion types were solved using a multiobjective optimization technique. The quantitative comparison between the angles of rotations predicted by the proposed model and in the experimental data confirmed that the model yields angles of rotation close to the experimental data. The main contribution is that the new model can be used for all motions while the experimental data was only obtained at discrete measurement points.     

Effect of lumbar fasciae on the stability of the lower lumbar spine

The biomechanical effect of tensioning the lumbar fasciae (LF) on the stability of the spine during sagittal plane motion was analysed using a validated finite element model of the normal lumbosacral spine (L4-S1). To apply the tension in the LF along the direction of the fibres, a local coordinate was allocated using dummy rigid beam elements that originated from the spinous process. Up to 10 Nm of flexion and 7.5 Nm of extension moment was applied with and without 20 N of lateral tension in the LF. A follower load of 400 N was additionally applied along the curvature of the spine. To identify how the magnitude of LF tension related to the stability of the spine, the tensioning on the fasciae was increased up to 40 N with an interval of 10 N under 7.5 Nm of flexion/extension moment. A fascial tension of 20 N produced a 59% decrease in angular motion at 2.5 Nm of flexion moment while there was a 12.3% decrease at 10 Nm in the L5-S1 segment. Its decrement was 53 and 9.6% at 2.5 Nm and 10 Nm, respectively, in the L4-L5 segment. Anterior translation was reduced by 12.1 and 39.0% at the L4-L5 and L5-S1 segments under 10 Nm of flexion moment, respectively. The flexion stiffness shows an almost linear increment with the increase in fascial tension. The results of this study showed that the effect of the LF on the stability of the spine is significant.     

川金丝猴脑的动脉供应

为了探讨川金丝猴脑动脉供应的形态学特征,为脑生物学研究提供结构基础,用血管铸型和组织透明方法追踪观察了川金丝猴幼体脑动脉的来源和分支分布。结果表明川金丝猴与人脑的动脉供应基本相同,也由颈内动脉和椎动脉供应。上述动脉的分支于垂体周围形成大脑动脉环。颈内动脉通过大脑前动脉和大脑中动脉主要供应大脑半球前部的血液,椎动脉参与形成基底动脉、小脑动脉系和大脑后动脉,供应脑干、小脑和大脑后部的血液。另外,川金丝猴幼体左、右大脑前动脉间缺少前交通动脉。     

Directional sensitivity of velocity sense in the lumbar spine

Regulating spinal motion requires proprioceptive feedback. While studies have investigated the sensing of static lumbar postures, few have investigated sensing lumbar movement speed. In this study, proprioceptive contributions to lateral trunk motion were examined during paraspinal muscle vibration. Seventeen healthy subjects performed lateral trunk flexion movements while lying prone with pelvis fixed. A 44.5-Hz vibratory stimulus was applied to the paraspinal muscles at the L3 level. Subjects attempted to match target paces of 9.5, 13.5, and 17.5 deg/s with and without paraspinal muscle vibration. Vibration of the paraspinal musculature was found to result in slower overall lateral flexion. This effect was found to have a greater influence in the difference of directional velocities with vibration applied to the left musculature. These changes reflect the sensitivity of lumbar velocity sense to applied vibration leading to the perception of faster muscle lengthening and ultimately resulting in slower movement velocities. This suggests that muscle spindle organs modulate the ability to sense velocity of motion and are important in the control of dynamic motion of the spine.