Thermostable DNA Polymerase from Thermus thermophilus B35: Preparation and Study of a Modified Form of the Enzyme with High Affinity to ddNTP

The hybrid protein consisting of Tte DNA polymerase fragment and mutant Taq DNA polymerase (F667Y) fragment in the ratio 20 : 1 was constructed. Affinity of the modified enzyme (substitutions F669Y, V667I, and S692Q) to ddNTP was two orders higher than that of the wild type enzyme. The modified enzyme was used for sequencing DNA fragment with total deoxyguanosine and deoxycytidine content of 68%. In the polymerase chain reaction, the modified enzyme exhibits properties typical of the wild type Tte DNA polymerase.     

Synthesis of novel tyrosinyl FRET cassettes, terminators, and their potential use in DNA sequencing

Fluorescence resonance energy transfer (FRET) dye labeled cassettes and terminators with one or more donor dyes (fluorescein) and acceptor dye (rhodamine dyes) with benzofuran or tyrosine linker moieties were synthesized. These terminators were evaluated for their energy transfer and DNA sequencing potential using thermostable DNA polymerase.     

Synthesis of Novel Tyrosinyl FRET Cassettes,Terminators, and Their Potential Use in DNA Sequencing

Abstract

Fluorescence resonance energy transfer (FRET) dye labeled cassettes and terminators with one or more donor dyes (fluorescein) and acceptor dye (rhodamine dyes) with benzofuran or tyrosine linker moieties were synthesized. These terminators were evaluated for their energy transfer and DNA sequencing potential using thermostable DNA polymerase.     

New dye-labeled terminators for improved DNA sequencing patterns.

We have used two new dye sets for automated dye-labeled terminator DNA sequencing. One set consists of four, 4,7-dichlororhodamine dyes (d-rhodamines). The second set consists of energy-transfer dyes that use the 5-carboxy-d-rhodamine dyes as acceptor dyes and the 5- or 6-carboxy isomers of 4'-aminomethylfluorescein as the donor dye. Both dye sets utilize a new linker between the dye and the nucleotide, and both provide more even peak heights in terminator sequencing than the dye-terminators consisting of unsubstituted rhodamine dyes. The unsubstituted rhodamine terminators produced electropherograms in which weak G peaks are observed after A peaks and occasionally C peaks. The number of weak G peaks has been reduced or eliminated with the new dye terminators. The general improvement in peak evenness improves accuracy for the automated base-calling software. The improved signal-to-noise ratio of the energy-transfer dye-labeled terminators combined with more even peak heights results in successful sequencing of high molecular weight DNA templates such as bacterial artificial chromosome DNA.     

Synthesis and application of charge-modified dye-labeled dideoxynucleoside-5'-triphosphates to 'direct-load' DNA sequencing

A novel series of charge-modified, dye-labeled 2′,3′-dideoxynucleoside-triphosphate terminators were synthesized and evaluated as reagents for DNA sequencing. These terminators possess an advantage over existing reagents in that no purification is required to remove unreacted nucleotide or associated breakdown products prior to electrophoretic separation of the sequencing fragments. This obviates the need for a time consuming post-reaction work up, allowing direct loading of DNA sequencing reaction mixtures onto a slab gel. Thermo Sequenase™ II DNA polymerase poorly incorporates the charge-modified terminators compared with regular dye-labeled terminators. However, extending the linker arm between dye and nucleotide and using a mutant form of a related DNA polymerase can in part mitigate the decrease in substrate efficiency. We also present evidence that these charge-modified terminators can relieve gel compression artefacts when used with dGTP in sequencing reactions.     

Variants of DNA polymerase Beta extend mispaired DNA due to increased affinity for nucleotide substrate

DNA polymerase beta offers an attractive system to study the biochemical mechanism of polymerase-dependent mutagenesis. Variants of DNA polymerase beta, Y265F and Y265W, were analyzed for misincorporation efficiency and mispair extension ability, relative to wild-type DNA polymerase beta. Our data show that the fidelity of the mutant polymerases is similar to wild-type enzyme on a one-nucleotide gapped DNA substrate. In contrast, with a six-nucleotide gapped DNA, the mutant proteins are slightly more accurate than the wild-type enzyme. The mutagenic potential of Y265F and Y265W is more pronounced when encountering a mispaired DNA substrate. Here, both variants can extend a G:G mispair quite efficiently, and Y265F can also extend a T:G mispair. The kinetic basis of the increased mispair extension efficiency is due to an improved ability to bind to the incoming nucleotide. Y265W extends the G:G mispair even with an incorrect nucleotide substrate. Overall, our results demonstrate that the Y265 hinge residue is important for stabilizing the architecture of the nucleotide binding pocket of DNA polymerase beta, and that alterations of this residue can have significant impacts upon the fidelity of DNA synthesis.     

Efficient and high fidelity incorporation of dye-terminators by a novel archaeal DNA polymerase mutant

We examined the molecular basis of ddNTP selectivity in archaeal family B DNA polymerases by randomly mutagenizing the gene encoding Thermococcus sp. JDF-3 DNA polymerase and screening mutant libraries for improved ddNTP incorporation. We identified two mutations, P410L and A485T, that improved ddNTP uptake, suggesting the contribution of P410 and A485 to ddNTP/dNTP selectivity in archaeal DNA polymerases. The importance of A485 was identified previously in mutagenesis studies employing Pfu (A486) and Vent (A488) DNA polymerases, while the contribution of P410 to ddNTP/dNTP selectivity has not been reported. We demonstrate that a combination of mutations (P410L/A485T) has an additive effect in improving ddNTP incorporation by a total of 250-fold. To assess the usefulness of the JDF-3 P410L/A485T in fluorescent-sequencing applications, we compared the archaeal mutant to Taq F667Y with respect to fidelity and kinetic parameters for DNA and dye-ddNTPs. Although the Taq F667Y and JDF-3 P410L/A485T mutants exhibit similar K(m) and V(max) values for dye-ddNTPs in single-base extension assays, the archaeal mutant exhibits higher fidelity due to a reduced tendency to form certain (ddG:dT, ddT:dC) mispairs. DNA polymerases exhibiting higher insertion fidelity are expected to provide greater accuracy in SNP frequency determinations by single-base extension and in multiplex minisequencing assays.     

Synthesis of novel piperidinyl linker based energy transfer terminators and their potential use in DNA sequencing

Synthesis of novel piperidinyl linker based ET cassettes and terminators is described These novel terminators are evaluated in the DNA sequencing experiments using thermostable DNA polymerase.     

Rapid incorporation kinetics and improved fidelity of a novel class of 3'-OH unblocked reversible terminators

Recent developments of unique nucleotide probes have expanded our understanding of DNA polymerase function, providing many benefits to techniques involving next-generation sequencing (NGS) technologies. The cyclic reversible termination (CRT) method depends on efficient base-selective incorporation of reversible terminators by DNA polymerases. Most terminators are designed with 3′-O-blocking groups but are incorporated with low efficiency and fidelity. We have developed a novel class of 3′-OH unblocked nucleotides, called Lightning Terminators™, which have a terminating 2-nitrobenzyl moiety attached to hydroxymethylated nucleobases. A key structural feature of this photocleavable group displays a ‘molecular tuning’ effect with respect to single-base termination and improved nucleotide fidelity. Using Therminator™ DNA polymerase, we demonstrate that these 3′-OH unblocked terminators exhibit superior enzymatic performance compared to two other reversible terminators, 3′-O-amino-TTP and 3′-O-azidomethyl-TTP. Lightning Terminators™ show maximum incorporation rates (k_pol) that range from 35 to 45 nt/s, comparable to the fastest NGS chemistries, yet with catalytic efficiencies (k_pol/K_D) comparable to natural nucleotides. Pre-steady-state kinetic studies of thymidine analogs revealed that the major determinant for improved nucleotide selectivity is a significant reduction in k_pol by >1000-fold over TTP misincorporation. These studies highlight the importance of structure–function relationships of modified nucleotides in dictating polymerase performance.     

SYNTHESIS OF NOVEL PIPERIDINYL LINKER BASED ENERGY TRANSFER TERMINATORS AND THEIR POTENTIAL USE IN DNA SEQUENCING

Synthesis of novel piperidinyl linker based ET cassettes and terminators is described. These novel terminators are evaluated in the DNA sequencing experiments using thermostable DNA polymerase.     

利用Taq DNA聚合酶对PCR产物直接进行顺序分析

Taq DNA聚合酶具有反应速度快、温度作用范围广及良好的续进性等特点,可视为一种理想的DNA顺序分析酶。本文首先对非对称性PCR扩增过程中单、双链DNA产物的积累情况进行了分析,然后采用标记延伸二步法,对Taq DNA聚合酶的性质及影响因素进行分析。为进一步改进Taq DNA聚合酶测序的方法,本反应建立了“Klenow-型”的直接掺入标记同位素测序法,即在反应液中加入与标记核苷酸相应的一定浓度的冷dNTP。此法不但解决了二步法中引物后部分DNA顺序无法读出的缺点,而且简化了反应步骤,亦能得到令人满意的顺序分析结果,每次可读出至少400碱基的序列。     

Novel cyanine dye-labeled dideoxynucleoside triphosphates for DNA sequencing

Single color cyanine dye-labeled (Cy 5.0 and Cy 5.5) dideoxynucleoside-5'-triphosphates, or 'terminators', containing different spacer lengths were synthesized and evaluated for efficacy in DNA sequencing methods using a modified thermally stable DNA polymerase. The single color cyanine dye terminators were formulated into two separate sets of sequencing mixes, one for Cy 5.0 and the other for Cy 5.5, and evaluated on different automated sequencing platforms. Each set of mixes included two pyrimidine terminators with 17-atom linkers and two purine terminators with 10-atom linkers between the dye and the nucleotide. The two sets of cyanine dye-labeled terminators chosen for this cycle sequencing study produced improved band patterns with band uniformity similar to that obtained with dye-primer sequencing methods.     

Conformational Dynamics of Thermus aquaticus DNA Polymerase I during Catalysis

Despite the fact that DNA polymerases have been investigated for many years and are commonly used as tools in a number of molecular biology assays, many details of the kinetic mechanism they use to catalyze DNA synthesis remain unclear. Structural and kinetic studies have characterized a rapid, pre-catalytic open-to-close conformational change of the Finger domain during nucleotide binding for many DNA polymerases including Thermus aquaticus DNA polymerase I (Taq Pol), a thermostable enzyme commonly used for DNA amplification in PCR. However, little has been performed to characterize the motions of other structural domains of Taq Pol or any other DNA polymerase during catalysis. Here, we used stopped-flow Förster resonance energy transfer to investigate the conformational dynamics of all five structural domains of the full-length Taq Pol relative to the DNA substrate during nucleotide binding and incorporation. Our study provides evidence for a rapid conformational change step induced by dNTP binding and a subsequent global conformational transition involving all domains of Taq Pol during catalysis. Additionally, our study shows that the rate of the global transition was greatly increased with the truncated form of Taq Pol lacking the N-terminal domain. Finally, we utilized a mutant of Taq Pol containing a de novo disulfide bond to demonstrate that limiting protein conformational flexibility greatly reduced the polymerization activity of Taq Pol.     

Fluorescent in situ sequencing on polymerase colonies

Integration of DNA isolation, amplification, and sequencing can be achieved by the use of polymerase colonies (polonies) and cycles of fluorescent dNTP incorporation. In this paper, we present four advances that bring us closer to sequencing genomes cost-effectively using the polony technology. First, a polymerase trapping technique enables efficient nucleotide extension by DNA polymerase in a polyacrylamide matrix and eliminates loss of enzyme during sequencing cycles. Next, we present two novel types of reversibly dye-labeled nucleotide analogues, show that DNA polymerase can incorporate these analogues, and demonstrate that the dyes can be removed by thiol reduction or light exposure. Using these nucleotides, we have sequenced multiple polonies in parallel. In addition, we have found that a high density of polonies can be achieved with minimal overlap between adjacent polonies by limiting the concentration of free primer in the polony amplification reactions. Finally, we have developed software for automated image alignment and sequence calling.     

The roles of Tyr391 and Tyr619 in RB69 DNA polymerase replication fidelity

In the family-B DNA polymerase of bacteriophage RB69, the conserved aromatic palm-subdomain residues Tyr391 and Tyr619 interact with the last primer-template base-pair. Tyr619 interacts via a water-mediated hydrogen bond with the phosphate of the terminal primer nucleotide. The main-chain amide of Tyr391 interacts with the corresponding template nucleotide. A hydrogen bond has been postulated between Tyr391 and the hydroxyl group of Tyr567, a residue that plays a key role in base discrimination. This hydrogen bond may be crucial for forcing an infrequent Tyr567 rotamer conformation and, when the bond is removed, may influence fidelity. We investigated the roles of these residues in replication fidelity in vivo employing phage T4 rII reversion assays and an rI forward assay. Tyr391 was replaced by Phe, Met and Ala, and Tyr619 by Phe. The Y391A mutant, reported previously to decrease polymerase affinity for incoming nucleotides, was unable to support DNA replication in vivo, so we used an in vitro fidelity assay. Tyr391F/M replacements affect fidelity only slightly, implying that the bond with Tyr567 is not essential for fidelity. The Y391A enzyme has no mutator phenotype in vitro. The Y619F mutant displays a complex profile of impacts on fidelity but has almost the same mutational spectrum as the parental enzyme. The Y619F mutant displays reduced DNA binding, processivity, and exonuclease activity on single-stranded DNA and double-stranded DNA substrates. The Y619F substitution would disrupt the hydrogen bond network at the primer terminus and may affect the alignment of the 3' primer terminus at the polymerase active site, slowing chemistry and overall DNA synthesis.     

Thermus aquaticus DNA polymerase I mutants with altered fidelity. Interacting mutations in the O-helix

Phe(667) in the conserved O-helix of Thermus aquaticus (Taq) DNA polymerase I (pol I) is known to be important for discrimination against dideoxy-NTPs. We show here that Phe(667) is also important for base selection fidelity. In a forward mutation assay at high polymerase concentration, wild type pol I catalyzed frequent A --> T and G --> T transversions and -1 frameshifts at nonreiterated sites involving loss of a purine immediately downstream of a pyrimidine. The mutants F667L and A661E,I665T,F667L exhibited large decreases in A --> T and G --> T transversions, and the triple mutant displayed reduction in the aforementioned -1 frameshifts as well. Kinetic analysis showed that the F667L and A661E,I665T,F667L polymerases discriminated against synthesis of A:A mispairs more effectively and catalyzed less extension of A:A mispairs than the wild type enzyme. These data indicate that Phe(667) functions in maintaining the error frequency and spectrum, and the catalytic efficiency, of wild type pol I. We also found that the strong general mutator activity conferred by the single A661E substitution was entirely suppressed in the A661E, I665T,F667L polymerase, exemplifying how interactions among O-helix residues can contribute to fidelity. We discuss the mutator and anti-mutator mutations in light of recently obtained three-dimensional structures of T. aquaticus pol I.     

Design and synthesis of a photocleavable biotinylated nucleotide for DNA analysis by mass spectrometry

We report here the design, synthesis and evaluation of a novel photocleavable (PC) biotinylated nucleotide analog, dUTP-PC-Biotin, for DNA polymerase extension reaction to isolate DNA products for mass spectrometry (MS) analysis. This nucleotide analog has a biotin moiety attached to the 5-position of 2′-deoxyribouridine 5′-triphosphate via a photocleavable 2-nitrobenzyl linker. We have demonstrated that dUTP-PC-Biotin can be faithfully incorporated by the DNA polymerase Thermo Sequenase into the growing DNA strand in a DNA polymerase extension reaction and that its incorporation does not hinder the addition of the subsequent nucleotide. Therefore, the DNA extension fragments generated by using the dUTP-PC-Biotin can be efficiently isolated by a streptavidin-coated surface and recovered by near-UV light irradiation at room temperature in mild condition for further analysis without using any chemicals or heat. Single and multiple primer extension reactions were performed using the dUTP-PC-Biotin to generate DNA products for MALDI-TOF MS analysis. Such nucleotide analogs that carry a biotin and a photocleavable linker will allow the isolation and purification of DNA products under mild conditions for MS-based genetic analysis by DNA sequencing or multiplex single nucleotide polymorphism (SNP) detection. Furthermore, these nucleotide analogs should also be useful in isolating DNA–protein complexes under non-denaturing conditions.     

DNA sequencing with dye-labeled terminators and T7 DNA polymerase: effect of dyes and dNTPs on incorporation of dye-terminators and probability analysis of termination fragments.

The incorporation of fluorescently labeled dideoxynucleotides by T7 DNA polymerase is optimized by the use of Mn2+, fluorescein analogs and four 2'-deoxyribonucleoside 5'-O-(1-thiotriphosphates) (dNTP alpha S's). The one-tube extension protocol was tested on single-stranded templates, as well as PCR fragments which were made single-stranded by digestion with T7 gene 6 exonuclease. Dye primer sequencing using four dNTP alpha S's was shown to give uniform termination patterns which were comparable to four dNTPs. Efficiency of the polymerase also appeared to improve with the dNTP alpha S's. A mathematical model was developed to predict the pattern of termination based on enzyme activity and ratios of ddNTP/dNTPs. This method can be used to optimize sequencing reactions and to estimate enzyme discrimination constants of chain terminators.     

A new paradigm for DNA polymerase specificity

We show that T7 DNA polymerase exists in three distinct structural states, as reported by a conformationally sensitive fluorophore attached to the recognition (fingers) domain. The conformational change induced by a correct nucleotide commits the substrate to the forward reaction, and the slow reversal of the conformational change eliminates the rate of the chemistry step from any contribution toward enzyme specificity. Discrimination against mismatches is enhanced by the rapid release of mismatched nucleotides from the ternary E.DNA.deoxynucleoside triphosphate complex and by the use of substrate-binding energy to actively misalign catalytic residues to reduce the rate of misincorporation. Our refined model for enzyme selectivity extends traditional thermodynamic formalism by including substrate-induced structural alignment or misalignment of catalytic residues as a third dimension on the free-energy profile and by including the rate of substrate dissociation as a key kinetic parameter.