Physical and genetic characterization of cloned enterobactin genomic sequences from Escherichia coli K-12

We have cloned genes responsible for enterobactin synthesis (entD) and transport (fepA,fes) from Escherichia coli K-12. Relevant recombinant plasmids enabled EntD- and transport-defective mutants to grow on iron-limiting medium. Subcloning and deletion analysis demonstrated that the gene order is entD-fepA-fes. Protein synthesis studies in minicells suggest that FepA is first translated as an Mr 84 000 precursor, which is subsequently cleaved to the active Mr 81 000 receptor; the fes gene product is an Mr 44 000 protein; no polypeptide has been identified as the entD gene product.     

Physical and biochemical characterization of cloned sbcB and xonA mutations from Escherichia coli K-12.

In Escherichia coli K-12, sbcB/xonA is the structural gene for exonuclease I, an enzyme that hydrolyzes single-stranded DNA to mononucleotides in the 3'-to-5' direction. This enzyme has been implicated in the DNA repair and recombination pathways mediated by the recB and recC gene products (exonuclease V). We have cloned several sbcB/xonA mutant alleles in bacterial plasmids and have partially characterized the cloned genes and their protein products. Two of the mutations (xonA2 and xonA6) retain no detectable exonucleolytic activity on single-stranded DNA. The xonA6 allele was shown to harbor an insertion of an IS30-related genetic element near the 3' end of the gene. Two other mutations, sbcB15 and xonA8, exhibited significantly reduced levels of exonuclease I activity as compared to the cloned wild-type gene. A correlation was observed between levels of exonuclease I activity and the ability of the sbcB/xonA mutations to suppress UV sensitivity in recB and recC strains. Also, recombinant plasmids bearing either the sbcB15 or xonA6 allele exhibited a high degree of instability during growth of their bacterial hosts. The results suggest that the sbcB/xonA gene product is a bi- or multifunctional protein that interacts with single-stranded DNA and possibly with other proteins in the suppression of genetic recombination and DNA-repair deficiencies in recB and recC mutants.     

Purification and characterization of Escherichia coli endonuclease III from the cloned nth gene

The gene which codes for endonuclease III of Escherichia coli has been sequenced. The nth gene was previously subcloned and defined as the gene which led to overproduction of endonuclease III when present on a multicopy plasmid and which created a deficiency in endonuclease III activity when mutated. The nth gene was sequenced and translated into a predicted polypeptide. The molecular weight (23,546), the amino-terminal amino acid sequence, and the amino acid composition of the polypeptide predicted from the nucleotide sequence are excellent agreement with those same properties determined for the purified protein. Thus, the nth gene is the structural gene for endonuclease III. Inspection of the nucleotide sequence reveals that there is an open reading frame immediately upstream of the nth gene, suggesting that it might be part of an operon. There is a region of dyad symmetry which could form a hairpin stem and loop structure if transcribed into RNA characteristic of a rho-dependent terminator downstream from the nth gene. The nth gene of Escherichia coli has been cloned onto a lambda PL expression vector which yields approximately 300-fold overproduction of endonuclease III. We have purified the enzyme to apparent homogeneity using two chromatographic steps. Our purification scheme allowed the preparation of 117 mg of protein from 190 g of E. coli with a 70% yield. The purified protein has both AP endonuclease activity and DNA N-glycosylase activity. The protein has a Stokes radius of 2.25 nm, a sedimentation coefficient of 2.65 S, a molecular weight of 26,300 in the native state and 27,300 in the denatured state, and a frictional ratio of 1.13.(ABSTRACT TRUNCATED AT 250 WORDS)     

New outer membrane-associated protease of Escherichia coli K-12.

The gene for a new outer membrane-associated protease, designated OmpP, of Escherichia coli has been cloned and sequenced. The gene encodes a 315-residue precursor protein possessing a 23-residue signal sequence. Including conservative substitutions and omitting the signal peptides, OmpP is 87% identical to the outer membrane protease OmpT. OmpP possessed the same enzymatic activity as OmpT. Immuno-electron microscopy demonstrated the exposure of the protein at the cell surface. Digestion of intact cells with proteinase K removed 155 N-terminal residues of OmpP, while the C-terminal half remained protected. It is possible that much of this N-terminal part is cell surface exposed and carries the enzymatic activity. Synthesis of OmpP was found to be thermoregulated, as is the expression of ompT (i.e., there is a low rate of synthesis at low temperatures) and, in addition, was found to be controlled by the cyclic AMP system.     

Purification and characterization of protease III from Escherichia coli.

An endoproteolytic enzyme of Escherichia coli, designated protease III, has been purified about 9,600-fold to homogeneity with a 6% yield. The purified enzyme consists of a single polypeptide chain of Mr 110,000 and is most active at pH 7.4. Protease III is very sensitive to metal-chelating agents and reducing agents. The EDTA-inactivated enzyme can be reactivated by Zn2+, Co2+ or Mn2+. Protease III is devoid of activity toward aminopeptidase, carboxypeptidase, or esterase substrates but rapidly degrades small proteins. When fragments of beta-galactosidase are used as substrates for protease III, the enzyme preferentially degrades proteins with molecular weights of less than 7,000. Protease III cleaves the oxidized insulin B chain at two sites with an initial rapid cleavage at Tyr-Leu (16-17) and a second slower cut at Phe-Tyr (25-26).     

Analysis of the regulatory region of the protease III (ptr) gene of Escherichia coli K-12

The ptr gene of Escherichia coli encodes protease III (Mr 110,000) and a 50-kDa polypeptide, both of which are found in the periplasmic space. The gene is physically located between the recC and recB loci on the E. coli chromosome. The nucleotide sequence of a 1167-bp EcoRV-ClaI fragment of chromosomal DNA containing the promoter region and 885 bp of the ptr coding sequence has been determined. S1 nuclease mapping analysis showed that the major 5' end of the ptr mRNA was localized 127 bp upstream from the ATG start codon. The open reading frame (ORF), preceded by a Shine-Dalgarno sequence, extends to the end of the sequenced DNA. Downstream from the -35 and -10 regions is a sequence that strongly fits the consensus sequence of known nitrogen-regulated promoters. A signal peptide of 23 amino acids residues is present at the N terminus of the derived amino acid sequence. The cleavage site as well as the ORF were confirmed by sequencing the N terminus of mature protease III.     

Cloning and characterization of Escherichia coli K-12 regulator gene tyrR.

The Escherichia coli K-12 regulator gene tyrR was cloned into the multicopy plasmid pBR322 from a lambda(Tn10)tyrR+ specialized transducing phage. Further subcloning localized the gene within a 2.1-kilobase region. Analysis of plasmid-coded proteins showed that the tyrR gene codes for a 63,000-dalton polypeptide.     

Isolation and characterization of the beta-ketoacyl-acyl carrier protein synthase III gene (fabH) from Escherichia coli K-12.

beta-Ketoacyl-acyl carrier protein (ACP) synthase III catalyzes the condensation of acetyl-CoA with malonyl-ACP in dissociated (Type II) fatty acid synthase systems. A synthase III mutant was used to localize the structural gene to the 24.5-min region of the Escherichia coli chromosome, and the defective synthase III allele was designated fabH1. The fabH gene was identified on a 1.3-kilobase NruI-HindIII chromosomal DNA fragment (plasmid pWO114) that complemented the enzymatic defect in fabH1 strains. The NruI-HindIII fragment was sequenced and contained a single open reading frame predicted to encode a 33,517-dalton protein with an isoelectric point of 4.85. The fabH sequence contained an Ala-Cys-Ala tripeptide characteristic of condensing enzyme active sites. A T7 expression system showed that the NruI-HindIII fragment directed the synthesis of a single 34,800-dalton protein. This protein was purified and the order of the amino-terminal 30 residues of the protein corresponded exactly to the amino acid structure predicted from the DNA sequence. The purified protein possessed both acetoacetyl-ACP synthase and acetyl-CoA:ACP transacylase activities, and cells harboring plasmid pWO114 overproduced the two activities, supporting the conclusion that a single protein carries out both reactions. Overproduction of synthase III resulted in a significant increase in shorter-chain fatty acids in the membrane phospholipids. These catalytic properties are consistent with the proposed role of synthase III in the initiation of fatty acid synthesis.     

Physical and biochemical analysis of the cloned recB and recC genes of Escherichia coli K-12.

A 19-kilobase BamHI fragment encoding the recB (exonuclease V), recC (exonuclease V), ptr (protease III), thyA, and argA genes of Escherichia coli K-12 was cloned into a multicopy plasmid (pCDK3). In E. coli maxicells, the plasmid specified the synthesis of seven polypeptides of 140,000 (recC), 128,000 (recB), 110,000 (ptr), 53,000 (argA), 50,000, 33,000 (thyA), and 22,000 Mr, as well as beta-lactamase and chloramphenicol acetyltransferase. From analysis of subclones and Tn1000 insertions, it appears that the 110,000- and 50,000-Mr proteins originated from the ptr DNA coding sequence which is located between the recB and recC genes. Although recC, ptr, and recB were physically closely linked and transcribed in the same direction, they do not appear to constitute an operon. Cells carrying pCDK3 contained a 30- to 50-fold increase in exonuclease V activity, without affecting cell viability.     

Isolation, cloning and characterization of argF gene DNA from Escherichia coli K-12.

A 1650 base pair (BP) fragment carrying the entire argF structural gene with its associated control regions was isolated from an EcoRI/BamHI digest of phi80argFilambda cI857 DNA. This segment was cloned using the EcoRI and BamHI cleavage sites in the plasmid pBR322. A preliminary restriction map of the argF region was prepared. RNA polymerase binding studies indicated that the argF promoter is located approx. 30 base pairs from the EcoRI terminus of the cloned DNA segment.     

Further characterization of a non-essential mutator gene in Escherichia coli K-12.

The properties of mutR, a mutator closely linked to thyA, have been further characterized. We have found that the mutator gene is carried on a specialized transducing phage (lambdapcI857 thyA) generated by the excision of lambdacI857 integrated at a secondary attachment site between lysA and thyA. We present three lines of evidence indicating that mutR is a nonessential gene. (i) Deletions of the mutator can be found amoung survivors of heat induction of lambdacI857 when the phage is integrated between lysA and thyA. (ii) Mutations in mutR can be induced with the frameshift mutagen ICR-191. (iii) An amber mutant in mutR has been found. Viable strains could be made by combining the mutator with polB, polA polR, ligts7, and uvrA mutations. The mutator was still able to increase the spontaneous mutation frequency in these genetic backgrounds. When the reversion patterns of a series of well-characterized trpA mutations were analyzed, the results suggested that mutR is more efficient at causing transitions than transversion mutations.     

Cloning of the Escherichia coli K-12 hemB gene.

An Escherichia coli heme-requiring, heme-permeable mutant had no detectable 5-aminolevulinate dehydratase or porphobilinogen deaminase activities. The gene which complemented this mutation was cloned to a high-copy-number plasmid, and porphobilinogen deaminase activity was restored to normal levels, but the synthesis of 5-aminolevulinate dehydratase increased 20- to 30-fold. A maxicell procedure confirmed that the gene cloned was hemB.     

rhs gene family of Escherichia coli K-12.

Two additional members of a novel Escherichia coli gene family, the rhs genes, have been cloned and characterized. The structures of these loci, rhsC and rhsD, have been compared with those of rhsA and rhsB. All four loci contain a homologous 3.7-kilobase-pair core. Sequence comparison of the first 300 nucleotides of the cores showed that rhsA, rhsB, and rhsC are closely related, with only 1 to 2% sequence divergence, whereas rhsD is 18% divergent from the others. The beginning of the core coincides with the initiation of an open reading frame that extends beyond the 300 nucleotides compared. Whether a protein product is produced from this open reading frame has not been established. However, nucleotide substitutions which differentiate the cores have highly conservative effects on the predicted protein products; this suggests that products are made from the open reading frame and are under severe selection. The four rhs loci have been placed on both the genetic and restriction maps of E. coli K-12. A fifth rhs locus remains to be characterized. In terms of size, number, and sequence conservation, the rhs genes make up one of the most significant repetitions in E. coli, comparable to the rRNA operons.     

Suppression of the defects in rdgB mutants of Escherichia coli K-12 by the cloned purA gene.

A gene suppressing the defects of Escherichia coli rdgB (recA-dependent growth) and recA(Ts) rdgB mutants was cloned. The cloned gene suppresses the hyper-Rec phenotype and the enhanced level of SOS functions in rdgB mutants at the nonpermissive temperature. We identified the cloned gene as purA.     

Cloning and characterization of the gene encoding inorganic pyrophosphatase of Escherichia coli K-12.

Escherichia coli K-12 gene ppa encoding inorganic pyrophosphatase (PPase) was cloned and sequenced. The 5' end of the ppa mRNA was identified by primer extension mapping. A typical E. coli sigma 70 promoter was identified immediately upstream of the mRNA 5' end. The structural gene of ppa contains 528 base pairs, from which a 175-amino-acid translation product, Mr 19,572, was deduced. The deduced amino acid composition perfectly fitted with that of PPase as previously determined (P. Burton, D. C. Hall, and J. Josse, J. Biol. Chem. 245:4346-4351, 1970). Furthermore, the partial amino acid sequence (residues 1 to 108) of E. coli PPase determined by S. A. Cohen (Ph.D. thesis, University of Chicago, 1978) was the same as that deduced from the nucleotide sequence. This is the first report of the cloning of a PPase gene.