Seedling dynamics of <Emphasis Type="Italic">Acer mono</Emphasis> and <Emphasis Type="Italic">Fagus crenata</Emphasis>: an environmental filter limiting their adult distributions

Spatial pattern of a biotic population may change over time as its component individuals grow or die out, but whether this is the case for desert annual plants is largely unknown. Here we examined seasonal changes in spatial patterns of two annuals, Eriogonum abertianum and Haplopappus gracilis, in initial (winter) and final (summer) densities. The density was measured as the number of individuals from 384 permanent quadrats (each 0.5 m × 0.5 m) in the Chihuahuan Desert near Portal, Arizona, USA. We used three probability distributions (binomial, Poisson, and negative binomial or NB) that represent three basic spatial patterns (regular, random, and clumped) to fit the observed frequency distributions of densities of the two annuals. Both species showed clear clumped patterns as characterized by the NB and had similar inverse J-shaped frequency distribution curves in two density categories. Also, both species displayed a reduced degree of aggregation from winter to summer after the spring drought (massive die-off), as indicated by the increased k-parameter of the NB and decreased values of another NB parameter p, variance/mean ratio, Lloyd’s Index of Patchiness, and David and Moore’s Index of Clumping. Further, we hypothesized that while the NB (i.e., Poisson-logarithmic) well fits the distribution of individuals per quadrat, its components, the Poisson and logarithmic, may describe the distributions of clumps per quadrat and of individuals per clump, respectively. We thus obtained the means and variances for (1) individuals per quadrat, (2) clumps per quadrat, and (3) individuals per clump. The results showed that the decrease of the density from winter to summer for each plant resulted from the decrease of individuals per clump, rather than from the decrease of clumps per quadrat. The great similarities between the two annuals indicate that our observed temporal changes in spatial patterns may be common among desert annual plants.     

Studies of Ca<Superscript>2+</Superscript> ATPase (SERCA) Inhibition

The Ca²⁺ transport ATPase of intracellular membranes (SERCA) can be inhibited by a series of chemical compounds such as Thapsigargin (TG), 2,5-di(tert-butyl)hydroquinone (DBHQ) and 1,3-dibromo-2,4,6-tris (methyl-isothio-uronium) benzene (Br₂-TITU). These compounds have specific binding sites in the ATPase protein, and different mechanisms of inhibition. On the other hand, SERCA gene silencing offers a convenient and specific method for suppression of SERCA activity in cells. The physiological and pharmacological implications of SERCA inhibition are discussed.     

Biofortification of crops with seven mineral elements often lacking in human diets – iron, zinc, copper, calcium, magnesium, selenium and iodine

The diets of over two-thirds of the world's population lack one or more essential mineral elements. This can be remedied through dietary diversification, mineral supplementation, food fortification, or increasing the concentrations and/or bioavailability of mineral elements in produce (biofortification). This article reviews aspects of soil science, plant physiology and genetics underpinning crop biofortification strategies, as well as agronomic and genetic approaches currently taken to biofortify food crops with the mineral elements most commonly lacking in human diets: iron (Fe), zinc (Zn), copper (Cu), calcium (Ca), magnesium (Mg), iodine (I) and selenium (Se). Two complementary approaches have been successfully adopted to increase the concentrations of bioavailable mineral elements in food crops. First, agronomic approaches optimizing the application of mineral fertilizers and/or improving the solubilization and mobilization of mineral elements in the soil have been implemented. Secondly, crops have been developed with: increased abilities to acquire mineral elements and accumulate them in edible tissues; increased concentrations of 'promoter' substances, such as ascorbate, β-carotene and cysteine-rich polypeptides which stimulate the absorption of essential mineral elements by the gut; and reduced concentrations of 'antinutrients', such as oxalate, polyphenolics or phytate, which interfere with their absorption. These approaches are addressing mineral malnutrition in humans globally.     

Resonance light scattering spectrometric study of poly diallyldimethylammonium chloride–antibody–antigen system

The interaction of antigen (Ag) and antibody (Ab) with poly diallyldimethylammonium chloride (PDDA) in aqueous solutions has been studied by optical absorption and resonance light‐scattering (RLS) spectroscopies. The formation of the three‐component‐complex is due to aggregates of Ab or Ag with PDDA by electrostatic interaction and aggregates of Ab with Ag by immunoreaction. The influences of some experimental factors, including incubation time, pH value, concentration of PDDA and concentration of Ab, on the aggregation process have also been studied. A linear relationship between the concentration of Ag and the RLS intensity was found. Under the optimal conditions, for a given concentration of Ab (4.6 µg/mL), the enhancement of RLS intensity is in proportion to the concentration of Ag in the range 0.03–0.83 µg/mL. The RLS could, in combination with immunoassay, be a rapid and sensitive detection method for Ag. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and application of Nα‐Fmoc‐Nπ‐4‐methoxybenzyloxymethylhistidine in solid phase peptide synthesis

The 4‐methoxybenzyloxymethyl (MBom) group was introduced at the N^π‐position of the histidine (His) residue by using a regioselective procedure, and its utility was examined under standard conditions used for the conventional and the microwave (MW)‐assisted solid phase peptide synthesis (SPPS) with 9‐fluorenylmethyoxycarbonyl (Fmoc) chemistry. The N^π‐MBom group fulfilling the requirements for the Fmoc strategy was found to prevent side‐chain‐induced racemization during incorporation of the His residue even in the case of MW‐assisted SPPS performed at a high temperature. In particular, the MBom group proved to be a suitable protecting group for the convergent synthesis because it remains attached to the imidazole ring during detachment of the protected His‐containing peptide segments from acid‐sensitive linkers by treatment with a weak acid such as 1% trifluoroacetic acid in dichloromethane. We also demonstrated the facile synthesis of Fmoc‐His(π‐MBom)‐OH with the aid of purification procedure by crystallization to effectively remove the undesired τ‐isomer without resorting to silica gel column chromatography. This means that the present synthetic procedure can be used for large‐scale production without any obstacles. Copyright © 2012 European Peptide Society and John Wiley & Sons, Ltd.     

Actinomycetemcomitin: a new bacteriocin produced by <Emphasis Type="Italic">Aggregatibacter</Emphasis> (<Emphasis Type="Italic">Actinobacillus</Emphasis>) <Emphasis Type="Italic">actinomycetemcomitans</Emphasis>

Aggregatibacter (Actinobacillus) actinomycetemcomitans P_7–20 strain isolated from a periodontally diseased patient has produced a bacteriocin (named as actinomycetemcomitin) that is active against Peptostreptococcus anaerobius ATCC 27337. Actinomycetemcomitin was produced during exponential and stationary growth phases, and its amount decreased until it disappeared during the decline growth phase. It was purified by ammonium sulphate precipitation (30–60% saturation), and further by FPLC (mono-Q ionic exchange and Phenyl Superose hydrophobic interaction) and HPLC (C-18 reversed-phase). This bacteriocin loses its activity after incubation at a pH below 7.0 or above 8.0, following heating for 30 min at 45°C, and after treatment with proteolytic enzymes such as trypsin, α-chymotrypsin, and papain. Actinomycetemcomitin has a molecular mass of 20.3 KDa and it represents a new bacteriocin from A. actinomycetemcomitans.     

Solvent roles in metal ion coordination: the NiCl2O-solvates, NiCl2 · 4MeOH, NiCl2 · 2MeOH · 0.5dioxan and NiCl2 · 2H2O · 2dioxan

Low-temperature, single crystal X-ray structural characterisations of trans-[NiCl₂(HOMe)₄], trans-O-[Ni(MeOH)₂(μ-Cl)_(2/2)2]_(∞∣∞) · 0.5dioxan and trans-trans-[Ni(H₂O)₂Cl₂(O-dioxan-O)_(2/2)]_(∞∣∞) · dioxan are recorded, offering intriguing insights into O-donor/Ni(II) relativities. All nickel atoms in all structures are located on crystallographic inversion centres, the last two compounds being one-dimensional polymers.     

Combined MRI–PET dissects dynamic changes in plant structures and functions

Unravelling the factors determining the allocation of carbon to various plant organs is one of the great challenges of modern plant biology. Studying allocation under close to natural conditions requires non-invasive methods, which are now becoming available for measuring plants on a par with those developed for humans. By combining magnetic resonance imaging (MRI) and positron emission tomography (PET), we investigated three contrasting root/shoot systems growing in sand or soil, with respect to their structures, transport routes and the translocation dynamics of recently fixed photoassimilates labelled with the short-lived radioactive carbon isotope ¹¹C. Storage organs of sugar beet ( Beta vulgaris ) and radish plants ( Raphanus sativus ) were assessed using MRI, providing images of the internal structures of the organs with high spatial resolution, and while species-specific transport sectoralities, properties of assimilate allocation and unloading characteristics were measured using PET. Growth and carbon allocation within complex root systems were monitored in maize plants ( Zea mays ), and the results may be used to identify factors affecting root growth in natural substrates or in competition with roots of other plants. MRI–PET co-registration opens the door for non-invasive analysis of plant structures and transport processes that may change in response to genomic, developmental or environmental challenges. It is our aim to make the methods applicable for quantitative analyses of plant traits in phenotyping as well as in understanding the dynamics of key processes that are essential to plant performance.     

The study of renin–angiotensin–aldosterone in experimental diabetes mellitus

It is generally accepted that hypertension and other vascular pathologies increase in diabetes mellitus (DM) patients as a result of the renin–angiotensin–aldosterone (RAA) system. In this study, changes in the renin‐angiotensin‐aldosterone (RAA) system level was determined in Streptozotocin (STZ)‐injected rats. A total of 46 female Wistar albino rats (180–220 g body weight) was utilized in these experiments. STZ was given intraperitoneally to induce diabetes in rats. Streptozotocin (60 mg kg⁻¹ body weight) was dissolved in 0·1 m citrate–‐phosphate buffer (pH 4–5). The non‐diabetic rats were injected with sterilized buffer alone to act as a control group. Blood glucose levels were 398±8·2 mg dl⁻¹, 488±11·75 mg dl⁻¹ and 658±29·6 mg dl⁻¹ at days 3, 12 and 30 respectively. The level of plasma renin activity (PRA) was measured as 7·69±1·07 ng ml⁻¹ h⁻¹; 1·82±0·22 ng ml⁻¹ h⁻¹ and 0·67±0·12 ng ml⁻¹ h⁻¹ at days 3, 12 and 30, respectively. These values showed that the PRA levels are decreased with increased time period. Serum angiotensin converting enzyme (ACE, E.C. 3.4.15.1) levels were increased at days 12 and 30 (p<0·05 and p<0·005), whereas serum aldosterone levels were increased at days 3 and 12 (p<0·05). The level of urea and creatinine increased at days 12 and 30 (p<0·05 and p<0·005, respectively) when compared to the control group. The data from these experiments indicate that the PRA level decreased whereas ACE activity level increased in diabetic rats compared with the control. Aldosterone levels increased at the first stage of the experiment, but then decreased by the end of the experiment as a result of changes in renin and ACE levels. Copyright © 1999 John Wiley & Sons, Ltd.     

Solvatochromic studies in polyethylene glycol–salt aqueous biphasic systems

The polarities of the co-existing phases of a polyethylene glycol (PEG)-2000–K₃PO₄ aqueous biphasic system (ABS) have been examined using Reichardt’s carboxylated pyridinium-N-phenoxybetaine dye as a probe. Using this probe, the polarities of these phases have been compared to those of conventional solvent extraction systems and micellar systems using values obtained from the literature. In general, these extraction systems are comparable in polarity to rather polar solvents. Data on the free energy of transfer of solvents suggests that this may be due to the failure of the probe to account for the real polarity of the salt-rich phase compared to the polymer-rich phase. Examination of the monophasic region of these systems suggests that the reason for this is that the probe is partitioned to a discreet solvent domain dominated by PEG, even though phase separation of the solution is not observed. The use of linear free energy relationships for the characterization of ABS is briefly discussed.