Identification of a region of the bacteriophage T3 and T7 RNA polymerases that determines promoter specificity

Bacteriophages T7 and T3 encode DNA-dependent RNA polymerases that are 82% homologous, yet exhibit a high degree of specificity for their own promoters. A region of the RNA polymerase gene (gene 1) that is responsible for this specificity has been localized using two approaches. First, the RNA polymerase genes of recombinant T7 x T3 phage that had been generated in other laboratories in studies of phage polymerase specificity were characterized by restriction enzyme mapping. This approach localized the region that determines promoter specificity to the 3' end of the polymerase gene, corresponding to the carboxyl end of the polymerase protein distal to amino acid 623. To define more closely the region of promoter specificity, a series of hybrid T7/T3 RNA polymerase genes was constructed by in vitro manipulation of the cloned genes. The specificity of the resulting hybrid RNA polymerases in vitro and in vivo indicates that an interval of the polymerase that spans amino acids 674 to 752 (the 674 to 752 interval) contains the primary determinant of promoter preference. Within this interval, the amino acid sequences of the T3 and T7 enzymes differ at only 11 out of 79 positions. It has been shown elsewhere that specific recognition of T3 and T7 promoters depends largely upon base-pairs in the region from -10 to -12. An analysis of the preference of the hybrid RNA polymerases for synthetic T7 promoter mutants indicates that the 674 to 752 interval is involved in identifying this region of the promoter, and suggests that another domain of the polymerase (which has not yet been identified) may be involved in identifying other positions where the two consensus promoter sequences differ (most notably at position -15).     

A General Mechanism for Viral Resistance to Suicide Gene Expression

Bacteriophage T7 was challenged with either of two toxic genes expressed from plasmids. Each plasmid contained a different gene downstream of a T7 promoter; cells harboring each plasmid caused an infection by wild-type T7 to abort. T7 evolved resistance to both inhibitors by avoidance of the plasmid expression system rather than by blocking or bypassing the effects of the specific toxic gene product. Resistance was due to a combination of mutations in the T7 RNA polymerase and other genes expressed at the same time as the polymerase. Mutations mapped to sites that are unlikely to alter polymerase specificity for its cognate promoter but the basis for discrimination between phage and plasmid promoters in vivo was not resolved. A reporter assay indicated that, relative to wild-type phage, gene expression from the plasmid was diminished several-fold in cells infected by the evolved phages. A recombinant phage, derived from the original mutant but lacking a mutation in the gene for RNA polymerase, exhibited intermediate activity in the reporter assay and intermediate resistance to the toxic gene cassettes. Alterations in both RNA polymerase and a second gene are thus responsible for resistance. These findings have broad evolutionary parallels to other systems in which viral inhibition is activated by viral regulatory signals such as defective-interfering particles, and they may have mechanistic parallels to the general phenomena of position effects and gene silencing. Received: 18 July 2000 / Accepted: 8 February 2001     

Complete genomic sequence of bacteriophage phiEcoM-GJ1, a novel phage that has myovirus morphology and a podovirus-like RNA polymerase

The complete genome of phiEcoM-GJ1, a lytic phage that attacks porcine enterotoxigenic Escherichia coli of serotype O149:H10:F4, was sequenced and analyzed. The morphology of the phage and the identity of the structural proteins were also determined. The genome consisted of 52,975 bp with a G+C content of 44% and was terminally redundant and circularly permuted. Seventy-five potential open reading frames (ORFs) were identified and annotated, but only 29 possessed homologs. The proteins of five ORFs showed homology with proteins of phages of the family Myoviridae, nine with proteins of phages of the family Podoviridae, and six with proteins of phages of the family Siphoviridae. ORF 1 encoded a T7-like single-subunit RNA polymerase and was preceded by a putative E. coli sigma(70)-like promoter. Nine putative phage promoters were detected throughout the genome. The genome included a tRNA gene of 95 bp that had a putative 18-bp intron. The phage morphology was typical of phages of the family Myoviridae, with an icosahedral head, a neck, and a long contractile tail with tail fibers. The analysis shows that phiEcoM-GJ1 is unique, having the morphology of the Myoviridae, a gene for RNA polymerase, which is characteristic of phages of the T7 group of the Podoviridae, and several genes that encode proteins with homology to proteins of phages of the family Siphoviridae.     

Structure of T7 RNA polymerase complexed to the transcriptional inhibitor T7 lysozyme.

The T7 RNA polymerase-T7 lysozyme complex regulates phage gene expression during infection of Escherichia coli. The 2.8 A crystal structure of the complex reveals that lysozyme binds at a site remote from the polymerase active site, suggesting an indirect mechanism of inhibition. Comparison of the T7 RNA polymerase structure with that of the homologous pol I family of DNA polymerases reveals identities in the catalytic site but also differences specific to RNA polymerase function. The structure of T7 RNA polymerase presented here differs significantly from a previously published structure. Sequence similarities between phage RNA polymerases and those from mitochondria and chloroplasts, when interpreted in the context of our revised model of T7 RNA polymerase, suggest a conserved fold.     

Genome of Xanthomonas oryzae bacteriophage Xp10: an odd T-odd phage

Xp10 is a lytic bacteriophage of the phytopathogenic bacterium Xanthomonas oryzae. Though morphologically Xp10 belongs to the Syphoviridae family, it encodes its own single-subunit RNA polymerase characteristic of T7-like phages of the Podoviridae family. Here, we report the determination and analysis of the 44,373 bp sequence of the Xp10 genome. The genome is a linear, double-stranded DNA molecule with 3' cohesive overhangs and no terminal repeats or redundancies. Half of the Xp10 genome contains genes coding for structural proteins and host lysis functions in an arrangement typical for temperate dairy phages that are related to the Escherichia coli lambda phage. The other half of the Xp10 genome contains genes coding for factors of host gene expression shut-off, enzymes of viral genome replication and expression. The two groups of genes are transcribed divergently and separated by a regulatory region, which contains divergent promoters recognized by the host RNA polymerase. Xp10 has apparently arisen through a recombination between genomes of widely different phages. Further evidence of extensive gene flux in the evolution of Xp10 includes a high fraction (10%) of genes derived from an HNH-family endonuclease, and a DNA-dependent DNA polymerase that is closer to a homolog from Leishmania than to DNA polymerases from other phages or bacteria.     

Essential lysine residues in the RNA polymerase domain of the gene 4 primase-helicase of bacteriophage T7.

At a replication fork DNA primase synthesizes oligoribonucleotides that serve as primers for the lagging strand DNA polymerase. In the bacteriophage T7 replication system, DNA primase is encoded by gene 4 of the phage. The 63-kDa gene 4 protein is composed of two major domains, a helicase domain and a primase domain located in the C- and N-terminal halves of the protein, respectively. T7 DNA primase recognizes the sequence 5'-NNGTC-3' via a zinc motif and catalyzes the template-directed synthesis of tetraribonucleotides pppACNN. T7 DNA primase, like other primases, shares limited homology with DNA-dependent RNA polymerases. To identify the catalytic core of the T7 DNA primase, single-point mutations were introduced into a basic region that shares sequence homology with RNA polymerases. The genetically altered gene 4 proteins were examined for their ability to support phage growth, to synthesize functional primers, and to recognize primase recognition sites. Two lysine residues, Lys-122 and Lys-128, are essential for phage growth. The two residues play a key role in the synthesis of phosphodiester bonds but are not involved in other activities mediated by the protein. The altered primases are unable to either synthesize or extend an oligoribonucleotide. However, the altered primases do recognize the primase recognition sequence, anneal an exogenous primer 5'-ACCC-3' at the site, and transfer the primer to T7 DNA polymerase. Other lysines in the vicinity are not essential for the synthesis of primers.     

Specific contacts between the bacteriophage T3, T7, and SP6 RNA polymerases and their promoters

The specificity and structural simplicity of the bacteriophage T3, T7, and SP6 RNA polymerases make these enzymes particularly well suited for studies of polymerase-promoter interactions. To understand the initial recognition process between the enzyme and its promoters, DNA fragments that carry phage promoters were chemically modified by three different methods: base methylation, phosphate ethylation, and base removal. The positions at which these modifications prevented or enhanced binding by the RNA polymerases were then determined. The results indicate that specific contacts within the major groove of the promoter between positions-5 and -12 are important for phage polymerase binding. Removal of individual bases from either strand of the initiation region (-5 to +3) resulted in enhanced binding of the polymerase, suggesting that disruption of the helix in this region may play a role in stabilization of the polymerase-promoter complexes.     

Recombination between bacteriophage lambda and plasmid pBR322 in Escherichia coli

Recombinant lambda phages were isolated that resulted from recombination between the lambda genome and plasmid pBR322 in Escherichia coli, even though these deoxyribonucleic acids (DNAs) did not share extensive regions of homology. The characterization of these recombinant DNAs by heteroduplex analysis and restriction endonucleases is described. All but one of the recombinants appeared to have resulted from reciprocal recombination between a site on lambda DNA and a site on the plasmid. In general, there were two classes of recombinants. One class appeared to have resulted from recombination at the phage attachment site that probably resulted from lambda integration into secondary attachment sites on the plasmid. Seven different secondary attachment sites on pBR322 were found. The other class resulted from plasmid integration at other sites that were widely scattered on the lambda genome. For this second class of recombinants, more than one site on the plasmid could recombine with lambda DNA. Thus, the recombination did not appear to be site specific with respect to lambda or the plasmid. Possible mechanisms for generating these recombinants are discussed.     

Construction of a gene library using partial filling of DNA sticky ends

To prepare gene libraries, the incomplete filling of protruding ends has been used. DNAs from phages EMBL 3 and EMBL 3a were sequentially digested with SalI and EcoRI, followed by addition of dTTP, dCTP, and DNA polymerase I (Klenow's fragment). Separately, a genomic DNA was partially cleaved with Sau3AI, followed by addition of dATP, dGTP, and Klenow's fragment. The fragmented phage and genomic DNAs were mixed and ligated, and the recombinant DNAs packed in vitro with the phage proteins. The effectiveness of packaging per microgram of genomic DNA was 10(5) to 10(6) (for the wild phage DNA, 10(7)). The proposed procedure is very rapid and needs only microgram quantities of genomic DNA for preparing a representative gene library. It is also useful for other vectors, containing SalI sites.