Purification and characterization of an endoglucanase from the cellulosomes (multicomponent cellulase complexes) of Clostridium thermocellum.

A subunit with carboxymethyl cellulase (CMCase) activity was isolated from the cellulosomes of Clostridium thermocellum after dissociation of the cellulosomes by a mild sodium dodecyl sulfate (SDS) treatment. The subunit displayed only one protein band of 51 kDa on SDS-polyacrylamide gel electrophoresis (SDS-PAGE), but after boiling with SDS it had 3 bands of 60, 56, and 48 kDa. Prolonged incubation with SDS changed the subunit to display exclusively the 48-kDa band after boiling. The 51-kDa subunit was presumably a partially denatured form, and differentiated into 3 species with apparent M(r) of 60, 56, and 48 k through deglycosylation in SDS solution. Enzymatic properties of the 51-kDa subunit resembled those of the endoglucanase A which was purified from the culture fluid and from a E. coli clone with exceptions of temperature and pH optima.     

Electrotransformation of Clostridium thermocellum

Electrotransformation of several strains of Clostridium thermocellum was achieved using plasmid pIKm1 with selection based on resistance to erythromycin and lincomycin. A custom-built pulse generator was used to apply a square 10-ms pulse to an electrotransformation cuvette consisting of a modified centrifuge tube. Transformation was verified by recovery of the shuttle plasmid pIKm1 from presumptive transformants of C. thermocellum with subsequent PCR specific to the mls gene on the plasmid, as well as by retransformation of Escherichia coli. Optimization carried out with strain DSM 1313 increased transformation efficiencies from <1 to (2.2 ± 0.5) × 10⁵ transformants per μg of plasmid DNA. Factors conducive to achieving high transformation efficiencies included optimized periods of incubation both before and after electric pulse application, chilling during cell collection and washing, subculture in the presence of isoniacin prior to electric pulse application, a custom-built cuvette embedded in an ice block during pulse application, use of a high (25-kV/cm) field strength, and induction of the mls gene before plating the cells on selective medium. The protocol and preferred conditions developed for strain DSM 1313 resulted in transformation efficiencies of (5.0 ± 1.8) × 10⁴ transformants per μg of plasmid DNA for strain ATCC 27405 and ~1 × 10³ transformants per μg of plasmid DNA for strains DSM 4150 and 7072. Cell viability under optimal conditions was ~50% of that of controls not exposed to an electrical pulse. Dam methylation had a beneficial but modest (7-fold for strain ATCC 27405; 40-fold for strain DSM 1313) effect on transformation efficiency. The effect of isoniacin was also strain specific. The results reported here provide for the first time a gene transfer method functional in C. thermocellum that is suitable for molecular manipulations involving either the introduction of genes associated with foreign gene products or knockout of native genes.     

Electrotransformation of Clostridium thermocellum

Electrotransformation of several strains of Clostridium thermocellum was achieved using plasmid pIKm1 with selection based on resistance to erythromycin and lincomycin. A custom-built pulse generator was used to apply a square 10-ms pulse to an electrotransformation cuvette consisting of a modified centrifuge tube. Transformation was verified by recovery of the shuttle plasmid pIKm1 from presumptive transformants of C. thermocellum with subsequent PCR specific to the mls gene on the plasmid, as well as by retransformation of Escherichia coli. Optimization carried out with strain DSM 1313 increased transformation efficiencies from <1 to (2.2 +/- 0.5) x 10(5) transformants per micro g of plasmid DNA. Factors conducive to achieving high transformation efficiencies included optimized periods of incubation both before and after electric pulse application, chilling during cell collection and washing, subculture in the presence of isoniacin prior to electric pulse application, a custom-built cuvette embedded in an ice block during pulse application, use of a high (25-kV/cm) field strength, and induction of the mls gene before plating the cells on selective medium. The protocol and preferred conditions developed for strain DSM 1313 resulted in transformation efficiencies of (5.0 +/- 1.8) x 10(4) transformants per micro g of plasmid DNA for strain ATCC 27405 and approximately 1 x 10(3) transformants per micro g of plasmid DNA for strains DSM 4150 and 7072. Cell viability under optimal conditions was approximately 50% of that of controls not exposed to an electrical pulse. Dam methylation had a beneficial but modest (7-fold for strain ATCC 27405; 40-fold for strain DSM 1313) effect on transformation efficiency. The effect of isoniacin was also strain specific. The results reported here provide for the first time a gene transfer method functional in C. thermocellum that is suitable for molecular manipulations involving either the introduction of genes associated with foreign gene products or knockout of native genes.     

Restriction endonuclease activity in Clostridium thermocellum and Clostridium thermosaccharolyticum

 Clostridium thermocellum cell extracts exhibit specific endonuclease activity with very little non-specific exonuclease activity at 55°C. The Dam methylation system of Escherichia coli offers complete protection from digestion by C. thermocellum ATCC 27405 cell extracts for all DNA tested (totaling >100 kb, insuring that most potential restriction sequences have been exposed). Based on both the Dam recognition sequence and the similarity of cell extract and MboI DNA digests, the C. thermocellum restriction enzyme recognition sequence appears to be 5′ GATC 3′. Cell extracts made from a second thermophile, C. thermosaccharolyticum ATCC 31960 do not exhibit specific endonuclease activity under the conditions tested. Genomic DNA from C. thermocellum exhibits a Dam⁺ phenotype while genomic DNA from C. thermosaccharolyticum exhibits a Dam^- phenotype. Received: 10 March 1995/Received revision: 4 September 1995/Accepted: 13 September 1995     

Towards designer cellulosomes in Clostridia: mannanase enrichment of the cellulosomes produced by Clostridium cellulolyticum

The man5K gene of Clostridium cellulolyticum was cloned and overexpressed in Escherichia coli. This gene encodes a 424-amino-acid preprotein composed of an N-terminal leader peptide, followed by a dockerin module and a C-terminal catalytic module belonging to family 5 of the glycosyl hydrolases. Mature Man5K displays 62% identity with ManA from Clostridium cellulovorans. Two forms of the protein were purified from E. coli; one form corresponds to the full-length enzyme (45 kDa), and a truncated form (39 kDa) lacks the N-terminal dockerin module. Both forms exhibit the same typical family 5 mannanase substrate preference; they are very active with the galactomannan locust bean gum, and the more galacto-substituted guar gum molecules are degraded less. The truncated form, however, displays fourfold-higher activity with galactomannans than the full-length enzyme. Man5K was successfully overproduced in C. cellulolyticum by using expression vectors. The trans-produced protein was found to be incorporated into the cellulosomes and became one of the major enzymatic components. Modified cellulosomes displayed 20-fold-higher specific activities than control fractions on galactomannan substrates, whereas the specific activity on crystalline cellulose was reduced by 20%. This work clearly showed that the composition of the cellulosomes is obviously regulated by the relative amounts of the enzymes produced and that this composition can be engineered in clostridia by structural gene cloning.     

Isolation of Clostridium thermocellum Auxotrophs

Spontaneous and UV irradiation-induced auxotrophic mutants of Clostridium thermocellum, an anaerobic cellulolytic thermophile, were isolated after penicillin enrichment in a chemically defined medium.     

梭热杆菌纤维小体研究进展

梭热杆菌(Clostridium thermocellum)是一种嗜热厌氧细菌,通过分泌大量纤维素酶高效降解纤维素.根据作用纤维素的不同部位,梭热杆菌分泌的纤维素酶分为内切纤维素酶和外切纤维素酶.纤维小体是由支架蛋白、锚定元件、黏合蛋白、纤维素结合域和催化单位组成的复合体,其独特的结构,使得它可以比真菌纤维素酶更紧密地结合到纤维素表面,这个复合结构结合着多种催化单位,而此特殊的结构是梭热杆菌高效降解纤维素的必要条件.近年来,为更深入透彻地了解纤维小体的结构与功能进行了大量的研究工作,现对相关研究进展进行综述,并给出了未来可能的发展方向.     

Form and Function of Clostridium thermocellum Biofilms

The importance of bacterial adherence has been acknowledged in microbial lignocellulose conversion studies; however, few reports have described the function and structure of biofilms supported by cellulosic substrates. We investigated the organization, dynamic formation, and carbon flow associated with biofilms of the obligately anaerobic cellulolytic bacterium Clostridium thermocellum 27405. Using noninvasive, in situ fluorescence imaging, we showed biofilms capable of near complete substrate conversion with a characteristic monolayered cell structure without an extracellular polymeric matrix typically seen in biofilms. Cell division at the interface and terminal endospores appeared throughout all stages of biofilm growth. Using continuous-flow reactors with a rate of dilution (2 h⁻¹) 12-fold higher than the bacterium''s maximum growth rate, we compared biofilm activity under low (44 g/liter) and high (202 g/liter) initial cellulose loading. The average hydrolysis rate was over 3-fold higher in the latter case, while the proportions of oligomeric cellulose hydrolysis products lost from the biofilm were 13.7% and 29.1% of the total substrate carbon hydrolyzed, respectively. Fermentative catabolism was comparable between the two cellulose loadings, with ca. 4% of metabolized sugar carbon being utilized for cell production, while 75.4% and 66.7% of the two cellulose loadings, respectively, were converted to primary carbon metabolites (ethanol, acetic acid, lactic acid, carbon dioxide). However, there was a notable difference in the ethanol-to-acetic acid ratio (g/g), measured to be 0.91 for the low cellulose loading and 0.41 for the high cellulose loading. The results suggest that substrate availability for cell attachment rather than biofilm colonization rates govern the efficiency of cellulose conversion.     

Cellulolytic and physiological properties of Clostridium thermocellum

Three strains of Clostridium thermocellum obtained from various sources were found to have nearly identical deoxyribonucleic acid guanosine plus cytosine contents that ranged from 38.1–39.5 mole-%. All strain examined fermented only cellulose and cellulose derivatives, but not glucose, or xylose or other sugars. The principal cellulose fermentation products were ethanol, lactate, acetate, hydrogen and carbon dioxide. Growth of C. thermocellum on cellulose resulted in the production of extracellular cellulase that was non-oxygen labile, was thermally stable at 70° C for 45 min and adsorbed strongly on cellulose. Production of cellulase during fermentation correlated linearly with growth and cellulose degradation. Both the yield and specific activity of crude cellulase varied considerably with the specific growth substrates. Highest cellulase yield was obtained when grown on native cellulose, -cellulose and low degree of polymerization cellulose but not carboxymethylcellulose or other carbohydrate sources. Cellulase activity was not detected when cells were grown on cellobiose. Crude extracellular protein preparations lacked proteolytic and cellobiase activity. The pH and temperafure optima for endoglucanase activity were 5.2 and 65° C, respectively, while that of the exoglucanase activity were 5.4 and 64° C, respectively. The specific activity at 60° c for exoglucanase and endoglucanase of crude cellulase obtained from cells grown on cellulose (MN 300) was 3.6 moles reducing sugar equivalents released per h (unit)/mg of protein and 1.5 mole reducing sugar equivalent released per min (unit)/mg of protein, respectively. The yield of endoglucanase was 125 units per g of cellulose MN 300 degraded and that of exoglucanase was 300 units per g of cellulose MN 300 degraded. Glucose and cellobiose were the hydrolytic end products of crude cellulase action on cellulose, cellotraose and cellotriose in vitro.     

Characterization of Clostridium thermocellum JW20

Clostridium thermocellum JW20 (ATCC 31549), which was isolated from a Louisiana cotton bale, grew on cellulose, cellobiose, and xylooligomers and, after adaptation, on glucose, fructose, and xylose in the pH range of 7.5 to 6.1 with T_opt of 60°C, T_max of 69°C, and T_min of above 28°C. Doubling times during growth on cellulose and cellobiose were 6.5 and 2.5 h, respectively. The G+C content of the DNA was 40 mol% (chemical analysis). Growth on cellulose as substrate was totally inhibited in the presence of more than 125 mM sodium sulfate, 300 mM sodium chloride, 250 mM potassium chloride, 200 mM calcium chloride, 125 mM magnesium chloride, 40 mM lactate, or 250 mM acetate. The ratio of the fermentation products ethanol to acetate plus H₂ decreased when the culture was agitated. Agitation otherwise increased the rate of cellulose degradation in a growing culture but not under nongrowth conditions or with cell-free culture supernatant containing the extracellular cellulase. Shaking lowered the concentration of H₂ in the culture broth and thus minimized inhibition by the H₂ formed. Externally added H₂ caused an increased formation of ethanol during growth on cellulose or cellobiose. However, at an atmospheric pressure as high as 355 kPa (50 lb/in²), H₂ did not cause significant growth inhibition beyond an increasing lag phase (up to 24 h). Several criteria to specifically prove the purity of C. thermocellum cultures were suggested.     

Cellodextrin and laminaribiose ABC transporters in Clostridium thermocellum

Clostridium thermocellum is an anaerobic thermophilic bacterium that grows efficiently on cellulosic biomass. This bacterium produces and secretes a highly active multienzyme complex, the cellulosome, that mediates the cell attachment to and hydrolysis of the crystalline cellulosic substrate. C. thermocellum can efficiently utilize only β-1,3 and β-1,4 glucans and prefers long cellodextrins. Since the bacterium can also produce ethanol, it is considered an attractive candidate for a consolidated fermentation process in which cellulose hydrolysis and ethanol fermentation occur in a single process. In this study, we have identified and characterized five sugar ABC transporter systems in C. thermocellum. The putative transporters were identified by sequence homology of the putative solute-binding lipoprotein to known sugar-binding proteins. Each of these systems is transcribed from a gene cluster, which includes an extracellular solute-binding protein, one or two integral membrane proteins, and, in most cases, an ATP-binding protein. The genes of the five solute-binding proteins were cloned, fused to His tags, overexpressed, and purified, and their abilities to interact with different sugars was examined by isothermal titration calorimetry. Three of the sugar-binding lipoproteins (CbpB to -D) interacted with different lengths of cellodextrins (G₂ to G₅), with disassociation constants in the micromolar range. One protein, CbpA, binds only cellotriose (G₃), while another protein, Lbp (laminaribiose-binding protein) interacts with laminaribiose. The sugar specificity of the different binding lipoproteins is consistent with the observed substrate preference of C. thermocellum, in which cellodextrins (G₃ to G₅) are assimilated faster than cellobiose.     

Growth inhibition of Clostridium thermocellum by carboxylic acids: A mechanism based on uncoupling by weak acids

Summary The inhibition of Clostridium thermocellum strains by acetate and other organic acids (propionate, butyrate) can be explained by a model based on the chemiosmotic theory and uncoupler action. It is proposed that the charged permeant species in the process of anion exclusion is the dimer HA _- ² . Evidence for this mechanisms is provided by ³¹P-NMR studies of whole cells and cell extracts.Abbreviations CM4-Cb CM4-cellobiose - EPC⁵⁰ equipotency concentration - P _m bilayer partition coefficient - ka acid dissociation constant     

Adherence of Clostridium thermocellum to cellulose

The adherence of Clostridium thermocellum, a cellulolytic, thermophilic anaerobe, to its insoluble substrate (cellulose) was studied. The adherence phenomenon was determined to be selective for cellulose. The observed adherence was not significantly affected by various parameters, including salts, pH, temperature, detergents, or soluble sugars. A spontaneous adherence-defective mutant strain (AD2) was isolated from the wild-type strain YS. Antibodies were prepared against the bacterial cell surface and rendered specific to the cellulose-binding factor (CBF) by adsorption to mutant AD2 cells. By using these CBF-specific antibodies, crossed immunoelectrophoresis of cell extracts revealed a single discrete precipitation peak in the parent strain which was absent in the mutant. This difference was accompanied by an alteration in the polypeptide profile whereby sonicates of strain YS contained a 210,000-molecular-weight band which was missing in strain AD2. The CBF antigen could be removed from cell extracts by adsorption to cellulose. A combined gel-overlay--immunoelectrophoretic technique demonstrated that the cellulose-binding properties of the CBF were accompanied by carboxymethylcellulase activity. During the exponential phase of growth, a large part of the CBF antigen and related carboxymethylcellulase activity was associated with the cells of wild-type strain YS. However, the amounts decreased in stationary-phase cells. Cellobiose-grown mutant AD2 cells lacked the cell-associated CBF, but the latter was detected in the extracellular fluid. Increased levels of CBF were observed when cells were grown on cellulose. In addition, mutant AD2 regained cell-associated CBF together with the property of cellulose adherence. The presence of the CBF antigen and related adherence characteristics appeared to be a phenomenon common to other naturally occurring strains of this species.     

Cellulose promotes extracellular assembly of Clostridium cellulovorans cellulosomes.

Cellulosome synthesis by Clostridium cellulovorans was investigated by growing the cells in media containing different carbon sources. Supernatant from cells grown with cellobiose contained no cellulosomes and only the free forms of cellulosomal major subunits CbpA, P100, and P70 and the minor subunits with enzymatic activity. Supernatant from cells grown on pebble-milled cellulose and Avicel contained cellulosomes capable of degrading crystalline cellulose. Supernatants from cells grown with cellobiose, pebble-milled cellulose, and Avicel contained about the same amount of carboxymethyl cellulase activity. Although the supernatant from the medium containing cellobiose did not initially contain active cellulosomes, the addition of crystalline cellulose to the cell-free supernatant fraction converted the free major forms to cellulosomes with the ability to degrade crystalline cellulose. The binding of P100 and P70 to crystalline cellulose was dependent on their attachment to the endoglucanase-binding domains of CbpA. These data strongly indicate that crystalline cellulose promotes cellulosome assembly.     

Susceptibility of Clostridium perfringens to C-C fatty acids

AIMS: To determine susceptibility of Clostridium perfringens strains CCM 4435(T) and CNCTC 5459 to C(2)-C(18) fatty acids, and evaluate influence of pH in cultures grown on glucose. Straw particles were added to cultures to simulate the presence of solid phase of the digestive tract milieu. METHODS AND RESULTS: Antimicrobial activity of fatty acids was expressed as a concentration at which only 50% of the initial glucose was utilized. Lauric acid showed the highest antimicrobial activity, followed by myristic, capric, oleic and caprylic acid. Only strain CNCTC 5459 was susceptible to linoleic acid. Neither caproic acid and acids with a shorter carbon chain nor palmitic and stearic acid influenced substrate utilization. The antimicrobial activity of myristic, oleic and linoleic acid decreased when clostridia were grown in the presence of straw particles. In cultures of both strains treated with capric and lauric acid at pH 5.0-5.3, the number of viable cells was <10(2) ml(-1). Only lauric acid reduced number of viable cells of both strains below 10(2) ml(-1) at pH > 6. Transmission electron microscopy revealed separation of inner and outer membranes and cytoplasma disorganization in cells treated with lauric acid. CONCLUSIONS: Lauric acid had the highest activity towards C. perfringens among fatty acid tested. Its activity was not influenced by the presence of solid particles and did not cease at pH > 6. SIGNIFICANCE AND IMPACT OF THE STUDY: Lauric acid might be a means for control of clostridial infections in farm animals.     

Lipids of higher fungi. III. The fatty acids and 2-hydroxy fatty acids in some species of Basidiomycetes

Total fatty acids derived from 12 species of mushrooms were separated into fatty acid and 2-hydroxy fatty acid fractions (FA and HFA), and analyzed quantitatively. The HFA content varied from 0 to 22% of total fatty acids. The major fatty acids were 16:0, 18:0, 18:1, 18:2, and the major 2-hydroxy fatty acids were h16:0, h18:0, h22:0, h24:0. The predominant HFA in the mushrooms investigated had chain-lengths greater than 20 C-atoms, and were derived from sphingolipids — ceramides and cerebrosides.