Factors affecting the characteristics of melamine resin microcapsules containing fragrant oils

Microcapsules containing fragrant oils as a core material were prepared byin situ polymerization, using melamine-formaldehyde prepolymer as the wall material. The several parameters, such as stirring times, stirring rates, emulsifier types, emulsifier concentrations, and the viscosity of the core materials, affect the characteristics of the microcapsules. These parameters were investigated by the analyses of microcapsule size, particle size distribution, and morphology. The average microcapsule size decreased with an increase in stirring time, stirring rate, emulsifier concentration, and viscosity of the core material. It was also found that poly(vinyl alcohol) as a protective colloid could enhance the stability of the melamine-formaldehyde microcapsules.     

Effect of different dextrose equivalents of maltodextrin on oxidation stability in encapsulated fish oil by spray drying

Encapsulating fish oil by spray drying with an adequate wall material was investigated to determine if stable powders containing emulsified fish-oil-droplets can be formed. In particular, the dextrose equivalent (DE) of maltodextrin (MD) affects the powder structure, surface-oil ratio, and oxidative stability of fish oil. The carrier solution was prepared using MD with different DEs (DE = 11, 19, and 25) and sodium caseinate as the wall material and the emulsifier, respectively. The percentage of microcapsules having a vacuole was 73, 39, and 38% for MD with DE = 11, 19, and 25, respectively. Peroxide values (PVs) were measured for the microcapsules incubated at 60 °C. The microcapsules prepared with MD of DE = 25 and 19 had lower PVs than those prepared with MD of DE = 11. The difference in PV can be ascribed to the difference in the surface-oil ratio of the spray-dried microcapsules.     

Development of a novel immobilization method for enzymes from hyperthermophiles

Peptide tags containing tyrosines (Y-tag) were introduced at the C-terminus of a hyperthermophilic enzyme, alkaline phosphatase from Pyrococcus furiosus (PfuAP). Immobilization of the recombinant PfuAPs onto water-in-oil-in-water (W/O/W) type microcapsules was performed by an in situ polymerization method. All the recombinant PfuAPs prepared in this study were quantitatively immobilized onto microcapsules. The PfuAP-immobilized microcapsules showed no significant loss of enzymatic activity until the 5th round of assays. This result implies that the recombinant PfuAPs were covalently immobilized onto microcapsules. Immobilized PfuAP tagged with a Y-tag having the sequence GGYYY exhibited approximately a twofold higher catalytic activity compared with the wild-type PfuAP. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

灵芝孢子油微胶囊制备技术

灵芝孢子油是从灵芝孢子粉中提取的具有一定药理活性的脂质成分。为提高灵芝孢子油稳定性,以大豆分离蛋白和麦芽糊精为壁材,采用喷雾干燥法和冷冻干燥法制备灵芝孢子油微胶囊。通过试验优化了制备工艺条件并比较了两者干燥方式制备微胶囊的理化性质。结果表明：最佳工艺为大豆分离蛋白和麦芽糊精质量比1:1、固形物含量20%、均质压力30MPa、壁材芯材质量比4:1。两种干燥方式微胶囊流动性、溶解性均较好,差异不显著。但两种微胶囊形态差异较大,喷雾干燥微胶囊整体呈球状、表面紧密无裂缝有凹陷,包埋率为90.84%;冷冻干燥微胶囊结构疏松呈片状,表面多孔。因此喷雾干燥法更适合包埋灵芝孢子油。     

Design and Development of Gliclazide Mucoadhesive Microcapsules: In Vitro and In Vivo Evaluation

In this study an attempt was made to prepare mucoadhesive microcapsules of gliclazide using various mucoadhesive polymers designed for oral controlled release. Gliclazide microcapsules were prepared using sodium alginate and mucoadhesive polymer such as sodium carboxymethyl cellulose (sodium CMC), carbopol 934P or hydroxy propylmethyl cellulose (HPMC) by orifice-ionic gelation method. The microcapsules were evaluated for surface morphology and particle shape by scanning electron microscope. Microcapsules were also evaluated for their microencapsulation efficiency, in vitro wash-off mucoadhesion test, in vitro drug release and in vivo study. The microcapsules were discrete, spherical and free flowing. The microencapsulation efficiency was in the range of 65–80% and microcapsules exhibited good mucoadhesive property in the in vitro wash off test. The percentage of microcapsules adhering to tissue at pH 7.4 after 6 h varied from 12–32%, whereas the percentage of microcapsules adhering to tissue at pH 1.2 after 6 h varied from 35–68%. The drug release was also found to be slow and extended for more than 16 h. In vivo testing of the mucoadhesive microcapsules in diabetic albino rats demonstrated significant antidiabetic effect of gliclazide. The hypoglycemic effect obtained by mucoadhesive microcapsules was for more than 16 h whereas gliclazide produced an antidiabetic effect for only 10 h suggesting that mucoadhesive microcapsules are a valuable system for the long term delivery of gliclazide.     

响应面法优化火麻仁油微胶囊喷雾干燥工艺的研究

为了制备包埋率高、稳定性好的火麻仁油微胶囊,拓展其在食品领域的应用范围,以火麻仁油为芯材、单双脂肪酸甘油酯为乳化剂、酪蛋白酸钠为壁材、固体玉米糖浆为填充剂、柠檬酸钠为缓冲盐、抗坏血酸棕榈酸钠为抗氧化剂,通过喷雾干燥法制备60%载油率的火麻仁油微胶囊,以微胶囊包埋率为响应值,在单因素实验的基础上,以干物浓度、进风温度、出风温度为实验因素,采用Box-Behnken响应面分析法进行优化。随后通过扫描电镜观察火麻仁油微胶囊表面形态结构,以确定包埋效果。并利用油脂氧化分析仪检测火麻仁油微胶囊的氧化稳定性。研究确定微胶囊的最佳工艺条件为：干物浓度42%、进风温度168 ℃、出风温度74 ℃,在此条件下制备得到的火麻仁油微胶囊包埋率可达92.15%。通过扫描电镜观察到火麻仁油微胶囊表面圆滑无裂痕,表明火麻仁油微胶囊包埋效果比较理想。经油脂氧化分析仪测定,与对照组（火麻仁油）相比,试验组（火麻仁油微胶囊）的氧化诱导期时间较长,能够达到30 h以上,说明通过对火麻仁油进行微胶囊包埋可以较大程度地提高油脂的稳定性。研究结果为火麻仁油在食品工业领域的开发和应用提供了理论支持。     

Essential oil formulations useful as a new tool for insect pest control

This study investigated the effects of some essential oils onLimantria dispar (Lepidoptera: Lymantridae, gypsy moth) larvae, one of the most serious pests of cork oak forests. The essential oils were first formulated as oil in water (o/w) emulsions and used in laboratory bioassays to assess their lethal concentration (LC50). Microcapsules containing the most promising, oils (Rosmarinus officinalis andThymus herba-barona) were then prepared by a phase separation process, followed by freeze-drying. The formulations thus obtained, characterized in terms of essential oil content and composition, morphology, storage stability, and release profile, were tested on gypsy moth larvae. The results showed that the tested oils possess interesting larvicidal effects that make them suitable for application in integrated control strategies. The microencapsulation process gave high encapsulation yields (over 98%) with both essential oils, which have different chemical compositions. The microcapsules had toxic effects at a concentration similar to that usually employed for localized treatments with microgranular synthetic pesticides. Toxicity appeared to be maximized when the microparticles adhered to the typical hair structures of several defoliator families. These formulations seem to be able to protect the core material against environmental agents and could be considered for use in controlled drug release systems. The natural active principles they contain could provide an alternative system in insect pest control.     

Measurement of particle diameter of <Emphasis Type="Italic">Lactobacillus acidophilus</Emphasis> microcapsule by spray drying and analysis on its microstructure

Lactobacillus acidophilus, as a probiotic, is widely used in many functional food products. Microencapsulation not only increases the survival rate of L. acidophilus during storage and extends the shelf-life of its products, but also optimal size microcapsule makes L. acidophilus have an excellent dispersability in final products. In this paper, L. acidophilus was microencapsulated using spray drying (inlet air temperature of 170°C; outlet air temperature of 85–90°C). The wall materials used in this study were β-cyclodextrin and acacia gum in the proportion of 9:1 (w/w), and microcapsules were prepared at four levels of wall materials (15, 20, 25 and 30% [w/v]) with a core material concentration of 6% (v/v). The microcapsule diameters were measured by Malvern’s Mastersizer-2000 particle size analyzer. The results showed that the particle diameters of microcapsule were mostly within 6.607 μm and 60.256 μm and varied with 2.884–120.226 μm (the standard smaller microcapsule designated as <350 μm). Through comparison of microcapsule size and uniformity with different concentration of wall materials, we concluded that the optimal concentration of wall material was 20% (w/v), which gave microcapsule with a relatively uniform size (averaging 22.153 μm), and the number of surviving encapsulated L. acidophilus was 1.50 × 10⁹ c.f.u./ml. After 8 weeks storage at 4°C, the live bacterial number was above 10⁷ c.f.u./ml, compared with unencapsulated L. acidophilus, 10⁴–10⁵ c.f.u./ml. Through the observation of scanning electron microscopy, we found that the shapes of microcapsule were round and oval, and L. acidophilus cells located in the centre of microcapsule.     

Biodegradable microcapsules with entrapped DNA for development of new DNA vaccines

In this study an universal method for preparation of biodegradable microcapsules for antigen entrapment was proposed and optimized. The multilayer microcapsules were prepared by layer-by-layer adsorption of various polyelectrolytes (such as alginate, poly-L-lysine, κ-carrageenan, chitosan and dextran derivatives). High entrapment efficiency of protein and plasmid DNA (non less than 90%) was shown. To carry out in vivo tests, a set of microcapsules with entrapped pTKShi plasmid encoding the E2 polypeptide of classical swine fever was prepared. It was shown that an injection of these microcapsules into mice induced an immune response. The highest antibody titers of mouse blood sera were got after immunization by microcapsules based on modified dextran/carrageenan and modified chitosan/carrageenan. The proposed method for antigen entrapment in biodegradable microcapsules could be used for development of encapsulated vaccines of a new generation (DNA-vaccines).     

Preparation of a Water-in-oil-in-water (W/O/W) Type Microcapsules by a Single-droplet-drying Method and Change in Encapsulation Efficiency of a Hydrophilic Substance during Storage

Microcapsules of a water-in-oil-in-water (W/O/W) emulsion, which contained a hydrophilic substance, 1,3,6,8-pyrenetetrasulfonic acid tetrasodium salt (PTSA), in its inner aqueous phase, was prepared by hot-air-drying or freeze-drying the emulsion using a single-droplet-drying method. Pullulan, maltodextrin, or gum arabic was used as a wall material, and the oily phase was tricaprylin, oleic acid, olive oil, or a mixture of tricaprylin and olive oil. An encapsulation efficiency higher than 0.95 was reached except for the microcapsules prepared using gum arabic and oleic acid. The hot-air-dried microcapsules were generally more stable than the freeze-dried microcapsules at 37°C and various relative humidities. The stability was higher for the microcapsules with tricaprylin as the oily phase than for the microcapsules with oleic acid. The higher stability of the microcapsules with tricaprylin would be ascribed to the lower partition coefficient of PTSA to the oily phase. There was a tendency for the stability to be higher at lower relative humidity for both the hot-air- and freeze-dried microcapsules. The volumetric fraction of olive oil in its mixture with tricaprylin did not significantly affect either the encapsulation efficiency or the stability of the hot-air-dried microcapsules.     

海藻酸钠漂浮微囊的制备以及载药应用研究

目的:本文研究了一种海藻酸钠漂浮微囊的制备方法用以实现胃部持续给药。方法:采用微胶囊发生器制备海藻酸钠漂浮微囊,壁材为海藻酸钠,芯材为食用油的漂浮微囊,衡量不同的制备参数对微囊的理化特性影响;采用克拉霉素作为模型脂溶性药物,测量漂浮药物递送系统的控制释放性质、以及微囊载药特性和小鼠体内漂浮验证。结果:成功制备出了具有漂浮特性的海藻酸钠微囊,其中泵送速度对微囊性质的影响最大。制备出的微囊具有低细胞毒性,可以实现90%的药物包埋率。此外,微囊可以在小鼠的胃中保存超过6小时,具有良好的漂浮特性。结论:海藻酸钠漂浮微囊是一种有效的胃部药物递送系统,可明显延长药物在胃部的滞留时间。     

Enzyme immobilized reactor design for ammonia removal from waste water

Removal of nitrogen compound from waste, water is essential and often accomplished by biological process. To prevent washout and to develop an efficient bioreactor, immobilization of suitable microorganisms could be sensible approach. Strains and permeabilized cells encapsulated in cellulose nitrate microcapsules and immobilized on polystyrene, films were prepared by the method described in the previous study. In the wastewater, treatment system, nitrification of ammonia component is generally known as rate controlling step. To enhance the rate of nitrification, firstly nitrifying strainsNitrosomonas europaea (IFO 14298), are permeabilized chemically, and immobilized on polystyrene, films and secondly oxidation rates of strain system and permeabilized strain system are compared in the same condition. With 30 minute permeabilized cells, it took about 25 hours to oxidize 70% of ammonia in the solution, while it took about 40 hours to treat same amount of ammonia with untreated cells. All the immobilization procedures did not harm to the enzyme activity and no mass transfer resistance through the capsule wall was shown. In the durability test of immobilized system, the system showed considerable activity for the repeated operation for 90 days. With these results, the system developed in this study showed the possibility to be used in the actual waste water treatment system.     

Ethyl Cellulose Microcapsules for Protecting and Controlled Release of Folic Acid

Ethyl cellulose microcapsules were developed for use as a drug-delivery device for protecting folic acid from release and degradation in the undesirable environmental conditions of the stomach, whilst allowing its release in the intestinal tract to make it available for absorption. The controlled release folic acid-loaded ethyl cellulose microcapsules were prepared by oil-in-oil emulsion solvent evaporation using a mixed solvent system, consisting of a 9:1 (v/v) ratio of acetone:methanol and light liquid paraffin as the dispersed and continuous phase. Span 80 was used as the surfactant to stabilize the emulsion. Scanning electron microscopy revealed that the microcapsules had a spherical shape. However, the particulate properties and in vitro release profile depended on the concentrations of the ethyl cellulose, Span 80 emulsifier, sucrose (pore inducer), and folic acid. The average diameter of the microcapsules increased from 300 to 448 μm, whilst the folic acid release rate decreased from 52% to 40%, as the ethyl cellulose concentration was increased from 2.5% to 7.5% (w/v). Increasing the Span 80 concentration from 1% to 4% (v/v) decreased the average diameter of microcapsules from 300 to 141 μm and increased the folic acid release rate from 52% to 79%. The addition of 2.5–7.5% (w/v) of sucrose improved the folic acid release from the microcapsules. The entrapment efficiency was improved from 64% to 88% when the initial folic acid concentration was increased from 1 to 3 mg/ml.     

Preparation of a water-in-oil-in-water (W/O/W) type microcapsules by a single-droplet-drying method and change in encapsulation efficiency of a hydrophilic substance during storage

Microcapsules of a water-in-oil-in-water (W/O/W) emulsion, which contained a hydrophilic substance, 1,3,6,8-pyrenetetrasulfonic acid tetrasodium salt (PTSA), in its inner aqueous phase, was prepared by hot-air-drying or freeze-drying the emulsion using a single-droplet-drying method. Pullulan, maltodextrin, or gum arabic was used as a wall material, and the oily phase was tricaprylin, oleic acid, olive oil, or a mixture of tricaprylin and olive oil. An encapsulation efficiency higher than 0.95 was reached except for the microcapsules prepared using gum arabic and oleic acid. The hot-air-dried microcapsules were generally more stable than the freeze-dried microcapsules at 37 degrees C and various relative humidities. The stability was higher for the microcapsules with tricaprylin as the oily phase than for the microcapsules with oleic acid. The higher stability of the microcapsules with tricaprylin would be ascribed to the lower partition coefficient of PTSA to the oily phase. There was a tendency for the stability to be higher at lower relative humidity for both the hot-air- and freeze-dried microcapsules. The volumetric fraction of olive oil in its mixture with tricaprylin did not significantly affect either the encapsulation efficiency or the stability of the hot-air-dried microcapsules.     

Irradiation depolymerized guar gum as partial replacement of gum Arabic for microencapsulation of mint oil

Spray dried microcapsules of mint oil were prepared using gum Arabic alone and its blends with radiation or enzymatically depolymerized guar gum as wall materials. Microcapsules were evaluated for retention of mint oil during 8-week storage during which qualitative changes in encapsulated mint oil was monitored using principal component analysis. The microcapsules with radiation depolymerized guar gum as wall material component could better retain major mint oil compounds such as menthol and isomenthol. The t(1/2) calculated for mint oil in microcapsules of gum Arabic, gum Arabic:radiation depolymerized guar gum (90:10), gum Arabic:enzyme depolymerized guar gum (90:10) was 25.66, 38.50, and 17.11 weeks, respectively. The results suggested a combination of radiation depolymerized guar gum and gum Arabic to show better retention of encapsulated flavour than gum Arabic alone as wall material.     

Enzymatic synthesis of 2-keto- -gluconate and 2-keto- -galactonate from -glucose and -galactose with cell culture of Pseudomonas fluorescens and 2-keto-galactonate from -galactono 1,4-lactone with partially purified 2-ketogalactonate reductase

2-Keto- -gluconate and 2-keto- -galactonate were prepared from -glucose (with a yield of 40%) and -galactose (with a yield of 25%), respectively, with cell culture of Pseudomonas fluorescens. However, 2-keto- -mannoate was not prepared in this method. The time courses of the reactions showed that 2-keto- -gluconic acid and 2-keto- -galactonic acid were produced from -glucose and -galactose through -gluconate and -galactonate, respectively. When using -galactono 1,4-lactone as a starting material, 2-keto- -galactonate was produced with partially purified NADP-dependent 2-ketogalactonate reductase from P. fluorescens. Some fundamental properties of the 2-ketogalactonate reductase were compared with those of 2-ketogluconate reductase from Acetobacter and Gluconobacter.     

Preparation and Thermal Energy Storage of Carboxymethyl Cellulose-Modified Nanocapsules

A series of nanocapsules with carboxymethyl cellulose (CMC)-modified melamine-formaldehyde as the shell material and phase change paraffin as the core material were prepared by in situ polymerization. The modified capsules were examined using Fourier transform infrared spectra, scanning electronic microscope, differential scanning calorimeter, and optical microscopy, and two factors that influence paraffin emulsion preparation (emulsifier type and stirring rate) were investigated. The effects of the synthesis conditions used for the prepolymer on the surface morphology of the capsules were also studied. We found that phase change capsules prepared with both anionic and nonionic emulsifiers were superior to those prepared with a simple emulsifier. The best performance of the paraffin emulsion was obtained when the emulsion was stirred at 8,000 rpm during preparation. The optimal prepolymer reaction conditions to give smooth capsules with good dispersibility and complete morphology were reaction temperature 72.5 °C, reaction time 75 min, and pH?8.5. The CMC-modified nanocapsules have a phase change enthalpy of 83.46 J/g, are fully encased, and are uniform, with an average particle size of 50 nm.     

Utilization of seaweed Ulva sp. in Paracas Bay (Peru): experimenting with compost

In Paracas Bay (Peru), large quantities of Ulva sp. interfere with various important activities of the zone. In this context, the present study was undertaken to evaluate the effect of adding Ulva sp. in compost piles and the quality of the resulting composts. Six compost piles were prepared using, straw, green material mixture, cow manure and Ulva in different quantities (9, 17 and 28% of volume) and forms. Several variables were monitored during the process and the chemical characteristics of the final composts were determined. Aerial biomass achieved by maize plants was also evaluated for each compost at different compost/sand proportions. Results show that the compost pile made with Ulva powder registered the highest temperature and the longest thermophilic phase. Piles prepared with 28% washed Ulvapresented anoxic conditions at the beginning and had higher electrical conductivity values. Carbon/Nitrogen ratio diminished appropriately in all piles and there was no negative effect observed on the pH of the piles. Compost prepared with Ulva had lower contents of Total Kjeldahl Nitrogen, and produced maize plants aerial biomass.     

The antibacterial and immunostimulative effect of chitosan-oligosaccharides against infection by <Emphasis Type="Italic">Staphylococcus aureus</Emphasis> isolated from bovine mastitis

Based on our previous study evaluating the in vivo cure efficacy of chitosan on bovine mastitis, a more water-soluble chitosan-oligosaccharide (OCHT) with a high degree of deacetylation and low molecular weight was prepared to obtain high antibiotic efficacy. The growth of Staphylococcus aureus isolated from bovine mastitis was inhibited within 10 min of treatment with OCHT in concentrations ranging from 0.0001 to 0.5%. Additionally, electron microscopic observation indicated that the surface of the OCHT-treated bacteria was expanded, distorted, and lysed compared to that of the control bacteria. In mice, the proportion of monocytes was elevated, and the levels of interleukin-6 and interferon-γ sharply increased l h after the peritoneal inoculation of the OCHT (0.5 to 1 mg per mouse). Mice challenged intraperitoneally with S. aureus (2.5 × 10⁸ colony forming units) after oral treatment with OCHT (0.5 to 2 mg per day) for 7 days showed a higher survival rate (70–100%) than that of the control (10%). We suggest that the OCHT prepared in this study is a potential agent for the prevention and treatment of bovine mastitis based on its strong antibacterial activity against S. aureus as well as the immunostimulative effect it exhibits on murine infection by S. aureus. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Polyelectrolyte microcapsules as the systems for delivery of biologically active substances

Based on the method of the layer-by-layer (LbL) adsorption of oppositely charged polyelectrolytes, sodium alginate (Alg) and poly-L-lysine (PLL), novel biodegradable microcapsules have been prepared for delivery of biological active substances (BAS). Porous spherical CaCO₃ microparticles were used as templates. The template cores were coated with several layers of oppositely charged polyelectrolytes forming shell on the core surface. The core-shell microparticles were converted into hollow microcapsules by means of core dissolution with EDTA. Mild conditions for microcapsules preparation allow to perform incorporation of various biomolecules maintaining their bioactivity. Biocompatibility and biodegradability of the polyelectrolytes give a possibility to use the microcapsules as the target delivery systems. Chymotrypsin entrapped into the microcapsules was used as a model enzyme. The immobilized enzyme retained about 86% of the activity compared to a native chymotrypsin. The resultant microcapsules were stable in acidic medium and could be easily decomposed by trypsin treatment in slightly alkaline medium. Chymotrypsin was shown to be active after its release from the microcapsules decomposed by the trypsin treatment. Thus, the microcapsules prepared by the LbL technique can be used for the development of new type of BAS delivery systems in humans and animals.