Unraveling double stranded alpha-helical coiled coils: an x-ray diffraction study on hard alpha-keratin fibers

Transformations of proteins secondary and tertiary structures are generally studied in globular proteins in solution. In fibrous proteins, such as hard alpha-keratin, that contain long and well-defined double stranded alpha-helical coiled coil domains, such study can be directly done on the native fibrous tissue. In order to assess the structural behavior of the coiled coil domains under an axial mechanical stress, wide angle x-ray scattering and small angle x-ray scattering experiments have been carried out on stretched horse hair fibers at relative humidity around 30%. Our observations of the three major axial spacings as a function of the applied macroscopic strain have shown two rates. Up to 4% macroscopic strain the coiled coils were slightly distorted but retained their overall conformation. Above 4% the proportion of coiled coil domains progressively decreased. The main and new result of our study is the observation of the transition from alpha-helical coiled coils to disordered chains instead of the alpha-helical coiled coil to beta-sheet transition that occurs in wet fibers.     

Prediction of the stability of coiled coils using molecular dynamics simulations

We have performed 40–80 ns-long molecular dynamics (MD) simulations of the GCN4 leucine zipper and synthetic coiled coils using the GROMOS96 (43a2) and OPLS-AA force fields, with the aim of predicting coiled coil stability. Starting with an initial configuration of two peptides placed in an ideal coiled coil configuration, we find that changing the amino acid sequence modestly or decreasing peptide length can lead to a decrease in the final α-helicity of coiled coils, although for peptides as long or longer than 16 residues, the values of helicity do not decrease to the low values seen in the experimental results of Lumb et al. (Biochemistry. 1994, 33, 7361–7367) or of Su et al. (Biochemistry. 1994, 33, 15501–15510), presumably because the simulations are not long enough. We find, however, that helicity correlates positively with the number of close hydrophobic interactions between the two peptides, showing that stable coiled coils in the simulations are tightly packed. The minimum interhelical distances are 0.50–0.66 nm for charged groups, indicating that favorable charge interactions are also important for the stability of the coiled coil.     

Secondary conformations and temperature effect on structural transformation of amyloid beta (1-28), (1-40) and (1-42) peptides

Secondary structure of three amyloid b-peptides [A beta(1-28), A beta(1-40) and A beta(1-42)] in the solid state was respectively determined by Fourier transform infrared (FT-IR) microspectroscopy. Their thermal-dependent structural transformation were also investigated by FT-IR microspectroscopy equipped with a thermal analyzer. The present result demonstrates that the solid-state A beta(1-28), A beta(1-40) and A beta(1-42) peptides showed a significant IR spectral difference in the amide I and II bands. The secondary conformation of A beta(1-28) peptide was the combination of major beta-sheet and minor alpha-helix with little random coil structures, but A beta(1-40) peptide showed the co-existence of major beta-sheet and minor random coil with little alpha-helix structures. A beta(1-42) peptide mainly consisted of the predominant b-sheet structure. Although the intact A beta(1-28), A beta(1-40) or A beta(1-42) peptide exhibits a different secondary structure, a similar beta-conformation may form after thermal treatment. A thermal-dependent transition was found for solid A beta(1-28) and A beta(1-40) peptides near 40 degrees C and 45 degrees C, respectively. There was no transition temperature for solid A beta(1-42) peptide, however, due to only a very little level of alpha-helix and random coil structure containing in the solid A beta(1-42) peptide. The thermal denaturation plays an important role in the structural transformation from alpha-helix/random coil to beta-sheet.     

Solution structures and biological functions of the antimicrobial peptide, arenicin-1, and its linear derivative

Arenicin-1 (AR-1) is a novel antimicrobial peptide that was isolated from coelomocytes of the marine polychaeta lugworm Arenicola marina and shown to contain a single disulfide bond between Cys3 and Cys20, forming an 18-residue ring [Ovchinnikova, T. V. et al., FEBS Lett 2004, 577, 209-214]. To determine the role of this disulfide bond, we synthesized AR-1 (RWCVYAYVRVRGVLVRYRRCW) and its linear derivative, arenicin-1-S (AR-1-S: RWSVYAYVRVRGVLVRYRRSW). Activity assays revealed that AR-1-S is somewhat less active against bacterial cells than AR-1. Both peptides were very hydrophobic, and displayed cytotoxicity against human red blood cells. Analysis of the tertiary structures of AR-1 and AR-1-S by NMR spectroscopy disclosed that AR-1 has two-stranded antiparallel beta-sheet structures with amphipathicity, while AR-1-S displays a random coil structure in DMSO. Our biological data for AR-1 and AR-1-S indicate that the hydrophobic-hydrophilic balance, disulfide bridge, and the amphipathic beta-sheet structure of the peptides play important roles in their biological activities. Elucidation of the structure of AR-1 and its derivative should facilitate the design of novel non-cytotoxic peptide antibiotics with potent antibacterial activities.     

Structure of model peptides based on Nephila clavipes dragline silk spidroin (MaSp1) studied by 13C cross polarization/magic angle spinning NMR

To obtain detailed structural information for spider dragline spidroin (MaSp1), we prepared three versions of the consensus peptide GGLGGQGAGAAAAAAGGAGQGGYGGLGSQGAGR labeled with 13C at six different sites. The 13C CP/MAS NMR spectra were observed after treating the peptides with different reagents known to alter silk protein conformations. The conformation-dependent 13C NMR chemical shifts and peak deconvolution were used to determine the local structure and the fractional compositions of the conformations, respectively. After trifluoroacetic acid (solvent)/diethyl ether (coagulant) treatment, the N-terminal region of poly-Ala (PLA) sequence, Ala8 and Ala10, adopted predominantly the alpha-helix with a substantial amount of beta-sheet. The central region, Ala15, Ala18, and Leu26, and C-terminal region, Ala31, of the peptide were dominated by either 3(1)-helix or alpha-helix. There was no indication of beta-sheet, although peak broadening indicates that the torsion angle distribution is relatively large. After 9 M LiBr/dialysis treatment, three kinds of conformation, beta-sheet, random coil, and 3(1)-helix, appeared, in almost equal amounts of beta-sheet and random coil conformations for Ala8 and Ala10 residues and distorted 3(1)-helix at the central region of the peptide. In contrast, after formic acid/methanol and 8 M urea/acetonitrile treatments, all of the local structure tends to beta-sheet, although small amounts of random coil are also observed. The peak pattern of the Ala Cbeta carbon after 8 M urea/acetonitrile treatment is similar to the corresponding patterns of silk fiber from Bombyx mori and Samia cynthia ricini. We also synthesized a longer 13C-labeled peptide containing two PLA blocks and three Gly-rich blocks. After 8 M urea/acetonitrile treatment, the conformation pattern was closely similar to that of the shorter peptide.     

Aqueous gel formation of a synthetic peptide derived from the beta-sheet domain of platelet factor-4

We observed gelation of a 23-residue peptide derived from the beta-sheet domain of platelet factor-4 (PF4(24)(-)(46)). The gels were primarily heterogeneous mixtures of 50-200 microm spherical aggregates in a less-dense gel matrix. Infrared and circular dichroism spectroscopies showed gelation involving the conversion of PF4(24)(-)(46) from random coil to beta-sheet. We used aggregation-induced NMR resonance broadening to show that temperature, pH, and ionic strength influenced PF4(24)(-)(46) gelation rates. Under identical solution conditions, gel formation took days at T /= 50 degrees C. Gelation was most rapid at pH values near the pK(a) of the central His35 residue. Increases in solution ionic strength reduced the critical gelation concentration of PF4(24)(-)(46). Our results suggest that PF4(24)(-)(46) gels by a process combining aspects of both heat-set and beta-fibril gelation mechanisms.     

Designed coiled-coil proteins: synthesis and spectroscopy of two 78-residue alpha-helical dimers.

Receptor-adhesive modular proteins are nongenetic proteins designed to contain ligand, spacer, coil, and linker modules and to interact strongly with integrins or other types of cell-surface receptors. We have designed, chemically synthesized, and characterized a 39-residue peptide chain having a 6-residue ligand module (Gly-Arg-Gly-Asp-Ser-Pro-) for adherence to Arg-Gly-Asp-binding integrin receptors, a 3-residue spacer module (-Gly-Tyr-Gly-) for flexibility, and a 30-residue coil module [-(Arg-Ile-Glu-Ala-Ile-Glu-Ala) 4-Arg-Cys-NH2] containing four 7-residue repeats for dimerization. This chain was designed to form a 78-residue noncovalent dimer (P39) by folding the coils of two chains into an alpha-helical coiled coil through hydrophobic interaction of eight pairs of Ile residues. Air oxidation of P39 gave P78, a 78-residue covalent dimer having a disulfide bridge linking its C termini. Raman spectroscopy indicated that both synthetic proteins have high alpha-helical content. Ultraviolet circular dichroic spectroscopy indicated that both dimers contain stable alpha-helical coiled coils. Its C-terminal disulfide bridge renders P78 significantly more stable than P39 to thermal denaturation or denaturation by urea. The coiled coil of P39 was 30% unfolded near 55 degrees C and half-unfolded in 8 M urea, while that of P78 was 30% unfolded only near 85 degrees C. These studies have demonstrated the feasibility of using these ligand, spacer, and coil modules to construct the designed coiled-coil proteins P39 and P78, a stage in the nanometric engineering of receptor-adhesive modular proteins.     

Factors involved in the stability of isolated beta-sheets: Turn sequence, beta-sheet twisting, and hydrophobic surface burial

We have recently reported on the design of a 20-residue peptide able to form a significant population of a three-stranded up-and-down antiparallel beta-sheet in aqueous solution. To improve our beta-sheet model in terms of the folded population, we have modified the sequences of the two 2-residue turns by introducing the segment DPro-Gly, a sequence shown to lead to more rigid type II' beta-turns. The analysis of several NMR parameters, NOE data, as well as Deltadelta(CalphaH), DeltadeltaC(beta), and Deltadelta(Cbeta) values, demonstrates that the new peptide forms a beta-sheet structure in aqueous solution more stable than the original one, whereas the substitution of the DPro residues by LPro leads to a random coil peptide. This agrees with previous results on beta-hairpin-forming peptides showing the essential role of the turn sequence for beta-hairpin folding. The well-defined beta-sheet motif calculated for the new designed peptide (pair-wise RMSD for backbone atoms is 0.5 +/- 0.1 A) displays a high degree of twist. This twist likely contributes to stability, as a more hydrophobic surface is buried in the twisted beta-sheet than in a flatter one. The twist observed in the up-and-down antiparallel beta-sheet motifs of most proteins is less pronounced than in our designed peptide, except for the WW domains. The additional hydrophobic surface burial provided by beta-sheet twisting relative to a "flat" beta-sheet is probably more important for structure stability in peptides and small proteins like the WW domains than in larger proteins for which there exists a significant contribution to stability arising from their extensive hydrophobic cores.     

Do parallel beta-helix proteins have a unique fourier transform infrared spectrum?

Several polypeptides have been found to adopt an unusual domain structure known as the parallel beta-helix. These domains are characterized by parallel beta-strands, three of which form a single parallel beta-helix coil, and lead to long, extended beta-sheets. We have used ATR-FTIR (attenuated total reflectance-fourier transform infrared spectroscopy) to analyze the secondary structure of representative examples of this class of protein. Because the three-dimensional structures of parallel beta-helix proteins are unique, we initiated this study to determine if there was a corresponding unique FTIR signal associated with the parallel beta-helix conformation. Analysis of the amide I region, emanating from the carbonyl stretch vibration, reveals a strong absorbance band at 1638 cm(-1) in each of the parallel beta-helix proteins. This band is assigned to the parallel beta-sheet structure. However, components at this frequency are also commonly observed for beta-sheets in many classes of globular proteins. Thus we conclude that there is no unique infrared signature for parallel beta-helix structure. Additional contributions in the 1638 cm(-1) region, and at lower frequencies, were ascribed to hydrogen bonding between the coils in the loop/turn regions and amide side-chain interactions, respectively. A 13-residue peptide that forms fibrils and has been proposed to form beta-helical structure was also examined, and its FTIR spectrum was compared to that of the parallel beta-helix proteins.     

Theoretical study of volume changes associated with the helix-coil transition of an alanine-rich peptide in aqueous solution

The changes in the partial molar volume (PMV) associated with the conformational transition of an alanine-rich peptide AK16 from the alpha-helix structure to various random coil structures are calculated by the three-dimensional interaction site model (3D-RISM) theory coupled with the Kirkwood-Buff theory. The volume change is analyzed by decomposing it into contributions from geometry and hydration: the changes in the van der Waals, void, thermal, and interaction volume. The total change in the PMV is positive. This is primarily due to the growth of void space within the peptide, which is canceled in part by the volume reduction resulting from the increase in the electrostatic interaction between the peptide and water molecules. The changes in the void and thermal volume of the coil structures are widely distributed and tend to compensate each other. Additionally, the relations between the hydration volume components and the surface properties are investigated. We categorize coil structures into extended coils with the PMV smaller than helix and general coils with the PMV larger than helix. The pressure therefore can both stabilize and destabilize the coil structures. The latter seems to be a more proper model of random coil structures of the peptide.     

Identification of the region of non-Aβ component (NAC) of Alzheimer's disease amyloid responsible for its aggregation and toxicity

The non-beta-amyloid (Abeta) component of Alzheimer's disease amyloid (NAC) and its precursor alpha-synuclein have been linked to amyloidogenesis in several neurodegenerative diseases. NAC and alpha-synuclein both form beta-sheet structures upon ageing, aggregate to form fibrils, and are neurotoxic. We recently established that a peptide comprising residues 3-18 of NAC retains these properties. To pinpoint the exact region responsible we have carried out assays of toxicity and physicochemical properties on smaller fragments of NAC. Toxicity was measured by the ability of fresh and aged peptides to inhibit the reduction of the redox dye 3-(4,5-dimethylthiazol-2-yl)-2,5 diphenyltetrazolium bromide (MTT) by rat pheochromocytoma PC12 cells and human neuroblastoma SHSY-5Y cells. On immediate dissolution, or after ageing, the fragments NAC(8-18) and NAC(8-16) are toxic, whereas NAC(12-18), NAC(9-16) and NAC(8-15) are not. Circular dichroism indicates that none of the peptides displays beta-sheet structure; rather all remain random coil throughout 24 h. However, in acetonitrile, an organic solvent known to induce beta sheet, fragments NAC(8-18) and NAC(8-16) both form beta-sheet structure. Only NAC(8-18) aggregates, as indicated by concentration of peptide remaining in solution after 3 days, and forms fibrils, as determined by electron microscopy. These findings indicate that residues 8-16 of NAC, equivalent to residues 68-76 in alpha-synuclein, comprise the region crucial for toxicity.     

Structure-activity relationships of de novo designed cyclic antimicrobial peptides based on gramicidin S

The cyclic beta-sheet structure possessed by the 10-residue antibiotic peptide gramicidin S was taken as the structural framework for the de novo design of biologically active peptides with membrane-active properties. We have shown from previous studies that gramicidin S is a broad-spectrum antibiotic effective against Gram-positive bacteria, Gram-negative bacteria, and fungi, but is toxic to human red blood cells. We tested the effect of ring size on antimicrobial activity and hemolytic activity on peptides varying from 4 to 16 residues. Interestingly, we were able to dissociate hemolytic activity and antimicrobial activity by increasing the ring size of the peptide to 14 residues (peptide GS14). Furthermore, we increased specificity for microbial membranes while decreasing toxicity to red blood cells by substituting enantiomers (D-amino acids for L-amino acids and vice versa) into the GS14 sequence. The enantiomeric substitutions all disrupted beta-sheet structure in benign medium and decreased peptide amphipathicity. The least amphipathic peptide, produced by substituting a D-Lys at position 4 of GS14 (peptide GS14K4), also had the highest therapeutic index, i.e., highest degree of specificity for microbial cells over human cells. Solution structures of GS14 analogs solved by NMR spectroscopy showed that the D-amino acid side chain was located on the nonpolar face of GS14K4. Another analog, a beta-sheet peptide with reduced amphipathicity (peptide GS14 K3L4), also had a lysine (lysine 3) on the nonpolar face as determined by the NMR structure. Both GS14K4 and GS14 K3L4 had reduced amphipathicity relative to GS14 and much higher therapeutic indices. Finally, the alteration of the nonpolar face hydrophobicity of GS14K4 analogs provided a range of activities and specificities, where the peptides with the intermediate hydrophobicities among the series had the highest therapeutic indices. The optimal peptide hydrophobicities varied depending on the microorganism being tested, with higher hydrophobicity requirements against Gram-positive bacteria and yeast compared with Gram-negative microorganisms. The net result of these studies suggests that it is possible to rationally design a cyclic membrane-active antimicrobial peptide with high specificity towards prokaryotic (bacterial and fungal) membranes and minimal toxicity to eukaryotic (e.g., mammalian) membranes.     

Folding propensity and biological activity of peptides: New insights from conformational properties of a novel peptide derived from Vitreoscilla haemoglobin

The synthetic peptide Vitr-p-13 (YPIVGQELLGAIK-NH(2)), derived from the bacterial dimeric Vitreoscilla haemoglobin (VHb) in the position 95-107, is characterized by a pre-eminent "statistical coil" conformation in water as demonstrated by CD experiments and long time-scale MD simulations. In particular, Vitr-p-13 does not spontaneously adopt an alpha-helix folding in water, but it is rather preferentially found in beta-hairpin-like conformations. Long time-scale MD simulations have also shown that Vitr-p-13 displays a "topological-trigger" which initiates alpha-helix folding within residues 7-10, exactly like seen in the temporins, a group of linear, membrane-active antimicrobial peptides of similar length. At variance with temporins, in Vitr-p-13 such a process is energetically very demanding (+10 kJ/mol) in water at 300 K, and the peptide was found to be unable to bind model membranes in vitro and was devoid of antimicrobial activity. The present results, compared with previous studies on similar systems, strengthen the hypothesis of the requirement of a partial folding when still in aqueous environment to allow a peptide to interact with cell-membranes and eventually exert membrane perturbation-related antibiotic effects on target microbial cells.     

Protein misfolding and amyloid formation for the peptide GNNQQNY from yeast prion protein Sup35: simulation by reaction path annealing

We study the early steps of amyloid formation of the seven residue peptide GNNQQNY from yeast prion-like protein Sup35 by simulating the random coil to beta-sheet and alpha-helix to beta-sheet transition both in the absence and presence of a cross-beta amyloid nucleus. The simulation method at atomic resolution employs a new implementation of a Langevin dynamics "reaction path annealing" algorithm. The results indicate that the presence of amyloid-like cross-beta-sheet strands both facilitates the transition into the cross-beta conformation and substantially lowers the free energy barrier for this transition. This model systems allows us to investigate the energetic and kinetic details of this transition, which is consistent with an auto-catalyzed, nucleation-like mechanism for the formation of beta-amyloid. In particular, we find that electrostatic interactions of peptide backbone dipoles contribute significantly to the stability of the beta-amyloid state. Furthermore, we find water exclusion and interactions of polar side-chains to be driving forces of amyloid formation: the cross-beta conformation is stabilized by burial of polar side-chains and inter-residue hydrogen bonds in the presence of an amyloid-like "seed". These findings are in support of a "dry, polar zipper model" of amyloid formation.     

Structure and inhibitory effects on angiogenesis and tumor development of a new vascular endothelial growth inhibitor

Blocking angiogenesis is an attractive strategy to inhibit tumor growth, invasion, and metastasis. We describe here the structure and the biological action of a new cyclic peptide derived from vascular endothelial growth factor (VEGF). This 17-amino acid molecule designated cyclopeptidic vascular endothelial growth inhibitor (cyclo-VEGI, CBO-P11) encompasses residues 79-93 of VEGF which are involved in the interaction with VEGF receptor-2. In aqueous solution, cyclo-VEGI presents a propensity to adopt a helix conformation that was largely unexpected because only beta-sheet structures or random coil conformations have been observed for macrocyclic peptides. Cyclo-VEGI inhibits binding of iodinated VEGF165 to endothelial cells, endothelial cells proliferation, migration, and signaling induced by VEGF165. This peptide also exhibits anti-angiogenic activity in vivo on the differentiated chicken chorioallantoic membrane. Furthermore, cyclo-VEGI significantly blocks the growth of established intracranial glioma in nude and syngeneic mice and improves survival without side effects. Taken together, these results suggest that cyclo-VEGI is an attractive candidate for the development of novel angiogenesis inhibitor molecules useful for the treatment of cancer and other angiogenesis-related diseases.     

Design of peptide-based inhibitors of human islet amyloid polypeptide fibrillogenesis

Human islet amyloid polypeptide (IAPP) is the major component of amyloid deposits found in the pancreas of over 90% of all cases of type-2 diabetes. We have generated a series of overlapping hexapeptides to target an amyloidogenic region of IAPP (residues 20-29) and examined their effects on fibril assembly. Peptide fragments corresponding to SNNFGA (residues 20-25) and GAILSST (residues 24-29) were strong inhibitors of the beta-sheet transition and amyloid aggregation. Circular dichroism indicated that even at 1:1 molar ratios, these peptides maintained full-length IAPP (1-37) in a largely random coil conformation. Negative stain electron microscopy revealed that co-incubation of these peptides with IAPP resulted in the formation of only semi-fibrous aggregates and loss of the typical high density and morphology of IAPP fibrils. This inhibitory activity, particularly for the SNNFGA sequence, also correlated with a reduction in IAPP-induced cytotoxicity as determined by cell culture studies. In contrast, the peptide NFGAIL (residues 22-27) enhanced IAPP fibril formation. Conversion to the amyloidogenic beta-sheet was immediate and the accompanying fibrils were more dense and complex than IAPP alone. The remaining peptide fragments either had no detectable effects or were only weakly inhibitory. Specificity of peptide activity was illustrated by the fragments, SSNNFG and AILSST. These differed from the most active inhibitors by only a single amino acid residue but delayed the random-to-beta conformational change only when used at higher molar ratios. This study has identified internal IAPP peptide fragments which can regulate fibrillogenesis and may be of therapeutic use for the treatment of type-2 diabetes.     

Study of the effect of poly(L-lysine) on phosphatidic acid and phosphatidylcholine/phosphatidic acid bilayers by raman spectroscopy

The effect of polylysine (PLL) on dimyristoylphosphatidic acid (DMPA), on dimyristoyl-phosphatidylcholine (DMPC), and on mixtures of these lipids was investigated by Raman spectroscopy. These results show that long polylysine (Mr approximately 200,000) increases the stability of the acyl chain matrix of DMPA to form a more closely packed structure with a stoichiometry of one lysine residue per PA molecule. On the other hand, short PLL (Mr 4000) destabilizes the PA bilayer, and the complex formed undergoes a gel to liquid-crystalline transition at a lower temperature than of the pure lipid. For both cases, we have observed that bound polylysine adopts a beta-sheet conformation as opposed to the alpha-helical structure previously found for dipalmitoylphosphatidylglycerol/long PLL complexes [Carrier, D., & Pézolet, M. (1984) Biophys. J. 46, 497-506]. The difference in the thermal behavior of complexes of DMPA with long and short polylysines is believed to be associated with the fact that in the complex the long polypeptide adopts the beta-sheet conformation over the whole range of temperatures investigated while the short one undergoes a change of conformation from beta-sheet of random coil upon heating. Therefore, the conformation of the lipid-bound polypeptides depends on the nature of the polar head group of the lipid, not only on its net charge, and it affects considerably the thermotropism of the lipid. On the other hand, both long and short polylysines show no affinity for phosphatidylcholine since the temperature profiles of DMPC and of DMPC/PLL complexes exhibit exactly the same behavior.(ABSTRACT TRUNCATED AT 250 WORDS)     

Secondary structures of rat lipolytic enzymes: circular dichroism studies and relation to hydrophobic moments

To explore the secondary structures of lingual and pancreatic lipases, circular dichroism measurements were performed. Maximum average ellipticities were used to calculate the percentage of alpha-helices, beta-sheets, and random coils. Lingual lipase had an ellipticity of -20235 +/- 140 deg cm2/dmol (mean +/- SE) at 220 nm suggesting 60% alpha-helix, 20% beta-sheet and 20% random coil structure, but the mean ellipticity for pancreatic lipase was -14093 +/- 82 deg cm2/dmol (mean +/- SE) at 210 nm suggesting a 34.8% alpha-helical, 25% beta-sheet and 40% random coil secondary structure. An alpha-helical stretch of residues with a large hydrophobic moment ("globular" alpha-helix by hydrophobic moment plot) from amino acids 382 through 389 at the COOH-terminal end of lingual lipase was noted. This sequence, absent in pancreatic lipase, may account for the avid binding of lingual lipase to fat emulsion particles.