Biochemical characteristics of three feruloyl esterases with a broad substrate spectrum from Bacillus amyloliquefaciens H47

Feruloyl esterases (Faes) are a subclass of the carboxylic esterases that hydrolyze the ester bonds between ferulic acid and polysaccharides in plant cell walls. Until now, the biochemical characteristics of FAEs from Bacillus spp. have not been reported. In this study, a strain with high activity of FAEs, Bacillus amyloliquefaciens H47 was screened from 122 Bacillus – type strains. Finally, three FAEs (BaFae04, BaFae06, and BaFae09) were identified. Comparing with other bacterial FAEs, these novel FAEs exhibited low sequence identities (less than 30%). The profiles of 52 esterase substrates showed that the three FAEs had a broad substrate spectrum and could effectively hydrolyze several common FAE substrates, such as methyl ferulate, ethyl caffeate, methyl p-coumarate, methyl sinapate, and chlorogenic acid. Furthermore, the three FAEs also can release ferulic acid from destarched wheat bran. They showed maximal activity with an optimal pH of 8.0 at 30 °C, 35 °C, and 40 °C, respectively. BaFae04 showed high stability in the temperature range of 25–60 °C for 1 h and retained 59% of its activity at 60 °C. The present study displays some useful characteristics of FAEs for potential industrial application and contributes to our understanding of FAEs.     

Application of Two Newly Identified and Characterized Feruloyl Esterases from Streptomyces sp. in the Enzymatic Production of Ferulic Acid from Agricultural Biomass

Ferulic acid (FA), a component of hemicellulose in plant cell walls, is a phenolic acid with several potential applications based on its antioxidant properties. Recent studies have shown that feruloyl esterase (FAE) is a key bacterial enzyme involved in FA production from agricultural biomass. In this study, we screened a library of 43 esterases from Streptomyces species and identified two enzymes, R18 and R43, that have FAE activity toward ethyl ferulate. In addition, we characterized their enzyme properties in detail. R18 and R43 showed esterase activity toward other hydroxycinnamic acid esters as well, such as methyl p-coumarate, methyl caffeate, and methyl sinapinate. The amino acid sequences of R18 and R43 were neither similar to each other, nor to other FAEs. We found that R18 and R43 individually showed the ability to produce FA from corn bran; however, combination with other Streptomyces enzymes, namely xylanase and α-l-arabinofuranosidase, increased FA production from biomass such as corn bran, defatted rice bran, and wheat bran. These results suggest that R18 and R43 are effective FAEs for the enzymatic production of FA from biomass.     

A thermostable feruloyl-esterase from the hemicellulolytic bacterium <Emphasis Type="Italic">Thermobacillus xylanilyticus</Emphasis> releases phenolic acids from non-pretreated plant cell walls

A gene (Tx-est1) encoding a thermostable feruloyl-esterase was isolated from the genome of the Gram-positive hemicellulolytic thermophilic bacterium Thermobacillus xylanilyticus. This gene contains an open reading frame of 1,020 bp encoding a protein with molecular mass of 37.4 kDa, similar to feruloyl-esterases from cellulolytic bacteria and fungi. The recombinant enzyme Tx-Est1 was expressed and produced in Escherichia coli. Tx-Est1 contains the conserved putative lipase residues Ser 202, Asp 287, and His 322 which act as catalytic triad in its C-terminus part. Purified Tx-Est1 was active against phenolic acid derivatives and stable at high temperatures. Optimal activity was observed at 65 °C and the optimal pH was around 8.5. The kinetic parameters of the esterase were determined on various substrates. The enzyme displayed activity against methyl esters of hydrocinnamic acids and feruloylated arabino-xylotetraose, exhibiting high specificity and affinity for the latter. Our results showed that Tx-Est1 is a thermostable feruloyl-esterase which could be useful to hydrolyze arabinoxylans from graminaceous plant cell walls as the enzyme is able to release phenolic acids from a lignocellulose biomass.     

A halotolerant type A feruloyl esterase from Pleurotus eryngii

An extracellular feruloyl esterase (PeFaeA) from the culture supernatant of Pleurotus eryngii was purified to homogeneity using cation exchange, hydrophobic interaction, and size exclusion chromatography. The length of the complete coding sequence of PeFaeA was determined to 1668 bp corresponding to a protein of 555 amino acids. The catalytic triad of Ser-Glu-His demonstrated the uniqueness of the enzyme compared to previously published FAEs. The purified PeFaeA was a monomer with an estimated molecular mass of 67 kDa. Maximum feruloyl esterase (FAE) activity was observed at pH 5.0 and 50 °C, respectively. Metal ions (5 mM), except Hg²⁺, had no significant influence on the enzyme activity. Substrate specificity profiling characterized the enzyme as a type A FAE preferring bulky natural substrates, such as feruloylated saccharides, rather than small synthetic ones. K_m and k_cat of the purified enzyme for methyl ferulate were 0.15 mM and 0.85 s⁻¹. In the presence of 3 M NaCl activity of the enzyme increased by 28 %. PeFaeA alone released only little ferulic acid from destarched wheat bran (DSWB), whereas after addition of Trichoderma viride xylanase the concentration increased more than 20 fold.     

Production and Purification of Thermostable β-Glucosidase from Mucor miehei YH-10

A thermophilic fungus, Mucor miehei YH-10, isolated from manure was selected to produce thermostable β-glucosidase among 207 isolates. When Mucor miehei YH-10 was grown on wheat bran medium, the maximal accumulation of thermostable β-glucosidase was obtained after 4 days at 50°C, The β-glucosidase had an optimal temperature of 60°C and retained 73% of original activity after heating at 95°C for 5 min. The β-glucosidase was fractionated by Sephadex G-100 chromatography into two components during the purification steps. These components were further purified by consecutive column chromatographies until they were homogeneous on disc electrophoresis. One retained 56% of original activity after heating at 95°C for 5 min, whereas the other was completely inactivated after heating at 80°C for 5 min.     

Alternaria alternata as a new fungal enzyme system for the release of phenolic acids from wheat and triticale brans

This study describes the release of antioxidant ferulic acid from wheat and triticale brans by mixtures of extracellular enzymes produced in culture by a strain FC007 of Alternaria alternata, a dark mold originally isolated from Canadian wood log. The genus of the mold was confirmed as Alternaria by 18S ribosomal DNA characterization. Enzyme activities for feruloyl esterase (FAE) and polysaccharide hydrolyzing enzymes were measured, and conditions for release of ferulic acid and reducing sugars from the mentioned brans were evaluated. The highest level of FAE activity (89 ± 7 mU ml⁻¹ fermentation culture) was obtained on the fifth day of fermentation on wheat bran as growth substrate. Depending on biomass and processing condition, up to 91.2 or 72.3% of the ferulic acid was released from wheat bran and triticale bran, respectively, indicating the proficiency of A. alternata extracellular enzymes in plant cell wall deconstruction. The apparent high extraction of ferulic acid from wheat and triticale brans represents a potential advantage of using a whole fungal cell enzyme complement over yields reported previously through an artificial assembly of cloned FAE with a particular xylanase in a cocktail format.     

Hydrolytic properties of a thermostable α‐l‐arabinofuranosidase from Caldicellulosiruptor saccharolyticus

Aims: To characterize of a thermostable recombinant α‐l ‐arabinofuranosidase from Caldicellulosiruptor saccharolyticus for the hydrolysis of arabino‐oligosaccharides to l ‐arabinose. Methods and Results: A recombinant α‐l ‐arabinofuranosidase from C. saccharolyticus was purified by heat treatment and Hi‐Trap anion exchange chromatography with a specific activity of 28·2 U mg^?1. The native enzyme was a 58‐kDa octamer with a molecular mass of 460 kDa, as measured by gel filtration. The catalytic residues and consensus sequences of the glycoside hydrolase 51 family of α‐l ‐arabinofuranosidases were completely conserved in α‐l ‐arabinofuranosidase from C. saccharolyticus. The maximum enzyme activity was observed at pH 5·5 and 80°C with a half‐life of 49 h at 75°C. Among aryl‐glycoside substrates, the enzyme displayed activity only for p‐nitrophenyl‐α‐l ‐arabinofuranoside [maximum k_cat/K_m of 220 m(mol l^?1)^?1 s^?1] and p‐nitrophenyl‐α‐l ‐arabinopyranoside. This substrate specificity differs from those of other α‐l ‐arabinofuranosidases. In a 1 mmol l^?1 solution of each sugar, arabino‐oligosaccharides with 2–5 monomer units were completely hydrolysed to l ‐arabinose within 13 h in the presence of 30 U ml^?1 of enzyme at 75°C. Conclusions: The novel substrate specificity and hydrolytic properties for arabino‐oligosaccharides of α‐l ‐arabinofuranosidase from C. saccharolyticus demonstrate the potential in the commercial production of l ‐arabinose in concert with endoarabinanase and/or xylanase. Significance and Impact of the Study: The findings of this work contribute to the knowledge of hydrolytic properties for arabino‐oligosaccharides performed by thermostable α‐l ‐arabinofuranosidase.     

A type D ferulic acid esterase from Streptomyces werraensis affects the volume of wheat dough pastries

A type D ferulic acid esterase (FAE) was identified in the culture supernatant of Streptomyces werraensis, purified, sequenced, and heterologously produced in E. coli BL21(DE3)Star by co-expressing chaperones groES-groEL (69 U L⁻¹). The unique enzyme with a mass of about 48 kDa showed no similarity to other FAEs, and only moderate homology (78.5%) to a Streptomycete β-xylosidase. The purified reSwFAED exhibited a temperature optimum of 40 °C, a pH optimum in the range from pH seven to eight and a clear preference for bulky natural substrates, such as 5-O-trans-feruloyl-l-arabinofuranose (FA) and β-d-xylopyranosyl-(1→2)-5-O-trans-feruloyl-l-arabinofuranose (FAX), compared to the synthetic standard substrate methyl ferulate. Treatment of wheat dough with as little as 0.03 U or 0.3 U kg⁻¹ reSwFAED activity resulted in a significant increase of the bun volume (8.0 or 9.7%, resp.) after baking when combined with polysaccharide-degrading enzymes from Aspergillus. For the first time, the long-standing, but rarely proven positive effect of a FAE in baking was confirmed.

     

Heterologous expression of a gene for thermostable xylanase from <Emphasis Type="Italic">Chaetomium</Emphasis> <Emphasis Type="Italic">thermophilum</Emphasis> in <Emphasis Type="Italic">Pichia</Emphasis> <Emphasis Type="Italic">pastoris</Emphasis> GS115

We studied heterologous expression of xylanase 11A gene of Chaetomium thermophilum in Pichia pastoris and characterized the thermostable nature of the purified gene product. For this purpose, the xylanase 11A gene of C. thermophilum was cloned in P. pastoris GS115 under the control of AOX1 promoter. The maximum extracellular activity of recombinant xylanase (xyn698: gene with intron) was 15.6 U ml⁻¹ while that of recombinant without intron (xyn669) was 1.26 U ml⁻¹ after 96 h growth. The gene product was purified apparently to homogeneity level. The optimum temperature of pure recombinant xylanase activity was 70°C and the enzyme retained its 40.57% activity after incubation at 80°C for 10 min. It exhibited quite lower demand of activation energy, enthalpy, Gibbs free energy, entropy, and xylan binding energy during substrate hydrolysis than that required by that of the donor, thus indicating its thermostable nature. pH-dependent catalysis showed that it was quite stable in a pH range of 5.5–8.5. This revealed that gene was successfully processed in P. pastoris and remained heat stable and may qualify for its potential use in paper and pulp and animal feed applications.     

A new xylanase from thermoalkaline <Emphasis Type="Italic">Anoxybacillus</Emphasis> sp. E2 with high activity and stability over a broad pH range

A xylanase gene, xynE2, was cloned from thermoalkaline Anoxybacillus sp. E2 and was expressed in Escherichia coli BL21 (DE3). The gene consisted of 987 bp and encoded a 328-residue xylanase with a calculated molecular weight of 38.8 kDa. On the basis of amino acid sequence similarities, this enzyme was assigned as a member of glycoside hydrolase family 10. Purified recombinant XynE2 showed maximal activity at pH 7.8 and 65°C, and was thermostable at 60°C. The enzyme was highly active and stable over a broad pH range, showing more than 90% of maximal activity at pH 6.6–pH 8.6 and retaining more than 80% of activity at pH 4.6–pH 12.0, 37°C for 1 h, respectively. These favorable properties make XynE2 a good candidate in the pulp and paper industries. This is the first report on gene cloning, expression and characterization of a xylanase from the genus Anoxybacillus.     

Optimized synthesis of novel prenyl ferulate performed by feruloyl esterases from Myceliophthora thermophila in microemulsions

Five feruloyl esterases (FAEs; EC 3.1.1.73), FaeA1, FaeA2, FaeB1, and FaeB2 from Myceliophthora thermophila C1 and MtFae1a from M. thermophila ATCC 42464, were tested for their ability to catalyze the transesterification of vinyl ferulate (VFA) with prenol in detergentless microemulsions. Reaction conditions were optimized investigating parameters such as the medium composition, the substrate concentration, the enzyme load, the pH, the temperature, and agitation. FaeB2 offered the highest transesterification yield (71.5 ± 0.2%) after 24 h of incubation at 30 °C using 60 mM VFA, 1 M prenol, and 0.02 mg FAE/mL in a mixture comprising of 53.4:43.4:3.2 v/v/v n-hexane:t-butanol:100 mM MOPS-NaOH, pH 6.0. At these conditions, the competitive side hydrolysis of VFA was 4.7-fold minimized. The ability of prenyl ferulate (PFA) and its corresponding ferulic acid (FA) to scavenge 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals was significant and similar (IC₅₀ 423.39 μM for PFA, 329.9 μM for FA). PFA was not cytotoxic at 0.8–100 μM (IC₅₀ 220.23 μM) and reduced intracellular reactive oxygen species (ROS) in human skin fibroblasts at concentrations ranging between 4 and 20 μM as determined with the dichloro-dihydro-fluorescein diacetate (DCFH-DA) assay.

     

Xylanase production using inexpensive agricultural wastes and its partial characterization from a halophilic <Emphasis Type="Italic">Chromohalobacter</Emphasis> sp. TPSV 101

A halophilic and alkali-tolerant Chromohalobacter sp. TPSV 101 with an ability to produce extracellular halophilic, alkali-tolerant and moderately thermostable xylanase was isolated from solar salterns. Identification of the bacterium was done based upon biochemical tests and 16S rRNA sequence. The culture conditions for higher xylanase production were optimized with respect to NaCl, pH, temperature, substrates and metal ions and additives. Maximum xylanase production was achieved in the medium with 20% NaCl, pH-9.0 at 40°C supplemented with 1% (w/v) sugarcane bagasse and 0.5% feather hydrolysate as carbon and nitrogen sources. Sugarcane bagasse (250 U/ml) and wheat bran (190 U/ml) were the best inducer of xylanase when used as carbon source as compared to xylan (61 U/ml). The xylanase that was partially purified by protein concentrator had a molecular mass of 15 kDa approximately. The xylanase from Chromohalobacter sp. TPSV 101 was active at pH 9.0 and required 20% NaCl for optimal xylanolytic activity and was active over a broad range of temperature 40–80°C with 65°C as optimum. The early stage hydrolysis products of sugarcane bagasse were xylose and xylobiose, after longer periods of incubation only xylose was detected.     

Atypical Ca<Superscript>2+</Superscript>-independent,raw-starch hydrolysing α-amylase from <Emphasis Type="Italic">Bacillus</Emphasis> sp. GRE1: characterization and gene isolation

Bacillus sp. GRE1 isolated from an Ethiopian hyperthermal spring produced raw-starch digesting, Ca²⁺-independent thermostable α-amylase. Enzyme production in shake flask experiments using optimum nutrient supplements and environmental conditions was 2,360 U l⁻¹. Gel filtration chromatography yielded a purification factor of 33.6-fold and a recovery of 46.5%. The apparent molecular weight of the enzyme was 55 kDa as determined by SDS-PAGE. Presence or absence of Ca²⁺ produced similar temperature optima of 65–70°C. The optimum pH was in the range of 5.5–6.0. The enzyme maintained 50% of its original activity after 45 min of incubation at 80°C and was stable at a pH range of 5.0–9.0. The V _max and K _m values for soluble starch were 42 mg reducing sugar min⁻¹ and 4.98 mg starch ml⁻¹, respectively. Strong inhibitors of enzyme activity included Cu²⁺, Zn²⁺ and Fe²⁺. The enzyme coding gene and the deduced protein translation revealed a characteristic but markedly atypical homology to Bacillus species α-amylase sequences. The enzyme hydrolyzed wheat, corn and tapioca starch granules efficiently below their gelatinization temperatures. Rather than the higher oligosaccharides normally produced by Bacillus α-amylases operating at high temperatures, maltose was the major hydrolysis product with the present enzyme.     

Expression, characterization and structural modelling of a feruloyl esterase from the thermophilic fungus Myceliophthora thermophila

A ferulic acid esterase (FAE) from the thermophilic fungus Myceliophthora thermophila (synonym Sporotrichum thermophile), belonging to the carbohydrate esterase family 1 (CE-1), was functionally expressed in methylotrophic yeast Pichia pastoris. The putative FAE from the genomic DNA was successfully cloned in P. pastoris X-33 to confirm that the enzyme exhibits FAE activity. The recombinant FAE was purified to its homogeneity (39 kDa) and subsequently characterized using a series of model substrates including methyl esters of hydroxycinnamates, alkyl ferulates and monoferuloylated 4-nitrophenyl glycosides. The substrate specificity profiling reveals that the enzyme shows a preference for the hydrolysis of methyl caffeate and p-coumarate and a strong preference for the hydrolysis of n-butyl and iso-butyl ferulate. The enzyme was active on substrates containing ferulic acid ester linked to the C-5 and C-2 linkages of arabinofuranose, whilst it was found capable of de-esterifying acetylated glucuronoxylans. Ferulic acid (FA) was efficiently released from destarched wheat bran when the esterase was incubated together with an M3 xylanase from Trichoderma longibrachiatum (a maximum of 41% total FA released after 1 h incubation). Prediction of the secondary structure of MtFae1a was performed in the PSIPRED server whilst modelling the 3D structure was accomplished by the use of the HH 3D structure prediction server.     

A thermophilic and acid stable family-10 xylanase from the acidophilic fungus Bispora sp. MEY-1

A complete gene, xyl10C, encoding a thermophilic endo-1,4-β-xylanase (XYL10C), was cloned from the acidophilic fungus Bispora sp. MEY-1 and expressed in Pichia pastoris. XYL10C shares highest nucleotide and amino acid sequence identities of 57.3 and 49.7%, respectively, with a putative xylanase from Aspergillus fumigatus Af293 of glycoside hydrolase family 10. A high expression level in P. pastoris (73,400 U ml⁻¹) was achieved in a 3.7–l fermenter. The purified recombinant XYL10C was thermophilic, exhibiting maximum activity at 85°C, which is higher than that reported from any fungal xylanase. The enzyme was also highly thermostable, exhibiting ~100% of the initial activity after incubation at 80°C for 60 min and >87% of activity at 90°C for 10 min. The half lives of XYL10C at 80 and 85°C were approximately 45 and 3 h, respectively. It had two activity peaks at pH 3.0 and 4.5–5.0 (maximum), respectively, and was very acid stable, retaining more than 80% activity after incubation at pH 1.5−6.0 for 1 h. The enzyme was resistant to Co²⁺, Mn²⁺, Cr³⁺ and Ag⁺. The specific activity of XYL10C for oat spelt xylan was 18,831 U mg⁻¹. It also had wide substrate specificity and produced simple products (65.1% xylose, 25.0% xylobiose and 9.9% xylan polymer) from oat spelt xylan.     

Production and properties of xylanases from Aspergillus terricola Marchal and Aspergillus ochraceus and their use in cellulose pulp bleaching

Aspergillus terricola and Aspergillus ochraceus, isolated from Brazilian soil, were cultivated in Vogel and Adams media supplemented with 20 different carbon sources, at 30 °C, under static conditions, for 120 and 144 h, respectively. High levels of cellulase-free xylanase were produced in birchwood or oat spelt xylan-media. Wheat bran was the most favorable agricultural residue for xylanase production. Maximum activity was obtained at 60 °C and pH 6.5 for A. terricola, and 65 °C and pH 5.0 for A. ochraceus. A. terricola xylanase was stable for 1 h at 60 °C and retained 50% activity after 80 min, while A. ochraceus xylanase presented a t ₅₀ of 10 min. The xylanases were stable in an alkali pH range. Biobleaching of 10 U/g dry cellulose pulp resulted in 14.3% delignification (A. terricola) and 36.4% (A. ochraceus). The brightness was 2.4–3.4% ISO higher than the control. Analysis in SEM showed defibrillation of the microfibrils. Arabinase traces and β-xylosidase were detected which might act synergistically with xylanase.     

High-level expression and characterization of a highly thermostable chitosanase from <Emphasis Type="Italic">Aspergillus fumigatus</Emphasis> in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

The sequence of an endo-chitosanase gene (CSN) from Aspergillus fumigatus was optimized based on the preferred codons of Pichia pastoris and synthesized in vitro through overlapping PCR (CSN-P). The gene was cloned into a yeast expression vector, pHBM905A, and secretorily expressed in Pichia pastoris GS115. The yield of CSN-P reached ~3 mg/ml with a high-density fermentation in a 14 l fermenter and the enzyme activity was ~25,000 U/ml. The enzyme had half-lives of 2.5 h at 80°C, 1 h at 90°C and 32 min at 100°C. It retained 70% activity after incubation with 10 M urea at room temperature for 30 min. This enzyme was used for a large-scale preparation of oligosaccharides: 3 g enzyme converted 200 kg chitosan into oligosaccharides in 24 h at 60°C.     

Chitinase Production in Solid-State Fermentation from <Emphasis Type="Italic">Oerskovia xanthineolytica</Emphasis> NCIM 2839 and its Application in Fungal Protoplasts Formation

The present study reports the economic production of thermostable chitinase production from Oerskovia xanthineolytica NCIM 2839 by solid-state fermentation (SSF) technique and its application in fungal protoplasts formation. The Oerskovia xanthineolytica NCIM 2839 was found to produce thermostable chitinase 148 U g⁻¹ of solid substrate in SSF using wheat bran with colloidal chitin as base. Protoplasts of A. niger were formed by using crude chitinase produced in SSF and formed protoplasts were confirmed by using scanning electron microscopy. This is the simple and economical method for protoplast formation which makes it possible applications in strain improvement of various fungi by protoplasts fusion in Biotechnological industries.     

Biochemical characterization of a novel thermostable xyloglucanase from an alkalothermophilic Thermomonospora sp.

Xyloglucanase from an extracellular culture filtrate of alkalothermophilic Thermomonospora sp. was purified to homogeneity with a molecular weight of 144 kDa as determined by SDS-PAGE and exhibited specificity towards xyloglucan with apparent K _m of 1.67 mg/ml. The enzyme was active at a broad range of pH (5–8) and temperatures (40–80°C). The optimum pH and temperature were 7 and 70°C, respectively. The enzyme retained 100% activity at 50°C for 60 h with half-lives of 14 h, 6 h and 7 min at 60, 70 and 80°C, respectively. The kinetics of thermal denaturation revealed that the inactivation at 80°C is due to unfolding of the enzyme as evidenced by the distinct red shift in the wavelength maximum of the fluorescence profile. Xyloglucanase activity was positively modulated in the presence of Zn²⁺, K⁺, cysteine, β-mercaptoethanol and polyols. Thermostability was enhanced in the presence of additives (polyols and glycine) at 80°C. A hydrolysis of 55% for galactoxyloglucan (GXG) from tamarind kernel powder (TKP) was obtained in 12 h at 60°C and 6 h at 70°C using thermostable xyloglucanases, favouring a reduction in process time and enzyme dosage. The enzyme was stable in the presence of commercial detergents (Ariel), indicating its potential as an additive to laundry detergents.     

Site-Directed Mutagenesis and Thermostability of Xylanase XYNB from <Emphasis Type="Italic">Aspergillus niger</Emphasis> 400264

Xylanase is one of the most important hemicellulases in industry. However, its low thermostability limits its applications. In this study, one thermostable xylanase-producing strain 400264 was obtained from screening 11 Aspergillus niger strains (producing thermotolerant xylanase), and the optimum temperature of crude xylanase extracted from it was 55°C. Original activity of the crude xylanase is 64% at 60°C and 55% at 85°C with an incubation time of 30 min, respectively. After the expression of recombinant xylanase gene (xynA/xynB), the XYNB (xylanase B) showed higher thermostability than XYNA (xylanase A). Recombinant enzyme XYNB retained 94% of its activity for 10 min at 85°C, while XYNA with no activity left. Site-directed mutagenesis was performed to replace Ala33 of XYNB by Ser33 resulting 19% decrease in enzyme activity after incubating at 85°C for 30 min. It suggested that the Ala33 residue may have a certain effect on the thermophilic adaptation of xylanase.