Characterization of a Cellobiose Phosphorylase from a Hyperthermophilic Eubacterium,Thermotoga maritima MSB8

The cepA putative gene encoding a cellobiose phosphorylase of Thermotoga maritima MSB8 was cloned, expressed in Escherichia coli BL21-codonplus-RIL and characterized in detail. The maximal enzyme activity was observed at pH 6.2 and 80°C. The energy of activation was 74 kJ/mol. The enzyme was stable for 30 min at 70°C in the pH range of 6-8. The enzyme phosphorolyzed cellobiose in an random-ordered bi bi mechanism with the random binding of cellobiose and phosphate followed by the ordered release of D-glucose and α-D-glucose-1-phosphate. The K _m for cellobiose and phosphate were 0.29 and 0.15 mM respectively, and the k _cat was 5.4 s^-1. In the synthetic reaction, D-glucose, D-mannose, 2-deoxy-D-glucose, D-glucosamine, D-xylose, and 6-deoxy-D-glucose were found to act as glucosyl acceptors. Methyl-β-D-glucoside also acted as a substrate for the enzyme and is reported here for the first time as a substrate for cellobiose phosphorylases. D-Xylose had the highest (40 s^-1) k _cat followed by 6-deoxy-D-glucose (17 s^-1) and 2-deoxy-D-glucose (16 s^-1). The natural substrate, D-glucose with the k _cat of 8.0 s^-1 had the highest (1.1×10⁴ M^-1 s^-1) k _cat/K _m compared with other glucosyl acceptors. D-Glucose, a substrate of cellobiose phosphorylase, acted as a competitive inhibitor of the other substrate, α-D-glucose-1-phosphate, at higher concentrations.     

Octameric enolase from the hyperthermophilic bacterium Thermotoga maritima: purification, characterization, and image processing.

Enolase (2-phospho-D-glycerate hydrolase; EC 4.2.1.11) from the hyperthermophilic bacterium Thermotoga maritima was purified to homogeneity. The N-terminal 25 amino acids of the enzyme reveal a high degree of similarity to enolases from other sources. As shown by sedimentation analysis and gel-permeation chromatography, the enzyme is a 345-kDa homoctamer with a subunit molecular mass of 48 +/- 5 kDa. Electron microscopy and image processing yield ring-shaped particles with a diameter of 17 nm and fourfold symmetry. Averaging of the aligned particles proves the enzyme to be a tetramer of dimers. The enzyme requires divalent cations in the activity assay, Mg2+ being most effective. The optimum temperature for catalysis is 90 degrees C, the temperature dependence yields a nonlinear Arrhenius profile with limiting activation energies of 75 kJ mol-1 and 43 kJ mol-1 at temperatures below and above 45 degrees C. The pH optimum of the enzyme lies between 7 and 8. The apparent Km values for 2-phospho-D-glycerate and Mg2+ at 75 degrees C are 0.07 mM and 0.03 mM; with increasing temperature, they are decreased by factors 2 and 30, respectively. Fluoride and phosphate cause competitive inhibition with a Ki of 0.14 mM. The enzyme shows high intrinsic thermal stability, with a thermal transition at 90 and 94 degrees C in the absence and in the presence of Mg2+.     

Electrochemically applied potentials induce growth and metabolic shift changes in the hyperthermophilic bacterium Thermotoga maritima MSB8

Bioelectrochemical systems are an attractive technology for regulating microbial activity. The effect of an applied potential on hydrolysis of starch in Thermotoga maritima as a model bacterium was investigated in this study. A cathodic potential (?0.6 and ?0.8 V) induced 5-h earlier growth initiation of T. maritima with starch as the polymeric substrate than that without electrochemical regulation. Moreover, metabolic patterns of starch consumption were altered by the cathodic potential. While acetate, H², and CO₂ were the major products of starch consumption in the control experiment without electrolysis, lactate accumulation was detected rather than decreased acetate and H₂ levels in the bioelectrochemical system experiments with the cathodic potential. These results indicate that the applied potential could control microbial activities related to the hydrolysis of polymeric organic substances and shift carbon and electron flux to a lactate-producing reaction in T. maritima.     

Xylanase XynA from the hyperthermophilic bacterium Thermotoga maritima: structure and stability of the recombinant enzyme and its isolated cellulose-binding domain.

The hyperthermophilic bacterium Thermotoga maritima is capable of gaining metabolic energy utilizing xylan. XynA, one of the corresponding hydrolases required for its degradation, is a 120-kDa endo-1,4-D-xylanase exhibiting high intrinsic stability and a temperature optimum approximately 90 degrees C. Sequence alignments with other xylanases suggest the enzyme to consist of five domains. The C-terminal part of XynA was previously shown to be responsible for cellulose binding (Winterhalter C, Heinrich P, Candussio A, Wich G, Liebl W. 1995. Identification of a novel cellulose-binding domain within the multi-domain 120 kDa Xylanase XynA of the hyperthermophilic bacterium Thermotoga maritima. Mol Microbiol 15:431-444). In order to characterize the domain organization and the stability of XynA and its C-terminal cellulose-binding domain (CBD), the two separate proteins were expressed in Escherichia coli. CBD, because of its instability in its ligand-free form, was expressed as a glutathione S-transferase fusion protein with a specific thrombin cleavage site as linker. XynA and CBD were compared regarding their hydrodynamic and spectral properties. As taken from analytical ultracentrifugation and gel permeation chromatography, both are monomers with 116 and 22 kDa molecular masses, respectively. In the presence of glucose as a ligand, CBD shows high intrinsic stability. Denaturation/renaturation experiments with isolated CBD yield > 80% renaturation, indicating that the domain folds independently. Making use of fluorescence emission and far-UV circular dichroism in order to characterize protein stability, guanidine-induced unfolding of XynA leads to biphasic transitions, with half-concentrations c1/2 (GdmCl) approximately 4 M and > 5 M, in accordance with the extreme thermal stability. At acid pH, XynA exhibits increased stability, indicated by a shift of the second guanidine-transition from 5 to 7 M GdmCl. This can be tentatively attributed to the cellulose-binding domain. Differences in the transition profiles monitored by fluorescence emission and dichroic absorption indicate multi-state behavior of XynA. In the case of CBD, a temperature-induced increase in negative ellipticity at 217 nm is caused by alterations in the environment of aromatic residues that contribute to the far-UV CD in the native state.     

Probing the structural basis for the difference in thermostability displayed by family 10 xylanases

Thermostability is an important property of industrially significant hydrolytic enzymes: understanding the structural basis for this attribute will underpin the future biotechnological exploitation of these biocatalysts. The Cellvibrio family 10 (GH10) xylanases display considerable sequence identity but exhibit significant differences in thermostability; thus, these enzymes represent excellent models to examine the structural basis for the variation in stability displayed by these glycoside hydrolases. Here, we have subjected the intracellular Cellvibrio mixtus xylanase CmXyn10B to forced protein evolution. Error-prone PCR and selection identified a double mutant, A334V/G348D, which confers an increase in thermostability. The mutant has a Tm 8 degrees C higher than the wild-type enzyme and, at 55 degrees C, the first-order rate constant for thermal inactivation of A334V/G348D is 4.1 x 10(-4) min(-1), compared to a value of 1.6 x 10(-1) min(-1) for the wild-type enzyme. The introduction of the N to C-terminal disulphide bridge into A334V/G348D, which increases the thermostability of wild-type CmXyn10B, conferred a further approximately 2 degrees C increase in the Tm of the double mutant. The crystal structure of A334V/G348D showed that the introduction of Val334 fills a cavity within the hydrophobic core of the xylanase, increasing the number of van der Waals interactions with the surrounding aromatic residues, while O(delta1) of Asp348 makes an additional hydrogen bond with the amide of Gly344 and O(delta2) interacts with the arabinofuranose side-chain of the xylose moiety at the -2 subsite. To investigate the importance of xylan decorations in productive substrate binding, the activity of wild-type CmXyn10B, the mutant A334V/G348D, and several other GH10 xylanases against xylotriose and xylotriose containing an arabinofuranose side-chain (AX3) was assessed. The enzymes were more active against AX3 than xylotriose, providing evidence that the arabinose side-chain makes a generic contribution to substrate recognition by GH10 xylanases.     

Study of the active site residues of a glycoside hydrolase family 8 xylanase

Site-directed mutagenesis and a comparative characterisation of the kinetic parameters, pH dependency of activity and thermal stability of mutant and wild-type enzymes have been used in association with crystallographic analysis to delineate the functions of several active site residues in a novel glycoside hydrolase family 8 xylanase. Each of the residues investigated plays an essential role in this enzyme: E78 as the general acid, D281 as the general base and in orientating the nucleophilic water molecule, Y203 in maintaining the position of the nucleophilic water molecule and in structural integrity and D144 in sugar ring distortion and transition state stabilization. Interestingly, although crystal structure analyses and the pH-activity profiles clearly identify the functions of E78 and D281, substitution of these residues with their amide derivatives results in only a 250-fold and 700-fold reduction in their apparent k(cat) values, respectively. This, in addition to the observation that the proposed general base is not conserved in all glycoside hydrolase family 8 enzymes, indicates that the mechanistic architecture in this family of inverting enzymes is more complex than is conventionally believed and points to a diversity in the identity of the mechanistically important residues as well as in the arrangement of the intricate microenvironment of the active site among members of this family.     

海栖热袍菌极耐高温木聚糖酶基因xynB64在大肠杆菌中的融合表达

来源于极端嗜热菌海栖热袍菌(Thermotoga maritima MSB8)的木聚糖酶B具有极高的热稳定性,在饲料、造纸、能源和食品医药行业具有巨大应用潜力。携带酶基因xynB64的pET28a(+)重组载体在宿主大肠杆菌BL21(DE3)中诱导表达,重组酶活力较低。更换宿主为携带稀有tRNA基因的大肠杆菌:BL21-CodonPlus(DE3)-RIPL和Rosetta(DE3)后,酶活力分别提高了197%和277%,但是后者中的表达会形成部分包涵体。宿主菌为大肠杆菌Rosetta(DE3),更换载体为4种融合表达载体pET32a(+)、pET42a(+)、pET43.1a(+)和pMAL-c2X进行表达,重组酶分别融合了Trx、GST、Nus和MBP标签。其中Rosetta(DE3)/pMAL-c2X-xynB64表达酶活力最高,相当于Rosetta(DE3)/pET28a-xynB64表达酶的88%,而且目的酶表达量占全细胞蛋白的40%,几乎不形成包涵体。     

极端耐热木聚糖酶基因在大肠杆菌和毕赤酵母中的高效表达

以海栖热袍菌 (Thermotoga maritima) MSB8菌株基因组DNA为模板,通过PCR扩增出木聚糖酶（XylanaseB）基因, 将此基因克隆至大肠杆菌表达载体pET_28a（+）和毕赤酵母表达载体pPIC9K,并分别转化大肠杆菌 BL21和毕赤酵母GS115。该木聚糖酶在大肠杆菌细胞中表达量高, 但不能分泌; 而在毕赤酵母细胞的表达产物可分泌至胞外。酶学性质分析表明,此酶分子量约为40kD,其最适反应温度为90℃, 最适反应pH值为6.65,且在碱性条件下稳定,具有重要的工业应用前景。     

Purification and characterization of a highly thermostable glucose isomerase produced by the extremely thermophilic eubacterium, Thermotoga maritima

Thermotoga maritima, among the most thermophilic eubacteria currently known, produces glucose isomerase when grow in the presence of xylose. The purified enzyme is a homotetramer with submit molecular Wight of about 45,000. It has a number of features in common with previously described glucose isomerases-pH optimum of 6.5 to 7.5, presence of activesite histidine, requirement for metal cations such as Co(2+) and Mg(2+), and preference for xylose as substrate. In addition, it has significant sequence/structural homology with other glucose isomerases, as shown by both N-terminal sequencing and immunological crossreactivity. The T. maritima enzyme is distinguished by its extreme thermostability-a temperature optimum of 105 to 110 degrees C, and an estimated half-life of 10 minutes at 120 degrees C, pH 7.0. The high degree of thermostability, coupled with a neutral to slightly acid pH optimum, reveal this enzyme to be a promising candidate for improvement of the industrial glucose isomerization process (c) 1993 Wiley & Sons, Inc.     

Extra tyrosine in the carbohydrate-binding module of Irpex lacteus Xyn10B enhances its cellulose-binding ability

The xylanase (Xyn10B) that strongly adsorbs on microcrystalline cellulose was isolated from Driselase. The Xyn10B contains a Carbohydrate-binding module family 1 (CBM1) (IrpCBM_Xyn10B) at N-terminus. The canonical essential aromatic residues required for cellulose binding were conserved in IrpCBM_Xyn10B; however, its adsorption ability was markedly higher than that typically observed for the CBM1 of an endoglucanase from Trametes hirsuta (ThCBM_EG1). An analysis of the CBM-GFP fusion proteins revealed that the binding capacity to cellulose (7.8 μmol/g) and distribution coefficient (2.0 L/μmol) of IrpCBM_Xyn10B-GFP were twofold higher than those of ThCBM_EG1-GFP (3.4 μmol/g and 1.2 L/μmol, respectively), used as a reference structure. Besides the canonical aromatic residues (W24-Y50-Y51) of typical CBM1-containing proteins, IrpCBM_Xyn10B had an additional aromatic residue (Y52). The mutation of Y52 to Ser (IrpCBM_Y52S-GFP) reduced these adsorption parameters to 4.4 μmol/g and 1.5 L/μmol, which were similar to those of ThCBM_EG1-GFP. These results indicate that Y52 plays a crucial role in strong cellulose binding.     

Properties of a thermostable 4Fe-ferredoxin from the hyperthermophilic bacterium Thermotoga maritima

Abstract A ferredoxin has been purified from one of the most ancient and the most thermophilic bacteria known, Thermotoga maritima , which grous up to 90°C. The reduced protein ( M _r approx. 6300) contains a single S = 1 2 [4Fe 4S]¹⁺ cluster with complete cysteinyl ligation, and was unaffected after incubation at 95°C for 12 h. It functioned as an electron carrier for T. maritima pyruvate oxidoreductase. Remarkably, the properties and amino acid sequence of this hyperthermophilic bacterial protein are much more similar to those of ferredoxins from hyperthermophilic archaea, rather than ferredoxins from mesophilic and moderately thermophilic bacteria.     

海栖热袍菌葡萄糖异构酶基因xylA的克隆、表达及酶学性质

海栖热袍菌(Thermotoga maritima)是嗜极端高温的厌氧细菌,其产生的葡萄糖异构酶由于其出色的耐热性有着潜在的工业应用价值.由于海栖热袍菌苛刻的培养条件导致其葡萄糖异构酶产量较低.通过PCR方法克隆编码T. maritima MSB8葡萄糖异构酶基因xylA,构建重组质粒pHsh-xylA,转入Escherichia coli JM109,通过热激诱导表达.通过热处理和离子交换层析纯化两步得到电泳纯的酶制品,纯化倍数和回收率分别为8.02和49.02.对酶学性质研究表明,该重组酶为金属离子激活性酶,Mg2 ,Co2 对相对酶活有很强的激活作用,其最适pH为7.0,最适反应温度为95℃,且在pH 6～8之间有着较好的稳定性,在95℃下半衰期长达5 h以上.以葡萄糖为底物时的表观Km和Vmax分别为105 mmol/L和45.2 mol/min·mg.     

Structural and functional analyses of catalytic domain of GH10 xylanase from Thermoanaerobacterium saccharolyticum JW/SL‐YS485

Xylanases are capable of decomposing xylans, the major components in plant cell wall, and releasing the constituent sugars for further applications. Because xylanase is widely used in various manufacturing processes, high specific activity, and thermostability are desirable. Here, the wild‐type and mutant (E146A and E251A) catalytic domain of xylanase from Thermoanaerobacterium saccharolyticum JW/SL‐YS485 (TsXylA) were expressed in Escherichia coli and purified subsequently. The recombinant protein showed optimal temperature and pH of 75°C and 6.5, respectively, and it remained fully active even after heat treatment at 75°C for 1 h. Furthermore, the crystal structures of apo‐form wild‐type TsXylA and the xylobiose‐, xylotriose‐, and xylotetraose‐bound E146A and E251A mutants were solved by X‐ray diffraction to high resolution (1.32–1.66 Å). The protein forms a classic (β/α)₈ folding of typical GH10 xylanases. The ligands in substrate‐binding groove as well as the interactions between sugars and active‐site residues were clearly elucidated by analyzing the complex structures. According to the structural analyses, TsXylA utilizes a double displacement catalytic machinery to carry out the enzymatic reactions. In conclusion, TsXylA is effective under industrially favored conditions, and our findings provide fundamental knowledge which may contribute to further enhancement of the enzyme performance through molecular engineering. Proteins 2013; 81:1256–1265. © 2013 Wiley Periodicals, Inc.     

Structural basis of the properties of an industrially relevant thermophilic xylanase

A thermophilic xylanase from Bacillusstrain D3 suitable for use as a bleach booster in the paper pulping industry has been identified and characterized. The enzyme is suited to the high temperature and alkaline conditions needed for using xylanases in the pulp industry. The xylanase is stable at 60°C and relatively stable at high temperatures, with a temperature optimum of 75°C. The pH optimum is 6, but the enzyme is active over a broad pH range. The xylanase has been cloned and sequenced, and the crystal structure has been determined. The structure of BacillusD3 xylanase reveals an unusual feature of surface aromatic residues, which form clusters or “sticky patches” between pairs of molecules. These “sticky patches” on the surface of the enzyme are responsible for the tendency of the protein to aggregate at high concentrations in the absence of reagents such as ethylene glycol. The formation of dimers and higher order polymers via these hydrophobic contacts may also contribute to the thermostability of this xylanase. Proteins 29:77–86, 1997. © 1997 Wiley-Liss, Inc.     

A highly efficient method for liquid and solid cultivation of the anaerobic hyperthermophilic eubacterium Thermotoga maritima

An efficient and economical medium--Thermotoga maritima basal medium (TMB)--was designed for the cultivation of T. maritima under either liquid or solid conditions. When the broth was flushed with N2 or CO2 throughout cell growth in a 10-L fermentor (pH controlled to 6.5), the maximum cell density (OD600) on TMB containing 1% glucose rose to 2.0 or higher (1.63 x 10(9) cells mL(-1)). Sheath-less cells observed by electron microscopy were captured during growth in the fermentor. Using a two-layer plating method, isolated single-well colonies were consistently obtained within 24 h on the TMB in modified tissue culture flasks. The minimal inhibitory chloramphenicol concentrations for T. maritima on TMB agar were 5 microg mL(-1) after 24 h and 48 h, and 25 microg mL(-1) at 72 h.     

Structural characterization of the putative ABC-type 2 transporter from Thermotoga maritima MSB8

This study describes the structure of the putative ABC-type 2 transporter TM0543 from Thermotoga maritima MSB8 determined at a resolution of 2.3 Å. In comparative sequence-clustering analysis, TM0543 displays similarity to NatAB-like proteins, which are components of the ABC-type Na⁺ efflux pump permease. However, the overall structure fold of the predicted nucleotide-binding domain reveals that it is different from any known structure of ABC-type efflux transporters solved to date. The structure of the putative TM0543 domain also exhibits different dimer architecture and topology of its presumed ATP binding pocket, which may indicate that it does not bind nucleotide at all. Structural analysis of calcium ion binding sites found at the interface between TM0543 dimer subunits suggests that protein may be involved in ion-transporting activity. A detailed analysis of the protein sequence and structure is presented and discussed.     

Functional and structural characterization of a thermostable acetyl esterase from Thermotoga maritima

TM0077 from Thermotoga maritima is a member of the carbohydrate esterase family 7 and is active on a variety of acetylated compounds, including cephalosporin C. TM0077 esterase activity is confined to short‐chain acyl esters (C2–C3), and is optimal around 100°C and pH 7.5. The positional specificity of TM0077 was investigated using 4‐nitrophenyl‐β‐D ‐xylopyranoside monoacetates as substrates in a β‐xylosidase‐coupled assay. TM0077 hydrolyzes acetate at positions 2, 3, and 4 with equal efficiency. No activity was detected on xylan or acetylated xylan, which implies that TM0077 is an acetyl esterase and not an acetyl xylan esterase as currently annotated. Selenomethionine‐substituted and native structures of TM0077 were determined at 2.1 and 2.5 Å resolution, respectively, revealing a classic α/β‐hydrolase fold. TM0077 assembles into a doughnut‐shaped hexamer with small tunnels on either side leading to an inner cavity, which contains the six catalytic centers. Structures of TM0077 with covalently bound phenylmethylsulfonyl fluoride and paraoxon were determined to 2.4 and 2.1 Å, respectively, and confirmed that both inhibitors bind covalently to the catalytic serine (Ser188). Upon binding of inhibitor, the catalytic serine adopts an altered conformation, as observed in other esterase and lipases, and supports a previously proposed catalytic mechanism in which Ser hydroxyl rotation prevents reversal of the reaction and allows access of a water molecule for completion of the reaction. Proteins 2012. © 2012 Wiley Periodicals, Inc.     

ATP-dependent glucokinase from the hyperthermophilic bacterium Thermotoga maritima represents an extremely thermophilic ROK glucokinase with high substrate specificity

The gene (open reading frame (ORF) Tm1469, glk) encoding ATP-dependent ROK (repressors, ORFs, sugar kinases) glucokinase (ATP-GLK, EC 2.7.1.2) of the hyperthermophilic bacterium Thermotoga maritima was cloned and functionally expressed in Escherichia coli. The purified recombinant enzyme is a homodimer with an apparent molecular mass of 80 kDa composed of 36-kDa subunits. Rate dependence (at 80 degrees C) on glucose and ATP followed Michaelis-Menten kinetics with apparent Km values of 1.0 and 0.36 mM, respectively; apparent Vmax values were about 370 U mg(-1). The enzyme was highly specific for glucose as phosphoryl acceptor. Besides glucose only 2-deoxyglucose was phosphorylated to some extent, whereas mannose and fructose were not used. With a temperature optimum of 93 degrees C the enzyme is the most thermoactive bacterial ATP-GLK described.     

Characterization of Paenibacillus curdlanolyticus Intracellular Xylanase Xyn10B Encoded by the xyn10B Gene

The Paenibacillus curdlanolyticus xyn10B gene encoding a family-10 xylanase was cloned and expressed in Escherichia coli, and the recombinant enzyme rXyn10B was characterized. Immunological analysis suggested that Xyn10B is an intracellular enzyme. rXyn10B hydrolyzed birch-wood xylan and xylooligosaccharides to produce mainly xylobiose, suggesting that it is an endoxylanase. Its properties were significantly different from those of some homologous enzymes.     

Nucleotide sequence of the gene coding for the elongation factor Tu from the extremely thermophilic eubacterium Thermotoga maritima

Abstract The gene coding for the elongation factor Tu (EF-Tu) of Thermatoga maritima was cloned and sequenced. The predicted amino acid sequence was compared with those of other eubacteria, an archaebacterium and two eukaryotes as well. The similarity values and the distance matrix tree show that Thermotoga is more closely related to the eubacteria than to the representatives of the other urkingdoms. Thermotoga maritima represents the deepest branching within the tree of EF-Tu sequences from all eubacteria studied so far.