Telomere analysis by fluorescence in situ hybridization and flow cytometry.

Determination of telomere length is traditionally performed by Southern blotting and densitometry, giving a mean telomere restriction fragment (TRF) value for the total cell population studied. Fluorescence in situ hybridization (FISH) of telomere repeats has been used to calculate telomere length, a method called quantitative (Q)-FISH. We here present a quantitative flow cytometric approach, Q-FISHFCM, for evaluation of telomere length distribution in individual cells based on in situ hybridization using a fluorescein-labeled peptide nucleic acid (PNA) (CCCTAA)3probe and DNA staining with propidium iodide. A simple and rapid protocol with results within 30 h was developed giving high reproducibility. One important feature of the protocol was the use of an internal cell line control, giving an automatic compensation for potential differences in the hybridization steps. This protocol was tested successfully on cell lines and clinical samples from bone marrow, blood, lymph nodes and tonsils. A significant correlation was found between Southern blotting and Q-FISHFCMtelomere length values ( P = 0.002). The mean sub-telomeric DNA length of the tested cell lines and clinical samples was estimated to be 3.2 kbp. With the Q-FISHFCMmethod the fluorescence signal could be determined in different cell cycle phases, indicating that in human cells the vast majority of telomeric DNA is replicated early in S phase.     

Improved fluorescent in situ hybridization method for detection of bacteria from activated sludge and river water by using DNA molecular beacons and flow cytometry

Fluorescent in situ hybridization (FISH) remains a key technique in microbial ecology. Molecular beacons (MBs) are self-reporting probes that have potential advantages over linear probes for FISH. MB-FISH strategies have been described using both DNA-based and peptide nucleic acid (PNA)-based approaches. Although recent reports have suggested that PNA MBs are superior, DNA MBs have some advantages, most notably cost. The data presented here demonstrate that DNA MBs are suitable for at least some FISH applications in complex samples, providing superior discriminatory power compared to that of corresponding linear DNA-FISH probes. The use of DNA MBs for flow cytometric detection of Pseudomonas putida resulted in approximately double the signal-to-noise ratio of standard linear DNA probes when using laboratory-grown cultures and yielded improved discrimination of target cells in spiked environmental samples, without a need for separate washing steps. DNA MBs were also effective for the detection and cell sorting of both spiked and indigenous P. putida from activated sludge and river water samples. The use of DNA MB-FISH presents another increase in sensitivity, allowing the detection of bacteria in environmental samples without the expense of PNA MBs or multilaser flow cytometry.     

Quantification of uncultured Ruminococcus obeum-like bacteria in human fecal samples by fluorescent in situ hybridization and flow cytometry using 16S rRNA-targeted probes

A 16S rRNA-targeted probe was designed and validated in order to quantify the number of uncultured Ruminococcus obeum-like bacteria by fluorescent in situ hybridization (FISH). These bacteria have frequently been found in 16S ribosomal DNA clone libraries prepared from bacterial communities in the human intestine. Thirty-two reference strains from the human intestine, including a phylogenetically related strain and strains of some other Ruminococcus species, were used as negative controls and did not hybridize with the new probe. Microscopic and flow cytometric analyses revealed that a group of morphologically similar bacteria in feces did hybridize with this probe. Moreover, it was found that all hybridizing cells also hybridized with a probe specific for the Clostridium coccoides-Eubacterium rectale group, a group that includes the uncultured R. obeum-like bacteria. Quantification of the uncultured R. obeum-like bacteria and the C. coccoides-E. rectale group by flow cytometry and microscopy revealed that these groups comprised approximately 2.5 and 16% of the total community in fecal samples, respectively. The uncultured R. obeum-like bacteria comprise about 16% of the C. coccoides-E. rectale group. These results indicate that the uncultured R. obeum-like bacteria are numerically important in human feces. Statistical analysis revealed no significant difference between the microscopic and flow cytometric counts and the different feces sampling times, while a significant host-specific effect on the counts was observed. Our data demonstrate that the combination of FISH and flow cytometry is a useful approach for studying the ecology of uncultured bacteria in the human gastrointestinal tract.     

High-temperature fluorescent in situ hybridization for detecting Escherichia coli in seawater samples, using rRNA-targeted oligonucleotide probes and flow cytometry

Fluorescence in situ hybridization (FISH) is a widely used method to detect environmental microorganisms. The standard protocol is typically conducted at a temperature of 46 degrees C and a hybridization time of 2 or 3 h, using the fluorescence signal intensity as the sole parameter to evaluate the performance of FISH. This paper reports our results for optimizing the conditions of FISH using rRNA-targeted oligonucleotide probes and flow cytometry and the application of these protocols to the detection of Escherichia coli in seawater spiked with E.coli culture. We obtained two types of optimized protocols for FISH, which showed rapid results with a hybridization time of less than 30 min, with performance equivalent to or better than the standard protocol in terms of the fluorescence signal intensity and the FISH hybridization efficiency (i.e., the percentage of hybridized cells giving satisfactory fluorescence intensity): (i) one-step FISH (hybridization is conducted at 60 to 75 degrees C for 30 min) and (ii) two-step FISH (pretreatment in a 90 degrees C water bath for 5 min and a hybridizing step at 50 to 55 degrees C for 15 to 20 min). We also found that satisfactory fluorescence signal intensity does not necessarily guarantee satisfactory hybridization efficiency and the tightness of the targeted population when analyzed with a flow cytometer. We subsequently successfully applied the optimized protocols to E. coli-spiked seawater samples, i.e., obtained flow cytometric signatures where the E. coli population was well separated from other particles carrying fluorescence from nonspecific binding to probes or from autofluorescence, and had a good recovery rate of the spiked E. coli cells (90%).     

Fluorescent in situ hybridization with rRNA-targeted oligonucleotide probes to identify small phytoplankton by flow cytometry.

Because of their tiny size (0.2 to 2 microns), oceanic picophytoplanktonic cells (either cultured strains or natural communities) are difficult to identify, and some basic questions concerning their taxonomy, physiology, and ecology are still largely unanswered. The present study was designed to test the suitability of in situ hybridization with rRNA fluorescent probes detected by flow cytometry for the identification of small photosynthetic eukaryotes. Oligonucleotide probes targeted against regions of the 18S rRNAs of Chlorophyta lineage (CHLO probe) and of non-Chlorophyta (NCHLO probe) algal species were designed. The CHLO and NCHLO probes, which differed by a single nucleotide, allowed discrimination of chlorophyte from nonchlorophyte cultured strains. The sensitivity of each probe was dependent upon the size of the cells and upon their growth stage. The mean fluorescence was 8 to 80 times higher for specifically labeled than for nonspecifically labeled cells in exponential growth phase, but it decreased sharply in stationary phase. Such taxon-specific probes should increase the applicability of flow cytometry for the rapid identification of cultured pico- and nanoplanktonic strains, especially those that lack taxonomically useful morphological features.     

流式细胞术在细菌快速检测中的应用

流式细胞仪(Flow cytometer)是集应用流体学、光学、电子学、生物学、免疫学等多门学科和技术于一体的新型高科技仪器。它的核心技术是流式细胞术(Flow cytometry,FCM),该技术是利用流式细胞仪,使单个细胞或其他微小生物粒子处于快速直线流动状态,且逐个通过光束,从而对单个细胞或微粒进行多参数(数量、大小、核酸含量、细胞活性、特定菌群或物种等)定量分析和分选的检测技术,具有快速、灵敏、精确以及便于操作等突出优点。本文简要介绍流式细胞仪的原理,并论述流式细胞技术在实验室研究、工业生产、临床诊断、环境评估等领域的细菌快速检测应用。     

In situ hybridization in suspension and flow cytometry as a tool for the study of gene expression.

We describe a method to detect mRNA expression using in situ hybridization in suspension and flow cytometry. Our model was glyceraldehyde-3-phosphate dehydrogenase (GAPDH) gene expression in the leukemic cell line K562. A GAPDH cDNA probe was labeled with digoxigenin-11-dUTP and detected using an FITC-labeled anti-digoxigenin antiserum. We obtained good resolution in specific signals against background (GAPDH signal/control plasmid signal ratio +/- SE 3.5 +/- 0.9). The technique was optimized taking into account several hybridization variables, like fixation, hybridization time, effect of blocking agents, and stringency wash variations. This method also allowed us to quantitate the GAPDH RNA copy number/cell using a fluorescence standard; we obtained a figure of about 1200 copies/cell, which is in good agreement with the dot blot hybridization assay result. Flow cytometric analysis of in situ hybridization represents an original method to study gene expression. This technique has the potential to develop into a multiparametric tool for cell biology studies, examining specific mRNA production together with DNA content or membrane molecules expression, and offering the possibility to purify by sorting a cell population expressing a specific mRNA.     

Fluorescent in situ hybridization en suspension (FISHES) using digoxigenin-labeled probes and flow cytometry.

Fluorescent in situ hybridization has become a major technique for visualizing genetic material in fixed cells. Currently, many systems utilize the hybridization of labeled molecular probes to cells that are attached to slides. We have developed a technique that allows for in situ hybridization to be performed using cells in suspension. By using digoxigenin-labeled DNA probes and a fluoresceinated antibody directed against the digoxigenin, we can measure the resulting signal on a flow cytometer and the cells can be attached to microscope slides for visual analysis.     

PCR-derived ssDNA probes for fluorescent in situ hybridization to HIV-1 RNA.

We developed a simple and rapid technique to synthesize single-stranded DNA (ssDNA) probes for fluorescent in situ hybridization (ISH) to human immunodeficiency virus 1 (HIV-1) RNA. The target HIV-1 regions were amplified by the polymerase chain reaction (PCR) and were simultaneously labeled with dUTP. This product served as template for an optimized asymmetric PCR (one-primer PCR) that incorporated digoxigenin (dig)-labeled dUTP. The input DNA was subsequently digested by uracil DNA glycosylase, leaving intact, single-stranded, digoxigenin-labeled DNA probe. A cocktail of ssDNA probes representing 55% of the HIV-1 genome was hybridized to HIV-1-infected 8E5 T-cells and uninfected H9 T-cells. For comparison, parallel hybridizations were done with a plasmid-derived RNA probe mix covering 85% of the genome and a PCR-derived RNA probe mix covering 63% of the genome. All three probe types produced bright signals, but the best signal-to-noise ratios and the highest sensitivities were obtained with the ssDNA probe. In addition, the ssDNA probe syntheses generated large amounts of probe (0.5 to 1 microg ssDNA probe per synthesis) and were easier to perform than the RNA probe syntheses. These results suggest that ssDNA probes may be preferable to RNA probes for fluorescent ISH. (J Histochem Cytochem 48:285-293, 2000)     

Detection of nitrifying bacteria in activated sludge by fluorescent in situ hybridization and fluorescence spectrometry

16S rRNA-targeted oligonucleotide probes for eubacteria (EUB338), ammonium-oxidizing bacteria (Nsm156) and nitrite-oxidizing bacteria (Nb1000) were used for the rapid detection of nitrifying bacteria in the activated sludge of a pilot nitrifying reactor by whole-cell, fluorescent in situ hybridization (FISH). Emission scanning and synchronous scanning fluorescence spectrometry were used to measure the hybridization. The binding of the probes at a temperature significantly lower than the melting temperature of the hybrids was conventionally considered as non-specific. Total binding of the probes at a temperature significantly higher than the melting temperature of the hybrids was conventionally considered as the sum of non-specific and specific binding (hybridization). Non-specific binding of the oligonucleotide probes with a biomass of activated sludge was 37% of the total binding of the EUB338 probe, 54% of the total binding of the Nsm156 probe, and 69% of the total binding of the Nb1000 probe. The ratio of the specific binding of the Nsm156 and Nb1000 probes was 2.3:1. The ratio of the numbers of ammonium-oxidizing bacteria to nitrite-oxidizing bacteria, determined by microbiological methods, was 2.4:1. Measuring fluorescent in situ hybridization by fluorescence spectrometry appears to be a practical tool for monitoring the microbial communities that contain nitrifying bacteria. However, a method that accounts for the non-specific binding of the probes more easily and reliably should be developed for practical application.     

Mechanistic approach to the problem of hybridization efficiency in fluorescent in situ hybridization

In fluorescent in situ hybridization (FISH), the efficiency of hybridization between the DNA probe and the rRNA has been related to the accessibility of the rRNA when ribosome content and cell permeability are not limiting. Published rRNA accessibility maps show that probe brightness is sensitive to the organism being hybridized and the exact location of the target site and, hence, it is highly unpredictable based on accessibility only. In this study, a model of FISH based on the thermodynamics of nucleic acid hybridization was developed. The model provides a mechanistic approach to calculate the affinity of the probe to the target site, which is defined as the overall Gibbs free energy change (DeltaG degrees overall) for a reaction scheme involving the DNA-rRNA and intramolecular DNA and rRNA interactions that take place during FISH. Probe data sets for the published accessibility maps and experiments targeting localized regions in the 16S rRNA of Escherichia coli were used to demonstrate that DeltaG degrees overall is a strong predictor of hybridization efficiency and superior to conventional estimates based on the dissociation temperature of the DNA/rRNA duplex. The use of the proposed model also allowed the development of mechanistic approaches to increase probe brightness, even in seemingly inaccessible regions of the 16S rRNA. Finally, a threshold DeltaG degrees overall of -13.0 kcal/mol was proposed as a goal in the design of FISH probes to maximize hybridization efficiency without compromising specificity.     

Telomere length measurement by fluorescence in situ hybridization and flow cytometry: tips and pitfalls

BACKGROUND: Telomeres containing noncoding DNA repeats at the end of the chromosomes are essential for chromosomal stability and are implicated in regulating the replication and senescence of cells. The gradual loss of telomere repeats in cells has been linked to aging and tumor development and methods to measure telomere length are of increasing interest. At least three methods for measuring the length of telomere repeats have been described: Southern blot analysis and quantitative fluorescence in situ hybridization using either digital fluorescence microscopy (Q-FISH) or flow cytometry (flow-FISH). Both Southern blot analysis and Q-FISH have specific limitations and are time-consuming, whereas the flow-FISH technique requires relatively few cells (10(5)) and can be completed in a single day. A further advantage of the flow-FISH method is that data on the telomere length from individual cells and subsets of cells (lymphocytes and granulocytes) can be acquired from the same sample. In order to obtain accurate and reproducible results using the flow-FISH technique, we systematically explored the influence of various steps in the protocol on telomere length values and established an acceptable range for the most critical parameters. METHODS: Isolated leukocytes from whole blood are denatured by heat and 70%/75% formamide, then hybridized with or without a telomere-specific fluorescein isothiocyante (FITC)-conjugated peptide nucleic acid probe (PNA). Unbound telomere PNA is washed away, the DNA is counterstained, and telomere fluorescence is measured on a flow cytometer using an argon ion laser (488 nm) to excite FITC. For each sample, duplicates of telomere PNA-stained and unstained tubes are analyzed. RESULTS: Cell counts and flow-FISH telomere length measurements were performed on leukocytes and thymocytes of humans and other species. Leukocyte suspensions were prepared by two red blood cell lysis steps with ammonium chloride. Optimal denaturation of DNA was achieved by heating at 85-87 degrees C for 15 min in a solution containing 70%/75% formamide. Hybridization was performed at room temperature with a 0.3 microg/ml telomere-PNA probe for at least 60-90 min. Unbound telomere-PNA probe was diluted at least 4,000-40,000 times with wash steps containing 70%/75% formamide at room temperature. LDS 751 and DAPI were suitable as DNA counterstains as they did not show significant interference with telomere length measurement. CONCLUSIONS: The use of flow-FISH for telomere length measurements in nucleated blood cells requires tight adherence to an optimized protocol. The method described here can be used to determine rapidly the telomere length in subsets of nucleated blood cells.     

Quantification of fluorescence in situ hybridization signals by image cytometry.

In this study we aimed at the development of a cytometric system for quantification of specific DNA sequences using fluorescence in situ hybridization (ISH) and digital imaging microscopy. The cytochemical and cytometric aspects of a quantitative ISH procedure were investigated, using human peripheral blood lymphocyte interphase nuclei and probes detecting high copy number target sequences as a model system. These chromosome-specific probes were labeled with biotin, digoxigenin, or fluorescein. The instrumentation requirements are evaluated. Quantification of the fluorescence ISH signals was performed using an epi-fluorescence microscope with a multi-wavelength illuminator, equipped with a cooled charge couple device (CCD) camera. The performance of the system was evaluated using fluorescing beads and a homogeneously fluorescing specimen. Specific image analysis programs were developed for the automated segmentation and analysis of the images provided by ISH. Non-uniform background fluorescence of the nuclei introduces problems in the image analysis segmentation procedures. Different procedures were tested. Up to 95% of the hybridization signals could be correctly segmented using digital filtering techniques (min-max filter) to estimate local background intensities. The choice of the objective lens used for the collection of images was found to be extremely important. High magnification objectives with high numerical aperture, which are frequently used for visualization of fluorescence, are not optimal, since they do not have a sufficient depth of field. The system described was used for quantification of ISH signals and allowed accurate measurement of fluorescence spot intensities, as well as of fluorescence ratios obtained with double-labeled probes.     

Gene mapping by fluorescent in situ hybridization

We describe a new method for the mapping of mammalian genes, utilizing in situ hybridization of mRNA to DNA of chromosomes. It involves the hydrogen bonding of the polyadenylic acid at the 3' end of hybridized mRNA to the polyuridylic acid tail of a highly fluorescent latex microsphere. The resultant double hybrid can be visualized by fluorescence microscopy. The chromosomal localization of human alpha + beta globin genes has been explored by this method. Our data point ot the long arms of chromosomes 4 and 5 as the loci for the human globin genes.     

Validation of fluorescent in situ hybridization combined with flow cytometry for assessing interindividual variation in the composition of human fecal microflora during long-term storage of samples

This work was conducted to assess the accuracy of in situ hybridization to show differences in human microflora composition between volunteers and to optimize the storage of fecal samples to allow delayed analysis of gut microflora composition in humans. Fecal samples from 25 healthy subjects (14 women, 11 men aged 24-51) were collected. The samples were fixed in 4% Paraformaldehyde (PFA) solution at 4 degrees C overnight and stored at -70 degrees C. Twenty samples were analysed to quantify the variation due to interindividual differences in the composition of fecal microflora. The five remaining samples were stored either after PFA fixation or directly frozen at -70 degrees C and were monitored on a 12-month period. The fecal microflora was analysed by in situ hybridization combined with flow cytometry detection. Ribosomal RNA-targeted probes were used to assess the relative proportions of four phylogenetic groups: Clostridium coccoides-Eubacterium rectale (Erec 482), Bacteroides (Bac 303), Faecalibacterium prausnitzii (Fprau 645) and Bifidobacterium (Bif 164). Our results demonstrated that the method used is adapted to detect significant differences in fecal microflora composition in humans. Moreover, samples stored in PFA solution demonstrated a stable composition even after 8 months of storage. Conversely, frozen samples were less stable as the Bifidobacterium and C. coccoides-E. rectale groups showed significant differences after 2 months of storage. In conclusion, the fecal microflora composition can be analysed up to 8 months after 4% PFA fixation and storage at -70 degrees C. It represents an extended time compared with the 2-month period currently recommended. This will give more flexibility for applying this technology in epidemiological studies including a large number of samples.     

Characterization of bacteria by multiparameter flow cytometry.

An arc-lamp based flow cytometer was used to obtain high resolution measurements of the light scattering characteristics and DNA contents of eight different bacteria. Light scatter profiles of bacteria are a useful first step when flow cytometry is used to characterize organisms. Scanning and transmission electron microscopy of the bacterial samples demonstrate that the structural basis of the light scattering profiles is not always clear, i.e. some organisms appear to have anomalous light scattering characteristics. The use of a third measurement parameter, DNA content, allowed much better discrimination of the organisms. Flow cytometry shows great promise as a method for the rapid discrimination and identification of bacterial populations.     

Development and use of flow cytometry for detection of airborne fungi

Traditional methods for the enumeration of airborne fungi are slow, tedious, and rather imprecise. In this study, the possibility of using flow cytometry (FCM) for the assessment of exposure to the fungus aerosol was evaluated. Epifluorescence microscopy direct counting was adopted as the standard for comparison. Setting up of the method was achieved with pure suspensions of Aspergillus fumigatus and Penicillium brevicompactum conidia at different concentrations, and then analyses were extended to field samples collected by an impinger device. Detection and quantification of airborne fungi by FCM was obtained combining light scatter and propidium iodide red fluorescence parameters. Since inorganic debris are unstainable with propidium iodide, the biotic component could be recognized, whereas the preanalysis of pure conidia suspensions of some species allowed us to select the area corresponding to the expected fungal population. A close agreement between FCM and epifluorescence microscopy counts was found. Moreover, data processing showed that FCM can be considered more precise and reliable at any of the tested concentrations.     

Enumeration of airborne bacteria and fungi using solid phase cytometry

Conventional methods for the enumeration of airborne micro-organisms are inaccurate and time-consuming, hence the interest in novel approaches is increasing. In the present study, the use of solid phase cytometry (SPC) was evaluated for the enumeration of airborne micro-organisms. A 4 h SPC procedure based on viability staining was applied to samples from 50 locations and compared with an optimised culture-based method. Plate counts after air sampling were repeatable but strongly dependent on sampling volume. Samples with low or high microbial load were difficult to analyse using the culture-based method, unlike with SPC. Results show that SPC can be considered superior to the culture-based method because of its much higher dynamic range, its speed and its ability to enumerate not only culturable but all viable micro-organisms.     

Evaluation of fluorochromes for flow cytometric detection of Cryptosporidium parvum oocysts labelled by fluorescent in situ hybridization

Oligonucleotide probes specific to Cryptosporidium parvum (CRY1) were conjugated with a range of fluorochromes. The fluorescence after in situ hybridization (FISH) labelling of oocysts and controls was assessed. The objective was to determine the most suitable conjugate for FISH labelling, followed by analysis with a 488 nm laser flow cytometer. The most promising candidate was fluorescein isothiocyanate but only when linked to the CRY1 probe via an 18-carbon spacer arm consisting of six ethylene glycol moieties. The use of the spacer increased fluorescent signals fivefold compared with an equivalent probe in which the FITC was linked directly to the 5'-amino group of the DNA.