Conformational analysis of intermediates involved in the in vitro folding pathways of recombinant human macrophage colony stimulating factor beta by sulfhydryl group trapping and hydrogen/deuterium pulsed labeling

In vitro oxidative folding of reduced recombinant human macrophage colony stimulating factor beta (rhm-CSFbeta) involves two major events: disulfide isomerization in the monomeric intermediates and disulfide-mediated dimerization. Kinetic analysis of rhm-CSFbeta folding indicated that monomer isomerization is slower than dimerization and is, in fact, the rate-determining step. A time-dependent determination of the number of free cysteines remaining was made after refolding commence. The folding intermediates revealed that rhm-CSFbeta folds systematically, forming disulfide bonds via multiple pathways. Mass spectrometric evidence indicates that native as well as non-native intrasubunit disulfide bonds form in monomeric intermediates. Initial dimerization is assumed to involve formation of disulfide bonds, Cys 157/159-Cys' 157/159. Among six intrasubunit disulfide bonds, Cys 48-Cys 139 and Cys' 48-Cys' 139 are assumed to be the last to form, while Cys 31-Cys' 31 is the last intersubunit disulfide bond that forms. Conformational properties of the folding intermediates were probed by H/D exchange pulsed labeling, which showed the coexistence of noncompact dimeric and monomeric species at early stages of folding. As renaturation progresses, the noncompact dimer undergoes significant structural rearrangement, forming a native-like dimer while the monomer maintains a noncompact conformation.     

Guanosine 3′-Diphosphate,a Stimulant of Glucocorticoidal Tyrosine Aminotransferase Induction in Isolated Rat Liver Cells

Zein, an associate of two heterogeneous subunits, was fractionated into monomer, dimer and polymer (a mixture of the trimer and higher polymers) fractions. Sulfhydryl group analysis showed that almost all cysteine residues of the dimer and the polymer were involved in formation of intermolecular disulfide bonds. In the monomer, however, intramolecular disulfide bonds existed. To clarify in more detail the state of cysteine residues in the monomer, an experiment was carried out using a Thiopropyl-Sepharose 6B column. The possibility was shown that some of the cysteine residues were blocked or substituted. A model was presented to explain the state of cysteine residues in the monomer.     

Role of an intrachain disulfide bond in the conformation and stability of ovalbumin

Ovalbumin, which contains one intrachain disulfide bond and four cysteine sulfhydryls, was reduced with dithiothreitol under non-denaturing conditions, and its conformation and stability were compared with those of the disulfide-bonded form. The CD spectrum in the far-UV region revealed that the overall conformation of the reduced form is similar to that of the disulfide-bonded one. Likewise, the inaccessibility to trypsin and the non-reactivity of the four cysteine sulfhydryls, exhibited by the native disulfide-bonded ovalbumin, were still retained in the disulfide-reduced form. Thus, the reduced ovalbumin appeared to substantially take the native-like conformation. However, the near-UV CD spectrum slightly differed between the native and disulfide-reduced forms. Protein alkylation with a fluorescent dye and subsequent sequence analysis showed that the two sulfhydryls (Cys73 and Cys120) originating from the disulfide bond are highly reactive in the reduced form. Furthermore, upon proteolysis with subtilisin, the N-terminal side of Cys73 was cleaved in the reduced form, but not in the disulfide-bonded one. Upon heat denaturation, the transition temperature of the reduced form was lower, by 6.8 degrees C, than that of the disulfide-bonded one. Thus, we concluded that ovalbumin has a native-like conformation in its disulfide-reduced form, but that the local conformation of the reduced form fluctuates more than that of the disulfide-bonded one. Such local destabilization may be related to the decreased stability against heat denaturation.     

Conformation and stability of thiol-modified bovine beta-lactoglobulin

Bovine beta-lactoglobulin A assumes a dimeric native conformation at neutral pH, while the conformation at pH 2 is monomeric but still native. Beta-lactoglobulin A has a free thiol at Cys121, which is buried between the beta-barrel and the C-terminal major alpha-helix. This thiol group was specifically reacted with 5,5'-dithiobis(2-nitrobenzoic acid) (DTNB) in the presence of 1.0 M Gdn-HCI at pH 7.5, producing a modified beta-lactoglobulin (TNB-bIg) containing a mixed disulfide bond with 5-thio-2-nitrobenzoic acid (TNB). The conformation and stability of TNB-bIg were studied by circular dichroism (CD), tryptophan fluorescence, analytical ultracentrifugation, and one-dimensional 1H-NMR. The CD spectra of TNB-bIg indicated disordering of the native secondary structure at pH 7.5, whereas a slight increase in the alpha-helical content was observed at pH 2.0. The tryptophan fluorescence of TNB-bIg was significantly quenched compared with that of the intact protein, probably by the energy transfer to TNB. Sedimentation equilibrium analysis indicated that, at neutral pH, TNB-bIg is monomeric while the intact protein is dimeric. In contrast, at pH 2.0, both the intact beta-lactoglobulin and TNB-bIg were monomeric. The unfolding transition of TNB-bIg induced by Gdn-HCl was cooperative in both pH regions, although the degree of cooperativity was less than that of the intact protein. The 1H-NMR spectrum for TNB-bIg at pH 3.0 was native-like, whereas the spectrum at pH 7.5 was similar to that of the unfolded proteins. These results suggest that modification of the buried thiol group destabilizes the rigid hydrophobic core and the dimer interface, producing a monomeric state that is native-like at pH 2.0 but is molten globule-like at pH 7.5. Upon reducing the mixed disulfide of TNB-bIg with dithiothreitol, the intact beta-lactoglobulin was regenerated. TNB-bIg will become a useful model to analyze the conformation and stability of the intermediate of protein folding.     

Complete determination of disulfide bonds localized within the short consensus repeat units of decay accelerating factor (CD55 antigen).

Decay accelerating factor (DAF) has 4 SCR (short consensus repeat) units. Each SCR unit consists of approx. 60 amino acids characterized by having four conserved cysteine residues and several other highly conserved residues which include proline, tryptophan, tyrosine/phenylalanine and glycine. To determine the disulfide-bonding pattern, we used the urine form of DAF. After thermolysin and trypsin digestion, we isolated seven disulfide-linked peptides by HPLC purification. Because all of the cysteine residues are disulfide-bonded, DAF should contain eight disulfide bonds. After subtilisin and trypsin digestion, we isolated the eighth disulfide-bonded peptides by HPLC purification. From sequence analyses of these peptides, we could identify all disulfide bonds in the 4 SCR units of DAF as being between the first and the third and between the second and the fourth half-cystines within each SCR unit.     

Determination of three disulfide bonds and one free sulfhydryl in the beta subunit of (Na,K)-ATPase

The oxidation state of the 7 cyst(e)ine residues of the beta subunit of lamb kidney (Na,K)-ATPase was determined. The fluorescent sulfhydryl-reactive reagent 4-(aminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole was utilized before and after reduction of disulfide bonds to determine the number and location of disulfide bonds present in the beta subunit. Treatment of tryptic peptides of the beta subunit separated by reverse phase high performance liquid chromatography with a reducing agent and 4-(aminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole allowed identification of which residues were disulfide-linked. The results indicated that there is only one free sulfhydryl, Cys44, and that Cys125 is disulfide-bonded to Cys148, Cys158 is disulfide-linked to Cys174, and Cys212 is disulfide-bonded to Cys275. All three disulfide bonds were shown to be reduced in the presence of high concentrations of beta-mercaptoethanol and elevated temperature. These conditions also lead to a loss of (Na,K)-ATPase activity.     

Manipulating monomer-dimer equilibrium of bovine Beta -lactoglobulin by amino acid substitution

Bovine beta-lactoglobulin, a major protein in cow's milk composed of nine beta-strands (betaA-betaI) and one alpha-helix, exists as a dimer at neutral pH while it dissociates to a native monomer below pH 3.0. It is assumed that the intermolecular beta-sheet formed between I-strands and salt bridges at AB-loops play important roles in dimer formation. Several site-directed mutants in which intermolecular interactions stabilizing the dimer would be removed were expressed in the methylotrophic yeast Pichia pastoris, and their monomer-dimer equilibria were studied by analytical ultracentrifugation. Various I-strand mutants showed decreases in K(a), suggesting that the intermolecular beta-sheet is essential for dimer formation. By substituting either Asp(33) or Arg(40) on the AB-loop to oppositely charged residues (i.e. R40D, R40E, and D33R), a large decrease in K(a) was observed probably because of the charge repulsion, which is consistent with the role of electrostatic attraction between Arg(40) on one monomer and Asp(33) on the other monomer in the wild-type dimer. However, when two of these mutants, R40D and D33R, were mixed, a heterodimer was formed by the electrostatic attraction between Arg(33) and Asp(40) of different molecules. These results suggested that protein-protein interactions of bovine beta-lactoglobulin can be manipulated by redesigning the residues on the interface without affecting global folding.     

Development of disulfide peptide mapping and determination of disulfide structure of recombinant human osteoprotegerin chimera produced in Escherichia coli

Recombinant human osteoprotegerin chimera is a 90-kDa protein containing a human IgG Fc domain fused to human osteoprotegerin. The molecule is a dimer linked by two intermolecular disulfide bonds and contains eleven intramolecular disulfide bonds per monomer. A cysteine-rich region in osteoprotegerin contains nine disulfide bridges homologous to the cysteine-rich signature structure of the tumor necrosis factor receptor/nerve growth factor receptor superfamily. In this report, we have developed peptide mapping procedures suitable to generate disulfide-containing peptides for disulfide structure assignment of the fusion molecule. The methods employed included proteolytic digestion using endoproteinases Glu-C and Lys-C in combination followed by LC-MS analyses. Disulfide linkages of peptide fragments containing a single disulfide bond were assigned by sequence analysis via detection of (phenylthiohydantoinyl) cystine and/or by MS analysis. Disulfide bonds of a large, core fragment containing three peptide sequences linked by four disulfides were assigned after generation of smaller disulfide-linked peptides by a secondary thermolysin digestion. Disulfide structures of peptide fragments containing two disulfide bonds were assigned using matrix-assisted laser desorption ionization mass spectrometry with postsource decay. Both the inter- and intramolecular disulfide linkages of the chimeric dimer were confirmed.     

Structural and thermodynamic consequences of removal of a conserved disulfide bond from equine beta-lactoglobulin

A disulfide bond between cysteine 66 and cysteine 160 of equine beta-lactoglobulin was removed by substituting cysteine residues with alanine. This disulfide bond is conserved across the lipocalin family. The conformation and stability of the disulfide-deleted mutant protein was investigated by circular dichroism. The mutant protein assumes a native-like structure under physiological conditions and assumes a helix-rich molten globule structure at acid pH or at moderate concentrations of urea as the wild-type protein does. The urea-induced unfolding experiment shows that the stability of the native conformation was reduced but that of the molten globule intermediate is not significantly changed at pH 4 by removal of the disulfide bond. On the other hand, the molten globule at acid pH was destabilized by removal of the disulfide bond. This difference in the stabilizing effect of the disulfide bond was interpreted by the effect of the disulfide in keeping the molecule compact against the electrostatic repulsion at acid pH. In contrast to the wild-type protein, the circular dichroism spectrum in the molten globule state at acid pH depends on anion concentration, suggesting that the expansion of the molecule through electrostatic repulsion induces alpha-helices as observed in the cold denatured state of the wild-type protein.     

Elucidation of the active conformation of the amino terminus of receptor-bound secretin using intramolecular disulfide bond constraints

Family B G protein-coupled receptors include several potentially important drug targets, yet our understanding of the molecular basis of ligand binding to and activation of these receptors is incomplete. While NMR and crystal structures exist for peptide ligand-associated amino-terminal domains of several family members, these only provide insights into the conformation of the carboxyl-terminal region of the peptides. The amino-terminal region of these peptides, critical for biological activity, is believed to interact with the helical bundle domain, and is, therefore, unconstrained in these structures. The aim of the current study was to provide insights into the conformation of the amino terminus of secretin as bound to its receptor. We prepared a series of conformationally constrained secretin peptides containing intramolecular disulfide bonds that were predicted by molecular modeling to approximate the conformation of the analogous region of PACAP bound to its receptor that had been determined using transfer-NOE NMR techniques. Secretin peptides with pairs of cysteine residues in positions 2–7, 3–5, 3–6, 4–7, 7–9, and 4–10 were studied as linear and disulfide-bonded forms. The analog with a disulfide bond connecting positions 7–9 had binding affinity and biological activity similar to natural secretin, supporting the relevance of this constraint to its active conformation. While this feature is shared between secretin and PACAP, absence of activity in other constrained peptides in this series also suggest that there are differences between these receptor-bound conformations. It will be critical to extend similar studies to other family members to learn what structural elements might be most conserved in this family.     

Revisiting monomeric HIV-1 protease. Characterization and redesign for improved properties

Interactions between the C-terminal interface residues (96-99) of the mature HIV-1 protease were shown to be essential for dimerization, whereas the N-terminal residues () and Arg(87) contribute to dimer stability (Ishima, R., Ghirlando, R., Tozser, J., Gronenborn, A. M., Torchia, D. A., and Louis, J. M. (2001) J. Biol. Chem. 276, 49110-49116). Here we show that the intramonomer interaction between the side chains of Asp(29) and Arg(87) influences dimerization significantly more than the intermonomer interaction between Asp(29) and Arg(8'). Several mutants, including T26A, destablize the dimer, exhibit a monomer fold, and are prone to aggregation. To alleviate this undesirable property, we designed proteins in which the N- and C-terminal regions can be linked intramolecularly by disulfide bonds. In particular, cysteine residues were introduced at positions 2 and 97 or 98. A procedure for the efficient preparation of intrachain-linked polypeptides is presented, and it is demonstrated that the Q2C/L97C variant exhibits a native-like single subunit fold. It is anticipated that monomeric proteases of this kind will aid in the discovery of novel inhibitors aimed at binding to the monomer at the dimerization interface. This extends the target area of current inhibitors, all of which bind across the active site formed by both subunits in the active dimer.     

Chemical synthesis and folding pathways of large cyclic polypeptides: studies of the cystine knot polypeptide kalata B1.

Kalata B1 is a member of a new family of polypeptides, isolated from plants, which have a cystine knot structure embedded within an amide-cyclized backbone. This family of molecules are the largest known cyclic peptides, and thus, the mechanism of synthesis and folding is of great interest. To provide information about both these phenomena, we have synthesized kalata B1 using two distinct strategies. In the first, oxidation of the cysteine residues of a linear precursor peptide to form the correct disulfide bonds results in folding of the three-dimensional structure and preorganization of the termini in close proximity for subsequent cyclization. The second approach involved cyclization prior to oxidation. In the first method, the correctly folded peptide was produced only in the presence of partially hydrophobic solvent conditions. These conditions are presumably required to stabilize the surface-exposed hydrophobic residues. However, in the synthesis involving cyclization prior to oxidation, the cyclic reduced peptide folded to a significant degree in the absence of hydrophobic solvents and even more efficiently in the presence of hydrophobic solvents. Cyclization clearly has a major effect on the folding pathway and facilitates formation of the correctly disulfide-bonded form in aqueous solution. In addition to facilitating folding to a compact stable structure, cyclization has an important effect on biological activity as assessed by hemolytic activity.     

Design of non-cysteine-containing antimicrobial beta-hairpins: structure-activity relationship studies with linear protegrin-1 analogues

Protegrins are short, cationic peptides that display potent, broad-spectrum antimicrobial activity. PG-1, the first of the five natural analogues discovered, forms a rigid antiparallel two-stranded beta-sheet that is stabilized by two disulfide bonds. The two strands of the sheet are linked by a short two-residue loop segment. Removal of the disulfide bridges (e.g., in Cys --> Ala analogues) is known to cause marked loss of antimicrobial activity. We have used basic principles of beta-hairpin design to develop linear analogues of PG-1 that lack cysteine but nevertheless display PG-1-like activity. Our most potent reengineered molecules contain three essential design features: (i) the four cysteine residues of PG-1 are replaced by residues that have high propensity for beta-strand conformation, (ii) D-proline is placed at the i + 1 position of the reverse turn to promote a type II' beta-turn, and (iii) amino functionality is incorporated at the gamma-carbon of the D-proline residue to mimic the charge distribution of the natural beta-hairpin. Structural studies revealed that the antimicrobial potency of the non-disulfide-bonded peptides can be correlated to the stability of the beta-hairpin conformations they adopt in aqueous solution. The presence of 150 mM NaCl was found to have little effect on the antimicrobial activity of PG-1, but one of our linear analogues loses some potency under these high salt conditions. Despite this discrepancy in salt sensitivity, NMR and CD data indicate that neither PG-1 nor our linear analogue experiences a significant decrease in beta-hairpin conformational stability in the presence of 150 mM NaCl. Thus, salt inactivation is not due to destabilization of the beta-hairpin conformation. Furthermore, our results show that beta-sheet design principles can be used to replace conformation-stabilizing disulfide bridges with noncovalent conformation-stabilizing features.     

Conformational stability of dimeric and monomeric forms of the C-terminal domain of human immunodeficiency virus-1 capsid protein

The unfolding equilibrium of the C-terminal domain of human immunodeficiency virus-1 (HIV-1) capsid protein has been analyzed by circular dichroism and fluorescence spectroscopy. The results for the dimeric, natural domain are consistent with a three-state model (N(2)<-->2I<-->2U). The dimer (N(2)) dissociates and partially unfolds in a coupled cooperative process, into a monomeric intermediate (I) of very low conformational stability. This intermediate, which is the only significantly populated form at low (1 microM) protein concentrations, fully preserves the secondary structure but has lost part of the tertiary (intramonomer) interactions found in the dimer. In a second transition, the intermediate cooperatively unfolds into denatured monomer (U). The latter process is the equivalent of a two-state unfolding transition observed for a monomeric domain in which Trp184 at the dimer interface had been truncated to Ala. A highly conserved, disulfide-bonded cysteine, but not the disulfide bond itself, and three conserved residues within the major homology region of the retroviral capsid are important for the conformational stability of the monomer. All these residues are involved also in the association process, despite being located far away from the dimerization interface. It is proposed that dimerization of the C-terminal domain of the HIV-1 capsid protein involves induced-fit recognition, and the conformational reorganization also improves substantially the low intrinsic stability of each monomeric half.     

Sequence of the cysteinyl-containing peptides of 4-aminobutyrate aminotransferase. Identification of sulfhydryl residues involved in intersubunit linkage

Three cysteine-containing tryptic peptides were isolated and sequenced from mitochondrial 4-aminobutyrate aminotransferase using DABIA (4-dimethylaminoazobenzene-4-iodoacetamide) as specific labeling reagent for sulfhydryl groups. The enzyme is a dimer made up of two identical subunits, but four out of the six cysteinyl residues/dimer form disulfide bonds when treated with iodosobenzoate to yield inactive enzyme species. To identify the cysteinyl residues undergoing reversible oxidation/reduction, the S-DABIA-labeling patterns of the fully reduced (active) and fully oxidized (inactive) forms of the enzyme were compared. Tryptic digests of the reduced enzyme contained three labeled peptides. If the enzyme was treated with iodosobenzoate prior to reaction with DABIA and tryptic digestion, only one labeled peptide was detected and identified (peptide I), indicating that the two missing cysteinyl-containing peptides (peptides II, III) have been oxidized. The sulfhydryl groups undergoing oxidation/reduction were found to be intersubunit, based on SDS/polyacrylamide gel electrophoresis results. The loss of catalytic activity of 4-aminobutyrate aminotransferase by oxidation of sulfhydryl residues is related to constraints imposed at the subunit interface by the insertion of disulfide bonds.     

Alpha-lactalbumin forms a compact molten globule in the absence of disulfide bonds.

Human alpha-lactalbumin (alpha-LA) is a four disulfide-bonded protein that adopts partially structured conformations under a variety of mildly denaturing conditions. At low pH, the protein is denatured but compact, with a high degree of secondary structure and a native-like fold. This is commonly referred to as a molten globule. A variant of alpha-LA, in which all eight cysteines have been mutated to alanine (all-Ala alpha-LA), has been studied using NMR spectroscopy. At low pH all-Ala alpha-LA is nearly as compact as wild type alpha-LA. Urea-induced unfolding experiments reveal that the residues that remain compact in the absence of disulfide bonds are those that are most resistant to unfolding in the wild-type alpha-LA molten globule. This is particularly remarkable because this stable core is formed by segments of the polypeptide chain from both the N- and C-termini. These results show that the overall architecture of the protein fold of alpha-LA is determined by the polypeptide sequence itself, and not as the result of cross-linking by disulfide bonds, and provide insight into the way in which the sequence codes for the fold.     

Differences in the unfolding of procerain induced by pH, guanidine hydrochloride, urea, and temperature

The structural and functional aspects along with equilibrium unfolding of procerain, a cysteine protease from Calotropis procera, were studied in solution. The energetic parameters and conformational stability of procerain in different states were also estimated and interpreted. Procerain belongs to the alpha + beta class of proteins. At pH 2.0, procerain exists in a partially unfolded state with characteristics of a molten globule-like state, and the protein is predominantly a beta-sheet conformation and exhibits strong ANS binding. GuHCl and temperature denaturation of procerain in the molten globule-like state is noncooperative, contrary to the cooperativity seen with the native protein, suggesting the presence of two parts in the molecular structure of procerain, possibly domains, with different stability that unfolds in steps. Moreover, tryptophan quenching studies suggested the exposure of aromatic residues to solvent in this state. At lower pH, procerain unfolds to the acid-unfolded state, and a further decrease in the pH drives the protein to the A state. The presence of 0.5 M salt in the solvent composition directs the transition to the A state while bypassing the acid-unfolded state. GuHCl-induced unfolding of procerain at pH 3.0 seen by various methods is cooperative, but the transitions are noncoincidental. Besides, a strong ANS binding to the protein is observed at low concentrations of GuHCl, indicating the presence of an intermediate in the unfolding pathway. On the other hand, even in the presence of urea (8 M), procerain retains all the activity as well as structural parameters at neutral pH. However, the protein is susceptible to unfolding by urea at lower pH, and the transitions are cooperative and coincidental. Further, the properties of the molten globule-like state and the intermediate state are different, but both states have the same conformational stability. This indicates that these intermediates may be located on parallel folding routes of procerain.     

Selective reduction of seminal ribonuclease by glutathione

Incubation of seminal ribonuclease with glutathione leads to the formation of a monomeric species which exhibits twice the specific activity of the native dimer. The monomer was found to possess two mixed disulfides of glutathione at residues 31 and 32, the residues ordinarily involved in the intermolecular disulfide bonds linking the subunits of the native dimer. Formation of the monomer results in only minor changes in the far ultraviolet circular dichroism spectra. The rate of the glutathione-facilitated dissociation reaction is fairly slow, requiring 60 min for completion. Attempts to dimerize the monomer all failed, implying that the dissociation reaction is irreversible. The glutathione reduced monomer was compared with the monomer formed during the regeneration of reduced, denatured bovine seminal ribonuclease in the presence of glutathione. By all criteria examined, the two monomeric forms are identical. It is concluded that the mixed disulfide monomer is the favored form of the enzyme in the presence of glutathione.     

Determination of the disulfide bond pairings in bovine transforming growth factor-alpha

A rapid method for determining the three disulfide bond pairings in bovine transforming growth factor-alpha (bTGF-alpha) was developed by digesting bTGF-alpha with thermolysin followed by separation of the generated peptides by reversed-phase HPLC. The disulfide-bonded peptides were identified by amino acid sequencing and fast atom bombardment mass spectrometry. The disulfide bond pairings in bTGF-alpha were determined to be homologous to those in the human and mouse TGF-alpha molecules. A species of low bioactivity isolated from the folding/oxidation mixture of chemically synthesized bTGF-alpha was demonstrated to contain two incorrect disulfide bonds. These results indicate that mispairing of disulfide bonds in bTGF-alpha significantly reduces the activity of this molecule.     

Domain swapping of CD4 upon dimerization

It has recently been shown that disulfide bond Cys130-Cys159 in domain 2 of monomeric CD4 is involved in the formation of CD4 disulfide-bonded dimers on cell surfaces and that it can influence the permissiveness of cells to HIV infection. Because this disulfide bond is buried in the monomer, a large conformational change must take place in order to allow for such disulfide exchange. Using standard optimization techniques, whose efficiency was first checked in the well-documented CD2 case, we have shown that 3D domain swapping is a likely candidate for the conformational change, the hinge loop, or linker, being loop E-F. Indeed, as a consequence of domain swapping, because Cys130 and Cys159 belong to beta-strands C and F, respectively, two disulfide bonds become established between Cys130 in one monomer and Cys159 in the other one. Such a disulfide exchange has already been observed when the nuclear magnetic resonance (NMR) structure of the prion protein was compared to the crystallographic, dimeric one. In both cases, domain swapping implies disulfide exchange because the linker is located in the sequence between two disulfide-bonded cysteines. As in the CD2 case, the proposed configuration of the CD4 dimer is found as a pair of neighboring monomers in the crystallographic unit cell. Moreover, because in this configuration the epitope of monoclonal antibody MT151, which does not compete with Gp120 for CD4 binding, is in the cleft between the pair of CD4 monomers, it is suggested that MT151 achieves its HIV-blocking activity by interfering with the formation of CD4 domain-swapped dimers on cell surface.