Effect of cationic lipids in the formation of asymmetries in supported bilayers

We have studied the formation of a supported bilayer containing both cationic and zwitterionic lipids by fusion of small unilamellar vesicles (SUV) onto the solid surface at low salt conditions using a combination of attenuated total reflection infrared (ATR-IR) and deuterium NMR spectroscopy with microcalorimetry. The data suggest that a significant cationic lipid asymmetry between the outer (distal) and the inner (proximal) monolayer of a supported bilayer results under conditions of prolonged incubation times of the solid support with the SUV coating solution. For a SUV composition of DPPC/DHDAB (4:1) we observed an enrichment of the cationic component in the proximal monolayer of up to 200% compared to the distal monolayer after 12 h incubation. It is suggested that the electrostatic potential arising from the solid surface is the driving force for the creation of this asymmetry by means of directed flip-flop between the monolayers and/or by temporary fusion between SUV from the bulk with the supported bilayer.     

SNAREs in opposing bilayers interact in a circular array to form conducting pores

The process of fusion at the nerve terminal is mediated via a specialized set of proteins in the synaptic vesicles and the presynaptic membrane. Three soluble N-ethylmaleimide-sensitive factor (NSF)-attachment protein receptors (SNAREs) have been implicated in membrane fusion. The structure and arrangement of these SNAREs associated with lipid bilayers were examined using atomic force microscopy. A bilayer electrophysiological setup allowed for measurements of membrane conductance and capacitance. Here we demonstrate that the interaction of these proteins to form a fusion pore is dependent on the presence of t-SNAREs and v-SNARE in opposing bilayers. Addition of purified recombinant v-SNARE to a t-SNARE-reconstituted lipid membrane increased only the size of the globular t-SNARE oligomer without influencing the electrical properties of the membrane. However when t-SNARE vesicles were added to a v-SNARE membrane, SNAREs assembles in a ring pattern and a stepwise increase in capacitance, and increase in conductance were observed. Thus, t- and v-SNAREs are required to reside in opposing bilayers to allow appropriate t-/v-SNARE interactions leading to membrane fusion.     

Three-dimensional lipophilicity characterization of molecular pores and channel-like cavities

Molecular lipophilicity is a useful property for assessing molecular similarity or complementarity within the context of computer-aided drug design. As well, local contributions to solvent affinity help us to understand both dynamics and conformational stability in biomolecules. In this work, we discuss an approach to characterize the local contributions to hydrophobicity by using one- and two-dimensional representations of molecular channel-like cavities. The method monitors how a phenomenological lipophilicity potential (based on fragmental atom contributions) changes over a continuum of “molecular tubes” used for modeling channels and pores. Our results convey a relatively detailed picture of the spatial distribution of water affinity. The procedure can then be used as a complement to the hydrophobicity scales based on averaging contributions from single amino acids. In addition, we can study how the water affinity changes for inner and outer regious of the pores. As an application, we compute the 3D distribution of lipophilicity in the “pore conformation” of gramicidin A. The qualitative trends indicated by our results are broadly consistent with computer simulations of the gramicidin channel in the presence of hydrated ions. The behavior revealed by the simulations can then be incorporated to produce an improved, simple 2D model for water-channel interactions.     

Pure lipid vesicles can induce channel-like conductances in planar bilayers

Summary Typical channel-like current fluctuations were observed in planar lipid bilayers following brief exposure to large concentrations of lipid vesiclesdevoid of protein. Vesicles, formed by sonication of pure lipids suspended in 150mm salt solutions, were ejected 0.5 mm from a planar bilayer with a pipette. Over the next several minutes the bilayer conductance changed in ways usually considered to be indicative of reconstituted protein channels including step conductance changes (both up and down), flickering, ion selectivity, and inactivation. This observation demonstrates the need for caution in interpreting conductance changes which occur following ejection of channel-containing vesicles near a membrane.     

Supported phospholipid bilayers.

Phospholipid bilayers have been formed on glass, quartz, and silicon surfaces by a sequential transfer of two monolayers at a pressure of approximately 40 dyn/cm from the air-water interface to the solid substrates. Lateral diffusion measurements of L-alpha-dipalmitoylphosphatidylcholine (DPPC) bilayers supported on oxidized silicon wafers reveal two sharp phase transitions at temperatures similar to those found in multilayer systems with several different techniques. The diffusion measurements obtained using fluorescence recovery after pattern photobleaching provide evidence for the existence of an intermediate (probably P beta' or ripple) phase in single bilayers. While in the intermediate and high temperature (liquid-crystalline L alpha) phase, the diffusion coefficients do not vary very much with temperature, a strong temperature dependence is observed in the low temperature (gel L beta') phase. This is attributed to defect-mediated diffusion. Lipids in silicon supported bilayers made from L-alpha-dioleoylphosphatidylcholine (DOPC) or L-alpha-dimyristoylphosphatidylcholine (DMPC) diffuse rapidly above their respective chain-melting transition temperatures. Arrhenius plots show straight lines with activation energies of 40.9 and 43.7 kJ/mol, respectively. Supported DPPC bilayers on oxidized silicon form long tubular liposomes when heated through their oxidized silicon form long tubular liposomes when heated through their chain-melting-phase transition, as viewed with epifluorescence microscopy. It is suggested that this is a consequence of the expansion of the lipid on the fixed solid support. Conversely, DOPC bilayers form large void areas on this substrate upon cooling. Large circular membrane defects (holes) are observed under rapid coating conditions.(ABSTRACT TRUNCATED AT 250 WORDS)     

A polyalanine-based peptide cannot form a stable transmembrane alpha-helix in fully hydrated phospholipid bilayers

The conformation and amide proton exchangeability of the peptide acetyl-K(2)-A(24)-K(2)-amide (A(24)) and its interaction with phosphatidylcholine bilayers were examined by a variety of physical techniques. When dissolved in or cast from methanol as a dried film, A(24) is predominantly alpha-helical. In aqueous media, however, A(24) exists primarily as a mixture of helical (though not necessarily alpha-helical) and random coiled structures, both of which allow rapid H-D exchange of all amide protons. When incorporated into phospholipids in the absence of water, A(24) also exists primarily as a transmembrane alpha-helix. However, upon hydration of that system, rapid exchange of all amide protons also occurs along with a marked change in the amide I absorption band of the peptide. Also, when dispersed with phosphatidylcholine in aqueous media, the conformation and thermal stability of A(24) are not significantly altered by the presence of the phospholipid or by its gel/liquid-crystalline phase transition. Differential scanning calorimetric and electron spin resonance spectroscopic studies indicate that A(24) has relatively minor effects on the thermodynamic properties of the lipid hydrocarbon chain-melting phase transition, that it does not abolish the lipid pretransition, and that its presence has no significant effect on the orientational order or rates of motion of the phospholipid hydrocarbon chains. We therefore conclude that A(24) has sufficient alpha-helical propensity, but insufficient hydrophobicity, to maintain a stable transmembrane association with phospholipid bilayers in the presence of water. Instead, it exists primarily as a dynamic mixture of helices and other conformers and resides mostly in the aqueous phase where it interacts weakly with the bilayer surface or with the polar/apolar interfacial region of phosphatidylcholine bilayers. Thus, polyalanine-based peptides are not good models for the transmembrane alpha-helical segments of natural membrane proteins.     

UV immobilized phospholipid bilayers

Dinitrophenyl phosphotidylethanolamine-containing bilayers have been immobilized on carbon-shadowed support films by UV irradiation of the first monolayer transferred to the support film. The immobilized bilayer is capable of allowing bound protein (anti-DNP antibody) to organize into 2-D arrays in the presence of organic solvents such as acetonitrile and dilute concentrations of detergents such as beta-octyl glucoside. The ability of the bilayers to remain attached to supports under various conditions that include organic solvents and detergents as well as divalent ions is of potential interest in the study of protein crystallization and particularly in the study of membrane proteins.     

Interaction of alamethicin pores in DMPC bilayers

We have investigated the x-ray scattering signal of highly aligned multilayers of the zwitterionic lipid 1,2-dimyristoyl-sn-glycero-3-phosphatidylcholine containing pores formed by the antimicrobial peptide alamethicin as a function of the peptide/lipid ratio. We are able to obtain information on the structure factor of the pore fluid, which then yields the interaction potential between pores in the plane of the bilayers. Aside from a hard core with a radius corresponding to the geometric radius of the pore, we find a repulsive lipid-mediated interaction with a range of approximately 30 A and a contact value of 2.4 k(B)T. This result is in qualitative agreement with recent theoretical models.     

Ion channel-like activity of the antimicrobial peptide tritrpticin in planar lipid bilayers

The cationic peptide tritrpticin (VRRFPWWWPFLRR, Trp3) has a broad action spectrum, acting against Gram-positive and Gram-negative bacteria, as well as some fungi, while also displaying hemolytic activity. We have studied the behavior of Trp3 in planar lipid bilayers (or black lipid membrane - BLM) and were able to demonstrate its ion channel-like activity. Channel-like activity was observed in negatively charged azolectin BLM as a sudden appearance of discrete current fluctuations upon application of a constant voltage across the membrane. Trp3 formed large conductance channels (500-2000 pS) both at positive and negative potentials. In azolectin bilayers, the predominant ion-channel activity was characterized by very regular and discrete current steps (corresponding to openings) of uniform amplitude, which exhibited relatively long residence times (of the order of seconds). Occasionally, multiple conductance steps were observed, indicating the simultaneous presence of more than one open pore. In bilayers of zwitterionic diphytanoylphosphatidyl choline (DPhPC) Trp3 also showed ion-channel activity, but in a much less frequent and less prominent way. Studies of ion selectivity indicated that Trp3 forms a cation-selective channel. These results should contribute to the understanding of the molecular interactions and mechanism of action of Trp3 in lipid bilayers and biological membranes.     

Depolarization of dehydroergosterol in phospholipid bilayers

The behavior in phospholipid bilayers of low concentrations of dehydroergosterol, a fluorescent cholesterol mimic, has been examined by fluorometry and calorimetry. In contrast to many fluorescent membrane probes, dehydroergosterol shows a decrease in fluorescence anisotropy when the matrix phospholipid goes from the liquid-crystalline to the gel state. This was observed in three systems in which the matrix lipid was either dipalmitoyl- or dimyristoylphosphatidylcholine or dilauroylphosphatidylethanolamine. The decrease in anisotropy is the result of a large increase in the fluorescence life time of dehydroergosterol in these bilayer systems which is probably the result of thermal quenching of dehydroergosterol by neighboring molecules. The rotation of dehydroergosterol in these bilayers can be described in terms of the thermal coefficient of frictional resistance offered by the environment (Weber et al. (1984) Biochemistry 23, 6785-6788). The thermal coefficients are observed to change abruptly at the onset and completion temperatures of the gel to liquid-crystalline phase transition temperatures of the three matrix phospholipids. These changes are, however, much smaller than are the corresponding changes in the thermal coefficient observed for the fluorescent probe diphenylhexatriene in dilauroylphosphatidylethanolamine bilayers. The difference in behavior of the two fluorescent probes may be the result of lateral phase separation of dehydroergosterol similar to that reported for cholesterol in similar systems.     

Clostridium perfringens type A enterotoxin forms mepacrine-sensitive pores in pure phospholipid bilayers in the absence of putative receptor proteins

Clostridium perfringens enterotoxin (CPE) is an important cause of food poisoning with no significant homology to other enterotoxins and its mechanism of action remains uncertain. Although CPE has recently been shown to complex with tight junction proteins, we have previously demonstrated that CPE increases ionic permeability in single Caco-2 cells using the whole-cell patch-clamp technique, thereby excluding any paracellular permeability. In this paper we demonstrate that CPE forms pores in synthetic phospholipid membranes in the absence of receptor proteins. The properties of the pores are consistent with CPE-induced permeability changes in Caco-2 cells suggesting that CPE has innate pore-forming ability.     

Three-dimensional structure of Bax-mediated pores in membrane bilayers

B-cell lymphoma 2 (Bcl-2)-associated X protein (Bax) is a member of the Bcl-2 protein family having a pivotal role in triggering cell commitment to apoptosis. Bax is latent and monomeric in the cytosol but transforms into its lethal, mitochondria-embedded oligomeric form in response to cell stress, leading to the release of apoptogenic factors such as cytochrome C. Here, we dissected the structural correlates of Bax membrane insertion while oligomerization is halted. This strategy was enabled through the use of nanometer-scale phospholipid bilayer islands (nanodiscs) the size of which restricts the reconstituted system to single Bax-molecule activity. Using this minimal reconstituted system, we captured structural correlates that precede Bax homo-oligomerization elucidating previously inaccessible steps of the core molecular mechanism by which Bcl-2 family proteins regulate membrane permeabilization. We observe that, in the presence of BH3 interacting domain death agonist (Bid) BH3 peptide, Bax monomers induce the formation of ∼3.5-nm diameter pores and significantly distort the phospholipid bilayer. These pores are compatible with promoting release of ions as well as proteinaceous components, suggesting that membrane-integrated Bax monomers in the presence of Bid BH3 peptides are key functional units for the activation of the cell demolition machinery.     

Induction of transient ion channel-like pores in a cancer cell by antibiotic peptide

The anticancer activity of anti-bacterial cecropins makes them potentially useful as peptide anti-cancer drugs. We used the cell-attached patch to study the effect of cecropin B (CB; having one hydrophobic and one amphipathic alpha-helix) and its derivative, cecropin B3 (CB3; having two hydrophobic alpha-helices) on the membrane of Ags cancer cells. Application of 10-60 microM CB onto the membrane of the cancer cell produces short outward currents. Comparative study with CB3, which induces no outward currents, shows that the amphipathic group of CB is necessary for the pore formation. The results provide a rationale to study the cell-killing activity of antimicrobial peptides at the single cancer cell level.     

Bacterial lipopeptides induce ion-conducting pores in planar bilayers

Bacterial lipopeptides, known for their antibiotic activities, have been tested for their ability to interact with lipid membranes. These lipopeptides, Iturin A, Bacillomycin L and D and Peptidolipin NA present analogous structural characteristics: a heptapeptidic cycle is linked to a hydrocarbon chain. We present evidence that these lipopeptides modify the conductance of planar bilayers by forming ion-conducting pores.     

Silica-based cationic bilayers as immunoadjuvants

Background  

Silica particles cationized by dioctadecyldimethylammonium bromide (DODAB) bilayer were previously described. This work shows the efficiency of these particulates for antigen adsorption and presentation to the immune system and proves the concept that silica-based cationic bilayers exhibit better performance than alum regarding colloid stability and cellular immune responses for vaccine design.     

Clustering of fatty acids in phospholipid bilayers

From electrophoresis experiments it is concluded that acidic phospholipids incorporated in liquid crystalline phosphatidylcholine bilayers at neutral pH are randomly distributed. The same is true for spin-labelled fatty acids. In contrast, long chain fatty acids are not fully ionized at neutral pH and appear to be clustered, i.e. they segregate out into patches. Only at $\text{pH}\text{>11}$ is the fatty acid-COOH group fully ionized and charge repulsion leads to a random distribution of the fatty acid within the plane of the bilayer.     

Capacitance--voltage relationship in phospholipid bilayers containing gangliosides

Changes in the position of the minimum of the parabolic capacitance-voltage curve allow the measurement of the amount of ganglioside present in artificial bilayers made with phosphatidylcholine-ganglioside mixtures and asymmetrically shielded with Ca2+. The screening effect of the ionic solution must be considered. With ganglioside/phospholipid molar ratios of up to 15%, all glycolipids can be found at the membrane surfaces.