Cis- and trans-titanium complexes with doubly silyl-bridged dicyclopentadienyl ligands: molecular structure of [(TiCl)2(μ-O){(SiMe2)2(η-C5H3)2}]2(μ-O)2

The reaction of TiCl₄ with Li₂[(SiMe₂)₂(η⁵-C₅H₃)₂] in toluene at room temperature afforded a mixture of cis- and trans-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] in a molar ratio of 1/2 after recrystallization. The complex trans-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] was hydrolyzed immediately by the addition of water to THF solutions to give trans-[(TiCl₂)₂(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}] as a solid insoluble in all organic solvents, whereas hydrolysis of cis-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] under different conditions led to the dinuclear μ-oxo complex cis-[(TiCl₂)₂)(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}] and two oxo complexes of the same stoichiometry [(TiCl)₂(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}]₂(μ-O)₂ as crystalline solids. Alkylation of cis- and trans-[(TiCl₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] with MgCIMe led respectively to the partially alkylated cis-[(TiMe₂Cl)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] and the totally alkylated trans-[(TiMe₃)₂{(SiMe₂)₂(η⁵-C₅H₃)₂}] compounds. The crystal and molecular structure of the tetranuclear oxo complex [(TiCl)₂(μ-O){(SiMe₂)₂(η⁵-C₅H₃)₂}]₂(μ-O)₂ was determined by X-ray diffraction.     

Transition metal complexes of 2-amino-3,5-dihalopyridines: Synthesis, structures and magnetic properties of Cu(3,5-diCAP)2X2 and Cu(3,5-diBAP)2X2

A family of bis(2-amino-3,5-dihalopyridine)dihalocopper(II) compounds has been synthesized, including (3,5-diCAP)₂CuCl₂ (1), (3,5-diCAP)₂CuBr₂ (2), (3,5-diBAP)₂CuCl₂ (3), and (3,5-diBAP)₂CuBr₂ (4) [3,5-diCAP = 2-amino-3,5-dichloropyridine; 3,5-diBAP = 2-amino-3,5-dibromopyridine]. These complexes have been analyzed through single crystal X-ray diffraction and temperature dependant magnetic susceptibility. The compounds are all isostructural, forming bi-bridged chains with long Cu-X?Cu bridges in the crystal lattice. The two copper chloride compounds (1 and 3) exhibit weak antiferromagnetic interactions along these chains.     

CO substitution and diphosphine ligand chelation in the reaction between 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) and Re(2(CO)8(μ-H)(μ-η,η-C CPh)

The reaction between the redox-active diphosphine ligand 4,5-bis(diphenylphosphino)-4-cyclopenten-1,3-dione (bpcd) and the dirhenium compound Re₂(CO)₈(μ-H)(μ-η¹,η²-C CPh) in CH₂Cl₂ at room temperature proceeds by CO loss to give the dirhenium complex Re₂(CO)₇(bpcd)(μ-H)(η¹-C CPh) (1). This new complex was characterized in solution by IR and NMR (¹H and ³¹P) spectroscopy and in the solid state by X-ray diffraction analysis. Re₂(CO)₇(bpcd)(μ-H)(η¹-C CPh) crystallizes in the triclinic space group

Full-size image

γ = 69.240(6)°, V = 2024.9(3) ų, Z = 2, d_calc = 1.862 g cm⁻³ R = 0.0221, R_w = 0.243 for 4066 observed reflections. The bpcd ligand in 1 adopts a chelating mode with a linear phenylacetylide ligand being located on the adjacent rhenium center cis to the bpcd ligand. This complex represents the first structurally characterized example of a hydrido-bridged dirhenium complex possessing both a linear acetylide ligand and a chelating diphosphine ligand.     

Synthesis and structure of [{C7F15CO2}2AgAu(PPh3)]2 and its use in electrodeposition of gold-silver alloys

[{C₇F₁₅CO₂}₂AgAu(PPh₃)]₂ is obtained in good yield from the reaction of [C₇F₁₅CO₂Ag] with [ClAuPPh₃] in THF solution. The crystal structure shows a zig-zag Au-Ag-Ag-Au core with fluorocarboxylate ligands bridging the Au-Ag and Ag-Ag bonds and triphenylphosphine groups bound to Au. Electrodeposition from acetonitrile yields Au-Ag alloys. The deposited alloys are Ag rich and the composition varies with deposition potential.     

Ligand connected metal clusters. The molecular structures and solid state packing of {Ru3(CO)11}2(bis(diphenylphosphino)ethane) and {Ru3(CO)11}2(1,4-bis(diphenylphosphino)benzene)

The preparation and structural characterization of {Ru₃(CO)₁₁}₂(1,4-bis(diphenylphosphino)benzene), a modified synthesis of 1,4-bis(diphenylphosphino)benzene, and the structural characterization of {Ru₃(CO)₁₁}₂(bis(diphenylphosphino)ethane) are reported. In both compounds two metal cluster units are connected through ditertiary-phosphine ligands. Both molecules consist of centrosymmetric units in which the diphosphine ligands are largely covered by the triangular ruthenium clusters. No direct interaction between the two cluster units occurs within individual molecules. Molecular packing in the solid state is dominated by interactions between sets of carbon monoxide ligands in motifs that were previously identified in the solid state structure of the parent cluster, Ru₃(CO)₁₂.     

From the {Cu(μ2-S)N}4 butterfly architecture to the {Cu(μ3-S)N}12 double wheel

Copper(I) complexes with {Cu(μ₂-S)N}₄ and {Cu(μ₃-S)N}₁₂ core portions of butterfly-shaped or double wheel architectures have been isolated in the reaction of Cu(I) with the Schiff base ligand C₆H₄(CHNC₆H₄S)₂, “iso-abt”, under different conditions. containing the tetranuclear electroneutral complex is formed by the reaction of CuI in acetonitrilic solution and recrystallization from DMF, whereas containing dodecanuclear wheels is accessible starting from CuBF₄. Complexes 2 and 4 represent the first examples of cyclic complexes with the same overall stoichiometry but different ring sizes. The ligand induces two different coordination environments around copper(I) by switching between μ₂- and μ₃-sulfur bridging modes.     

Conformational flexibility of 2,6-bis(pyrazol-1-ylmethyl)pyridine (L) in [(L)Co(H2O)3]Cl2 and [(L)Ni(H2O)2Cl]Cl·H2O. Molecular structures and non-covalent interactions

Using a non-planar tridentate ligand 2,6-bis(pyrazol-1-ylmethyl)pyridine (L⁵) two new coordination complexes [(L⁵)Co^II(H₂O)₃]Cl₂ (1) and [(L⁵)Ni^II(H₂O)₂Cl]Cl·H₂O (2) have been synthesized and structurally characterized. Complex 1 has N₃O₃ distorted octahedral environment around Co^II with coordination by L⁵ (two pyrazole and a pyridine nitrogen in a facial mode) and three water molecules. Complex 2 has N₃O₂Cl distorted octahedral geometry around Ni^II with meridional L⁵ coordination, two water molecules, and a Cl⁻ ion. Analysis of the crystal packing diagram reveals the involvement of solvent (water as metal-coordinated and as solvent of crystallization) and counteranion (Cl⁻) to play significant roles in generating 1D chains, involving O-H···Cl, and O-H···O interactions.     

Chiroptical properties of heterotrimetallic ‘wing-tip’ butterflies; synthesis and crystal structure of (μ-H)Ru2Fe2PdC(CO)12 (η-ß-C10H15)

HRu₂Fe₂PdC(CO)₁₂ (η³-ß-C₁₀H₁₅) cluster was prepared in the reaction of (Et₄N) [HFe₂Ru₂C(CO)₁₂] with [Pd(η³-ß-C₁₀H₁₅)Cl]₂. X-ray structural study of HRu₂Fe₂PdC(CO)₁₂ (η³-ß-C₁₀H₁₅) (where ß-C₁₀H₁₅ is ß-pinenyl) revealed a wing-tip butterfly geometry of the metal core and (1R, 2S, 3S, 5R) absolute configuration for both crystallography independent molecules in the crystal. Chiroptical properties of this cluster are compared with other clusters containing a Pd(η³-ß-C₁₀H₁₅) fragment and discussed.     

Synthesis and properties of the dichloro [tetramethyl (trifluoromethyl)cyclopentadienyl]ruthenium dimer: X-ray structure of [M2(η-C5Me4CF3)2Cl2(μ-Cl)2] (M=Ru, Rh)

The reaction of RuCl₃(H₂O), with C₅Me₄CF₃J in refluxing EtOH gives [Ru₂(η⁵-C₅Me₁CF₂)₂ (μ-Cl₂] (20 in 44% yield. Dimer 2 antiferromagnetic (−2J=200 cm¹). The crystal structures of 2 (rhombohedral system, R3 space group, Z=9, R=0.0589) and [Rh₂(η⁵-C₅Me₄CF₃(₂Cl₂(μ-Cl)₂] (3) (rhombohedral system. space group, Z = 9, R = 0.0641) were solved; both complexes have dimeric structures with a trans arrangement of the η⁵-C₅Me₄CF₄ rings. Comparison of the geometry of 2 and 3 with those of the corresponding η⁵-C₅Me₅ complexes shows that lowering the ring symmetry causes significant distortion of the M₂(μ-Cl)₂ moiety. The analysis of the MCl₃ fragment conformations in 2 and 3 and in the η⁵-C₅ME₅ analogues shows that they are correlated with the M---M distances. The Cl atoms are displaced by Br on reaction of 2 with KBr in MeOH to give the diamagnetic dimer [Ru₂(η⁵-C₅Me₄CF₃)₂Br₂ (μ-Br₂] (4). Complex 2 reacts with O₂ in CH₂Cl₂ solution at ambient temperature to form a mixture of isomeric η⁶-fulvene dimers [Ru₂(η⁶-C₅Me₃CF₃ = CH₂)₂Cl₂(μ-Cl)₂] (5). Reactions of 5 with CO and allyl chloride give Ru(η⁵-C₅Me₃CF₃CH₂Cl)(CO)₂Cl (6) and Ru(η⁵-C₅Me₃CF₃CF₃CH₂Cl)(η³-C₃H₅)Cl₂ (7) respectively.     

Hetero-polynuclear complexes containing bridging diphenylphosphino-alkenes and -alkynes. The crystal structure of an Rh2{μ−ν:ν−P(Ph2) (CH2)3C≡CR}Co2 complex

The phosphinoalkenes Ph₂P(CH₂)_nCH=CH₂ (n= 1, 2, 3) and phosphinoalkynes Ph₂P(CH₂)_n C≡CR (R = H, N = 2, 3; R = CH₃, N = 1) have been prepared and reacted with the dirhodium complex (η−C₅H₅)₂Rh₂(μ−CO) (μ−η²−CF₃C₂CF₃). Six new complexes of the type (ν−C₅H₅)₂(Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃)L, where L is a P-coordinated phosphinoalkene, or phosphinoalkyne have been isolated and fully characterized; the carbonyl and phosphine ligands are predominantly trans on the Rh---Rh bond, but there is spectroscopic evidence that a small amount of the cis-isomer is formed also. Treatment of the dirhodium-phosphinoalkene complexes with (η−CH₃C₅H₄)Mn(CO)₂thf resulted in coordination of the manganese to the alkene function. The Rh₂---Mn complex [(η−C₅H₅)₂Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃) {Ph₂P(CH₂)₃CH=CH₂} (η−CH₃C₅H₄)Mn(CO)₂] was fully characterized. Simi treatment of the dirhodium-phosphinoalkyne complexes with Co₂(CO)₈ resulted in the coordination of Co₂(CO)₆ to the alkyne function. The Rh₂---Co₂ complex [(η−C₅H₅)₂Rh₂(CO) (μ−η¹:η¹−CF₃C₂CF₃) {Ph₂PCH₂C≡CCH₃}Co₂(CO)₂], C₃₇H₂₅Co₂F₆O₇PRh₂, was fully characteriz spectroscopically, and the molecular structure of this complex was determined by a single crystal X-ray diffraction study. It is triclinic, space group (C_i¹, No. 2) with a = 18.454(6), B = 11.418(3), C = 10.124(3) Å, = 112.16(2), β = 102.34(3), γ = 91.62(3)°, Z = 2. Conventional R on |F| was 0.052 fo observed (I > 3σ(I)) reflections. The Rh₂ and Co₂ parts of the molecule are distinct, the carbonyl and phosphine are mutually trans on the Rh---Rh bond, and the orientations of the alkynes are parallel for Rh₂ and perpendicular for Co₂. Attempts to induce Rh₂Co₂ cluster formation were unsuccessful.     

A novel ferromagnetic coupling one-dimensional complex {Cu(II)(NIT3Py)2[N(CN)2]2(H2O)2}

The novel ferromagnetic coupling one-dimensional complex {Cu(NIT3Py)₂[N(CN)₂]₂(H₂O)₂} (NIT3Py=2-(3^′-pyridyl)-4,4,5,5-tetramethylimidazoline-1-oxyl-3-oxide) was synthesized and characterized structurally and magnetically. It crystallizes in the monoclinic space group C2/c. The Cu(II) ion is in a distorted octahedral environment. The units of {Cu(NIT3Py)₂[N(CN)₂]₂(H₂O)₂} were connected as one-dimensional structure by the intermolecular hydrogen bonds. Magnetic measurements show that there are intramolecular ferromagnetic interactions and intermolecular antiferromagnetic interactions within the chain.     

Synthesis and crystal structure of the low-spin iron(II) complex [Fe(bpz)3](ClO4)2 · H2O (bpz=2,2-bipyrazine)

The crystal structure of the title compound [Fe(bpz)₃](ClO₄)₂ · H₂O (bpz=2,2^′-bipyrazine) has been determined by a single crystal X-ray diffraction study at 293(2) K. The complex is monoclinic, P2₁/c, a=17.263(3), b=9.983(2), c=17.921(4) Å, β=107.94(3)°, V=2938.3(10) ų, Z=4, R=0.073 and R_w=0.118. The structure is made up of tris-chelated [Fe(bpz)₃]²⁺ cations, uncoordinated perchlorate anions and crystallization water molecules. The iron atom exhibits a FeN₆ distorted octahedral geometry with average Fe-N bond length and N-Fe-N bidentate angle of 1.962(5) Å and 81.6(2)°. The value of the Fe-N bond distance and that of the room temperature magnetic moment are in agreement with a singlet ¹A₁ ground state. The structure of 1 is compared to those of other tris-chelated iron(II) complexes with bidentate nitrogen heterocycles.     

Mixed-metal butterfly acetamidediato clusters derived from a highly reactive ruthenium oxo cluster: synthesis and characterization of [(PPh3)2N][MRu3(CO)12(η-μ3-NC(μ-O)CH3)], (M = Mn or Re)

Analogy with the isolable oxo cluster [Fe₃(CO)₉(μ₃-O)]²⁻, which is structurally interesting and synthetically useful, prompted the present attempt to synthesize its ruthenium analog. Although the high reactivity of [Ru₃(CO)₉(μ₃-O)]²⁻ (I) prevented its isolation, the reaction of this species with [M(CO)₃(NCCH₃)]⁺, where M = Mn or Re, yields [PPN][MRu₃(CO)₁₂(η²-μ₃-NC(μ-O)CH₃]⁻. The high nucleophilicity of the oxo ligand in [Ru₃(CO)₉(μ₃-O)]²⁻ (I) appears to be responsible for the conversion of acetonitrile to an acetamidediato ligand and for the instability of I. The crystal structure of [PPN][MnRu₃(CO)₁₂(η²-μ₃-NC(μ-O)CH₃)]] reveals a hinged butterfly array of metal atoms in which the acetamidediato ligand bridges the two wings with μ₃-N bonding to an Mn and two Ru atoms, and μ-O bonding to an Ru atom.     

Cd(II)-NCS/NCO complexes of 1-alkyl-2-(arylazo)imidazole: Single crystal X-ray structure of [Cd(HaaiMe)2(SCN)2]

The reaction of Cd(OAc)₂ · 4H₂O and 1-alkyl-2-(arylazo)imidazole [RaaiR′ where R = H (a), Me (b); R′ = Me (1/3/5), Et (2/4/6)] and NH₄NCS/NaNCO in methanol in 1:2:2 mole ratio has afforded [Cd(RaaiR′)₂(NCS)₂] (3, 4) and [Cd(RaaiR′)₂(NCO)₂] (5, 6) complexes. The complexes are characterized by different physicochemical methods and in one case, the structure was confirmed by single crystal X-ray diffraction study for title compounds.     

Synthesis and structure of a lead(II)-citrate: {Na(H2O)3}[Pb5(C6H5O7)3(C6H6O7)(H2O)3]·9.5H2O

The reaction of lead(II) nitrate with trisodium citrate Na₃(C₆H₅O₇) in a 1:22.5 ratio at pH 4.8 provides crystals of {Na(H₂O)₃}[Pb₅(H₂O)₃(C₆H₅O₇)₃(C₆H₆O₇)]·9.5H₂O (1). The structure of 1 is two-dimensional and exhibits five distinct Pb(II) sites and four different modes of citrate bonding. The five lead sites all display hemidirected coordination geometries, that is, irregular distribution of neighboring oxygen atoms resulting in obvious gaps in the coordination spheres. Consequently, the lead coordination geometries exhibit proximal bonding to a number of oxygen donors, as well as distal interactions with nearest neighbors. The coordination numbers vary from 8 to 10, with ‘5+3’, ‘5+4’, ‘6+4’ and ‘7+3’ coordination modes where the first number refers to the proximal ligands and the second to the distal set. The four crystallographically distinct citrate groups include three with deprotonated carboxylate groups (C₆H₅O₇)³⁻ and one with a single protonated carboxyl group (C₆H₆O₇)². The citrate ligands bridge 3, 5, 7 and 7 lead sites. Three of the citrate groups exhibit tridentate chelation coordination to a lead site through two carboxylate oxygen donors and the hydroxyl groups. One citrate group projects an uncoordinated -OH group and a pendant protonated carboxyl group into the interlamellar domain. This latter carboxyl group coordinates to a sodium cation, which exhibits five coordinate geometry defined by three aqua ligands and the carbonyl oxygen of the -CO₂H groups in the basal plane and a citrate -OH donor in the apical position.     

The preparation, characterisation and low temperature X-ray structure of Ru6(η-μ4-CO)2(CO)13(η6-C6Me6)

The new organometallic cluster (η²-μ₄-CO)₂(CO)₁₃(η⁶-C₆Me₆) has been prepared by the thermolysis of Ru₃(CO)₁₂ with hexamethylbenzene in octane and characterised by a single crystal X-ray diffraction study. It is isostructural with the known cluster Ru₆(η²-μ₄-CO)₂(CO)₁₃(η⁶-C₆H₃Me₃) and the metal core constitutnts the same tetrahedral Ru₄ unit with two edge-bridging Ru atoms. The mesitylene derivative has been shown to undergo rearrangement to afford the octahedral carbido cluster Ru₆C(CO)₁₄(η⁶-C₆H₃Me₃), but this conversion is not observed for the new hexamethylbenzene derivative.     

Alkene rotation in [Ru(η-C5H5) (L2) (η-alkene][CF3SO3] with L2 = iPr- or pTol-diazabutadiene. X-ray crystal structure of [Ru(η-C5H5(pTol-DAB) (η-ethene][CF3SO3]

Reaction of RuCl(η⁵-C₅H₅(pTol-DAB) with AgOTf (OTf = CF₃SO₃) in CH₂Cl₂ or THF and subsequent addition of L′ (L′ = ethene (a), dimethyl fumarate (b), fumaronitrile (c) or CO (d) led to the ionic complexes [Ru(η⁵-C₅H₅)(pTol-DAB)(L′)][OTf] 2a, 2b and 2d and [Ru(η⁵-C₅H₅)(pTol-DAB)(fumarontrile-N)][OTf] 5c. With the use of resonance Raman spectroscopy, the intense absorption bands of the complexes have been assigned to MLCT transitions to the iPr-DAB ligand. The X-ray structure determination of [Ru(η⁵-C₅H₅)(pTol-DAB)(η²-ethene)][CF₃SO₃] (2a) has been carried out. Crystal data for 2a: monoclinic, space group P2₁/n with A = 10.840(1), b = 16.639(1), C = 14.463(2) Å, β = 109.6(1)°, V = 2465.6(5) ų, Z = 4. Complex 2a has a piano stool structure, with the Cp ring η⁵-bonded, the pTol-DAB ligand σN, σN′ bonded (Ru-N distances 2.052(4) and 2.055(4) Å), and the ethene η²-bonded to the ruthenium center (Ru-C distances 2.217(9) and 2.206(8) Å). The C = C bond of the ethene is almost coplanar with the plane of the Cp ring, and the angle between the plane of the Cp ring and the double of the ethene is 1.8(0.2)°. The reaction of [RuCl(η⁵-C₅H₅)(PPh)₃ with AgOTf and ligands L′ = a and d led to [Ru(η⁵-C₅H₅)(PPh₃)₂(L′)]OTf] (3a) and (3d), respectively. By variable temperature NMR spectroscopy the rottional barrier of ethene (a), dimethyl fumarate (b and fumaronitrile (c) in complexes [Ru(η⁵-C₅H₅)(L₂)(η²-alkene][OTf] with L₂ = iPr-DAB (a, 1b, 1c), pTol-DAB (2a, 2b) and L = PPh₃ (3a) was determined. For 1a, 1b and 2b the barrier is 41.5±0.5, 62±1 and 59±1 kJ mol⁻¹, respectively. The intermediate exchange could not be reached for 1c, and the ΔG^# was estimated to be at least 61 kJ mol⁻. For 2a and 3a the slow exchange could not be reached. The rotational barrier for 2a was estimated to be 40 kJ mol⁻. The rotational barier for methyl propiolate (HC≡CC(O)OCH₃) (k) in complex [Ru(η⁵-C₅H₅)(iPr-DAB) η²-HC≡CC(O)OCH₃)][OTf] (1k) is 45.3±0.2 kJ mol⁻¹. The collected data show that the barrier of rotational of the alkene in complexes 1a, 2a, 1b, 2b and 1c does not correlate with the strength of the metal-alkene interaction in the ground state.     

Synthesis, crystal structure and magnetic properties of the first structurally characterized 1,2-dithiocroconato-containing Cu(II) complex, [Cu(bpca)(H2O)]2[Cu(1,2-dtcr)2]·2H2O

The first crystal and molecular structure of a transition metal complex containing 1,2-dithiocroconate (1,2-dtcr, dianion of 1,2-dimercaptocylopent-1-ene-3,4,5-trione), [Cu(bpca)(H₂O)]₂[Cu(1,2-dtcr)₂]·2H₂O (where bpca is the bis(2-pyrdidylcarbonyl)amide anion), has been determined by single crystal X-ray diffraction methods. The compound crystallizesin the monoclinic syste, space group P2₁/c, with a = 11.661(3), b = 20.255(6), c = 8.265(3) Å, ß = 107.26(2)° and Z = 2. The structure is formally built of [Cu(1,2-dtcr)₂]²⁻ and [Cu(bpca)(H₂O)]⁺ ions and water of hydration. The copper atom of the anion is situated at a crystallographic inversion centre, bonded to four sulfur atoms in a planar, approximately square arrangement. In the cation the copper equatorial plane is formed by the three nitrogen atoms of the bpca ligand and a water oxygen atom. In addition there is a very weak axial bond to one of the sulfur atoms of a 1,2-dtcr ligand in the anion. Through these latter weak bonds each anion is connected to, and sandwiched between, two cations, resulting in neutral, trinuclear, centrosymmetric formula units. The triple-decker molecules are arranged in stacks along the crystallographic a-axis creating close contacts between the terminal copper atoms and bpca groups of the neighbouring molecules. This intermolecular interaction is, however, too weak to define the structure as a chain compound. The distance between adjacent copper atoms within the trinuclear unit is 4.189(1) Å, while the shortest intra-stack metal-metal separation between terminal copper atoms is 5.281(1) Å. Variable-temperature magnetic susceptibility measurements in the temperature r.2–140 K reveal that a Curie law is followed; with three non-interacting copper(II) ions in the formula unit.     

Reactivity of {(Ph3P)Pt[μ-η-H---SiH(Ar)]}2 (Ar=2-isopropyl-6-methylphenyl) with phosphines. X-ray crystal structure of trans-{(dppe)Pt[μ-SiH(Ar)]}2

The dinuclear Pt---Si complex {(Ph₃P)Pt{μ-η²-H---SiH(IMP)]}₂ (trans-1a–cis-1b=3:1; IMP=2-isopropyl-6-methylphenyl) reacted with basic phosphines such as 1,2-bis(diphenylphosphino)ethane (dppe) and dimethylphenylphosphine (PMe₂Ph) to afford different dinuclear Pt---Si complexes with loss of H₂, {(P)₂Pt[μ-SiH(IMP)]}₂ [P=dppe, trans-2a (major), cis-2b (trace); PMe₂Ph, 3 (trans only)]. Complexes 2 and 3 were characterized by multinuclear NMR spectroscopy and X-ray crystallography (2a). In contrast, the reaction of 1a,b with the sterically demanding tricyclohexylphosphine (PCy₃) afforded {(Cy₃P)Pt{μ-η²-H---SiH(IMP)]}₂ (trans-4a–cis-4b 2:1) analogous to 1a,b where the central Pt₂Si₂(μ-H)₂ core remains intact but the PPh₃ ligands have been replaced by PCy₃. Complexes 4a and 4b was characterized by multinuclear NMR and IR spectroscopies.     

Synthesis, solution behaviour and molecular structures of 16-electron closo-2-(Ph3P)-1-N,2-[μ-(η-CH2CH=Ch2)]-1-N-(σ-CH2CH=CH2)-2,1- RhCB10H10, the first η-olefinic monocarbon metallacarborane

The first η²-olefinic monocarbon metallacarbone closo-2-(Ph₃P)-1-N,2-[μ-(η²-CH₂CH=Ch₂)]-1-N-(σ-CH₂CH=CH₂)-2,1- RhCB₁₀H₁₀ has been prepared by the reaction of the dimeric anion {[Ph₃PRhB₁₀H₁₀CNH₂]₂-μ-H}⁻[PPN]⁺ with allyl bromide and characterized by a combination of spectroscopic methods and a single-crystal X-ray diffraction study. The variable temperature ¹H and ¹³C NMR studies revealed the fluxional behavior of the η²-olefinic complex in CD₂Cl₂ solution which is associated with the allyl side-chain exchange process.