Expression and characterization of chimeric spidroins from flagelliform-aciniform repetitive modules

Spiders can produce up to seven different types of silks or glues with different mechanical properties. Of these, flagelliform (Flag) silk is the most elastic, and aciniform (AcSp1) silk is the toughest. To produce a chimeric spider silk (spidroin) Flag_R-AcSp1_R, we fused one repetitive module of flagelliform silk from Araneus ventricosus and one repetitive module of aciniform silk from Argiope trifasciata. The recombinant protein expressed in E. coli formed silk-like fibers by manual-drawing. CD analysis showed that the secondary structure of Flag_R-AcSp1_R spidroin remained stable during the gradual reduction of pH from 7.0 to 5.5. The spectrum of FTIR indicated that the secondary structure of Flag_R-AcSp1_R changed from α-helix to β-sheet. The conformation change of Flag_R-AcSp1_R was similar to other spidroins in the fiber formation process. SEM analysis revealed that the mean diameter of the fibers was around 1 ~ 2 μm, and the surface was smooth and uniform. The chimeric fibers exhibited superior toughness (~33.1 MJ/m³) and tensile strength (~261.4 MPa). This study provides new insight into design of chimeric spider silks with high mechanical properties.     

Conservation of essential design features in coiled coil silks

Silks are strong protein fibers produced by a broad array of spiders and insects. The vast majority of known silks are large, repetitive proteins assembled into extended beta-sheet structures. Honeybees, however, have found a radically different evolutionary solution to the need for a building material. The 4 fibrous proteins of honeybee silk are small ( approximately 30 kDa each) and nonrepetitive and adopt a coiled coil structure. We examined silks from the 3 superfamilies of the Aculeata (Hymenoptera: Apocrita) by infrared spectroscopy and found coiled coil structure in bees (Apoidea) and in ants (Vespoidea) but not in parasitic wasps of the Chrysidoidea. We subsequently identified and sequenced the silk genes of bumblebees, bulldog ants, and weaver ants and compared these with honeybee silk genes. Each species produced orthologues of the 4 small fibroin proteins identified in honeybee silk. Each fibroin contained a continuous predicted coiled coil region of around 210 residues, flanked by 23-160 residue length N- and C-termini. The cores of the coiled coils were unusually rich in alanine. There was extensive sequence divergence among the bee and ant silk genes (<50% similarity between the alignable regions of bee and ant sequences), consistent with constant and equivalent divergence since the bee/ant split (estimated to be 155 Myr). Despite a high background level of sequence diversity, we have identified conserved design elements that we propose are essential to the assembly and function of coiled coil silks.     

Design, expression and solid-state NMR characterization of silk-like materials constructed from sequences of spider silk, Samia cynthia ricini and Bombyx mori silk fibroins

Silk has a long history of use in medicine as sutures. To address the requirements of a mechanically robust and biocompatible material, basic research to clarify the role of repeated sequences in silk fibroin in its structures and properties seems important as well as the development of a processing technique suitable for the preparation of fibers with excellent mechanical properties. In this study, three silk-like protein analogs were constructed from two regions selected from among the crystalline region of Bombyx mori silk fibroin, (GAGSGA)(2), the crystalline region of Samia cynthia ricini silk fibroin, (Ala)(12), the crystalline region of spider dragline silk fibroin, (Ala)(6), and the Gly-rich region of spider silk fibroin, (GGA)(4). The silk-like protein analog constructed from the crystalline regions of the spider dragline silk and B. mori silk fibroins, (A(6)SCS)(8), that constructed from the crystalline regions of the S. c.ricini and B. mori silk fibroins, (A(12)SGS)(4), that constructed from and the crystalline region of S. c.ricini silk fibroin and the glycine-rich region of spider dragline silk fibroin, (A(12)SGS)(4),were expressed their molecular weights being about 36.0 kDa, 17.0 kDa and 17.5 kDa, respectively in E. coli by means of genetic engineering technologies. (A(12)SCS)(4) and (A(12)SGS)(4 )undergo a structural transition from alpha-helix to beta-sheet on a change in the solvent treatment from trifluoroacetic acid (TFA) to formic acid (FA). However, (A(6)SCS)(8) takes on the beta-sheet structure predominantly on TFA treatment and FA treatment. Structural analysis was performed on model peptides selected from spider dragline and S. c.ricini silks by means of (13)C CP/MAS NMR.     

Evidence for diet effects on the composition of silk proteins produced by spiders

Silks are highly expressed, secreted proteins that represent a substantial metabolic cost to the insects and spiders that produce them. Female spiders in the superfamily Araneoidea (the orb-spinning spiders and their close relatives) spin six different kinds of silk (three fibroins and three fibrous protein glues) that differ in amino acid content and protein structure. In addition to this diversity in silks produced by different glands, we found that individual spiders of the same species can spin dragline silks (drawn from the spider's ampullate gland) that vary in content as well. Freely foraging ARGIOPE: argentata (Araneae: Araneoidea), collected from 13 Caribbean islands, produced dragline silk that showed an inverse relationship between the amount of serine and glycine they contained. X-ray microdiffraction of the silks localized these differences to the amorphous regions of the protein that are thought to lend silks their elasticity. The crystalline regions of the proteins, which lend silks their strength, were unaffected. Laboratory experiments with ARGIOPE: keyserlingi suggested that variation in silk composition reflects the type of prey the spiders were fed but not the total amount of prey they received. Hence, it may be that the amino acid content (and perhaps the mechanical properties) of dragline silk spun by ARGIOPE: directly reflect the spiders' diet. The ability to vary silk composition and, possibly, function is particularly important for organisms that disperse broadly, such as Argiope, and that occupy diverse habitats with diverse populations of prey.     

Comparison of fibroin cDNAs from webspinning insects: insight into silk formation and function

Embiopterans (webspinning insects) are renowned for their prolific use of silk. These organisms spin silk to construct elaborate networks of tubes in which they live, forage, and reproduce. The silken galleries are essential for protecting these soft-bodied insects from predators and other environmental hazards. Despite the ecological importance of embiopteran silk, very little is known about its constituent proteins. Here, we characterize the silk protein cDNAs from four embiopteran species to better understand the function and evolution of these adaptive molecules. We show that webspinner fibroins (silk proteins) are highly repetitive in sequence and possess several conserved characteristics, despite differences in habitat preferences across species. The most striking similarities are in the codon usage biases of the fibroin genes, particularly in the repetitive regions, as well as sequence conservation of the carboxyl-terminal regions of the fibroins. Based on analyses of the silk genes, we propose hypotheses regarding codon bias and its effect on the translation and replication of these unusual genes. Furthermore, we discuss the significance of specific fibroin motifs to the mechanical and structural characteristics of silk fibers. Lastly, we report that the conservation of webspinner fibroin carboxyl-terminal regions suggests that fiber formation may occur through a mechanism analogous to that found in Lepidoptera. From these results, insight is gained into the tempo and mode of evolution that has shaped embiopteran fibroins.     

Spider flagelliform silk: lessons in protein design, gene structure, and molecular evolution

Spiders spin multiple types of silks that are renowned for their superb mechanical properties. Flagelliform silk, used in the capture spiral of an orb-web, is one of the few silks characterized by both cDNA and genomic DNA data. This fibroin is composed of repeating ensembles of three types of amino acid sequence motifs. The predominant subrepeat, GPGGX, likely forms a beta-turn, and tandem arrays of these turns are thought to create beta-spirals. These spring-like helices may be critical for the exceptional ability of capture silk to stretch and recoil. Each ensemble of motifs was found to correspond to a different exon within the flagelliform gene. The pattern of sequence similarity among exons indicates intragenic concerted evolution. Surprisingly, the introns between the iterated exons are also homogenized with each other. This unusual molecular architecture in the flagelliform silk gene has implications for the evolution and maintenance of spider silk proteins.     

Biosynthesis and cocoon-export of a recombinant globular protein in transgenic silkworms

A gene construct was made by fusing the coding sequence of the red fluorescent protein (DsRed) to the exon 2 of the fibrohexamerin gene (fhx), that encodes a subunit of fibroin, the major silk protein of the silkworm Bombyx mori. The fusion gene was inserted into a piggyBac vector to establish a series of transgenic lines. The expression of the transgene was monitored during the course of larval life and was found restricted to the posterior silk gland cells as the endogenous fhx gene, in all the selected transgenic lines. The exogenous polypeptide was secreted into the lumen of the posterior silk gland together with fibroin, and further exported with the silk proteins as a foreign constituent of the cocoon fiber. The capacity of DsRed to emit fluorescence in the air-dried silk thread led to show that the recombinant protein was distributed over the whole length of the fiber. A remarkable property of the system lies in the localization of the globular protein at the periphery of the silk thread, allowing its rapid and easy recovery in aqueous solutions, without dissolving fibroin. The procedure represents a novel and promising strategy for the production of massive recombinant proteins of biomedical and pharmaceutical interest, with reduced cost.     

Silks produced by insect labial glands

Insect silks are secreted from diverse gland types; this chapter deals with the silks produced by labial glands of Holometabola (insects with pupa in their life cycle). Labial silk glands are composed of a few tens or hundreds of large polyploid cells that secrete polymerizing proteins which are stored in the gland lumen as a semi?liquid gel. Polymerization is based on weak molecular interactions between repetitive amino acid motifs present in one or more silk proteins; cross?linking by disulfide bonds may be important in the silks spun under water. The mechanism of long?term storage of the silk dope inside the glands and its conversion into the silk fiber during spinning is not fully understood. The conversion occurs within seconds at ambient temperature and pressure, under minimal drawing force and in some cases under water. The silk filament is largely built of proteins called fibroins and in Lepidoptera and Trichoptera coated by glue?type proteins known as sericins. Silks often contain small amounts of additional proteins of poorly known function. The silk components controlling dope storage and filament formation seem to be conserved at the level of orders, while the nature of polymerizing motifs in the fibroins, which determine the physical properties of silk, differ at the level of family and even genus. Most silks are based on fibroin β?sheets interrupted with other structures such as α?helices but the silk proteins of certain sawflies have predominantly a collagen?like or polyglycine II arrangement and the silks of social Hymenoptera are formed from proteins in a coiled coil arrangement.     

Mechanical features of various silkworm crystalline considering hydration effect via molecular dynamics simulations

Silk materials are receiving significant attention as base materials for various functional nanomaterials and nanodevices, due to its exceptionally high mechanical properties, biocompatibility, and degradable characteristics. Although crystalline silk regions are composed of various repetitive motifs with differing amino acid sequences, how the effect of humidity works differently on each of the motifs and their structural characteristics remains unclear. We report molecular dynamics (MD) simulations on various silkworm fibroins composed of major motifs (i.e. (GAGAGS)_n, (GAGAGA)_n, and (GAGAGY)_n) at varying degrees of hydration, and reveal how each major motifs of silk fibroins change at each degrees of hydration using MD simulations and their structural properties in mechanical perspective via steered molecular dynamics simulations. Our results explain what effects humidity can have on nanoscale materials and devices consisting of crystalline silk materials.     

Essential role of duplications of short motif sequences in the genomic evolution of Bombyx mori

Summary The Bombyx fibroin gene has a discrete mosaic structure of various repetitive sequences, which may have evolved through various repeating arrangements. Detailed sequence analysis of the fibroin gene containing coding and noncoding regions revealed that the whole sequence could be arranged as an array of short repetitive sequences. A portion of the intron of the fibroin gene is one of interspersed repetitive elements. We cloned a 1.5-kb DNA fragment of the Bombyx genome that contains interspersed elements homologous to the intron sequence. Sequence comparison between the intron and the 1.5-kb fragment shows that partial duplication has frequently occurred in evolutionary progress, and the resultant repetitive blocks of short motif sequences are abundant in the genome. These facts suggest that tandem duplication of the short motif sequence is an important rearrangement in genomic evolution of the fibroin gene. Offprint requests to: S. Ichimura     

Araneoid egg case silk: a fibroin with novel ensemble repeat units from the black widow spider, Latrodectus hesperus

Araneoid spiders use specialized abdominal glands to manufacture up to seven different protein-based silks/glues that have diverse physical properties. The fibroin sequences that encode egg case fibers (cover silk for the egg case sac) and the secondary structure of these threads have not been previously determined. In this study, MALDI tandem TOF mass spectrometry (MS/MS) and reverse genetics were used to isolate the first egg case fibroin, named tubuliform spidroin 1 (TuSp1), from the black widow spider, Latrodectus hesperus. Real-time quantitative PCR analysis demonstrates TuSp1 is selectively expressed in the tubuliform gland. Analysis of the amino acid composition of raw egg case silk closely aligns with the predicted amino acid composition from the primary sequence of TuSp1, which supports the assertion that TuSp1 represents a major component of egg case fibers. TuSp1 is composed of highly homogeneous repeats that are 184 amino acids in length. The long stretches of polyalanine and glycine-alanine subrepeats, which account for the crystalline regions of minor ampullate and major ampullate fibers, are very poorly represented in TuSp1. However, polyserine blocks and short polyalanine stretches were highly iterated within the primary sequence, and (13)C NMR spectroscopy demonstrated that the majority of alanine was found in a beta-sheet structure in post-spun egg case silk. The TuSp1 repeat unit does not display substantial sequence similarity to any previously described fibroin genes or proteins, suggesting that TuSp1 is a highly divergent member of the spider silk gene family.     

Cloning of the fibroin gene from the oak silkworm, Antheraea yamamai and its complete sequence

The nucleotide sequences containing an entire genomic region and 5 upstream region of Antheraea yamamai fibroin gene have been determined. The gene consists of an initial exon encoding 14 amino acids, an intron (150 bp), and a long second exon coding for 2641 amino acids. The fibroin coding sequence shows a specialized organization with a highly repetitive region flanked by non repetitive 5 and 3 ends. Northern blot analyses confirmed that fibroin gene is actively expressed in the posterior silk gland of the final instar larvae of Antheraea yamamai.     

Sequence and evolution of the Drosophila pseudoobscura glycerol-3-phosphate dehydrogenase locus

The Gpdh genomic region has been cloned and sequenced in Drosophila pseudoobscura. A total of 6.8 kb of sequence was obtained, encompassing all eight exons of the gene. The exons have been aligned with the sequence from D. melanogaster, and the rates of synonymous and nonsynonymous substitution have been compared to those of other genes sequenced in these two species. Gpdh has the lowest rate of nonsynonymous substitution yet seen in genes sequenced in both D. pseudoobscura and D. melanogaster. No insertion/deletion events were observed, and the overall architecture of the gene (i.e., intron sites, etc.) is conserved. An interesting amino acid reversal was noted between the D. melanogaster Fast allele and the D. pseudoobscura gene.     

Comparative genomics of yeast species: new insights into their biology

The genomes of two hemiascomycetous yeasts (Saccharomyces cerevisiae and Candida albicans) and one archiascomycete (Schizosaccharomyces pombe) have been completely sequenced and the genes have been annotated. In addition, the genomes of 13 more Hemiascomycetes have been partially sequenced. The amount of data thus obtained provides information on the evolutionary relationships between yeast species. In addition, the differential genetic characteristics of the microorganisms explain a number of distinctive biological traits. Gene order conservation is observed between phylogenetically close species and is lost in distantly related species, probably due to rearrangements of short regions of DNA. However, gene function is much more conserved along evolution. Compared to S. cerevisiae and S. pombe, C. albicans has a larger number of specific genes, i.e., genes not found in other organisms, a fact that can account for the biological characteristics of this pathogenic dimorphic yeast which is able to colonize a large variety of environments.     

Expression of the Japanese oak silkworm Antheraea yamamai fibroin gene in the domesticated silkworm Bombyx mori

Abstract To understand the evolutionary conservation of the gene expression mechanism and secretion machinery between Antheraea and Bombyx fibroins, we introduced the genomic A. yamamai fibroin gene into the domesticated silkworm, B. mori. The spliced A. yamamai fibroin mRNA appeared only in the posterior region of the silk gland of the transgenic silkworm, suggesting that the functions of the fibroin promoter region and the splicing machinery are conserved between these two species. The A. yamamai fibroin protein was detected in the lumen of the silk gland of the transgenic silkworm, albeit at lower levels compared with the B. mori‐type fibroin. We found a strong degeneration of the posterior region of the silk gland of the transgenic silkworm. As a result, the cocoon shell weight was much lower in the transgenic silkworm than in the non‐transgenic line. These results indicate that the promoter function and splicing machinery are well conserved between A. yamamai and B. mori but that the secretion mechanism of fibroin is diversified between the two.