The effects of a primary-treated municipal effluent on the immune system of rainbow trout (Oncorhynchus mykiss): exposure duration and contribution of suspended particles

Municipal sewage effluents are complex mixtures of contaminants known to disrupt both immune and endocrine functions in aquatic organisms. The present study sought to determine the impacts of municipal effluent on the immune systems of juvenile rainbow trout (Oncorhynchus mykiss), by exposing specimens to low concentrations (0.01%, 0.1%, 1% or 10%) of sewage effluent for periods of 28 or 90 days. The soluble and insoluble fractions of the effluent were also studied to assess the contribution of fractions rich in microorganisms and particles on fish immune systems. To this end, the trout were also exposed to soluble and insoluble fractions of the effluent for a period of 28 days. Immunocompetence was assessed by the following three parameters: phagocytosis, natural cytotoxic cells (NCC) and blastogenesis of lymphocytes under mitogen stimulation. Fish exposed to the 1% sewage effluent concentration for 28 days had enhanced phagocytic activity; at 90 days, phagocytic activity was reduced. T and B lymphocyte proliferation in fish from both groups was similarly stimulated. Phagocytosis and NCC activities were influenced more by the insoluble fraction than the soluble fraction of the effluent. Conversely, mitogen-stimulated T lymphocyte proliferation was enhanced in cells of fish exposed to the soluble fraction of the effluents, with a dampening effect on the insoluble (particulate) fraction of the effluent. In conclusion, the effects of the effluent and its fractions were higher at the cellular-mediated immunity level than at the acquired immunity level. Immunotoxicity data on the soluble fraction of the effluent were more closely associated to data on the unfractionated effluent, but the contribution of the particulate fraction could not be completely ignored for phagocytosis and B lymphocyte proliferation.     

Quantitative observations of heterogeneities in Pseudomonas aeruginosa biofilms.

Heterogeneity in a Pseudomonas aeruginosa biofilm was quantified by measuring distributions of thickness in biofilm samples and a distribution of particle sizes in effluent samples. The mean steady-state thickness was approximately 33 microns, but individual measurements ranged from 13.3 to 60.0 microns. Particles exceeding 100 microns3 were observed in the reactor effluent. The results reveal a rough biofilm surface and indicate that most biomass detaches in the form of multicellular particles.     

Comparison of microporous filters for concentration of viruses from wastewater.

The 1-MDS Virosorb filter and the 50S and 30S Zeta-plus filters, all with a net positive charge, were compared with the negatively charged Filterite filter for concentration of naturally occurring coliphages and animal viruses from sewage effluent. When Filterite filters were used, the effluent was adjusted to pH 3.5 and AlCl3 was added before filtration to facilitate virus adsorption. No adjustment was required with the positively charged filters. Sets of each filter type were eluted with 3% beef extract (pH 9.5) or eluted with 0.05 M glycine (pH 11.5). A maximum volume of 19 liters could be passed through 142-mm diameter Filterite filters before clogging, whereas only 11, 11, and 15 liters could be passed through the 1-MDS, 50S, and 30S filters, respectively. For equal volumes passed through the filters, coliphage recoveries were 14, 15, 18, and 37% in primary effluent and 40, 97, 50, and 46% in secondary effluent for the Filterite , 1-MDS, 50S, and 30S filters, respectively. No statistically significant difference was observed in the recovery of animal viruses among the filters from secondary effluent, whereas in the Filterite and 50S filters, higher numbers of viruses from primary effluent were recovered than in the 1-MDS and 30S filters in two of three collections. Glycine was found to be a less-efficient eluent than beef extract in the recovery of naturally occurring viruses.     

Comparison of microporous filters for concentration of viruses from wastewater

The 1-MDS Virosorb filter and the 50S and 30S Zeta-plus filters, all with a net positive charge, were compared with the negatively charged Filterite filter for concentration of naturally occurring coliphages and animal viruses from sewage effluent. When Filterite filters were used, the effluent was adjusted to pH 3.5 and AlCl3 was added before filtration to facilitate virus adsorption. No adjustment was required with the positively charged filters. Sets of each filter type were eluted with 3% beef extract (pH 9.5) or eluted with 0.05 M glycine (pH 11.5). A maximum volume of 19 liters could be passed through 142-mm diameter Filterite filters before clogging, whereas only 11, 11, and 15 liters could be passed through the 1-MDS, 50S, and 30S filters, respectively. For equal volumes passed through the filters, coliphage recoveries were 14, 15, 18, and 37% in primary effluent and 40, 97, 50, and 46% in secondary effluent for the Filterite , 1-MDS, 50S, and 30S filters, respectively. No statistically significant difference was observed in the recovery of animal viruses among the filters from secondary effluent, whereas in the Filterite and 50S filters, higher numbers of viruses from primary effluent were recovered than in the 1-MDS and 30S filters in two of three collections. Glycine was found to be a less-efficient eluent than beef extract in the recovery of naturally occurring viruses.     

The effect of electrostatic charge of food particles on capture efficiency by Oxyrrhis marina Dujardin (dinoflagellate)

Laboratory experiments were carried out to investigate the effect of food quality, measured as surface charge of the particles, on capture efficiency and ingestion rate by the heterotrophic dinoflagellate Oxyrrhis marina. Fluorescent particles in two size classes of around 1 and 4 microm and of 7 different qualities were offered to the flagellate: carbohydrate and albumin particles, the algae Synechocystis spec. and Chlorella spec., carboxylated microspheres, silicate particles and bacteria. Rates of particle uptake showed significant differences depending on particle size and quality, and ranged from 0 to 4 particles cell(-1) h(-1). Ingestion rates were up to 4 times higher for 4 pm particles than for 1 microm particles, which indicates strong size-selective feeding. Our main result is that the surface charge or zeta potential, of artificial particles, i.e. carboxylated microspheres (> or = -107 mV) and silicate particles, strongly differ from more natural and natural food (< or = -17 mV). For both size classes Oxyrrhis had ingestion rates up to 4 times higher for particles with less negative charge, such as albumin particles or algae. Thus, the zeta potential of the model food should be considered in experimental design. Particles with a zeta potential similar to that of natural food, e.g. albumin, seem to be the preferred model food.     

Effect of electrostatic charge on the contamination of plastic food containers by airborne bacterial spores

Electrostatic charge of approximately -10 kv was produced by friction on polystyrene food container samples. This charge quickly decayed to a lower, more stable, level. Exposure of samples to positively charged red and negatively charged green fluorescent particles resulted in a particle-distribution pattern on the plastic surface. The dynamic attraction of fluorescent particles was illustrated by time-lapse photography. Similar distribution patterns of airborne bacterial spores were shown to develop. In controlled bacterial aerosol exposure tests, an increase in surface contamination of the plastic samples was found to be quantitatively related to an increase in negative electrostatic charge on the plastic. Static charge was found to accumulate on plastic food containers during their manufacture, and to remain indefinitely on many of the finished products. This charge was of the intensity and polarity to attract positively charged bacterial cells if such particles were present in the air.     

Advanced primary treatment of waste water using a bio‐flocculation‐adsorption sedimentation process

An advanced primary treatment process for a municipal waste water was systematically studied, using a bio‐flocculation‐adsorption, sedimentation and stabilzation process (BSS). It was shown that the organic removal efficiency was higher than that of the traditional primary treatment processes but lower than that of the traditional secondary treatment processes. Both adsorption and bio‐flocculation played an important role in the removal of pollutants. The activated sludge within the bio‐flocculation‐adsorption tank could be considered a bio‐flocculent which improved the quality of the effluent from the primary treatment process. As the effluent of the BSS process did not meet the requirements for a typical secondary effluent, the process may be regarded as an advanced (or enhanced) primary treatment process, suitable for waste water containing a high concentration of suspended solids and colloidal particles.     

Cyanobacteria passage through drinking water filters during perturbation episodes as a function of cell morphology, coagulant and initial filter loading rate

Eight pilot-scale in-line filtration trials were performed to evaluate the passage of cyanobacterial cells through drinking water filters after sudden increases in hydraulic loading rates. Trials were performed at 30 °C using two coagulant combinations (aluminum sulfate and cationic polymer or ferric chloride and cationic polymer), two initial filter loading rates (7 or 10 m/h) and two species of morphologically different cyanobacteria (Microcystis aeruginosa or Anabaena flos aquae). The filter was perturbed by instantaneously increasing the hydraulic loading rate by 50%. Filter influent and effluent water qualities were characterized by measuring turbidity, particles and chlorophyll a. The observed post-perturbation filter effluent chlorophyll a peaks were 1.6–48 times greater than the pre-perturbation averages. Chlorophyll a peaks were larger for M. aeruginosa than for A. flos aquae. Chlorophyll a peaks were also larger for the higher (10 m/h) than for the lower (7 m/h) initial filter loading rate. The post-perturbation effluent turbidity peaks were 1.4–7.2 times greater than the pre-perturbation averages. The post-perturbation effluent particle peaks were 6.5–25 times greater than the pre-perturbation averages. These results indicate that particles were a more sensitive indicator of cyanobacterial passage than turbidity.     

Increasing sensitivity of the Ortho analytical cytofluorograph by modifying the fluid system

By adding Teflon tubing to the effluent line of the Ortho 50H analytical cytofluorograph, we were able to increase the sensitivity of fluorescence and scatter detection threefold without compromising resolution. By increasing sheath backpressure (resistance), the additional tubing increases particle residence time within the detection area and thereby increases the total photon emission density per particle. In addition, the longer, wider tubing dampens the stream-destabilizing effects of minor obstructions in or movement of the effluent line. This increase in sensitivity and stability is desirable in applications requiring detection of particles exhibiting low-level fluorescence.     

Formation of metabolites during biodegradation of linear alkylbenzene sulfonate in an upflow anaerobic sludge bed reactor under thermophilic conditions.

Biodegradation of linear alkylbenzene sulfonate (LAS) was shown in an upflow anaerobic sludge blanket reactor under thermophilic conditions. The reactor was inoculated with granular biomass and fed with a synthetic medium and 3 micromol/L of a mixture of LAS with alkylchain length of 10 to 13 carbon atoms. The reactor was operated with a hydraulic retention time of 12 h with effluent recirculation in an effluent to influent ratio of 5 to 1. A sterile reactor operated in parallel revealed that sorption to sludge particles initially accounted for a major LAS removal. After 8 days of reactor operation, the removal of LAS in the reactor inoculated with active granular biomass exceeded the removal in the sterile reactor inoculated with sterile granular biomass. The effect of sorption ceased after 185 to 555 h depending on the LAS homologs. 40% of the LAS was biodegraded, and the removal rate was 0.5 x 10(-6) mol/h/mL granular biomass. Acidified effluent from the reactor was subjected to dichloromethane extraction followed by gas chromatography/mass spectrometry. Benzenesulfonic acid and benzaldehyde were detected in the reactor effluent from the reactor with active granular biomass but not in the sterile and unamended reactor effluent. Benzenesulfonic acid and benzaldehyde are the first identified degradation products in the anaerobic degradation of LAS.     

The effect of inhibition of RNA synthesis by actinomycin D on the population of basic polypeptides of the 30S unclear ribonucleoprotein particles

In rats injected intraperitoneally with actinomycin D (2 mg/kg body weight) 12 h earlier, the yield of the 30S ribonucleoprotein particles isolated from liver nuclei by extraction with 0.1 M NaCl at pH 8.0 decreased by 60 per cent. The protein-to-RNA ratio of these particles increased to 32:1 from the ratio 4.4:1 found in the same particles isolated from the nuclei of liver of control rats. The particles isolated from the liver nuclei of rats injected with actinomycin D were depleted of all charge isomers of the two most prominent polypeptides (33,000 and 39,000 daltons) present in the particles of liver of control animals. The most abundant protein in these particles was a 43,000 dalton polypeptide. This polypeptide is the least prominent of the 3 major polypeptides present in the control particles. The same charge isomers of the 43,000 dalton polypeptide were present in the nuclear ribonucleoprotein particles isolated from the liver of control animals and from the liver of animals treated with actinomycin D 12 h earlier. In control animals the nuclear ribonucleoprotein monoparticles isolated from kidney contained 3 major polypeptides of the same molecular weight with the same distribution of their charge isomers as were present in the particles isolated from liver nuclei. The injection of actinomycin D 12 h earlier was without any effect on the protein composition of the 30S nuclear ribonucleoprotein particles of rat kidney.     

Assessment of effluent turbidity in mesophilic and thermophilic activated sludge reactors - origin of effluent colloidal material

Two lab-scale plug flow activated sludge reactors were run in parallel for 4 months at 30 and 55 degrees C. Research focussed on: (1) COD (chemical oxygen demand) removal, (2) effluent turbidity at both temperatures, (3) the origin of effluent colloidal material and (4) the possible role of protozoa on turbidity levels. Total COD removal percentages over the whole experimental period were 66+/-7% at 30 degrees C and 53+/-11% at 55 degrees C. Differences in total COD removal between both systems were due to less removal of soluble and colloidal COD at 55 degrees C compared to the reference system. Thermophilic effluent turbidity was caused by a combination of influent colloidal particles that were not effectively retained in the sludge flocs, and erosion of the thermophilic activated sludge itself, as shown by denaturing gradient gel electrophoresis (DGGE) profiles. DGGE analysis of PCR-amplified 16S rDNA fragments from mesophilic and thermophilic sludge differed, indicating that different microbial communities were present in the two reactor systems. The effects of protozoal grazing on the effluent turbidity of both reactors was negligible and thus could not account for the large turbidity differences observed.     

Effect of pectin charge density on formation of multilayer films with chitosan

The effect of pectin charge density on the formation of multilayer films with chitosan (PEC/CHI) is studied by means of electro-optics. Pectins of low (21%) and high (71%) degrees of esterification, which are inversely proportional to the pectin charge density, are used to form films on colloidal beta-FeOOH particles at pH 4.0 when the CHI is fully ionized. We find that, after deposition of the first 3-4 layers, the film thickness increases linearly with the number of adsorbed layers. However, the increase in the film thickness is larger when the film is terminated with CHI. Irregular increase of the film thickness is more marked for the PEC with higher density of charge. Oscillation in the electrical polarizability of the film-coated particles with the number of deposited layers is also registered in the PEC/CHI films. The charge balance of the multilayers, calculated from electrical polarizability of the film-coated particles, is positive, with larger excess of positive charge within the film constructed from CHI and less charged PEC. This is attributed to the ability of CHI to diffuse into the film at each deposition step. Despite the CHI diffusion, the film thickness increases linearly due to the dissolution of unstable PEC/CHI complexes from the film surface.     

Electronic and utermöhl comparative techniques in quantitative analysis of freshwater particulates

The Coulter Counter Model B and the Millipore Particle Measurement Computer System were compared with the Utermöhl technique in counting and sizing test objects and suspended freshwater particulate matter. Replicate samples of lake water and pulp mill effluent were analyzed with the electronic instruments for an estimate of counting error % MathType!MTEF!2!1!+-% feaafiart1ev1aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLn% hiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr% 4rNCHbGeaGqiVu0Je9sqqrpepC0xbbL8F4rqqrFfpeea0xe9Lq-Jc9% vqaqpepm0xbba9pwe9Q8fs0-yqaqpepae9pg0FirpepeKkFr0xfr-x% fr-xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaWaaeWaaeaada% WcaaqaaiGacofaciGGfbGaaiOlaiaacshacaGGUaGaaiymaiaaccda% caGGWaaabaGabiiEayaaraaaaaGaayjkaiaawMcaaaaa!3EB7!\[\left( {\frac{{\operatorname{S} \operatorname{E} .t.100}}{{\bar x}}} \right)\] Coulter Counter error for determinations of number, volume, and diameter of homogeneous particles was less than io%, and for natural populations of freshwater particles, less than 2o%. Millipore errors of number, area, and horizontal chord were roughly twice these values. Precision was least at low concentration of particles. In practical applications, pulp mill effluent analyses were characterized by close correlation between electronic methods of counting, but lake water particle determinations failed to relate. Microscope counts and sizes of freshwater particles were generally unrelated to electronic measurements. A definite electronic instrument specificity for homogeneous particles was apparent. Wide variations in determinations of characteristics by electronic and manual methods existed. The greatest problem in the. estimation of freshwater biomass is the determination of the unknown detrital fraction.     

Some properties of mitochondria, mitoplasts and submitochondrial particles of different polarities from plant tissues

Irrespective of the starting material, i.e. washed mitochondria, purified mitochondria or mitoplast from Solanum tuberosum L., submitochondrial particles of well-defined polarities can be generated by French press treatment in low-salt medium or by sonication in high-salt medium. The first treatment will result in submitochondrial particles which are more than 80% right-side-out (right-side-out particles), the second in submitochondrial particles that are more than 80% inside-out (inside-out particles). The isoelectric point (pI = 4.0) of the inside-out particles measured by cross-partition is distinctly different from the isoelectric points of the other mitochondrial membranes which exhibit pI values between 4.5 and 4.7. The surface charge density measured by 9-aminoacridine fluorescence varies in the same order from −27 mC · m⁻² for Percoll-purified mitochondria to −51 mC · m⁻² for both right-side-out and inside-out particles. Even though the charge densities for the two surfaces of the inner membrane are similar, inside-out particles are much more negatively charged at pH 7.0, since they are 6-times larger. These results clearly demonstrate that it is possible to obtain submitochondrial particles of various polarities and sizes which in turn constitute valuable tools for the study of lateral and transverse asymmetry of the inner mitochondrial membrane.     

Physico-chemical and functional characteristics of a subfraction of low-density lipoproteins isolated by ion-exchange column chromatography

Fractionation of human blood plasma low density lipoproteins (LDL) was performed by ion-exchange chromatography, using a linear NaCl gradient. It was shown that the binding of LDL subfractions eluted with a low ionic strength buffer (i.e., containing the particles with a lower negative charge) to B, E-receptors of fibroblasts was more effective than that of subfractions eluted with a high ionic strength buffer (i.e., containing the particles with a higher negative charge). The LDL particles with a lower negative charge had lower values of flotation coefficients (according to analytical ultracentrifugation data), smaller dimensions (according to gradient gel electrophoresis data) and a lower phospholipid/protein ratio (w/w). The experimental results suggest that LDL subfractions having different electrical parameters of the particle surface also differ in other physicochemical properties and seem to play a different role in atherogenesis.     

Layer-by-layer deposition of oppositely charged polyelectrolytes on the surface of condensed DNA particles.

DNA can be condensed with an excess of poly-cations in aqueous solutions forming stable particles of submicron size with positive surface charge. This charge surplus can be used to deposit alternating layers of polyanions and polycations on the surface surrounding the core of condensed DNA. Using poly-L-lysine (PLL) and succinylated PLL (SPLL) as polycation and polyanion, respectively, we demonstrated layer-by-layer architecture of the particles. Polyanions with a shorter carboxyl/backbone distance tend to disassemble binary DNA/PLL complexes by displacing DNA while polyanions with a longer carboxyl/backbone distance effectively formed a tertiary complex. The zeta potential of such complexes became negative, indicating effective surface recharging. The charge stoichiometry of the DNA/PLL/SPLL complex was found to be close to 1:1:1, resembling poly-electrolyte complexes layered on macrosurfaces. Recharged particles containing condensed plasmid DNA may find applications as non-viral gene delivery vectors.     

Effects of solid-phase mass transfer on the performance of a stirred anaerobic sequencing batch reactor containing immobilized biomass

This work reports on experiments for an anaerobic sequencing batch reactor containing immobilized biomass which aimed at verifying the effects of solid-phase mass transfer on the reactor's overall performance. Four experiments were carried out at 30 degrees C with cubic polyurethane foam particles previously inoculated with anaerobic biomass. Different solid-phase mass transfer conditions were reached in each experiment by varying the size of the bioparticle from 0.5 to 3.0 cm. The reactor was fed with a low-strength synthetic wastewater containing protein, carbohydrates and lipid and the effects of mass transfer were evaluated through dynamic substrate concentration profiles during 8-hour batch cycles. A modified first-order kinetic model provided a good representation of the behavior of the dynamic concentration profiles. The solid-phase mass transfer was found to slightly affect the concentration of effluent organic matter expressed as chemical oxygen demand (COD). The concentration of residual effluent substrate increased as the size of the bioparticle was increased. The cycle time was not affected as the size of the bioparticle was increased from 0.5 to 2.0 cm. However, it was found that the cycle time in a reactor with 3.0-cm cubic particles should be higher than that required in systems with smaller particles. The apparent first-order kinetic parameter was estimated as 0.59+/-0.01 h(-1) for experiments with bioparticle sizes ranging from 0.5 to 2.0 cm, while a value of 0.48 h(-1) was obtained in the experiment with 3.0-cm bioparticles.     

Voltage dependence of intramembrane charge movement and conductance activation of batrachotoxin-modified sodium channels in frog node of Ranvier

Sodium current and sodium channel intramembrane gating charge movement (Q) were monitored in voltage-clamped frog node of Ranvier after modification of all sodium channels by batrachotoxin (BTX). BTX caused an approximately threefold increase in steepness of the Q vs. voltage relationship and a 50-mV negative shift in its midpoint. The maximum amount of intramembrane charge was virtually identical before and after BTX treatment. BTX treatment eliminated the charge immobilization observed in untreated nodes after relatively long depolarizing pulses and slowed the rate of OFF charge movement after a pulse. After BTX treatment, the voltage dependence of charge movement was the same as the steady-state voltage dependence of sodium conductance activation. The observations are consistent with the hypothesis that BTX induces an aggregation of the charged gating particles associated with each channel and causes them to move as a unit having approximately three times the average valence of the individual particles. Movement of this single aggregated unit would open the BTX-modified sodium channel.     

Perturbation of a collisional plasma by exterior bodies in a uniform external electric field

The charging of a metal sphere in a weakly ionized collisional plasma in a uniform external electric field is investigated with allowance for the effect of the space charge field and ionization-recombination processes. The sphere charge and the spatial distributions of charged plasma particles are calculated both numerically and analytically (for some particular cases) for the case of a strong external field. It is found that the size of the perturbed plasma region is determined by the external field and the intensity of recombination processes. It is shown that the total electric charge (the sphere charge plus the plasma space charge) is zero in accordance with predictions of the theory of static currents in a conducting medium.